scholarly journals The Use of Collagen with High Concentration in Cartilage Tissue Engineering by Means of 3D-Bioprinting

2021 ◽  
Vol 15 (5) ◽  
pp. 493-502
Author(s):  
E. V. Isaeva ◽  
E. E. Beketov ◽  
V. V. Yuzhakov ◽  
N. V. Arguchinskaya ◽  
A. A. Kisel ◽  
...  
Keyword(s):  
Granulomatous Inflammation ◽  
Small Cells ◽  
Cartilage Tissue ◽  
3D Bioprinting ◽  
High Concentration ◽  
Tissue Scaffold ◽  
Scaffold Fabrication ◽  
Morphological Criteria

Abstract 3D-bioprinting is a promising technology for a tissue scaffold fabrication in the case of damaged tissue/organ replacement. Collagen is one of the most appropriate hydrogel for the purpose, due to its exceptional biocompatibility. However, the use of collagen with conventionally low concentration makes bioprinting process difficult and does not provide its high accuracy. The purpose of the study was evaluation of suitability of collagen with high concentration in case of chondrocyte-laden scaffold fabrication via 3D-bioprinting for cartilage regeneration in vitro and in vivo. The results of the study showed that inherent porosity of 4% collagen was not enough for cell survival in the case of long-term incubation in vitro. With the beginning of the scaffold incubation, cell migration to the surface and out of the scaffold was observed. The residual cells died mostly within 4 weeks. As for in vivo study, in 2 weeks after implantation of the scaffold, a weak granulomatous inflammation was observed. In 6 weeks, a connective tissue was formed in the area of implantation. In the tissue, macrophages and groups of small cells with round nuclei were found. In accordance with morphological criteria, these cells could be considered as young chondrocytes. However, its amount was not enough to initiate the formation of cartilage.

scholarly journals 3D bioprinting dual-factor releasing and gradient-structured constructs ready to implant for anisotropic cartilage regeneration

2020 ◽  
Vol 6 (37) ◽  
pp. eaay1422 ◽  
Author(s):  
Ye Sun ◽  
Yongqing You ◽  
Wenbo Jiang ◽  
Bo Wang ◽  
Qiang Wu ◽  
...  
Keyword(s):  
Large Scale ◽  
Structural Integrity ◽  
Three Dimensional ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
3D Bioprinting ◽  
Deep Layers ◽  
Joint Prostheses

Cartilage injury is extremely common and leads to joint dysfunction. Existing joint prostheses do not remodel with host joint tissue. However, developing large-scale biomimetic anisotropic constructs mimicking native cartilage with structural integrity is challenging. In the present study, we describe anisotropic cartilage regeneration by three-dimensional (3D) bioprinting dual-factor releasing and gradient-structured constructs. Dual-factor releasing mesenchymal stem cell (MSC)–laden hydrogels were used for anisotropic chondrogenic differentiation. Together with physically gradient synthetic biodegradable polymers that impart mechanical strength, the 3D bioprinted anisotropic cartilage constructs demonstrated whole-layer integrity, lubrication of superficial layers, and nutrient supply in deep layers. Evaluation of the cartilage tissue in vitro and in vivo showed tissue maturation and organization that may be sufficient for translation to patients. In conclusion, one-step 3D bioprinted dual-factor releasing and gradient-structured constructs were generated for anisotropic cartilage regeneration, integrating the feasibility of MSC- and 3D bioprinting–based therapy for injured or degenerative joints.

Effects of in vitro low oxygen tension preconditioning of buccal fat pad stem cells on in Vivo articular cartilage tissue repair

Life Sciences ◽  
2021 ◽  
pp. 119728
Author(s):  
Fatemeh Dehghani Nazhvani ◽  
Leila Mohammadi Amirabad ◽  
Arezo Azari ◽  
Hamid Namazi ◽  
Simzar Hosseinzadeh ◽  
...  
Keyword(s):  
Stem Cells ◽  
Articular Cartilage ◽  
Tissue Repair ◽  
Cartilage Tissue ◽  
Low Oxygen ◽  
Fat Pad ◽  
Buccal Fat Pad ◽  
Low Oxygen Tension

scholarly journals miR-146a-5p Promotes Chondrocyte Apoptosis and Inhibits Autophagy of Osteoarthritis by Targeting NUMB

Cartilage ◽  
2021 ◽  
pp. 194760352110235
Author(s):  
Hongjun Zhang ◽  
Wendi Zheng ◽  
Du Li ◽  
Jia Zheng
Keyword(s):  
Caspase 3 ◽  
Cartilage Tissue ◽  
Luciferase Reporter ◽  
Chondrocyte Apoptosis ◽  
Knee Cartilage ◽  
Before And After ◽  
Related Proteins ◽  
Human And Mouse

Objective miR-146a-5p was found to be significantly upregulated in cartilage tissue of patients with osteoarthritis (OA). NUMB was shown to be involved in the autophagy regulation process of cells. We aimed to learn whether NUMB was involved in the apoptosis or autophagy process of chondrocytes in OA and related with miR-146a-5p. Methods QRT-PCR was used to detect miR-146a-5p level in 22 OA cartilage tissues and 22 controls. The targets of miR-146a-5p were analyzed using software and the luciferase reporter experiment. The apoptosis and autophagy, and related proteins were detected in chondrocytes treated with miR-146a-5p mimic/inhibitor or pcDNA3.1-NUMB/si-NUMB and IL-1β, respectively. In vivo experiment, intra-articular injection of miR-146a-5p antagomir/NC was administered at the knee of OA male mice before and after model construction. Chondrocyte apoptosis and the expression of apoptosis and autophagy-related proteins were also detected. Results miR-146a-5p was highly expressed in knee cartilage tissue of patients with OA, while NUMB was lowly expressed and negatively regulated by miR-146a-5p. Upregulation of miR-146a-5p can promote cell apoptosis and reduce autophagy of human and mouse chondrocytes by modulating the levels of cleaved caspase-3, cleaved PARP, Bax, Beclin 1, ATG5, p62, LC3-I, and LC3-II. Increasing the low level of NUMB reversed the effects of miR-146a-5p on chondrocyte apoptosis and autophagy. Intra-articular injection of miR-146a-5p antagomir can also reverse the effects of miR-146a-5p on the apoptosis and autophagy of knee joint chondrocytes in OA mice. Conclusion Downregulation of miR-146a-5p suppresses the apoptosis and promotes autophagy of chondrocytes by targeting NUMB in vivo and in vitro.

scholarly journals Current Knowledge on Functionality and Potential Therapeutic Uses of Donkey Milk

Animals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1382
Author(s):  
Mina Martini ◽  
Iolanda Altomonte ◽  
Domenico Tricò ◽  
Riccardo Lapenta ◽  
Federica Salari
Keyword(s):  
Animal Models ◽  
Randomized Clinical Trials ◽  
Current Knowledge ◽  
Saturated Fatty Acids ◽  
Cow Milk ◽  
Donkey Milk ◽  
Alpha Linolenic Acid ◽  
High Concentration

The increase of knowledge on the composition of donkey milk has revealed marked similarities to human milk, which led to a growing number of investigations focused on testing the potential effects of donkey milk in vitro and in vivo. This paper examines the scientific evidence regarding the beneficial effects of donkey milk on human health. Most clinical studies report a tolerability of donkey milk in 82.6–98.5% of infants with cow milk protein allergies. The average protein content of donkey milk is about 18 g/L. Caseins, which are main allergenic components of milk, are less represented compared to cow milk (56% of the total protein in donkey vs. 80% in cow milk). Donkey milk is well accepted by children due to its high concentration of lactose (about 60 g/L). Immunomodulatory properties have been reported in one study in humans and in several animal models. Donkey milk also seems to modulate the intestinal microbiota, enhance antioxidant defense mechanisms and detoxifying enzymes activities, reduce hyperglycemia and normalize dyslipidemia. Donkey milk has lower calorie and fat content compared with other milks used in human nutrition (fat ranges from 0.20% to 1.7%) and a more favourable fatty acid profile, being low in saturated fatty acids (3.02 g/L) and high in alpha-linolenic acid (about 7.25 g/100 g of fat). Until now, the beneficial properties of donkey milk have been mostly related to whey proteins, among which β-lactoglobulin is the most represented (6.06 g/L), followed by α-lactalbumin (about 2 g/L) and lysozyme (1.07 g/L). So far, the health functionality of donkey milk has been tested almost exclusively on animal models. Furthermore, in vitro studies have described inhibitory action against bacteria, viruses, and fungi. From the literature review emerges the need for new randomized clinical trials on humans to provide stronger evidence of the potential beneficial health effects of donkey milk, which could lead to new applications as an adjuvant in the treatment of cardiometabolic diseases, malnutrition, and aging.

scholarly journals Reversal of senescence-associated beta-galactosidase expression during in vitro three-dimensional tissue-engineering of human chondrocytes in a polymer scaffold

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Shojiro Katoh ◽  
Atsuki Fujimaru ◽  
Masaru Iwasaki ◽  
Hiroshi Yoshioka ◽  
Rajappa Senthilkumar ◽  
...  
Keyword(s):  
Regenerative Medicine ◽  
Replicative Senescence ◽  
Cultured Cells ◽  
Three Dimensional ◽  
Human Chondrocytes ◽  
Cartilage Tissue ◽  
Optimal Method ◽  
Beta Galactosidase

AbstractRegenerative medicine applications require cells that are not inflicted with senescence after in vitro culture for an optimal in vivo outcome. Methods to overcome replicative senescence include genomic modifications which have their own disadvantages. We have evaluated a three-dimensional (3D) thermo-reversible gelation polymer (TGP) matrix environment for its capabilities to reverse cellular senescence. The expression of senescence-associated beta-galactosidase (SA-βgal) by human chondrocytes from osteoarthritis-affected cartilage tissue, grown in a conventional two-dimensional (2D) monolayer culture versus in 3D-TGP were compared. In 2D, the cells de-differentiated into fibroblasts, expressed higher SA-βgal and started degenerating at 25 days. SA-βgal levels decreased when the chondrocytes were transferred from the 2D to the 3D-TGP culture, with cells exhibiting a tissue-like growth until 42–45 days. Other senescence associated markers such as p16INK4a and p21 were also expressed only in 2D cultured cells but not in 3D-TGP tissue engineered cartilage. This is a first-of-its-kind report of a chemically synthesized and reproducible in vitro environment yielding an advantageous reversal of aging of human chondrocytes without any genomic modifications. The method is worth consideration as an optimal method for growing cells for regenerative medicine applications.

The centriolar complex isolated from starfish spermatozoa

1981 ◽  
Vol 49 (1) ◽  
pp. 33-49 ◽  
Author(s):  
R. Kuriyama ◽  
H. Kanatani
Keyword(s):  
Gradient Centrifugation ◽  
Sucrose Density Gradient ◽  
Microtubule Assembly ◽  
High Concentration ◽  
Microtubule Organization ◽  
Sucrose Density Gradient Centrifugation ◽  
The Difference ◽  
Distal Centriole

Centrioles from spermatozoa of the starfish, Asterina pectinifera, were isolated and partially purified by solubilization of chromatin followed by sucrose density-gradient centrifugation. The ultrastructure of the isolated centriolar complex was investigated in whole mount preparations by electron microscopy. The complex unit was composed of a pair of centrioles and a pericentriolar structure, which associated with the distal end of the distal centriole by 9 spoke-like satellites extending radially to a marginal ring. Each satellite bifurcated at a dense node forming 2 fan-like shapes with a periodic striated pattern. The tubular structure of the centrioles easily disintegrated, leaving the pericentriolar structure or axonemal microtubules intact. The distal centriole in a spermatozoon served as an initiating site for flagellar microtubule assembly; that is, a number of “9 + 2′ axonemal tubules were observed adhering just beneath the distal end of the basal body. In experiments in vitro, polymerization of microtubule proteins purified from porcine brain was initiated by the structure at the ends of both proximal and distal centrioles, but not from the satellites or the marginal ring. Also, few if any microtubules were formed from the sides of each centriole, even in the presence of a high concentration of exogenous tubulin. On the other hand, centrioles of spermatozoa, when they were in mature ooplasm, could initiate the formation of sperm asters by microtubules. Therefore, centrioles in spermatozoa seem to be able to initiate microtubules in a 2 ways. A possible explanation of the difference between the 2 types of microtubule organization in vivo, i.e. in the sperm cell itself and in the ooplasm, it discussed.

Novel Self-Micro Emulsifying Drug Delivery System for safe intra muscular delivery with improved pharmacodynamics and pharmacokinetics

2021 ◽  
Vol 18 ◽  
Author(s):  
Subheet Kumar Jain ◽  
Neha Panchal ◽  
Amrinder Singh ◽  
Shubham Thakur ◽  
Navid Reza Shahtaghi ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Delivery System ◽  
Delivery System ◽  
Inflammatory Diseases ◽  
Diclofenac Sodium ◽  
Physical Stability ◽  
In Vivo Studies ◽  
High Concentration

Background: Diclofenac sodium (DS) injection is widely used in the management of acute or chronic pain and inflammatory diseases. It incorporates 20 % w/v Transcutol-P as a solubilizer to make the stable injectable formulation. However, the use of Transcutol-P in high concentration leads to adverse effects such as severe nephrotoxicity, etc. Some advancements resulted in the formulation of an aqueous based injectable but that too used benzyl alcohol reported to be toxic for human use. Objective: To develop an injectable self-micro emulsifying drug delivery system (SMEDDS) as a novel carrier of DS for prompt release with better safety and efficacy. Methods: A solubility study was performed with different surfactants and co-surfactants. The conventional stirring method was employed for the formulation of SMEDDS. Detailed in vitro characterization was done for different quality control parameters. In vivo studies were performed using Wistar rats for pharmacokinetic evaluation, toxicological analysis, and analgesic activity. Results: The optimized formulation exhibited good physical stability, ideal globule size (156±0.4 nm), quick release, better therapeutics, and safety, increase in LD50 (221.9 mg/kg) to that of the commercial counterpart (109.9 mg/kg). Further, pre-treatment with optimized formulation reduced the carrageenan-induced rat paw oedema by 88±1.2 % after 4 h, compared to 77±1.6 % inhibition with commercial DS formulation. Moreover, optimized formulation significantly (p<0.05) inhibited the pain sensation in the acetic-acid induced writhing test in mice compared to its commercial equivalent with a better pharmacokinetic profile. Conclusion: The above findings confirmed that liquid SMEDDS could be a successful carrier for the safe and effective delivery of DS

scholarly journals Cartilage Extracellular Matrix Scaffold With Kartogenin-Encapsulated PLGA Microspheres for Cartilage Regeneration

2020 ◽  
Vol 8 ◽  
Author(s):  
Yanhong Zhao ◽  
Xige Zhao ◽  
Rui Zhang ◽  
Ying Huang ◽  
Yunjie Li ◽  
...  
Keyword(s):  
Extracellular Matrix ◽  
Composite Scaffold ◽  
Rabbit Model ◽  
Cartilage Tissue ◽  
Cartilage Defects ◽  
Specific Marker ◽  
Molecular Compound ◽  
Plga Microspheres

Repair of articular cartilage defects is a challenging aspect of clinical treatment. Kartogenin (KGN), a small molecular compound, can induce the differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) into chondrocytes. Here, we constructed a scaffold based on chondrocyte extracellular matrix (CECM) and poly(lactic-co-glycolic acid) (PLGA) microspheres (MP), which can slowly release KGN, thus enhancing its efficiency. Cell adhesion, live/dead staining, and CCK-8 results indicated that the PLGA(KGN)/CECM scaffold exhibited good biocompatibility. Histological staining and quantitative analysis demonstrated the ability of the PLGA(KGN)/CECM composite scaffold to promote the differentiation of BMSCs. Macroscopic observations, histological tests, and specific marker analysis showed that the regenerated tissues possessed characteristics similar to those of normal hyaline cartilage in a rabbit model. Use of the PLGA(KGN)/CECM scaffold may mimic the regenerative microenvironment, thereby promoting chondrogenic differentiation of BMSCs in vitro and in vivo. Therefore, this innovative composite scaffold may represent a promising approach for acellular cartilage tissue engineering.

TRENDS AND CHALLENGES OF CARTILAGE TISSUE ENGINEERING

2009 ◽  
Vol 21 (03) ◽  
pp. 149-155 ◽  
Author(s):  
Hsu-Wei Fang
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Growth Factors ◽  
Bone Cells ◽  
Cartilage Tissue Engineering ◽  
Bioactive Molecules ◽  
In Vivo Studies ◽  
Cartilage Tissue

Cartilage injuries may be caused by trauma, biomechanical imbalance, or degenerative changes of joint. Unfortunately, cartilage has limited capability to spontaneous repair once damaged and may lead to progressive damage and degeneration. Cartilage tissue-engineering techniques have emerged as the potential clinical strategies. An ideal tissue-engineering approach to cartilage repair should offer good integration into both the host cartilage and the subchondral bone. Cells, scaffolds, and growth factors make up the tissue engineering triad. One of the major challenges for cartilage tissue engineering is cell source and cell numbers. Due to the limitations of proliferation for mature chondrocytes, current studies have alternated to use stem cells as a potential source. In the recent years, a lot of novel biomaterials has been continuously developed and investigated in various in vitro and in vivo studies for cartilage tissue engineering. Moreover, stimulatory factors such as bioactive molecules have been explored to induce or enhance cartilage formation. Growth factors and other additives could be added into culture media in vitro, transferred into cells, or incorporated into scaffolds for in vivo delivery to promote cellular differentiation and tissue regeneration.Based on the current development of cartilage tissue engineering, there exist challenges to overcome. How to manipulate the interactions between cells, scaffold, and signals to achieve the moderation of implanted composite differentiate into moderate stem cells to differentiate into hyaline cartilage to perform the optimum physiological and biomechanical functions without negative side effects remains the target to pursue.

Sign in / Sign up

Export Citation Format

Share Document