Nanostructured Particles of Wood: A Promising Substrate for the Production of Lignocellulolytic Enzymes by the Wood-Degrading Fungus Lentinus tigrinus

2020 ◽  
Vol 15 (1) ◽  
pp. 69-78
Author(s):  
V. V. Shutova ◽  
V. V. Revin
2020 ◽  
Vol 22 (11) ◽  
pp. 1079-1088
Author(s):  
Hamid R. Pourianfar ◽  
Safoora Mohammadnejad ◽  
Shadi Shahtahmasebi ◽  
Alireza Madjid Ansari ◽  
Saaid Zibaei ◽  
...  

2021 ◽  
Vol 9 (3) ◽  
pp. 533
Author(s):  
Alex Graça Contato ◽  
Tássio Brito de Oliveira ◽  
Guilherme Mauro Aranha ◽  
Emanuelle Neiverth de Freitas ◽  
Ana Claudia Vici ◽  
...  

The lignocellulosic biomass comprises three main components: cellulose, hemicellulose, and lignin. Degradation and conversion of these three components are attractive to biotechnology. This study aimed to prospect fungal lignocellulolytic enzymes with potential industrial applications, produced through a temporal analysis using Hymenaea courbaril and Tamarindus indica seeds as carbon sources. α-L-arabinofuranosidase, acetyl xylan esterase, endo-1,5-α-L-arabinanase, β-D-galactosidase, β-D-glucosidase, β-glucanase, β-D-xylosidase, cellobiohydrolase, endoglucanase, lichenase, mannanase, polygalacturonase, endo-1,4-β-xylanase, and xyloglucanase activities were determined. The enzymes were produced for eight filamentous fungi: Aspergillus fumigatus, Trametes hirsuta, Lasiodiplodia sp., two strains of Trichoderma longibrachiatum, Neocosmospora perseae, Fusarium sp. and Thermothelomyces thermophilus. The best producers concerning enzymatic activity were T. thermophilus and T. longibrachiatum. The optimal conditions for enzyme production were the media supplemented with tamarind seeds, under agitation, for 72 h. This analysis was essential to demonstrate that cultivation conditions, static and under agitation, exert strong influences on the production of several enzymes produced by different fungi. The kind of sugarcane, pretreatment used, microorganisms, and carbon sources proved limiting sugar profile factors.


Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 141
Author(s):  
Kirill V. Kuskov ◽  
Mohammad Abedi ◽  
Dmitry O. Moskovskikh ◽  
Illia Serhiienko ◽  
Alexander S. Mukasyan

Spark plasma sintering (SPS) is widely used for the consolidation of different materials. Copper-based pseudo alloys have found a variety of applications including as electrodes in vacuum interrupters of high-voltage electric circuits. How does the kinetics of SPS consolidation for such alloys depend on the heating rate? Do SPS kinetics depend on the microstructure of the media to be sintered? These questions were addressed by the investigation of SPS kinetics in the heating rate range of 0.1 to 50 K/s. The latter conditions were achieved through flash spark plasma sintering (FSPS). We also compared the sintering kinetics for the conventional copper–chromium mixture and for the mechanically induced copper/chromium nanostructured particles. It was shown that, under FSPS conditions, the observed maximum consolidation rates were 20–30 times higher than that for conventional SPS with a heating rate of 100 K/min. Under the investigated conditions, the sintering rate for mechanically induced composite Cu/Cr particles was 2–4 times higher compared to the conventional Cu + Cr mixtures. The apparent sintering activation energy for the Cu/Cr powder was twice less than that for Cu–Cr mixture. It was concluded that the FSPS of nanostructured powders is an efficient approach for the fabrication of pseudo-alloys.


2021 ◽  
Vol 125 (11) ◽  
pp. 6449-6460
Author(s):  
Subhash Sharma ◽  
C. F. Sánchez Valdés ◽  
J. L. Sánchez Llamazares ◽  
J. M. Siqueiros ◽  
Oscar Raymond Herrera

Molecules ◽  
2019 ◽  
Vol 24 (6) ◽  
pp. 1049 ◽  
Author(s):  
Rosalía Rodríguez-Dorado ◽  
Clara López-Iglesias ◽  
Carlos García-González ◽  
Giulia Auriemma ◽  
Rita Aquino ◽  
...  

Processing and shaping of dried gels are of interest in several fields like alginate aerogel beads used as highly porous and nanostructured particles in biomedical applications. The physicochemical properties of the alginate source, the solvent used in the gelation solution and the gel drying method are key parameters influencing the characteristics of the resulting dried gels. In this work, dried gel beads in the form of xerogels, cryogels or aerogels were prepared from alginates of different molecular weights (120 and 180 kDa) and concentrations (1.25, 1.50, 2.0 and 2.25% (w/v)) using different gelation conditions (aqueous and ethanolic CaCl2 solutions) and drying methods (supercritical drying, freeze-drying and oven drying) to obtain particles with a broad range of physicochemical and textural properties. The stability of physicochemical properties of alginate aerogels under storage conditions of 25 °C and 65% relative humidity (ICH-climatic zone II) during 1 and 3 months was studied. Results showed significant effects of the studied processing parameters on the resulting alginate dried gel properties. Stability studies showed small variations in aerogels weight and specific surface area after 3 months of storage, especially, in the case of aerogels produced with medium molecular weight alginate.


Author(s):  
Jurate Virkutyte ◽  
Souhail R. Al-Abed ◽  
Hyeok Choi ◽  
Christina Bennett-Stamper

2003 ◽  
Vol 18 (11) ◽  
pp. 2670-2676 ◽  
Author(s):  
Hendrik K. Kammler ◽  
Sotiris E. Pratsinis

Concurrent synthesis of titania-carbon nanoparticles (up to 52 wt.% in C) was studied in a diffusion flame aerosol reactor by combustion of titanium tetraisopropoxide and acetylene. These graphitically layered carbon-coated titania particles were characterized by high-resolution transmission electron microscopy (HRTEM), with elemental mapping of C and Ti, x-ray diffraction (XRD), and nitrogen adsorption [Brunauer-Emmett-Teller (BET)]. The specific surface area of the powder was controlled by the acetylene flow rate from 29 to 62 m2/g as the rutile content decreased from 68 to 17 wt.%. Light blue titania suboxides formed at low acetylene flow rates. The average XRD crystal size of TiO2 decreased steadily with increasing carbon content of the composite powders, while the average BET primary particle size calculated from nitrogen adsorption decreased first and then approached a constant value. The latter is attributed to the formation of individual carbon particles next to carbon-coated titania particles as observed by HRTEM and electron spectroscopic imaging.


Biomaterials ◽  
2010 ◽  
Vol 31 (7) ◽  
pp. 1699-1706 ◽  
Author(s):  
Xin Zhang ◽  
Mustapha Oulad-Abdelghani ◽  
Alexander N. Zelkin ◽  
Yajun Wang ◽  
Youssef Haîkel ◽  
...  

Author(s):  
Maria Augusta de Carvalho Silvello ◽  
Aline Frumi Camargo ◽  
Thamarys Scapini ◽  
Shukra Raj Paudel ◽  
Helen Treichel ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document