Effect of Highly Porous Bioceramics Based on ZrO2–Y2O3–CeO2 System on the Biological Tissues of Experimental Animals

2021 ◽  
Vol 12 (2) ◽  
pp. 370-376
Author(s):  
M. V. Kalinina ◽  
N. Yu. Kovalko ◽  
D. N. Suslov ◽  
Yu. S. Andozhskaia ◽  
O. V. Galibin ◽  
...  
Keyword(s):  
Biological Tissues ◽  
Experimental Animals ◽  
Porous Bioceramics ◽  
Highly Porous

Effect of highly porous bioceramics based on ZrO2 – Y2O3 – CeO2 system on the biological tissues of experimental animals

2020 ◽  
pp. 29-39
Author(s):  
M. V. Kalinina ◽  
◽  
N. Yu. Kovalko ◽  
D. N. Suslov ◽  
Yu. S. Andozhskaia ◽  
...  
Keyword(s):  
Soft Tissues ◽  
Pore Space ◽  
Biological Tissues ◽  
The Body ◽  
Laboratory Animals ◽  
Experimental Animals ◽  
Average Grain Size ◽  
Porous Bioceramics ◽  
Highly Porous

By reverse co-deposition of hydroxides synthesized highly dispersed powder (the average size 8 – 10 nm) of the composition (ZrO2)0.92(Y2О3)0.03(СеО2)0.05, based on it use comprehensive a blowing agent and mechanical activation of the obtained highly porous ceramics (average grain size 60 – 65 nm). The synthesized ceramic material-an implant with an open porosity of 55 % and a pore size of 40 – 800 nm was placed in the body of laboratory animals. The reaction of biological tissues of experimental animals to the introduction of plates made of composite highly porous materials based on t-ZrO2 15 months after their implantation was studied. It is revealed that enhanced revascularization is registered in capsules, and perfusion of tissues is registered in intact zone of ceramics introduction. The possibility of germination of vessels in soft tissues into the available pore space of ceramics is shown. The results obtained in vivo suggest that porous bioceramics based on t-ZrO2 can be used in the production of endoprostheses and implants in such areas of medicine as orthopedics and traumatology.

scholarly journals INFLUENCE OF HIGH-FREQUENCY ELECTRIC SCALPEL ON MORPHOLOGICAL INDICATORS OF EXPERIMENTAL ANIMALS BIOLOGICAL TISSUES

2021 ◽  
Vol 2 (1) ◽  
pp. 193
Author(s):  
S. M. Bilash ◽  
O. M. Pronina ◽  
A. V. Pyrog-Zakaznykova ◽  
R. O. Reva ◽  
O. S. Svyryda ◽  
...  
Keyword(s):  
High Frequency ◽  
Biological Tissues ◽  
Experimental Animals ◽  
Electric Scalpel

Highly porous bioceramics based on octacalcium phosphate

2017 ◽  
Vol 8 (5) ◽  
pp. 723-726 ◽  
Author(s):  
A. Yu. Fedotov ◽  
I. V. Smirnov ◽  
S. M. Barinov ◽  
V. S. Komlev
Keyword(s):  
Octacalcium Phosphate ◽  
Porous Bioceramics ◽  
Highly Porous

scholarly journals Highly Porous Polymer-Derived Bioceramics Based on a Complex Hardystonite Solid Solution

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 3970 ◽  
Author(s):  
Hamada Elsayed ◽  
Michele Secco ◽  
Federico Zorzi ◽  
Katharina Schuhladen ◽  
Rainer Detsch ◽  
...  
Keyword(s):  
Solid Solution ◽  
Glassy Phase ◽  
Porous Polymer ◽  
Phase Assemblage ◽  
Calcium Borate ◽  
Direct Ink Writing ◽  
Density Ratios ◽  
Porous Bioceramics ◽  
Highly Porous ◽  
Hydrated Calcium

Highly porous bioceramics, based on a complex hardystonite solid solution, were developed from silicone resins and micro-sized oxide fillers fired in air at 950 °C. Besides CaO, SrO, MgO, and ZnO precursors, and the commercial embedded silicone resins, calcium borate was essential in providing the liquid phase upon firing and favouring the formation of an unprecedented hardystonite solid solution, corresponding to the formula (Ca0.70Sr0.30)2(Zn0.72Mg0.15Si0.13) (Si0.85B0.15)2O7. Silicone-filler mixtures could be used in the form of thick pastes for direct ink writing of reticulated scaffolds or for direct foaming. The latter shaping option benefited from the use of hydrated calcium borate, which underwent dehydration, with water vapour release, at a low temperature (420 °C). Both scaffolds and foams confirmed the already-obtained phase assemblage, after firing, and exhibited remarkable strength-to-density ratios. Finally, preliminary cell tests excluded any cytotoxicity that could be derived from the formation of a boro-silicate glassy phase.

Three-Dimensional Visualization of the T-System of Frog Muscle Using High Voltage Electron Microscopy and a Lanthanum Stain

1977 ◽  
Vol 35 ◽  
pp. 570-571 ◽  
Author(s):  
Lee D. Peachey ◽  
Clara Franzini-Armstrong
Keyword(s):  
Electron Microscopy ◽  
High Voltage ◽  
Three Dimensional ◽  
Biological Tissues ◽  
High Voltage Electron Microscopy ◽  
Transverse Tubular System ◽  
Peroxidase Reaction ◽  
Voltage Electron ◽  
High Voltage Electron ◽  
T System

The effective study of biological tissues in thick slices of embedded material by high voltage electron microscopy (HVEM) requires highly selective staining of those structures to be visualized so that they are not hidden or obscured by other structures in the image. A tilt pair of micrographs with subsequent stereoscopic viewing can be an important aid in three-dimensional visualization of these images, once an appropriate stain has been found. The peroxidase reaction has been used for this purpose in visualizing the T-system (transverse tubular system) of frog skeletal muscle by HVEM (1). We have found infiltration with lanthanum hydroxide to be particularly useful for three-dimensional visualization of certain aspects of the structure of the T- system in skeletal muscles of the frog. Specifically, lanthanum more completely fills the lumen of the tubules and is denser than the peroxidase reaction product.

Analytical Electron Microscopy (AEM) of Meningeal Cells Exposed to Particulate Cobalt During Studies of Experimental Epilepsy

1982 ◽  
Vol 40 ◽  
pp. 186-187
Author(s):  
R.G. Frederickson ◽  
R.G. Ulrich ◽  
J.L. Culberson
Keyword(s):  
Electron Microscopy ◽  
Analytical Electron Microscopy ◽  
Experimental Epilepsy ◽  
Metallic Cobalt ◽  
Experimental Animals ◽  
X Ray ◽  
Brain Surface ◽  
Meningeal Cells ◽  
Analytical Electron ◽  
The Brain

Metallic cobalt acts as an epileptogenic agent when placed on the brain surface of some experimental animals. The mechanism by which this substance produces abnormal neuronal discharge is unknown. One potentially useful approach to this problem is to study the cellular and extracellular distribution of elemental cobalt in the meninges and adjacent cerebral cortex. Since it is possible to demonstrate the morphological localization and distribution of heavy metals, such as cobalt, by correlative x-ray analysis and electron microscopy (i.e., by AEM), we are using AEM to locate and identify elemental cobalt in phagocytic meningeal cells of young 80-day postnatal opossums following a subdural injection of cobalt particles.

On the High Voltage Electron Microscopy (1 MeV) of Biological Thick Sections

1972 ◽  
Vol 30 ◽  
pp. 464-465
Author(s):  
William H. Massover
Keyword(s):  
Electron Microscopy ◽  
High Voltage ◽  
Present Report ◽  
Biological Tissues ◽  
Specimen Preparation ◽  
Technical Problems ◽  
High Voltage Electron Microscopy ◽  
Thin Sections ◽  
Voltage Electron ◽  
High Voltage Electron

Stereoscopic examination of thick sections of fixed and embedded biological tissues by high voltage electron microscopy has been shown to allow direct visualization of three-dimensional fine structure. The present report will consider the occurrence of some new technical problems in specimen preparation and Image interpretation that are not common during lower voltage studies of thin sections.Thick Sectioning and Tissue Coloration - Epon sections of 0.5 μm or more that are cut with glass knives do not have a uniform thickness as Judged by their interference colors; these colors change with time during their flotation on the knife bath, and again when drying onto the specimen support. Quoted thicknesses thus must be considered only as rough estimates unless measured in specific regions by other methods. Chloroform vapors do not always result in good spreading of thick sections; however, they will spread spontaneously to large degrees after resting on the flotation bath for several minutes. Ribbons of thick sections have been almost impossible to obtain.

Rapid Critical Point Drying of Tissues in a Parr Bomb

1972 ◽  
Vol 30 ◽  
pp. 400-401
Author(s):  
C.A. Baechler ◽  
W. C. Pitchford ◽  
J. M. Riddle ◽  
C.B. Boyd ◽  
H. Kanagawa ◽  
...  
Keyword(s):  
Critical Point ◽  
Critical Pressure ◽  
Soft Tissues ◽  
Biological Tissues ◽  
Critical Temperatures ◽  
Air Drying ◽  
The Past ◽  
Critical Point Drying ◽  
Great Stress ◽  
Infiltration Techniques

Preservation of the topographic ultrastructure of soft biological tissues for examination by scanning electron microscopy has been accomplished in the past by using lengthy epoxy infiltration techniques, or dehydration in ethanol or acetone followed by air drying. Since the former technique requires several days of preparation and the latter technique subjects the tissues to great stress during the phase change encountered during air-drying, an alternate rapid, economical, and reliable method of surface structure preservation was developed. Turnbill and Philpott had used a fluorocarbon for the critical point drying of soft tissues and indicated the advantages of working with fluids having both moderately low critical pressures as well as low critical temperatures. Freon-116 (duPont) which has a critical temperature of 19. 7 C and a critical pressure of 432 psi was used in this study.

Ultrastructure and analytical microprobe analysis of simian lung mite pigments

1986 ◽  
Vol 44 ◽  
pp. 324-325
Author(s):  
R. W. Cole ◽  
J. C. Kim
Keyword(s):  
Biomedical Research ◽  
Tissue Damage ◽  
Microprobe Analysis ◽  
Old World Monkeys ◽  
Old World ◽  
Experimental Animals ◽  
The Past ◽  
Lung Mite ◽  
Mite Infestations ◽  
Cardiopulmonary System

In recent years, non-human primates have become indispensable as experimental animals in many fields of biomedical research. Pharmaceutical and related industries alone use about 2000,000 primates a year. Respiratory mite infestations in lungs of old world monkeys are of particular concern because the resulting tissue damage can directly effect experimental results, especially in those studies involving the cardiopulmonary system. There has been increasing documentation of primate parasitology in the past twenty years.

Applications of Time-OF-Flight Secondary Ion Mass Spectrometry (TOF-SIMS)

1990 ◽  
Vol 48 (2) ◽  
pp. 308-309
Author(s):  
Bruno Schueler ◽  
Robert W. Odom
Keyword(s):  
Mass Spectrometry ◽  
Secondary Ion Mass Spectrometry ◽  
Structural Information ◽  
Time Of Flight ◽  
Biological Tissues ◽  
Polymer Surfaces ◽  
Tof Sims ◽  
Secondary Ions ◽  
Ion Mass Spectrometry ◽  
Secondary Ion

Time-of-flight secondary ion mass spectrometry (TOF-SIMS) provides unique capabilities for elemental and molecular compositional analysis of a wide variety of surfaces. This relatively new technique is finding increasing applications in analyses concerned with determining the chemical composition of various polymer surfaces, identifying the composition of organic and inorganic residues on surfaces and the localization of molecular or structurally significant secondary ions signals from biological tissues. TOF-SIMS analyses are typically performed under low primary ion dose (static SIMS) conditions and hence the secondary ions formed often contain significant structural information.This paper will present an overview of current TOF-SIMS instrumentation with particular emphasis on the stigmatic imaging ion microscope developed in the authors’ laboratory. This discussion will be followed by a presentation of several useful applications of the technique for the characterization of polymer surfaces and biological tissues specimens. Particular attention in these applications will focus on how the analytical problem impacts the performance requirements of the mass spectrometer and vice-versa.

Sign in / Sign up

Export Citation Format

Share Document