Cytological studies of the M-haustorium of Endocronartium harknessii: morphology and ontogeny

1988 ◽  
Vol 66 (5) ◽  
pp. 974-988 ◽  
Author(s):  
A. A. Hopkin ◽  
J. Reid
Keyword(s):  
Pinus Banksiana ◽  
Phosphotungstic Acid ◽  
Chromic Acid ◽  
Periodic Acid ◽  
Neck Region ◽  
Wall Layer ◽  
Calcofluor White ◽  
Transmission Electron ◽  
Endocronartium Harknessii ◽  
The Matrix

M-haustoria of the endocyclic rust Endocronartium harknessii (J. P. Moore) Y. Hirat. were examined with light and transmission electron microscopy in infected seedlings of Pinus banksiana Lamb. The haustoria developed from unspecialized cells of the intercellular hyphae, each of which appeared capable of producing several haustoria. The haustoria were distinct from the intercellular hyphae in possessing a narrow septate neck region which terminated in a globose haustorial body. Periodic acid – thiocarbohydrazide – silver proteinate and periodic acid – chromic acid – phosphotungstic acid staining provided evidence of an additional wall layer in the haustorial neck not evident in the intercellular hyphae and suggested that the extra-haustorial matrix contained polysaccharides of mixed linkage as well as lipids. However, cellulase extraction and the use of gold-bound wheat-germ lectin showed that neither cellulose nor chitin, respectively, was a component of the matrix. Both the haustoria and the matrix were separated from the host cytoplasm by the extrahaustorial membrane. This membrane stained positively with periodic acid – chromic acid – phosphotungstic acid, while the noninvaginated portion of the host plasmalemma with which it was continuous usually did not. The matrix fluoresced strongly when stained with aniline blue in an apparently compatible reaction. Other stains such as analinonapthalenesulphonic acid and Calcofluor white showed evidence of protein and polysaccharide in the fungal walls. Light and transmission electron microscope observations showed that penetration pegs formed as narrow tubular evaginations of the haustorial mother cell which caused inward displacement of the host cell wall. They retained their peg-like appearance as they entered the cell lumen, but eventually their distal ends enlarged to form typical globose haustorial bodies.

Hyphal tip growth in Achlya. I. Cytoplasmic organization

1980 ◽  
Vol 26 (9) ◽  
pp. 1132-1140 ◽  
Author(s):  
T. W. Hill ◽  
J. T. Mullins
Keyword(s):  
Electron Microscopy ◽  
Fibrous Material ◽  
Tip Growth ◽  
Phosphotungstic Acid ◽  
Chromic Acid ◽  
Periodic Acid ◽  
Cytoplasmic Vesicles ◽  
Cytoplasmic Organization ◽  
Apical Vesicles ◽  
Hyphal Tip

Growing apices of Achlya ambisexttalis Raper hyphae were examined by electron microscopy using cytochemical techniques. Apical vesicles can be grouped into two major classes based upon size and cytochemical reactions. Vesicles of the most prominent class are about 150 nm in diameter and possess contents which appear fibrous in thin section. This fibrous material reacts positively with the periodic acid – silver methenamine (PASM) cytochemical test for polysaccharides. Most of these same vesicles also display IDPase activity, and a smaller number display acid phosphatase activity. Vesicles of the second class are about 80 nm in diameter, and include coated vesicles and others which react positively for IDPase activity. They show a negative PASM reaction in contrast with the larger vesicles. Some of these smaller vesicles are stained by the phosphotungstic acid – chromic acid (PTA–CrO3) stain, whereas 150-nm vesicles are not. The source of at least some vesicles of both major classes appears to be the Golgi apparatus. It is proposed that the IDPase activity and carbohydrate content of the 150-nm cytoplasmic vesicles could serve as useful markers in their isolation.

Host cell responses in susceptible hard pine tissue infected with Endocronartium harknessii

1988 ◽  
Vol 66 (12) ◽  
pp. 2511-2517 ◽  
Author(s):  
A. A. Hopkin ◽  
J. Reid
Keyword(s):  
Endoplasmic Reticulum ◽  
Cell Wall ◽  
Host Cell ◽  
Pinus Banksiana ◽  
Outer Cortex ◽  
Transmission Electron ◽  
Endocronartium Harknessii ◽  
Host Cell Wall ◽  
Infected Cells ◽  
Hypocotyl Tissue

Compatible interactions between susceptible hypocotyl tissue of Pinus banksiana Lamb, and Endocronartium harknessii (J. P. Moore) Y. Hirat. were studied using light and transmission electron microscopy. Host endoplasmic reticulum was observed to be closely associated with the haustorial body, although staining with silver proteinate failed to show any similarity between the contents of the endoplasmic reticulum and extrahaustorial matrix. The haustorium was also commonly observed to be closely associated with the host nucleus, often indenting the latter, though never in direct contact. Chloroplasts in recently infected cells appeared similar to those in uninfected cells, but in more advanced infections large starch grains were observed in the chloroplasts of the outer cortex; such chloroplasts normally contained little starch. Collars were another common feature of infected cells. Collars were continuous with the host cell wall and reacted to silver proteinate in a similar manner to the cell wall; callose was not evident. Collars were associated with portions of the cell wall that were inwardly displaced by the fungus; however, cytoplasmic vesicles were also observed in association with the collar and possibly contributed to their development.

Influence of Heat Treatments on Microstructures in an Fe-Co-V Alloy

1974 ◽  
Vol 32 ◽  
pp. 512-513
Author(s):  
S. Mahajan ◽  
M. R. Pinnel ◽  
J. E. Bennett
Keyword(s):  
Single Phase ◽  
Alloy Composition ◽  
Supersaturated Solid Solution ◽  
Cell Formation ◽  
Heat Treatments ◽  
Air Cooling ◽  
Iced Brine ◽  
Transmission Electron ◽  
The Matrix ◽  
Bcc Structure

The microstructural changes in an Fe-Co-V alloy (composition by wt.%: 2.97 V, 48.70 Co, 47.34 Fe and balance impurities, such as C, P and Ni) resulting from different heat treatments have been evaluated by optical metallography and transmission electron microscopy. Results indicate that, on air cooling or quenching into iced-brine from the high temperature single phase ϒ (fcc) field, vanadium can be retained in a supersaturated solid solution (α2) which has bcc structure. For the range of cooling rates employed, a portion of the material appears to undergo the γ-α2 transformation massively and the remainder martensitically. Figure 1 shows dislocation topology in a region that may have transformed martensitically. Dislocations are homogeneously distributed throughout the matrix, and there is no evidence for cell formation. The majority of the dislocations project along the projections of <111> vectors onto the (111) plane, implying that they are predominantly of screw character.

Demonstration of Retinal Glycogen with Silver Methenamine

1971 ◽  
Vol 29 ◽  
pp. 564-565
Author(s):  
A. W. Sedar ◽  
G. H. Bresnick
Keyword(s):  
Lactic Acid ◽  
Chromic Acid ◽  
Periodic Acid ◽  
Müller Cell ◽  
External Limiting Membrane ◽  
Electron Microscope Level ◽  
Reactive Process ◽  
Inner Limiting Membrane ◽  
Muller Cell ◽  
And Migration

After experimetnal damage to the retina with a variety of procedures Müller cell hypertrophy and migration occurs. According to Kuwabara and others the reactive process in these injuries is evidenced by a marked increase in amount of glycogen in the Müller cells. These cells were considered originally supporting elements with fiber processes extending throughout the retina from inner limiting membrane to external limiting membrane, but are known now to have high lactic acid dehydrogenase activity and the ability to synthesize glycogen. Since the periodic acid-chromic acid-silver methenamine technique was shown to demonstrate glycogen at the electron microscope level, it was selected to react with glycogen in the fine processes of the Müller cell that ramify among the neural elements in various layers of the retina and demarcate these cells cytologically. The Rhesus monkey was chosen as an example of a well vascularized retina and the rabbit as an example of a avascular retina to explore the possibilities of the technique.

Determination of the phase structure of polymerblends by electron microscopy

1978 ◽  
Vol 36 (1) ◽  
pp. 492-493
Author(s):  
Dr. G. Kaemof
Keyword(s):  
Screw Extruder ◽  
Electron Microscopic ◽  
Thin Sections ◽  
Single Screw Extruder ◽  
Transmission Electron ◽  
The Matrix ◽  
Twin Screw ◽  
Special Case ◽  
Microscopic Investigations

A mixture of polycarbonate (PC) and styrene-acrylonitrile-copolymer (SAN) represents a very good example for the efficiency of electron microscopic investigations concerning the determination of optimum production procedures for high grade product properties.The following parameters have been varied:components of charge (PC : SAN 50 : 50, 60 : 40, 70 : 30), kind of compounding machine (single screw extruder, twin screw extruder, discontinuous kneader), mass-temperature (lowest and highest possible temperature).The transmission electron microscopic investigations (TEM) were carried out on ultra thin sections, the PC-phase of which was selectively etched by triethylamine.The phase transition (matrix to disperse phase) does not occur - as might be expected - at a PC to SAN ratio of 50 : 50, but at a ratio of 65 : 35. Our results show that the matrix is preferably formed by the components with the lower melting viscosity (in this special case SAN), even at concentrations of less than 50 %.

The microstructure of a TiB2/Ti-47 Al composite material

1989 ◽  
Vol 47 ◽  
pp. 674-675
Author(s):  
O. Popoola ◽  
A.H. Heuer ◽  
P. Pirouz
Keyword(s):  
Composite Material ◽  
Ion Beam ◽  
Chemical Properties ◽  
Intermetallic Alloys ◽  
Transmission Electron ◽  
Diamond Polishing ◽  
Al Composite ◽  
The Matrix ◽  
Argon Ion ◽  
And Chemical Properties

The addition of fibres or particles (TiB2, SiC etc.) into TiAl intermetallic alloys could increase their toughness without compromising their good high temperature mechanical and chemical properties. This paper briefly discribes the microstructure developed by a TiAl/TiB2 composite material fabricated with the XD™ process and forged at 960°C.The specimens for transmission electron microscopy (TEM) were prepared in the usual way (i.e. diamond polishing and argon ion beam thinning) and examined on a JEOL 4000EX for microstucture and on a Philips 400T equipped with a SiLi detector for microanalyses.The matrix was predominantly γ (TiAl with L10 structure) and α2(TisAl with DO 19 structure) phases with various morphologies shown in figure 1.

A combined pseudoreplica-immunocytochemical technique for research and diagnostic virology

1990 ◽  
Vol 48 (3) ◽  
pp. 900-901
Author(s):  
Blayne Fritz ◽  
Stanley J. Naides ◽  
Kenneth Moore
Keyword(s):  
Phosphotungstic Acid ◽  
Immunogold Labelling ◽  
Uranyl Acetate ◽  
Distilled Water ◽  
Clinical Specimens ◽  
Tissue Sections ◽  
Specimen Retrieval ◽  
Transmission Electron ◽  
Viral Particles ◽  
Diagnostic Virology

The pseudoreplica method of staining viral particles for visualization by transmission electron microscopy is a very popular technique. The ability to concentrate clinical specimens while semi-embedding viral particles makes it especially well suited for morphologic and diagnostic virology. Immunolabelling viral particles with colloidal gold is a technique frequently employed by both research and diagnostic virologists. We have characterized a procedure which provides the advantage of both by modifying and combining pseudoreplica staining and immunogold labelling.Modification of specimen retrieval and delay of staining allows us to utilize pseudoreplica processed specimens within our standard immunogold labelling protocol. In brief, we absorbed samples onto 2% agarose, added.25% Formvar and wicked dry. We then floated the Formvar-virus film onto double distilled water, added grids and retrieved with parafilm. The Formvar-virus specimens were then treated as thin tissue sections within our standard two stage immunolabelling protocol. Following completion of immunogold labelling; each grid was negatively stained with phosphotungstic acid or uranyl acetate contrast stains.

scholarly journals Oxygen Induced Phase Transformation in TC21 Alloy with a Lamellar Microstructure

Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 163
Author(s):  
Shu Wang ◽  
Yilong Liang ◽  
Hao Sun ◽  
Xin Feng ◽  
Chaowen Huang
Keyword(s):  
Electron Microscopy ◽  
Phase Transformation ◽  
Oxygen Uptake ◽  
Titanium Alloys ◽  
Electron Backscatter Diffraction ◽  
Lamellar Microstructure ◽  
Α Phase ◽  
Transmission Electron ◽  
The Matrix ◽  
Oxygen Ingress

The main objective of the present study was to understand the oxygen ingress in titanium alloys at high temperatures. Investigations reveal that the oxygen diffusion layer (ODL) caused by oxygen ingress significantly affects the mechanical properties of titanium alloys. In the present study, the high-temperature oxygen ingress behavior of TC21 alloy with a lamellar microstructure was investigated. Microstructural characterizations were analyzed through optical microscopy (OM), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM). Obtained results demonstrate that oxygen-induced phase transformation not only enhances the precipitation of secondary α-phase (αs) and forms more primary α phase (αp), but also promotes the recrystallization of the ODL. It was found that as the temperature of oxygen uptake increases, the thickness of the ODL initially increases and then decreases. The maximum depth of the ODL was obtained for the oxygen uptake temperature of 960 °C. In addition, a gradient microstructure (αp + β + βtrans)/(αp + βtrans)/(αp + β) was observed in the experiment. Meanwhile, it was also found that the hardness and dislocation density in the ODL is higher than that that of the matrix.

Haustorial development of Peronospora tabacina infecting Nicotiana tabacum

1983 ◽  
Vol 61 (12) ◽  
pp. 3444-3453 ◽  
Author(s):  
R. N. Trigiano ◽  
C. G. Van Dyke ◽  
H. W. Spurr Jr.
Keyword(s):  
Cell Wall ◽  
Toluidine Blue ◽  
Mesophyll Cell ◽  
Wall Layer ◽  
Peronospora Tabacina ◽  
Host Cytoplasm ◽  
Transmission Electron ◽  
Mold Fungus ◽  
Host Cell Wall ◽  
Hyphal Wall

The development of haustoria in tobacco by the blue-mold fungus Peronospora tabacina was examined using light, scanning, and transmission electron microscopy. Electron-lucent, callose-like appositions were observed between the host plasmalemma and the host mesophyll cell wall prior to haustorial penetration. An electron-opaque penetration matrix was present between the apposition and the host cell wall. The intercellular hyphal wall consisted of two layers which differed in staining quality. The haustorial wall was also two layered, but was primarily composed of and continuous with the inner wall layer of the intercellular hypha. Haustoria were either finger-like or branched and were encased with callose-like material. Most encasements were thickened at the proximal regions of haustoria but were thinner along the distal portions. Vesicles were present in host cytoplasm and were occasionally attached to the invaginated host plasmalemma. These vesicles might contribute to the deposition of the encasement material. The encasement stained positively for callose using aniline blue; calcofluor and toluidine blue O tests for cellulose were inconclusive, and lignin was not detected using toluidine blue O or phloroglucinol–HCl.

Sign in / Sign up

Export Citation Format

Share Document