Effects of homo- and heterofermentative lactic acid bacteria on the quality and aerobic stability of corn silage

Author(s):  
Fanfan Zhang ◽  
Fang Miao ◽  
Xuzhe Wang ◽  
Weihua Lu ◽  
Chunhui Ma

This study aimed to investigate the effects of homo/heterofermentative lactic acid bacteria (LAB) on the quality of corn silage and its rumen digestibility. Maize (Zea mays strain Xingsiyu No. 10), at the early dough stage, was harvested, chopped, ensiled in vacuum bags and divided into four groups: 1) control (without added bacteria); 2) with the homofermentative LAB Lactobacillus plantarum and Pediococcus pentosaceus (1:1 mixture, 1 × 105 cfu g-1); 3) with the heterofermentative LAB Lactobacillus buchneri (1 × 105 cfu g-1); and 4) with the homo/heterofermentative LAB L. plantarum, P. pentosaceus, and L. buchneri (1:1:1 mixture). At 2, 8, 15, 45, and 60 d of ensiling, nutritional quality, fermentation characteristics, and microbial content were assessed. After 60 d, aerobic stability and rumen digestibility tests were performed. The addition of homo- and/or heterofermentative LAB significantly improved the nutritional quality, fermentation characteristics, and microbial content. Addition of the heterofermenter L. buchneri, with or without the homofermenters L. plantarum and P. pentosaceus, improved aerobic stability. The different LAB inoculants increased the degradation rates of dry matter, acid detergent fiber, and neutral detergent fiber of the corn silage by sheep ruminants. Analysis indicated that L. buchneri yielded the best corn silage.

2018 ◽  
Vol 53 (9) ◽  
pp. 1045-1052
Author(s):  
Mateus Merlo Coelho ◽  
Lúcio Carlos Gonçalves ◽  
José Avelino Santos Rodrigues ◽  
Kelly Moura Keller ◽  
Gustavo Vinícius de Souza dos Anjos ◽  
...  

Abstract: The objective of this work was to evaluate the effects of re-ensiling and bacterial inoculation on the quality of corn silage. The experiment was carried out in a 2x2 factorial design with or without inoculant (association of Lactobacillus plantarum and Propionibacterium acidipropionici), and with re-ensiling after 36 hours of aerobic exposure or only ensiling of the whole plant of 'BRS 1055' corn. The fermentative quality, nutritional parameters, dry matter losses, aerobic stability, and microbiological counts of silages were evaluated. Re-ensiling caused an increase of pH and in acetic acid and propionic acid concentrations, as well as in the dry matter (DM), crude protein, neutral detergent fiber, and neutral detergent fiber crude protein contents. Conversely, there was a reduction in the nonfiber carbohydrates concentration and in in vitro dry matter digestibility for the re-ensiled material. All changes were explained by the higher-effluent production and DM loss of re-ensiled material that was subjected to two compactions. Microbiology was not altered by the treatments. The use of inoculant altered ash content, but it did not influence other parameters. In contrast, re-ensiling after 36 hours of aerobic exposure caused a reduction in the nutritive value of corn silage and accentuated the DM losses.


Agriculture ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 335
Author(s):  
Ana Paula Maia dos Santos ◽  
Edson Mauro Santos ◽  
Gherman Garcia Leal de Araújo ◽  
Juliana Silva de Oliveira ◽  
Anderson de Moura Zanine ◽  
...  

The current study aimed to evaluate the application effects of the preactivated Lactobacillus buchneri and urea on the fermentative characteristics, chemical composition and aerobic stability in corn silages. The design was completely randomized, in a 6 × 5 factorial arrangement, with six types of additive and five opening times. The treatments consisted of corn silage; corn silage with freeze-dried inoculant; corn silage with freeze-dried inoculant +1.0% urea; corn silage with activated inoculant; corn silage with activated inoculant +1.0% urea, and corn silage with 1.0% urea. Populations of lactic acid bacteria stabilized at the 70th day, with average values of 8.91 and 9.15 log cfu/g for corn silage with freeze-dried inoculant +1.0% urea and corn silage with freeze-dried inoculant, respectively. In contrast, the silages without additives showed significantly lower values of 7.52 log cfu/g forage at the 70th day. The silages with urea (isolated or associated with the inoculant) increased the total nitrogen content. The maximum temperature values were highest in the corn silages without additives, indicating that these silages were more prone to deterioration. The use of Lactobacillus buchneri activated proved to be more efficient in improving the fermentative profile of corn silages than the freeze-dried inoculant. The use of urea as an additive reduced the losses and improved the nutritional value and aerobic stability of corn silages. Additionally, the combination of Lactobacillus buchneri activated and urea may be used as a technique to improve the fermentative profile, chemical composition and aerobic stability of corn silages.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Chao Peng ◽  
Wentao Sun ◽  
Xiang Dong ◽  
Lili Zhao ◽  
Jun Hao

AbstractThe study aimed to isolate and identify lactic acid bacteria (LAB) from silages and their application to improve the fermentation quality of alfalfa. Forty-nine LAB strains were isolated from silages, and two strains were screened for growth and acid production rates. Then two strains were selected for Physiological and morphological tests and 16S rRNA sequencing. They were Gram-positive and Catalase-negative and were able to grow at pH 3.5 and at 45 °C, were unable to grow different NaCl concentrations as 3.0% and 6.5%. Strain BDy3-10 was identified as Lactobacillus rhamnosus, while TSy1-3 was identified as L. buchneri. The selected strains were evaluated on fermentation of alfalfa silage. The highest crude protein content occurred in the BDy3-10 treatment group. The contents of neutral detergent fiber and acid detergent fiber in the TSy1-3 treatment were significantly lower than other treatment (P < 0.05). Compared to the control treatment, inoculation treatments deceased pH during ensiling (P < 0.001) and provided the most increased lactic acid content after ensiling for 10 days (P < 0.001). The acetic acid contents of all the inoculation groups were significantly increased (P < 0.001) during ensiling, and were lower than that of control group (P < 0.001). So, the TSy1-3 treatment most effectively improved the fermentation quality of alfalfa silage in warm and humid climate area.


2014 ◽  
Vol 95 (6) ◽  
pp. 1336-1342 ◽  
Author(s):  
Elena Bartkiene ◽  
Vita Krungleviciute ◽  
Grazina Juodeikiene ◽  
Daiva Vidmantiene ◽  
Zita Maknickiene

2021 ◽  
pp. 395-410
Author(s):  
Tânia Mara Becher Ribas ◽  
◽  
Mikael Neumann ◽  
Egon Henrique Horst ◽  
Fernando Braga Cristo ◽  
...  

The objective was to evaluate the efficiency of two bacterial inoculants, 11CFT and 11C33, with different genera of lactic acid bacteria on the chemical and fermentation composition of the silage, and the temperature and pH behavior of the silage during the feed out period. The experimental design used was randomized blocks, with three treatments: corn silage without inoculant (control); corn silage with 11CFT inoculant (consisting of strains of Lactobacillus buchneri and L. casei); and corn silage with 11C33 inoculant (consisting of strains of L. buchneri, L. plantarum and Enterococcus faecium). The use of both inoculants increased the concentration of lactic acid in the silage (22.42 g kg-1 for control against 36.00 and 33.33 g kg-1 for 11CFT and 11C33, respectively) and reduced aerobic dry matter losses. The silage treated with 11C33 obtained a higher concentration of acetic acid (17.44 g kg-1) and propionic acid (2.08 g kg-1). The 11CFT inoculant provided a lower concentration of ethanol, however, without differing from the silage with 11C33 (0.70 and 1.61 g kg-1, respectively). Even without variations in temperature and pH at silage unloading, the use of the 11C33 inoculant generated a higher concentration of acetic and propionic acid, providing better aerobic stability days after unloading. Both inoculants also improved the in situ ruminal digestibility of corn silage compared to control silage. They provide an increase in the content of lactic and propionic acids, which assist to reduce dry matter losses and ethanol production. There were no variations in temperature and pH at the silo unloading, however, the use of the 11C33 inoculant generated a higher concentration of acetic and propionic acids providing better aerobic stability after exposure to air.


2021 ◽  
Vol 9 (1) ◽  
pp. 52-59
Author(s):  
Xuxiong Tao ◽  
Chongwen Ji ◽  
Sifan Chen ◽  
Jie Zhao ◽  
Siran Wang ◽  
...  

This study was conducted to investigate the effects of adding citric acid residue (CAR) with or without lactic acid bacteria (LAB) to Napier grass (Cenchrus purpureus; syn. Pennisetum purpureum) cv. Sumu No. 2 at ensiling on the fermentation quality and aerobic stability of the resulting silage. Treatments included: Control (Napier grass forage without additives); and Napier grass inoculated with lactic acid bacteria (Lactobacillus plantarum and L. buchneri) at 1 × 106 cfu/gfresh weight (FW) forage (LAB) or 36 g citric acid residue/kg FW forage (CAR) or a mixture of CAR and LAB (CL). Forty-five days after ensiling the silages were tested for chemical and microbial composition and an aerobic stability test was conducted. The addition of CAR with or without LAB increased the DM and lactic acid concentrations in silage and decreased pH plus acetic acid, ammonia nitrogen (NH3-N), neutral detergent fiber and cellulose concentrations relative to Control. The pH in LAB silage was lower than in Control, while lactic acid concentration was higher. During the first 2 days of aerobic exposure, all additives increased the water-soluble carbohydrate (WSC) and lactic acid concentrations and decreased pH plus NH3-N and acetic acid concentrations. Moreover, CL silages had the highest WSC and the lowest NH3-N and acetic acid concentrations during aerobic exposure. However, all additives failed to improve the aerobic stability of the silage. While CAR with or without LAB inoculant improved the fermentation quality of silage made from Napier grass, more studies are warranted to identify additives which can improve aerobic stability of the silage after opening.


Author(s):  
Sara Simões ◽  
Rafaela Santos ◽  
Andreia Bento‐Silva ◽  
Marisa V. Santos ◽  
Mariana Mota ◽  
...  

2019 ◽  
Vol 32 (2) ◽  
pp. 506-513
Author(s):  
NERMY RIBEIRO VALADARES ◽  
VALTER CARVALHO DE ANDRADE JUNIOR ◽  
ROSANA CRISTINA PEREIRA ◽  
CÍNTIA MARIA TEIXEIRA FIALHO ◽  
MARCOS AURÉLIO MIRANDA FERREIRA

ABSTRACT Sweet potato branches have potential use in animal feeding, even fresh or ensiled, and some additives may enhance their quality. This study aimed at assessing silage quality of sweet potato branches using different additives. We ensiled sweet potato branches without additive (control) and with the addition of 10% disintegrated corn with straw and corncob (DCSC), 10% sugarcane bagasse from alembic, 10% citrus pulp, and 10% coffee husk. Three samples of each plot were obtained after drying for measurements of dry matter, crude protein, neutral detergent fiber (NDF), acid detergent fiber (ADF), cellulose, hemicellulose, lignin, mineral matter, starch, soluble sugars, pH, lactic acid bacteria population, gas, and effluent losses. Silage with DCSC, citrus pulp, and coffee rusk reached the highest dry matter contents. Moreover, citrus pulp silage had a high content of NDF. In contrast, DCSC silage showed the lowest content of ADF. Lignin was low in silage with DCSC, citrus pulp, and control (without additive). Suitable amounts of starch, crude protein, and lactic acid bacteria population were found in all treatments. Silage with DCSC achieved the best results for the assessed variables. Therefore, DCSC is the most suitable additive to improve silage quality of sweet potato branches.


Sign in / Sign up

Export Citation Format

Share Document