Thermal diagenesis in the Swiss molasse basin: implications for oil generation

1982 ◽  
Vol 19 (2) ◽  
pp. 328-342 ◽  
Author(s):  
F. Monnier

Clay mineral transformations during burial are indicators of the degree of diagenesis of sediments. Diagenetic zonations in numerous wells of the Swiss molasse basin are defined by the disappearance of smectite and (or) the appearance of either corrensite or irregular 2:1 mixed layers. The maximum level attained in the thickest molasse sections corresponds to organic matter maturation suitable for hydrocarbon generation. Reconstructed on the basis of the clay mineral transformation data, a burial history of the basin is proposed.

Author(s):  
A., C. Prasetyo

Overpressure existence represents a geological hazard; therefore, an accurate pore pressure prediction is critical for well planning and drilling procedures, etc. Overpressure is a geological phenomenon usually generated by two mechanisms, loading (disequilibrium compaction) and unloading mechanisms (diagenesis and hydrocarbon generation) and they are all geological processes. This research was conducted based on analytical and descriptive methods integrated with well data including wireline log, laboratory test and well test data. This research was conducted based on quantitative estimate of pore pressures using the Eaton Method. The stages are determining shale intervals with GR logs, calculating vertical stress/overburden stress values, determining normal compaction trends, making cross plots of sonic logs against density logs, calculating geothermal gradients, analyzing hydrocarbon maturity, and calculating sedimentation rates with burial history. The research conducted an analysis method on the distribution of clay mineral composition to determine depositional environment and its relationship to overpressure. The wells include GAP-01, GAP-02, GAP-03, and GAP-04 which has an overpressure zone range at depth 8501-10988 ft. The pressure value within the 4 wells has a range between 4358-7451 Psi. Overpressure mechanism in the GAP field is caused by non-loading mechanism (clay mineral diagenesis and hydrocarbon maturation). Overpressure distribution is controlled by its stratigraphy. Therefore, it is possible overpressure is spread quite broadly, especially in the low morphology of the “GAP” Field. This relates to the delta depositional environment with thick shale. Based on clay minerals distribution, the northern part (GAP 02 & 03) has more clay mineral content compared to the south and this can be interpreted increasingly towards sea (low energy regime) and facies turned into pro-delta. Overpressure might be found shallower in the north than the south due to higher clay mineral content present to the north.


2018 ◽  
Vol 36 (5) ◽  
pp. 1229-1244
Author(s):  
Xiao-Rong Qu ◽  
Yan-Ming Zhu ◽  
Wu Li ◽  
Xin Tang ◽  
Han Zhang

The Huanghua Depression is located in the north-centre of Bohai Bay Basin, which is a rift basin developed in the Mesozoic over the basement of the Huabei Platform, China. Permo-Carboniferous source rocks were formed in the Huanghua Depression, which has experienced multiple complicated tectonic alterations with inhomogeneous uplift, deformation, buried depth and magma effect. As a result, the hydrocarbon generation evolution of Permo-Carboniferous source rocks was characterized by discontinuity and grading. On the basis of a detailed study on tectonic-burial history, the paper worked on the burial history, heating history and hydrocarbon generation history of Permo-Carboniferous source rocks in the Huanghua Depression combined with apatite fission track testing and fluid inclusion analyses using the EASY% Ro numerical simulation. The results revealed that their maturity evolved in stages with multiple hydrocarbon generations. In this paper, we clarified the tectonic episode, the strength of hydrocarbon generation and the time–spatial distribution of hydrocarbon regeneration. Finally, an important conclusion was made that the hydrocarbon regeneration of Permo-Carboniferous source rocks occurred in the Late Cenozoic and the subordinate depressions were brought forward as advantage zones for the depth exploration of Permo-Carboniferous oil and gas in the middle-northern part of the Huanghua Depression, Bohai Bay Basin, China.


1990 ◽  
Vol 27 (6) ◽  
pp. 731-741 ◽  
Author(s):  
Rudolf Bertrand

Carbonate platform sequences of Anticosti Island and the Mingan Archipelago are Early Ordovician to Early Silurian in age. With the exception of the Macasty Formation, the sequences are impoverished in dispersed organic matter, which is chiefly composed of zooclasts. Zooclast reflectances suggest that the Upper Ordovician and Silurian sequences outcropping on Anticosti Island are entirely in the oil window but that the Lower to Middle Ordovician beds of the Mingan Archipelago and their stratigraphic equivalents in the subsurface of most of Anticosti Island belong to the condensate zone. Only the deeper sequences of the southwestern sector of Anticosti Island are in the diagenetic dry-gas zone. The maximum depth of burial of sequences below now-eroded Silurian to Devonian strata increases from 2.3 km on southwestern Anticosti Island to 4.5 km in the Mingan Archipelago. A late upwarp of the Precambrian basement likely allowed deeper erosion of the Paleozoic strata in the vicinity of the Mingan Archipelago than on Anticosti Island. Differential erosion resulted in a southwestern tilting of equal maturation surfaces. The Macasty Formation, the only source rock of the basin (total organic carbon generally > 3.5%, shows a wide range of thermal maturation levels (potential oil window to diagenetic dry gas). It can be inferred from the burial history of Anticosti Island sequences that oil generation began later but continued for a longer period of geologic time in the northeastern part than in the southeastern part of the island. Oil generation was entirely pre-Acadian in the southern and western parts of Anticosti Island, but pre- and post-Acadian in the northern and eastern parts.


2018 ◽  
Vol 6 (1) ◽  
pp. SB111-SB122 ◽  
Author(s):  
Ferenc Horváth ◽  
Ivan Dulić ◽  
Alan Vranković ◽  
Balázs Koroknai ◽  
Tamás Tóth ◽  
...  

The Pannonian Basin is an intraorogenic extensional region floored by a complex system of Alpine orogenic terranes and oceanic suture zones. Its formation dates back to the beginning of the Miocene, and initial fluvial-lacustrine deposits pass into shallow to open marine strata, including a large amount of calc-alkaline volcanic materials erupted during the culmination of the synrift phase. The onset of the postrift phase occurred during the Late Miocene, when the basin became isolated and a large Pannonian lake developed. Early lacustrine marls are overlain by turbiditic sandstones and silts related to a progradational shelf slope and a delta plain sequence passing upward into alluvial plain deposits and eolian sands. A remarkable nonconformity at the top of lacustrine strata associated with a significant (4–7 my) time gap at large parts of the basin documents a neotectonic phase of activity, manifested by regional strike-slip faulting and kilometer-scale differential vertical movements, with erosion and redeposition. Subsidence and burial history modeling indicate that Middle and Late Miocene, fairly organic-rich marine and lacustrine (respectively) shales entered into the oil-generation window at about the beginning of the Pliocene in depocenters deeper than 2.5–3 km, and even reached the wet to dry gas-generation zone at depths exceeding 4–4.5 km. Migration out of these kitchens has been going on since the latest Miocene toward basement highs, where anticlines and flower structures offered adequate trapping conditions for hydrocarbons. We argue that compaction of thick sedimentary piles, in addition to neotectonic structures, has also been important in trap formation within the Pannonian Basin.


Clay Minerals ◽  
2005 ◽  
Vol 40 (1) ◽  
pp. 43-61 ◽  
Author(s):  
S. J. Kemp ◽  
R. J. Merriman ◽  
J. E. Bouch

AbstractThe clay mineral assemblages and microtextures of a suite of mudrocks from the Lias Group of England and Wales indicate important regional differences in burial history.Samples from the northern Cleveland Basin are characterized by illite-smectite (I-S, 90% illite) and little carbonate whilst samples from the southern Worcester and Wessex basins contain less mature discrete smectite and are often calcite- and dolomite-rich. Lias Group rocks have been buried to 4 km in the Cleveland Basin but to <2 km in the Worcester and Wessex basins. Burial in the Cleveland Basin is deeper than previously estimated and does not need a local heating event. Illite- smectite (80% illite) detected in samples from the East Midlands Shelf suggests burial to 3 km, again deeper than previous estimates for this region.


1996 ◽  
Vol 43 ◽  
pp. 133-142
Author(s):  
H. I. Petersen ◽  
J. A. Bojesen Koefoed ◽  
H. P. Nytoft

A c. 1 m thick carbonaceous claystone from the type locality of the Lower Cretaceous Skyttegård Member (Rabekke Formation), Bornholm, has been investigated by organic pétrographie and organic geochemical methods in order to assess the depositional environment of the claystone and the thermal maturity of the organic matter. The claystone was deposited in a low-energy, anoxic lake which occasionally was marine influenced. The organic matter is terrestrial and can be classified as kerogen type III and lib. Detrital organic matter and cutinite are characteristic components. The organic matter is allochthonous but the transport distance was short, and the plant material was probably mainly derived from plants growing at the edge of, or nearto, the lake. Source-specific biomarkers such as norisopimarane suggest that the plant litter was derived from a gymnospermous, low-diversity vegetation. Evidence for early angiospermous plants cannot be demonstrated with any certainty. A huminite reflectance value of 0.24%Rm and several geochemical parameters indicate that the organic matter is highly immature. It has only experienced coalification corresponding to the peat stage. Estimates show that, prior to uplift, the claystone was buried to a maximum of approximately 260 m. Reflectance data further suggest that a maximum c. 550 m thick sediment package was removed by erosion prior to deposition of the ?uppermost Jurassic-Lower Cretaceous sediments on Lower Jurassic strata.


2019 ◽  
Vol 11 (1) ◽  
pp. 77-88 ◽  
Author(s):  
Wrya J. Mamaseni ◽  
Srood F Naqshabandi ◽  
Falah Kh. Al-Jaboury

Abstract In this study collected samples of Chia Gara Formation in Atrush, Shaikhan and Sarsang oilfields are used to geochemical characteristics of organic matter in this formation. This determination was based on Rock-Eval pyrolysis and Biomarker analyses. The Chia Gara Formation can be considered as good to excellent source rock; it’s TOC content ranges from 1.14-8.5wt% with an average of 1.85%, 3.91%, and 6.94% in Atush-1, Mangesh-1 and Shaikhan-8 wells respectively. The samples of Chia Gara Formation contain kerogen type II. These properties are considered optimal for oil generation. The low oxygen index (OI) and pristane/phytane (Pr/Ph) ratios (Average 20.73, 0.61 respectively) and high hydrogen index (HI) (average 637.6) indicate that the formation was deposited under anoxic condition. According to regular sterane (C27%, C28%, C29%) and terpanes ratios (C29/C30, C31/C30 hopane), the formation was deposited in marine environment. The average value of the Carbon Preference Index (CPI) is one with Tmax values of more than 430 ºC; these indicate peak oil window for the selected samples. Overall, the 20S/(20S+20R), ββ/(ββ+αα)C29 steranes and 22R/(22R+22S)C32homohopane, with Ts/ (Ts+Tm), and moretane/ hopane ratios point to a mature organic matter and to the ability of the formation to generate oil.


2012 ◽  
Vol 63 (4) ◽  
pp. 335-342 ◽  
Author(s):  
Paweł Kosakowski ◽  
Magdalena Wróbel

Burial history, thermal history and hydrocarbon generation modelling of the Jurassic source rocks in the basement of the Polish Carpathian Foredeep and Outer Carpathians (SE Poland)Burial history, thermal maturity, and timing of hydrocarbon generation were modelled for the Jurassic source rocks in the basement of the Carpathian Foredeep and marginal part of the Outer Carpathians. The area of investigation was bounded to the west by Kraków, to the east by Rzeszów. The modelling was carried out in profiles of wells: Będzienica 2, Dębica 10K, Góra Ropczycka 1K, Goleszów 5, Nawsie 1, Pławowice E1 and Pilzno 40. The organic matter, containing gas-prone Type III kerogen with an admixture of Type II kerogen, is immature or at most, early mature to 0.7 % in the vitrinite reflectance scale. The highest thermal maturity is recorded in the south-eastern part of the study area, where the Jurassic strata are buried deeper. The thermal modelling showed that the obtained organic matter maturity in the initial phase of the "oil window" is connected with the stage of the Carpathian overthrusting. The numerical modelling indicated that the onset of hydrocarbon generation from the Middle Jurassic source rocks was also connected with the Carpathian thrust belt. The peak of hydrocarbon generation took place in the orogenic stage of the overthrusting. The amount of generated hydrocarbons is generally small, which is a consequence of the low maturity and low transformation degree of kerogen. The generated hydrocarbons were not expelled from their source rock. An analysis of maturity distribution and transformation degree of the Jurassic organic matter shows that the best conditions for hydrocarbon generation occurred most probably in areas deeply buried under the Outer Carpathians. It is most probable that the "generation kitchen" should be searched for there.


Sign in / Sign up

Export Citation Format

Share Document