scholarly journals Inverse problems and invisibility cloaking for FEM models and resistor networks

2014 ◽  
Vol 25 (02) ◽  
pp. 309-342 ◽  
Author(s):  
Matti Lassas ◽  
Mikko Salo ◽  
Leo Tzou
Keyword(s):  
Differential Equation ◽  
Inverse Problems ◽  
Discrete Problem ◽  
The Finite Element Method ◽  
Conductivity Equation ◽  
Inverse Conductivity Problem ◽  
Resistor Networks ◽  
Boundary Measurements ◽  
Arbitrary Body ◽  
The One

In this paper we consider inverse problems for resistor networks and for models obtained via the finite element method (FEM) for the conductivity equation. These correspond to discrete versions of the inverse conductivity problem of Calderón. We characterize FEM models corresponding to a given triangulation of the domain that are equivalent to certain resistor networks, and apply the results to study nonuniqueness of the discrete inverse problem. It turns out that the degree of nonuniqueness for the discrete problem is larger than the one for the partial differential equation. We also study invisibility cloaking for FEM models, and show how an arbitrary body can be surrounded with a layer so that the cloaked body has the same boundary measurements as a given background medium.

scholarly journals Study on the Leakage and Inter-Stage Pressure Drop Characteristics of Two-Stage Finger Seal

2021 ◽  
Vol 11 (5) ◽  
pp. 2239
Author(s):  
Hailin Zhao ◽  
Hua Su ◽  
Guoding Chen ◽  
Yanchao Zhang
Keyword(s):  
Pressure Drop ◽  
Pressure Difference ◽  
Radial Displacement ◽  
Mean Square ◽  
The Finite Element Method ◽  
Axial Pressure ◽  
Two Stage ◽  
One Stage ◽  
The One ◽  
Lower Contact

To solve the high leakage and high wear problems faced by sealing devices in aeroengines under the condition of high axial pressure difference, the two-stage finger seal is proposed in this paper. The finite element method and computational fluid dynamics (FEM/CFD) coupling iterative algorithm of the two-stage finger seal is developed and validated. Then the performance advantages of two-stage finger seal compared to the one-stage finger seal are studied, as well as the leakage and the inter-stage pressure drop characteristics of two-stage finger seal are investigated. Finally, the measure to improve the inter-stage imbalance of pressure drop of two-stage finger seal is proposed. The results show that the two-stage finger seal has lower leakage and lower contact pressure than the one-stage finger seal at high axial pressure difference, but there exists an inter-stage imbalance of pressure drop. Increasing the axial pressure difference and the root mean square (RMS) roughness of finger element can aggravate the imbalance of pressure drop, while the radial displacement excitation of rotor has little influence on it. The results also indicate that the inter-stage imbalance of pressure drop of the two-stage finger seal can be improved by increasing the number of finger elements of the 1st finger seal and decreasing the number of finger elements of the 2nd finger seal.

scholarly journals Stability of a one-dimensional morphoelastic model for post-burn contraction

2021 ◽  
Vol 83 (3) ◽  
Author(s):  
Ginger Egberts ◽  
Fred Vermolen ◽  
Paul van Zuijlen
Keyword(s):  
Wound Healing ◽  
Residual Stresses ◽  
Truncation Error ◽  
Signaling Molecules ◽  
Discrete Problem ◽  
One Dimensional ◽  
Stability Constraint ◽  
Biological Interpretation ◽  
The Stability ◽  
The One

AbstractTo deal with permanent deformations and residual stresses, we consider a morphoelastic model for the scar formation as the result of wound healing after a skin trauma. Next to the mechanical components such as strain and displacements, the model accounts for biological constituents such as the concentration of signaling molecules, the cellular densities of fibroblasts and myofibroblasts, and the density of collagen. Here we present stability constraints for the one-dimensional counterpart of this morphoelastic model, for both the continuous and (semi-) discrete problem. We show that the truncation error between these eigenvalues associated with the continuous and semi-discrete problem is of order $${{\mathcal {O}}}(h^2)$$ O ( h 2 ) . Next we perform numerical validation to these constraints and provide a biological interpretation of the (in)stability. For the mechanical part of the model, the results show the components reach equilibria in a (non) monotonic way, depending on the value of the viscosity. The results show that the parameters of the chemical part of the model need to meet the stability constraint, depending on the decay rate of the signaling molecules, to avoid unrealistic results.

scholarly journals DIFFERENTIAL EQUATION APPROACH FOR ONE- AND TWO-DIMENSIONAL LATTICE GREEN'S FUNCTION

2007 ◽  
Vol 21 (02n03) ◽  
pp. 139-154 ◽  
Author(s):  
J. H. ASAD
Keyword(s):  
Differential Equation ◽  
Green’S Function ◽  
Recurrence Relation ◽  
Green's Function ◽  
Two Dimensional ◽  
Dimensional Lattice ◽  
One Dimensional ◽  
The One ◽  
Lattice Green's Function ◽  
Lattice Green’S Function

A first-order differential equation of Green's function, at the origin G(0), for the one-dimensional lattice is derived by simple recurrence relation. Green's function at site (m) is then calculated in terms of G(0). A simple recurrence relation connecting the lattice Green's function at the site (m, n) and the first derivative of the lattice Green's function at the site (m ± 1, n) is presented for the two-dimensional lattice, a differential equation of second order in G(0, 0) is obtained. By making use of the latter recurrence relation, lattice Green's function at an arbitrary site is obtained in closed form. Finally, the phase shift and scattering cross-section are evaluated analytically and numerically for one- and two-impurities.

Indentation of a Transversely Isotropic Thermoporoelastic Half-Space by a Rigid Circular Cylindrical Punch

2017 ◽  
Vol 84 (11) ◽  
Author(s):  
Yilan Huang ◽  
Guozhan Xia ◽  
Weiqiu Chen ◽  
Xiangyu Li
Keyword(s):  
Half Space ◽  
Original Problem ◽  
Three Dimensional ◽  
Transversely Isotropic ◽  
The Finite Element Method ◽  
Thermal Fields ◽  
Cylindrical Punch ◽  
The One ◽  
Physical Quantities ◽  
Potential Theory Method

Exact solutions to the three-dimensional (3D) contact problem of a rigid flat-ended circular cylindrical indenter punching onto a transversely isotropic thermoporoelastic half-space are presented. The couplings among the elastic, hydrostatic, and thermal fields are considered, and two different sets of boundary conditions are formulated for two different cases. We use a concise general solution to represent all the field variables in terms of potential functions and transform the original problem to the one that is mathematically expressed by integral (or integro-differential) equations. The potential theory method is extended and applied to exactly solve these integral equations. As a consequence, all the physical quantities of the coupling fields are derived analytically. To validate the analytical solutions, we also simulate the contact behavior by using the finite element method (FEM). An excellent agreement between the analytical predictions and the numerical simulations is obtained. Further attention is also paid to the discussion on the obtained results. The present solutions can be used as a theoretical reference when practically applying microscale image formation techniques such as thermal scanning probe microscopy (SPM) and electrochemical strain microscopy (ESM).

The Effect of Curvature and Torsion on the Temperature Distribution in a Helix

1985 ◽  
Vol 52 (3) ◽  
pp. 529-532 ◽  
Author(s):  
D. D. Sayers ◽  
M. C. Potter
Keyword(s):  
Differential Equation ◽  
Finite Element Method ◽  
Partial Differential Equation ◽  
Temperature Distribution ◽  
Strong Dependence ◽  
Maximum Temperature ◽  
Nonuniform Heating ◽  
The Finite Element Method ◽  
Curvature Parameter ◽  
Curvature And Torsion

Traditional analysis treats the helix as a straight wire with the effects of nonuniform heating, torsion, and large curvature ignored. Using a helical coordinate system the governing partial differential equation including these effects is derived. The equation is then solved numerically using the finite element method. The results indicate a strong dependence of the temperature on the torsion parameter when the curvature parameter is significant. As the curvature parameter increases, the temperature distribution becomes skew-symmetric and the maximum temperature in the helix increases. Nonuniform heating influences the temperature distribution independent of the curvature and torsion.

scholarly journals Simplified Grinding Temperature Model Study

2019 ◽  
Vol 6 (2) ◽  
pp. a1-a7
Author(s):  
N. V. Lishchenko ◽  
V. P. Larshin ◽  
H. Krachunov
Keyword(s):  
Differential Equation ◽  
Heat Conduction ◽  
Heat Source ◽  
Boundary Conditions ◽  
Grinding Temperature ◽  
Temperature Model ◽  
One Dimensional ◽  
Heating And Cooling ◽  
Equation Of Heat Conduction ◽  
The One

A study of a simplified mathematical model for determining the grinding temperature is performed. According to the obtained results, the equations of this model differ slightly from the corresponding more exact solution of the one-dimensional differential equation of heat conduction under the boundary conditions of the second kind. The model under study is represented by a system of two equations that describe the grinding temperature at the heating and cooling stages without the use of forced cooling. The scope of the studied model corresponds to the modern technological operations of grinding on CNC machines for conditions where the numerical value of the Peclet number is more than 4. This, in turn, corresponds to the Jaeger criterion for the so-called fast-moving heat source, for which the operation parameter of the workpiece velocity may be equivalently (in temperature) replaced by the action time of the heat source. This makes it possible to use a simpler solution of the one-dimensional differential equation of heat conduction at the boundary conditions of the second kind (one-dimensional analytical model) instead of a similar solution of the two-dimensional one with a slight deviation of the grinding temperature calculation result. It is established that the proposed simplified mathematical expression for determining the grinding temperature differs from the more accurate one-dimensional analytical solution by no more than 11 % and 15 % at the stages of heating and cooling, respectively. Comparison of the data on the grinding temperature change according to the conventional and developed equations has shown that these equations are close and have two points of coincidence: on the surface and at the depth of approximately threefold decrease in temperature. It is also established that the nature of the ratio between the scales of change of the Peclet number 0.09 and 9 and the grinding temperature depth 1 and 10 is of 100 to 10. Additionally, another unusual mechanism is revealed for both compared equations: a higher temperature at the surface is accompanied by a lower temperature at the depth. Keywords: grinding temperature, heating stage, cooling stage, dimensionless temperature, temperature model.

scholarly journals Finite element methods for compressible Stokes equations with inflow boundary condition

1997 ◽  
Vol 56 (2) ◽  
pp. 217-225
Author(s):  
Jae Ryong Kweon
Keyword(s):  
Finite Element Method ◽  
Boundary Condition ◽  
Finite Element ◽  
Error Analysis ◽  
Finite Element Methods ◽  
Stokes Equations ◽  
Discrete Problem ◽  
Unique Existence ◽  
Inflow Boundary Condition ◽  
The One

A finite element method for solving the compressible viscous Stokes equation with an inflow boundary condition is presented. The unique existence of the solution of the discrete problem is established, and an error analysis is given. It is shown that the error in pressure is dominated by the one in velocity and an error at the inflow portion of the boundary.

Sign in / Sign up

Export Citation Format

Share Document