Experimental and Numerical Investigation of the Polyurea-Coated Ultra-High-Performance Concrete (UHPC) Column under Lateral Impact Loading

2021 ◽  
Author(s):  
Bin Gao ◽  
Jun Wu ◽  
Pengcheng Jia ◽  
Shutao Li ◽  
Qiushi Yan ◽  
...  
Keyword(s):  
Axial Force ◽  
Impact Loading ◽  
High Performance ◽  
Shear Failure ◽  
High Performance Concrete ◽  
Impact Resistance ◽  
Fe Model ◽  
Strengthening Effect ◽  
Lateral Impact ◽  
Ultra High Performance Concrete

It was found that polyurea coating could improve the integrity and the corresponding durability of the structural components. However, the strengthening effect of polyurea coatings for structures built with emerging ultra-high-performance concrete (UHPC) is still unknown due to the lack of studies. Therefore, this paper investigated the effect of the polyurea coating on the lateral impact resistance of UHPC columns through a combined numerical and experimental study. A total of five specimens were fabricated, including two UHPC columns and three UHPC columns with polyurea coating. To better characterize the structural response under dynamic loading, impact cases with different drop weight impact heights and axial force ratios were employed. The results showed that the UHPC column with polyurea coating exhibited superior lateral impact resistance compared to the UHPC column. The presence of the axial force increased the lateral impact stiffness and further reduced the deflection of the specimen. In contrast, the polyurea coating improved the specimen’s ductility and mitigated the peak impact force, thereby maintaining the specimen’s integrity without sudden shear failure. A three-dimensional finite element (FE) model of polyurea-coated UHPC columns under impact loading was then established and confirmed the experimental results. With the validated FE model, an intensive parametric study was conducted to investigate the effects of polyurea thickness, axial force ratio and impact energy on the lateral impact resistance of the UHPC column. The presence of the polyurea coating could significantly improve the lateral impact resistance of the specimen, thereby preventing the shear failure of the UHPC column, and thus, the effective thickness of the polyurea layer for the UHPC column was determined to be 2–6[Formula: see text]mm. The outcome of this research demonstrates the great merits of polyurea coating in improving the ductility and integrity of the UHPC column under lateral impact loading.

Strengthening of steel decks for cable-stayed bridge using ultra-high performance concrete: A case study

2020 ◽  
Vol 23 (16) ◽  
pp. 3373-3384
Author(s):  
Lei Wang ◽  
Xiaochao Su ◽  
Yafei Ma ◽  
Ming Deng ◽  
Jianren Zhang ◽  
...  
Keyword(s):  
High Performance ◽  
High Performance Concrete ◽  
Fatigue Cracking ◽  
Strengthening Effect ◽  
Steel Bridge ◽  
Ultra High Performance Concrete ◽  
Cable Stayed Bridge ◽  
Local Stresses ◽  
Orthotropic Steel Decks ◽  
Strengthening Method

Fatigue cracking induced by vehicle load is a prevalent problem in orthotropic steel decks. In addition, pavement debonding in steel bridge decks is another familiar issue resulting from low slip resistance in the faying surface between the steel and asphalt concrete. The present study proposed a strengthening method that uses ultra-high performance concrete to stiffen a repeatedly maintained cable-stayed bridge in order to help address these two problems. The existing issues of the real bridge and the corresponding causes were investigated. Following this, an ultra-high performance concrete paving system was designed to improve the stiffness of the orthotropic steel decks. For this paving system, a 45-mm ultra-high performance concrete layer was connected to the deck by welded shear studs. The local stresses at the typical vulnerable fatigue cracking points were determined by means of a finite element model and of a field loading test to evaluate the strengthening effect. The results showed that this strengthening method can prevent the propagation of fatigue cracks. The local stresses of the U-ribs and diaphragms were reduced by 45.4% and 40.0%, respectively. The repaired bridge has sufficient resistance against fatigue cracking based on the in situ observations.

scholarly journals Ground Glass Pozzolan in Conventional, High, and Ultra-High Performance Concrete

2018 ◽  
Vol 149 ◽  
pp. 01005 ◽  
Author(s):  
Arezki Tagnit-Hamou ◽  
Ablam Zidol ◽  
Nancy Soliman ◽  
Joris Deschamps ◽  
Ahmed Omran
Keyword(s):  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Ground Glass ◽  
Strengthening Effect ◽  
Ultra High Performance Concrete ◽  
Conventional Concrete ◽  
Supplementary Cementitious Material ◽  
Pozzolanic Material ◽  
And Performance

Ground-glass pozzolan (G) obtained by grinding the mixed-waste glass to same fineness of cement can act as a supplementary-cementitious material (SCM), given that it is an amorphous and a pozzolanic material. The G showed promising performances in different concrete types such as conventional concrete (CC), high-performance concrete (HPC), and ultra-high performance concrete (UHPC). The current paper reports on the characteristics and performance of G in these concrete types. The use of G provides several advantages (technological, economical, and environmental). It reduces the production cost of concrete and decrease the carbon footprint of a traditional concrete structures. The rheology of fresh concrete can be improved due to the replacement of cement by non-absorptive glass particles. Strength and rigidity improvements in the concrete containing G are due to the fact that glass particles act as inclusions having a very high strength and elastic modulus that have a strengthening effect on the overall hardened matrix.

Sign in / Sign up

Export Citation Format

Share Document