DFT investigation on organic dyes with cross-conjugated cyano groups

2014 ◽  
Vol 13 (01) ◽  
pp. 1450008
Author(s):  
Chunhe Yang ◽  
Aiwei Tang ◽  
Fujun Zhang ◽  
Feng Teng
Keyword(s):  
Density Functional ◽  
Molecular Conformation ◽  
Organic Dyes ◽  
Cyano Group ◽  
Energy Levels ◽  
Orbital Energy ◽  
Dye Molecules ◽  
Conjugated Molecules ◽  
Functional Theory ◽  
Cyano Groups

Organic dye molecules with the acceptor moieties, cyano groups, cross-conjugated to the donor moieties, have been investigated theoretically. Density functional theory (DFT) calculations on such cross-conjugated molecules reveal the effects of cross-conjugation on the geometric and electronic structures of the molecules. The cross-conjugated cyano groups in the dye molecules are found effective to alter the charge population and the frontier orbital energy levels of the dyes. The effects of cross-conjugation of cyano group on the molecular conformation, the charge transfer, and polarity of the dyes are discussed.

Efficeincy Improvement of Triphenylamine-Based Organic Dyes in DSSCs, An Effects of Linker Moiety

2013 ◽  
Vol 802 ◽  
pp. 257-261 ◽  
Author(s):  
Pakawat Chittratan ◽  
Prawonwan Thanakit ◽  
Wirat Jarernboon ◽  
Darinee Phromyothin
Keyword(s):  
Density Functional ◽  
Organic Dyes ◽  
Dye Sensitized Solar Cells ◽  
Dye Molecules ◽  
Functional Theory ◽  
Dye Sensitized ◽  
The Density Functional Theory ◽  
Sensitized Solar Cells ◽  
Bond Effect ◽  
Dye Molecule

Triphenylamine-base organic dyes were designed and investigated for dye-sensitized solar cells (DSSCs). The dye molecules consist of three parts, an electron-donor connected by the π-conjugated linker (benzene and thiophene) as an electron spacer and an acceptor/anchoring (cyanoacrylic acid). In this study, quantum chemical calculations were used to study the electronic properties, optical properties and density of electron in the linker of dye molecule by using the density functional theory. The results present that thiophene is the most appropriate to use as electron linker between triphenylamine donor and acrylic acceptor due to the wide of absorption band and π-conjugate bond effect on exhibiting red-shifted absorption spectra.

scholarly journals Charge Transfer Complexes of 1,3,6-Trinitro-9,10-phenanthrenequinone with Polycyclic Aromatic Compounds

Molecules ◽  
2021 ◽  
Vol 26 (21) ◽  
pp. 6391
Author(s):  
Roman Linko ◽  
Michael Ryabov ◽  
Pavel Strashnov ◽  
Pavel Dorovatovskii ◽  
Victor Khrustalev ◽  
...  
Keyword(s):  
Charge Transfer ◽  
Density Functional ◽  
Energy Levels ◽  
Orbital Energy ◽  
Charge Transfer Complexes ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
Donor And Acceptor ◽  
Polycyclic Aromatic ◽  
And Control

Understanding the interactions of organic donor and acceptor molecules in binary associates is crucial for design and control of their functions. Herein, we carried out a theoretical study on the properties of charge transfer complexes of 1,3,6-trinitro-9,10-phenanthrenequinone (PQ) with 23 aromatic π-electron donors. Density functional theory (DFT) was employed to obtain geometries, frontier orbital energy levels and amounts of charge transfer in the ground and first excited states. For the most effective donors, namely, dibenzotetrathiafulvalene, pentacene, tetrathiafulvalene, 5,10-dimethylphenazine, and tetramethyl-p-phenylenediamine, the amount of charge transfer in the ground state was shown to be 0.134−0.240 e−. Further, a novel charge transfer complex of PQ with anthracene was isolated in crystalline form and its molecular and crystal structure elucidated by single-crystal synchrotron X-ray diffraction.

On the Nature of Halide-Water Interactions: Insights from Many-Body Representations and Density Functional Theory

2019 ◽  
Author(s):  
Brandon B. Bizzarro ◽  
Colin K. Egan ◽  
Francesco Paesani
Keyword(s):  
Density Functional Theory ◽  
Charge Transfer ◽  
Molecular Orbital ◽  
Density Functional ◽  
Decomposition Analysis ◽  
Orbital Energy ◽  
Energy Decomposition Analysis ◽  
Interaction Energies ◽  
Many Body ◽  
Functional Theory

<div> <div> <div> <p>Interaction energies of halide-water dimers, X<sup>-</sup>(H<sub>2</sub>O), and trimers, X<sup>-</sup>(H<sub>2</sub>O)<sub>2</sub>, with X = F, Cl, Br, and I, are investigated using various many-body models and exchange-correlation functionals selected across the hierarchy of density functional theory (DFT) approximations. Analysis of the results obtained with the many-body models demonstrates the need to capture important short-range interactions in the regime of large inter-molecular orbital overlap, such as charge transfer and charge penetration. Failure to reproduce these effects can lead to large deviations relative to reference data calculated at the coupled cluster level of theory. Decompositions of interaction energies carried out with the absolutely localized molecular orbital energy decomposition analysis (ALMO-EDA) method demonstrate that permanent and inductive electrostatic energies are accurately reproduced by all classes of XC functionals (from generalized gradient corrected (GGA) to hybrid and range-separated functionals), while significant variance is found for charge transfer energies predicted by different XC functionals. Since GGA and hybrid XC functionals predict the most and least attractive charge transfer energies, respectively, the large variance is likely due to the delocalization error. In this scenario, the hybrid XC functionals are then expected to provide the most accurate charge transfer energies. The sum of Pauli repulsion and dispersion energies are the most varied among the XC functionals, but it is found that a correspondence between the interaction energy and the ALMO EDA total frozen energy may be used to determine accurate estimates for these contributions. </p> </div> </div> </div>

scholarly journals Chalcogen Bond versus Weak Hydrogen Bond: Changing Contributions in Determining the Crystal Packing of [1,2,5]-Chalcogenadiazole-Fused Tetracyanonaphthoquinodimethanes

2021 ◽  
Vol 03 (02) ◽  
pp. 090-096
Author(s):  
Yusuke Ishigaki ◽  
Kota Asai ◽  
Takuya Shimajiri ◽  
Tomoyuki Akutagawa ◽  
Takanori Fukushima ◽  
...  
Keyword(s):  
Hydrogen Bond ◽  
Density Functional ◽  
Molecular Design ◽  
Crystal Packing ◽  
Cyano Group ◽  
Density Functional Theory Calculations ◽  
Weak Hydrogen Bond ◽  
Functional Theory ◽  
Chalcogen Bond ◽  
Thiadiazole Ring

The crystal structures of a series of tetracyanonaphthoquinodimethanes fused with a selenadiazole or thiadiazole ring revealed that their molecular packing is determined mainly by two intermolecular interactions: chalcogen bond (ChB) and weak hydrogen bond (WHB). ChB between Se and a cyano group dictates the packing of selenadiazole derivatives, whereas the S-based ChB is much weaker and competes with WHB in thiadiazole analogues. This difference can be explained by different electrostatic potentials as revealed by density functional theory calculations. A proper molecular design that weakens WHB can change the contribution of ChB in determining the crystal packing of thiadiazole derivatives.

scholarly journals Unraveling the electrochemical and spectroscopic properties of neutral and negatively charged perylene tetraethylesters

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Christian Wiebeler ◽  
Joachim Vollbrecht ◽  
Adam Neuba ◽  
Heinz-Siegfried Kitzerow ◽  
Stefan Schumacher
Keyword(s):  
Absorption Spectra ◽  
Density Functional ◽  
Energy Levels ◽  
Spectroscopic Properties ◽  
Absorption Bands ◽  
Functional Theory ◽  
Vertical Excitation ◽  
Hartree Fock ◽  
Tauc Plot ◽  
Electrochemical Approach

AbstractA detailed investigation of the energy levels of perylene-3,4,9,10-tetracarboxylic tetraethylester as a representative compound for the whole family of perylene esters was performed. It was revealed via electrochemical measurements that one oxidation and two reductions take place. The bandgaps determined via the electrochemical approach are in good agreement with the optical bandgap obtained from the absorption spectra via a Tauc plot. In addition, absorption spectra in dependence of the electrochemical potential were the basis for extensive quantum-chemical calculations of the neutral, monoanionic, and dianionic molecules. For this purpose, calculations based on density functional theory were compared with post-Hartree–Fock methods and the CAM-B3LYP functional proved to be the most reliable choice for the calculation of absorption spectra. Furthermore, spectral features found experimentally could be reproduced with vibronic calculations and allowed to understand their origins. In particular, the two lowest energy absorption bands of the anion are not caused by absorption of two distinct electronic states, which might have been expected from vertical excitation calculations, but both states exhibit a strong vibronic progression resulting in contributions to both bands.

scholarly journals A New Piano-Stool Ruthenium(II) P-Cymene-Based Complex: Crystallographic, Hirshfeld Surface, DFT, and Luminescent Studies

Crystals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 13
Author(s):  
Mohd. Muddassir ◽  
Abdullah Alarifi ◽  
Mohd. Afzal
Keyword(s):  
Density Functional ◽  
Weak Interactions ◽  
Energy Levels ◽  
Hirshfeld Surface ◽  
Binding Energies ◽  
Orbital Energy ◽  
Aminosalicylic Acid ◽  
Full Characterization

A new complex (Ru(η6-p-cymene)(5-ASA)Cl2) (1) where 5-ASA is 5-aminosalicylic acid has been prepared by reacting the ruthenium arene precursors ((η6-arene)Ru(μ-Cl)Cl)2, with the 5-ASA ligands in a 1:1 ratio. Full characterization of complex 1 was accomplished by elemental analysis, IR, and TGA following the structure obtained from a single-crystal X-ray pattern. The structural analysis revealed that complex 1 shows a “piano-stool” geometry with Ru-C (2.160(5)- 2.208(5)Å), Ru-N (2.159(4) Å) distances, which is similar to equivalents sister complex. Density functional theory (DFT) was used to calculate the significant molecular orbital energy levels, binding energies, bond angles, bond lengths, and spectral data (FTIR, NMR, and UV–VIS) of complex 1, consistent with the experimental results. The IR and UV–VIS spectra of complex 1 were computed using all of the methods and choose the most appropriate way to discuss. Hirshfeld surface analysis was also executed to understand the role of weak interactions such as H⋯H, C⋯H, C-H⋯π, and vdW interactions, which play a significant role in the crystal environment’s stability. Moreover, the luminescence results at room temperature show that complex 1 gives a more intense emission band positioned at 465 nm upon excitation at 330 nm makes it a suitable candidate for the building of photoluminescent material.

scholarly journals Application of β-Phosphorylated Nitroethenes in [3+2] Cycloaddition Reactions Involving Benzonitrile N-Oxide in the Light of a DFT Computational Study

Organics ◽  
2021 ◽  
Vol 2 (1) ◽  
pp. 26-37
Author(s):  
Karolina Zawadzińska ◽  
Karolina Kula
Keyword(s):  
Density Functional ◽  
Reaction Path ◽  
Computational Study ◽  
Cyano Group ◽  
Cycloaddition Reactions ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Reaction Channels ◽  
One Step ◽  
Step Mechanism

The regiochemistry of [3+2] cycloaddition (32CA) processes between benzonitrile N-oxide 1 and β-phosphorylated analogues of nitroethenes 2a–c has been studied using the Density Functional Theory (DFT) at the M062X/6-31+G(d) theory level. The obtained results of reactivity indices show that benzonitrile N-oxide 1 can be classified both as a moderate electrophile and moderate nucleophile, while β-phosphorylated analogues of nitroethenes 2a–c can be classified as strong electrophiles and marginal nucleophiles. Moreover, the analysis of CDFT shows that for [3+2] cycloadditions with the participation of β-phosphorylatednitroethene 2a and β-phosphorylated α-cyanonitroethene 2b, the more favored reaction path forms 4-nitro-substituted Δ2-isoxazolines 3a–b, while for a reaction with β-phosphorylated β-cyanonitroethene 2c, the more favored path forms 5-nitro-substituted Δ2-isoxazoline 4c. This is due to the presence of a cyano group in the alkene. The CDFT study correlates well with the analysis of the kinetic description of the considered reaction channels. Moreover, DFT calculations have proven the clearly polar nature of all analyzed [3+2] cycloaddition reactions according to the polar one-step mechanism.

A theoretical study on solvatofluorochromic asymmetric thiazolothiazole (TTz) dyes using dielectric-dependent density functional theory

2021 ◽  
Vol 23 (37) ◽  
pp. 21078-21086
Author(s):  
Tomomi Shimazaki ◽  
Masanori Tachikawa
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Theoretical Study ◽  
Dye Molecules ◽  
Excitation Energies ◽  
Functional Theory ◽  
Dependent Density

In this work, the excitation energies of asymmetric thiazolothizaole (TTz) dye molecules have been theoretically studied using dielectric-dependent density functional theory (DFT).

scholarly journals Taguchi-Assisted Optimization Technique and Density Functional Theory for Green Synthesis of a Novel Cu-MOF Derived From Caffeic Acid and Its Anticancerious Activities

2021 ◽  
Vol 9 ◽  
Author(s):  
Malihe Zeraati ◽  
Ali Mohammadi ◽  
Somayeh Vafaei ◽  
Narendra Pal Singh Chauhan ◽  
Ghasem Sargazi
Keyword(s):  
Density Functional Theory ◽  
Caffeic Acid ◽  
Density Functional ◽  
Energy Levels ◽  
Optimization Technique ◽  
Nitrogen Adsorption ◽  
High Porosity ◽  
Anticancer Activities ◽  
Functional Theory ◽  
Sem Analyses

In this paper, we have reported an innovative greener method for developing copper-metal organic frameworks (Cu-MOFs) using caffeic acid (CA) as a linker extracted from Satureja hortensis using ultrasonic bath. The density functional theory is used to discuss the Cu-MOF-binding reaction mechanism. In order to achieve a discrepancy between the energy levels of the interactive precursor orbitals, the molecules have been optimized using the B3LYP/6–31G method. The Taguchi method was used to optimize the key parameters for the synthesis of Cu-MOF. FT-IR, XRD, nitrogen adsorption, and SEM analyses are used to characterize it. The adsorption/desorption and SEM analyses suggested that Cu-MOF has a larger surface area of 284.94 m2/g with high porosity. Cu-MOF has shown anticancer activities against the human breast cancer (MDA-MB-468) cell lines, and it could be a potent candidate for clinical applications.

Sign in / Sign up

Export Citation Format

Share Document