Enhanced Piezoelectric Performance of Electrospun PVDF-MWCNT-Cu Nanocomposites for Energy Harvesting Application

NANO ◽  
2020 ◽  
Vol 15 (04) ◽  
pp. 2050049 ◽  
Author(s):  
Ramadoss Tamil Selvan ◽  
Choo Yan Jia ◽  
W. A. D. M. Jayathilaka ◽  
Amutha Chinappan ◽  
Hilaal Alam ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Lead Zirconate Titanate ◽  
Polyvinylidene Fluoride ◽  
Composite Nanofibers ◽  
Piezoelectric Materials ◽  
Mechanical Energy ◽  
Polymeric Materials ◽  
Multiwalled Carbon ◽  
Peak Voltage ◽  
Piezoelectric Device

Piezoelectric principle is one of the popular choices when it comes to mechanical energy recovery and conversion of energy into electrical energy which can be either stored or used straightaway. In general, ceramic-based piezoelectric materials like Lead Zirconate Titanate (PZT) had been the popular choice for piezoelectric devices even though they are brittle in nature and found to be toxic in long uses. At the same time, organic-based Polyvinylidene Fluoride (PVDF) and similar polymeric materials have been used in different applications with an offer of flexibility, lightweight and biocompatibility. One major factor dragging down the usage of organic materials in piezoelectric applications is their poor piezoelectric responses. In this work, authors are reporting the enhanced piezoelectric properties of nanofibers of PVDF in composite with copper nanoparticles and Multiwalled Carbon Nanotubes (MWCNTs). Fourier Transformation Infrared (FTIR) analysis has been carried out for nanofibers and was able to prove the higher beta phase conversion of PVDF in composite nanofibers when compared with pristine nanofibers. Composite nanofibers were later fabricated into a piezoelectric device with two electrodes and have shown a peak voltage of 6.78 V upon a drop test. As a proof of concept, the mentioned piezoelectric device was integrated into a shoe-based prototype where it has shown 18–20[Formula: see text]V energy harvesting upon walking at leisurely pace.

Multifunctional composite nanofibers with shape memory and piezoelectric properties for energy harvesting

2020 ◽  
Vol 31 (7) ◽  
pp. 956-966 ◽  
Author(s):  
Xiaoyu Guan ◽  
Hairong Chen ◽  
Hong Xia ◽  
Yaqin Fu ◽  
Yiping Qiu ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Shape Memory ◽  
Lead Zirconate Titanate ◽  
Composite Nanofibers ◽  
Piezoelectric Materials ◽  
Lead Zirconate ◽  
Silane Coupling Agents ◽  
Zirconate Titanate ◽  
Shape Memory Effects ◽  
Shape Memory Polyurethane

Although many kinds of flexible piezoelectric materials have been developed, there were few reports on flexible multifunctional nanofibers for energy harvesting. In this study, we prepared multifunctional nanofibers from lead zirconate titanate particles and shape memory polyurethane by electrospinning. The resulting nanofibers had both piezoelectric and shape memory effects. To improve the dispersion, lead zirconate titanate particles were modified by silane coupling agents. The lead zirconate titanate/shape memory polyurethane nanofibers were used to harvest energy from sinusoidal vibrations, and the lead zirconate titanate 80 wt% sample produced voltages of 120.3 mV (peak-to-peak). Taking advantage of the shape memory effect, the lead zirconate titanate/shape memory polyurethane nanofibers can be easily deformed into desired shapes and revealed the potential for realizing energy harvesting in complex structures.

scholarly journals SIMULATION AND ANALYSIS OF DIFFERENT PIEZOELECTRIC MATERIALS IN MEMS CANTILEVER FOR ENERGY HARVESTING

2021 ◽  
Vol 9 (1) ◽  
pp. 1321-1328
Author(s):  
Abdul Aziz Khan J , Shanmugaraja P , Kannan S
Keyword(s):  
Energy Harvesting ◽  
Lead Zirconate Titanate ◽  
Piezoelectric Materials ◽  
Low Frequency ◽  
Lead Zirconate ◽  
Vital Role ◽  
Von Mises Stress ◽  
And Performance ◽  
Von Mises ◽  
Implantable Sensor

MEMS Energy Harvesting(EH) devices are excepted to grow in the upcoming years, due to the increasing aspects of MEMS EH devices in vast applications. In Recent advancements in energy harvesting (EH) technologies wireless sensor devices play a vital role to extend their lifetime readily available in natural resources. In this paper the design of MEMS Cantilever at low frequency (100Hz) with different piezoelectric materials Gallium Arsenide (GaAs), Lead Zirconate Titanate (PZT-8), Tellurium Dioxide (TeO2), Zinc oxide (ZnO) is simulated and performance with different materials are compared. The results are analyzed with various parameters such as electric potential voltage, von mises stress, displacement. The paper discusses the suitability of the piezoelectric material for MEMS fully cochlear implantable sensor application.

scholarly journals Hollow Piezoelectric Ceramic Fibers for Energy Harvesting Fabrics

2013 ◽  
Vol 8 (1) ◽  
pp. 155892501300800
Author(s):  
François M. Guillot ◽  
Haskell W. Beckham ◽  
Johannes Leisen
Keyword(s):  
Energy Harvesting ◽  
Lead Zirconate Titanate ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Electrical Energy ◽  
Lead Zirconate ◽  
Ceramic Fibers ◽  
Power Sources ◽  
Electromechanical Performance ◽  
Alternative Power

In the past few years, the growing need for alternative power sources has generated considerable interest in the field of energy harvesting. A particularly exciting possibility within that field is the development of fabrics capable of harnessing mechanical energy and delivering electrical power to sensors and wearable devices. This study presents an evaluation of the electromechanical performance of hollow lead zirconate titanate (PZT) fibers as the basis for the construction of such fabrics. The fibers feature individual polymer claddings surrounding electrodes directly deposited onto both inside and outside ceramic surfaces. This configuration optimizes the amount of electrical energy available by placing the electrodes in direct contact with the surface of the material and by maximizing the active piezoelectric volume. Hollow fibers were electroded, encapsulated in a polymer cladding, poled and characterized in terms of their electromechanical properties. They were then glued to a vibrating cantilever beam equipped with a strain gauge, and their energy harvesting performance was measured. It was found that the fibers generated twice as much energy density as commercial state-of-the-art flexible composite sensors. Finally, the influence of the polymer cladding on the strain transmission to the fiber was evaluated. These fibers have the potential to be woven into fabrics that could harvest mechanical energy from the environment and could eventually be integrated into clothing.

Mechanical energy harvesting properties of free-standing carbyne enriched carbon film derived from dehydrohalogenation of polyvinylidene fluoride

Nano Energy ◽  
2019 ◽  
Vol 59 ◽  
pp. 453-463 ◽  
Author(s):  
Karthikeyan Krishnamoorthy ◽  
Vimal Kumar Mariappan ◽  
Parthiban Pazhamalai ◽  
Surjit Sahoo ◽  
Sang-Jae Kim
Keyword(s):  
Energy Harvesting ◽  
Polyvinylidene Fluoride ◽  
Mechanical Energy ◽  
Carbon Film ◽  
Free Standing

Mechanistic Modeling and Economic Analysis of Piezoelectric Energy Harvesting Potential in Airport Pavements

2020 ◽  
Vol 2674 (11) ◽  
pp. 64-75
Author(s):  
Jingnan Zhao ◽  
Hao Wang
Keyword(s):  
Energy Harvesting ◽  
Economic Analysis ◽  
Power Output ◽  
Piezoelectric Materials ◽  
Mechanical Energy ◽  
Mechanistic Modeling ◽  
Piezoelectric Energy Harvesting ◽  
Levelized Cost Of Electricity ◽  
Near Surface ◽  
Piezoelectric Energy

This study investigated the feasibility of applying piezoelectric energy harvesting technology in airfield pavements through mechanistic modeling and economic analysis. The energy harvesting performance of piezoelectric transducers was evaluated based on mechanical energy induced by multi-wheel aircraft loading on flexible airfield pavements. A three-dimensional finite element model was used to estimate the stress pulse and magnitude under moving aircraft tire loading. A stack piezoelectric transducer design was used to estimate the power output of a piezoelectric harvester embedded at different locations and depths in the pavement. The aircraft load and speed were found to be vital factors affecting the power output, along with the installation depth and horizontal locations of the energy harvester. On the other hand, the installation of the energy module had a negligible influence on the horizontal tensile strains at the bottom of the asphalt layer and compressive strains on the top of the subgrade. However, the near-surface pavement strains increased when the edge ribs of the tire were loaded on the energy module. Feasibility analysis results showed that the calculated levelized cost of electricity was high in general, although it varies depending on the airport traffic levels and the service life of the energy module. With the development of piezoelectric materials and technology, further evaluation of energy harvesting applications at airports needs to be conducted.

Mechanical energy harvesting using polyurethane/lead zirconate titanate composites

2017 ◽  
Vol 52 (9) ◽  
pp. 1171-1182 ◽  
Author(s):  
Abdelkader Rjafallah ◽  
Abdelowahed Hajjaji ◽  
Fouad Belhora ◽  
Daniel Guyomar ◽  
Laurence Seveyrat ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Lead Zirconate Titanate ◽  
Microelectromechanical Systems ◽  
Volume Fraction ◽  
Mechanical Energy ◽  
Mechanical Strain ◽  
Lead Zirconate ◽  
Inorganic Materials ◽  
Zirconate Titanate ◽  
Electromechanical Transduction

The microelectromechanical systems invade gradually the market with applications in many sectors of activity. Developing these micro-systems allows deploying wireless sensor networks that are useful to collect, process and transmit information from their environments without human intervention. In order to keep these micro-devices energetically autonomous without using batteries because they have a limited lifespan, an energy harvesting from ambient vibrations using electrostrictive polymers can be used. These polymers present best features against inorganic materials, as flexibility and low cost. The aims of this paper are manifold. First of all, we made elaboration of the polyurethane/lead zirconate titanate films of 100 µm thickness using a lead zirconate titanate–volume fraction of [Formula: see text]%. Therefore, we did an observation of the lead zirconate titanate grains dispersion and the electrical characterization of the polyurethane–50 vol% lead zirconate titanate composites. Finally, a detailed study of the electromechanical transduction, for the polyurethane–50 vol% lead zirconate titanate unpolarized and polarized composites sustained to the sinusoidal mechanical strain with amplitude of 1.5% and at very low frequencies ( f = 2 [Hz] and f = 4 [Hz]) and static electric field ( Edc = 10 [ V/µm]) or without it ( Edc = 0 [ V/µm]) has been presented.

scholarly journals Pedestrian crossing system for the mechanical energy harvesting using piezoelectric materials

2020 ◽  
Vol 948 ◽  
pp. 012030
Author(s):  
Zakaria Malki ◽  
Chouaib Ennawaoui ◽  
Abdelowahed Hajjaji ◽  
Ikram Najihi ◽  
Mohamed Eljouad ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Piezoelectric Materials ◽  
Mechanical Energy ◽  
Pedestrian Crossing

scholarly journals A New Prospect in Road Traffic Energy Harvesting Using Lead-Free Piezoceramics

Materials ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 3725 ◽  
Author(s):  
Manuel Vázquez-Rodríguez ◽  
Francisco J. Jiménez ◽  
Lorena Pardo ◽  
Pilar Ochoa ◽  
Amador M. González ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Lead Zirconate Titanate ◽  
Test Bench ◽  
Road Traffic ◽  
Piezoelectric Materials ◽  
Piezoelectric Ceramics ◽  
Maximum Power ◽  
Lead Free ◽  
Mechanical Stimuli ◽  
Electrical Model

In this paper, a new prospect using lead-free piezoelectric ceramics is presented in order to determine their behavior in piezoelectric-based road traffic energy harvesting applications. This paper will describe the low-cost and fully programmable novel test bench developed. The test bench includes a traffic simulator and acquires the electrical signals of the piezoelectric materials and the energy harvested when stress is produced by analogous mechanical stimuli to road traffic effects. This new computer-controlled laboratory instrument is able to obtain the active electrical model of the piezoelectric materials and the generalized linear equivalent electrical model of the energy storage and harvesting circuits in an accurate and automatized empirical process. The models are originals and predict the extracted maximum power. The methodology presented allows the use of only two load resistor values to empirically verify the value of the output impedance of the harvester previously determined by simulations. This parameter is unknown a priori and is very relevant for optimizing the energy harvesting process based on maximum power point algorithms. The relative error achieved between the theoretical analysis by applying the models and the practical tests with real harvesting systems is under 3%. The environmental concerns are explored, highlighting the main differences between lead-containing (lead zirconate titanate, PZT) and lead-free commercial piezoelectric ceramics in road traffic energy harvesting applications.

scholarly journals Analysis and Comparison of Macro Fiber Composites and Lead Zirconate Titanate (PZT) Discs for an Energy Harvesting Floor

2020 ◽  
Vol 10 (17) ◽  
pp. 5951
Author(s):  
Carlos Quiterio Gómez Muñoz ◽  
Gabriel Zamacola Alcalde ◽  
Fausto Pedro García Márquez
Keyword(s):  
Energy Harvesting ◽  
Lead Zirconate Titanate ◽  
Piezoelectric Materials ◽  
Low Cost ◽  
Clean Energy ◽  
Lead Zirconate ◽  
Piezoelectric Transducers ◽  
Piezoelectric Energy ◽  
Pressure Cycle ◽  
Low Consumption

The main drawback in many electronic devices is the duration of their batteries. Energy harvesting provides a solution for these low-consumption devices. Piezoelectric energy harvesting use is growing because it collects small amounts of clean energy and transforms it to electricity. Synthetic piezoelectric materials are a feasible alternative to generate energy for low consumption systems. In addition to the energy generation, each pressure cycle in the piezoelectric material can provide information for the device, for example, counting the passage of people. The main contribution of this work is to study, build, and test a low-cost energy harvesting floor using piezoelectric transducers to estimate the amount of energy that could be produced for a connected device. Several piezoelectric transducers have been employed and analyzed, providing accurate results.

Sign in / Sign up

Export Citation Format

Share Document