TRANSPORT PROPERTIES IN MISFIT-LAYERED Ca2Co2O5 COMPOUND

2013 ◽  
Vol 06 (05) ◽  
pp. 1340001 ◽  
Author(s):  
JINLE LAN ◽  
BIN ZHAN ◽  
YUAN-HUA LIN ◽  
CE-WEN NAN ◽  
YAO-CHUN LIU

The low temperature transport and magnetic properties were investigated in the misfit-layered Ca 2 Co 2 O 5 compound. The compound exhibits incommensurate spin-density-wave (SDW) state in the dχ-1/dT curve at 20 K, which is confirmed by the resistivity (ρ) characterization. The resistivity shows an upturn from metallic to insulating behavior at TM-I (130 K) and strong Fermi liquid behaviors with ρ ~ T2 relation between TM-I and T*(225 K ). The Seebeck coefficient shows abnormal temperature dependence at Tp (40 K), which is suggested to origin from the long order of atomic in [ Ca 2 CoO 3] sublayer and spin fluctuation of Co ions. Moreover, large Seebeck coefficient (120 μV/K) and low thermal conductivity (2.5 W/mK) were obtained at room temperature, indicating that it is a promising p-type thermoelectric material for energy conversion.

2021 ◽  
Vol 11 (2) ◽  
pp. 508
Author(s):  
Swagata Acharya ◽  
Dimitar Pashov ◽  
Elena Chachkarova ◽  
Mark van Schilfgaarde ◽  
Cédric Weber

At a temperature of roughly 1 K, Sr2RuO4 undergoes a transition from a normal Fermi liquid to a superconducting phase. Even while the former is relatively simple and well understood, the superconducting state has not even been understood after 25 years of study. More recently, it has been found that critical temperatures can be enhanced by the application of uniaxial strain, up to a critical strain, after which it falls off. In this work, we take an “instability” approach and seek divergences in susceptibilities. This provides an unbiased way to distinguish tendencies to competing ground states. We show that in the unstrained compound, the singlet and triplet instabilities of the normal Fermi liquid phase are closely spaced. Under uniaxial strain, electrons residing on all orbitals contributing to the Fermiology become more coherent, while the electrons of the Ru-dxy character become heavier, and the electrons of the Ru-dxz,yz characters become lighter. In the process, Im χ(q,ω) increases rapidly around q=(0.3,0.3,0)2π/a and q=(0.5,0.25,0)2π/a, while it gets suppressed at all other commensurate vectors, in particular at q=0, which is essential for spin-triplet superconductivity. We observe that the magnetic anisotropy under strain drops smoothly, which is concomitant with the increment in singlet instability. Thus, the triplet superconducting instability remains the lagging instability of the system, and the singlet instability enhances under strain, leading to a large energy-scale separation between these competing instabilities. However, since this happens even without spin-orbit coupling, we believe it is primarily the enhancement in the spin fluctuation glue around quasi-anti-ferromagnetic vectors that drives the Cooper pairing instead of the magnetic anisotropy. At large strain, an instability to a spin density wave overtakes the superconducting one. The analysis relies on a high-fidelity, ab initio description of the one-particle properties and two-particle susceptibilities, based on the quasiparticle self-consistent GWapproximation augmented by dynamical mean field theory. This approach is described and its high fidelity confirmed by comparing to observed one- and two-particle properties.


2012 ◽  
Vol 621 ◽  
pp. 167-171
Author(s):  
Tao Hua Liang ◽  
Shi Qing Yang ◽  
Zhi Chen ◽  
Qing Xue Yang

p-type Bi0.5Sb1.5Te3+xTe thermoelectric crystals with various percentages of Te (x = 0.00 wt.%–3.00 wt.%) excess were prepared by the gradient freeze method. By doping with different Te contents, anti-site defects, Te vacancies and hole carrier concentrations were controlled. The Seebeck coefficient, resistivity, thermal conductivity, carrier concentration, and mobility were measured. The relationships between the Te content and thermoelectric properties were investigated in detail. The results suggested that the thermoelectric figure of merit ZT of the Bi0.5Sb1.5Te3+0.09wt.% crystals was 1.36 near room temperature, the optimum carrier concentration was 1.25 × 1019 cm-3, and the mobility was 1480 cm2 V-1 S-1, respectively.


Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 386
Author(s):  
Magali Allain ◽  
Cécile Mézière ◽  
Pascale Auban-Senzier ◽  
Narcis Avarvari

Tetramethyl-tetraselenafulvalene (TMTSF) and bis(ethylenedithio)-tetrathiafulvalene (BEDT-TTF) are flagship precursors in the field of molecular (super)conductors. The electrocrystallization of these donors in the presence of (n-Bu4N)TaF6 or mixtures of (n-Bu4N)TaF6 and (n-Bu4N)PF6 provided Bechgaard salts formulated as (TMTSF)2(TaF6)0.84(PF6)0.16, (TMTSF)2(TaF6)0.56(PF6)0.44, (TMTSF)2(TaF6)0.44(PF6)0.56 and (TMTSF)2(TaF6)0.12(PF6)0.88, together with the monoclinic and orthorhombic phases δm-(BEDT-TTF)2(TaF6)0.94(PF6)0.06 and δo-(BEDT-TTF)2(TaF6)0.43(PF6)0.57, respectively. The use of BEDT-TTF and a mixture of (n-Bu4N)TaF6/TaF5 afforded the 1:1 phase (BEDT-TTF)2(TaF6)2·CH2Cl2. The precise Ta/P ratio in the alloys has been determined by an accurate single crystal X-ray data analysis and was corroborated with solution 19F NMR measurements. In the previously unknown crystalline phase (BEDT-TTF)2(TaF6)2·CH2Cl2 the donors organize in dimers interacting laterally yet no organic-inorganic segregation is observed. Single crystal resistivity measurements on the TMTSF based materials show typical behavior of the Bechgaard phases with room temperature conductivity σ ≈ 100 S/cm and localization below 12 K indicative of a spin density wave transition. The orthorhombic phase δo-(BEDT-TTF)2(TaF6)0.43(PF6)0.57 is semiconducting with the room temperature conductivity estimated to be σ ≈ 0.16–0.5 S/cm while the compound (BEDT-TTF)2(TaF6)2·CH2Cl2 is also a semiconductor, yet with a much lower room temperature conductivity value of 0.001 to 0.0025 S/cm, in agreement with the +1 oxidation state and strong dimerization of the donors.


2003 ◽  
Vol 793 ◽  
Author(s):  
Y. Amagai ◽  
A. Yamamoto ◽  
C. H. Lee ◽  
H. Takazawa ◽  
T. Noguchi ◽  
...  

ABSTRACTWe report transport properties of polycrystalline TMGa3(TM = Fe and Ru) compounds in the temperature range 313K<T<973K. These compounds exhibit semiconductorlike behavior with relatively high Seebeck coefficient, electrical resistivity, and Hall carrier concentrations at room temperature in the range of 1017- 1018cm−3. Seebeck coefficient measurements reveal that FeGa3isn-type material, while the Seebeck coefficient of RuGa3changes signs rapidly from large positive values to large negative values around 450K. The thermal conductivity of these compounds is estimated to be 3.5Wm−1K−1at room temperature and decreased to 2.5Wm−1K−1for FeGa3and 2.0Wm−1K−1for RuGa3at high temperature. The resulting thermoelectric figure of merit,ZT, at 945K for RuGa3reaches 0.18.


Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4524
Author(s):  
Amin Nozariasbmarz ◽  
Daryoosh Vashaee

Depending on the application of bismuth telluride thermoelectric materials in cooling, waste heat recovery, or wearable electronics, their material properties, and geometrical dimensions should be designed to optimize their performance. Recently, thermoelectric materials have gained a lot of interest in wearable electronic devices for body heat harvesting and cooling purposes. For efficient wearable electronic devices, thermoelectric materials with optimum properties, i.e., low thermal conductivity, high Seebeck coefficient, and high thermoelectric figure-of-merit (zT) at room temperature, are demanded. In this paper, we investigate the effect of glass inclusion, microwave processing, and annealing on the synthesis of high-performance p-type (BixSb1−x)2Te3 nanocomposites, optimized specially for body heat harvesting and body cooling applications. Our results show that glass inclusion could enhance the room temperature Seebeck coefficient by more than 10% while maintaining zT the same. Moreover, the combination of microwave radiation and post-annealing enables a 25% enhancement of zT at room temperature. A thermoelectric generator wristband, made of the developed materials, generates 300 μW power and 323 mV voltage when connected to the human body. Consequently, MW processing provides a new and effective way of synthesizing p-type (BixSb1−x)2Te3 alloys with optimum transport properties.


2006 ◽  
Vol 929 ◽  
Author(s):  
Bangke Zheng ◽  
S. Budak ◽  
C. Muntele ◽  
Z. Xiao ◽  
S. Celaschi ◽  
...  

ABSTRACTWe made p-type nanoscale super lattice thermoelectric cooling devices which consist of multiple periodic layers of Si1−x Gex / Si, The thickness of each layer ranges between 10 and 50 nm. The super lattice was bombarded by 5 MeV Si ion with different fluencies aiming to form nano-cluster quantum dot structures. We estimated the thermo-electric efficiency of the so fabricated devices, measuring the thin film cross plane thermal conductivity by the 3rd harmonic method, measuring the cross plane Seebeck coefficient, and finally measuring the cross plane electric conductivity before and after ion bombardment. As predicted, the thermo-electric Figure of Merit of the films increases with increasing Si ion fluencies. In addition to the effect of quantum well confinement of the phonon transmission, the nano-scale crystal quantum dots produced by the incident Si beam further adversely affects the thermal conductivity by absorbing and dissipating phonon along the lattice, and therefore further reduces the cross plane thermal conductivity, This process increases the electron density of state therefore increasing Seebeck coefficient, and the electric conductivity.


2018 ◽  
Vol 773 ◽  
pp. 145-151
Author(s):  
Min Soo Park ◽  
Gook Hyun Ha ◽  
Hye Young Koo ◽  
Yong Ho Park

The Bi–Te thermoelectric system shows an excellent figure of merit (ZT) near room temperature. Research on increasing the ZT value for n‑type Bi–Te is imperative because the thermoelectric properties of this compound are inferior to those of the p-type material. For this purpose, n-type Bi2Te3-ySey powders with various amounts of Se dopant (0.3 ≤ y ≤ 0.6) were synthesized by a vacuum melting-grinding process to improve the physical properties. The ZT value of the sintered bodies was investigated in the temperature range of 298–423 K with regard to the electrical and thermal characteristics. As the Se content increased, the electrical conductivity decreased owing to a reduction in the carrier concentration, which improved the overall value of ZT. The thermal conductivity clearly decreased as the Se content increased in the temperature range of 298–373 K due to increased alloy scattering, as well as a reduction in the lattice thermal conductivity caused by crystal grain boundary scattering. At room temperature, Bi2Te2.7Se0.3 (y = 0.3) exhibited the highest ZT of 0.85. At increased temperatures, the ZT value was highest for Bi2Te2.55Se0.45 (y = 0.45), indicating that the optimal effect of the Se dopants varies depending on the temperature range.


2014 ◽  
Vol 809-810 ◽  
pp. 3-8
Author(s):  
Peng Xian Lu

In order to increase the electrical conductivity greatly but maintain a large Seebeck coefficient and a low thermal conductivity simultaneously, the binary-phased LaCeFe3CoSb12-Sb nanocomposites composed of LaCeFe3CoSb12skutterudite nanospheres and semimetal Sb microsized ribbons were fabricated via a hydro/solvo thermal route. The results suggest that the Sb powders result in a disordered structure during a hot-press process at its melting-point temperature and the disordered structure has been partly preserved into the room-temperature materials successfully. The Sb microsized ribbons enhance the electrical conductivity of the binary-phased materials largely, meanwhile the disordered structure increases the Seebeck coefficient obviously even though the thermal conductivity is also increased slightly. Consequently, the figure of merit of the binary-phased materials is improved significantly and the maximum value of 1.54 at 773 K has been realized for the LaCeFe3CoSb15material.


Author(s):  
А.И. Таранова ◽  
А.П. Новицкий ◽  
А.И. Воронин ◽  
С.В. Таскаев ◽  
В.В. Ховайло

In this work the results of an experimental study of Fe2Ti1-xVxSn alloys (x = 0; 0.06; 0.15; 0.2) are presented. According to the temperature dependencies of the electrical conductivity, Seebeck coefficient and thermal conductivity, it is established, that the studied compositions exhibit transport properties typical for semiconductors. The substitution of V at the Ti site leads to a change of the p-type electrical conductivity behavior to n-type; the pristine sample of Fe2TiSn has the best thermoelectric properties.


Sign in / Sign up

Export Citation Format

Share Document