Elastic Turbulence: An Experimental View on Inertialess Random Flow

2021 ◽  
Vol 53 (1) ◽  
pp. 27-58
Author(s):  
Victor Steinberg
Keyword(s):  
Spectral Properties ◽  
Pressure Fluctuations ◽  
Random Motion ◽  
Back Reaction ◽  
Formal Similarity ◽  
Chaotic Flow ◽  
Physical Mechanisms ◽  
Tiny Amount ◽  
Wide Range ◽  
Random Flow

A viscous solvent laminar flow may be strongly modified by the addition of a tiny amount of long polymer molecules, resulting in a chaotic flow called elastic turbulence (ET). ET is attributed to polymer stretching, which generates elastic stress and its back reaction on the flow. Its properties are analogous to those observed in hydrodynamic turbulence, although the formal similarity does not imply a similarity in physical mechanisms underlining these two types of random motion. Here we review the statistical and spectral properties and the spatial structure of the velocity field, the statistical and spectral properties of pressure fluctuations, and scaling of the friction factor of ET in wall-bounded and unbounded flow geometries, as observed in experiments and numerical simulations and described by theory for a wide range of control parameters and polymer concentrations.

Calibration of Mobility and Interface Trap Parameters for High Temperature TCAD Simulation of 4H-SiC VDMOSFETs

2012 ◽  
Vol 717-720 ◽  
pp. 1101-1104 ◽  
Author(s):  
M.G. Jaikumar ◽  
Shreepad Karmalkar
Keyword(s):  
Surface Roughness ◽  
Measured Data ◽  
Interface Trap Density ◽  
Interface Trap ◽  
Material Parameters ◽  
Velocity Saturation ◽  
Physical Mechanisms ◽  
Surface Roughness Scattering ◽  
Wide Range ◽  
Tcad Simulation

4H-Silicon Carbide VDMOSFET is simulated using the Sentaurus TCAD package of Synopsys. The simulator is calibrated against measured data for a wide range of bias conditions and temperature. Material parameters of 4H-SiC are taken from literature and used in the available silicon models of the simulator. The empirical parameters are adjusted to get a good fit between the simulated curves and measured data. The simulation incorporates the bias and temperature dependence of important physical mechanisms like interface trap density, coulombic interface trap scattering, surface roughness scattering and velocity saturation.

THE ELECTRONIC STRUCTURE AT ORGANIC–2D MATERIAL HETEROINTERFACES

2021 ◽  
pp. 2140003
Author(s):  
YU LI HUANG ◽  
ANDREW THYE SHEN WEE
Keyword(s):  
Charge Transfer ◽  
Electronic Structures ◽  
Transition Metal Dichalcogenides ◽  
2D Material ◽  
Physical Mechanisms ◽  
Wide Range ◽  
Fundamental Understanding ◽  
Potential Applications ◽  
Metal Dichalcogenides ◽  
Interfacial Charge

Organic–2D material heterostructures have attracted intensive research interest due to their intriguing properties, with a wide range of potential applications in multifunctional flexible electronic and optoelectronic devices. Central to the realization of such devices is a fundamental understanding of the electronic structures at organic–2D material heterointerfaces. The energy level alignment (ELA) at the interface is of paramount importance because it determines the charge transfer barriers between the two materials in contact. In this paper, we discuss the physical mechanisms determining the ELAs, with special attention on interfacial charge transfer at the heterostructures. We review the current understanding of electronic properties at the heterointerfaces formed by the integration of organics with graphene and 2D transition metal dichalcogenides (TMDs), and conclude with a perspective on the future development of organic–2D material heterostructure.

scholarly journals Swift/XRT, Chandra, and XMM–Newton observations of IGR J17091–3624 as it returns into quiescence

2020 ◽  
Vol 497 (1) ◽  
pp. 1115-1126
Author(s):  
M Pereyra ◽  
D Altamirano ◽  
J M C Court ◽  
N Degenaar ◽  
R Wijnands ◽  
...  
Keyword(s):  
Black Hole ◽  
Neutron Star ◽  
Time Scales ◽  
Strong Evidence ◽  
Spectral Properties ◽  
X Ray ◽  
Term Evolution ◽  
Wide Range ◽  
Low Mass

ABSTRACT IGR J17091–3624 is a low-mass X-ray binary (LMXB), which received wide attention from the community thanks to its similarities with the bright black hole system GRS 1915+105. Both systems exhibit a wide range of highly structured X-ray variability during outburst, with time-scales from few seconds to tens of minutes, which make them unique in the study of mass accretion in LMXBs. In this work, we present a general overview into the long-term evolution of IGR J17091–3624, using Swift/XRT observations from the onset of the 2011–2013 outburst in 2011 February till the end of the last bright outburst in 2016 November. We found four re-flares during the decay of the 2011 outburst, but no similar re-flares appear to be present in the latter one. We studied, in detail, the period with the lowest flux observed in the last 10 yr, just at the tail end of the 2011–2013 outburst, using Chandra and XMM-Newton observations. We observed changes in flux as high as a factor of 10 during this period of relative quiescence, without strong evidence of softening in the spectra. This result suggests that the source has not been observed at its true quiescence so far. By comparing the spectral properties at low luminosities of IGR J17091–3624 and those observed for a well-studied population of LMXBs, we concluded that IGR J17091–3624 is most likely to host a black hole as a compact companion rather than a neutron star.

scholarly journals Excited state dynamics for visible-light sensitization of a photochromic benzil-subsituted phenoxyl-imidazolyl radical

2019 ◽  
Vol 15 ◽  
pp. 2369-2379
Author(s):  
Yoichi Kobayashi ◽  
Yukie Mamiya ◽  
Katsuya Mutoh ◽  
Hikaru Sotome ◽  
Masafumi Koga ◽  
...  
Keyword(s):  
Visible Light ◽  
Rational Design ◽  
Materials Science ◽  
Transient Absorption ◽  
Life Sciences ◽  
Transient Absorption Spectroscopy ◽  
Back Reaction ◽  
Switching Speed ◽  
Wide Range ◽  
Potential Applications

Visible-light sensitized photoswitches have been paid particular attention in the fields of life sciences and materials science because long-wavelength light reduces photodegradation, transmits deep inside of matters, and achieves the selective excitation in condensed systems. Among various photoswitch molecules, the phenoxyl-imidazolyl radical complex (PIC) is a recently developed thermally reversible photochromic molecule whose thermal back reaction can be tuned from tens of nanoseconds to tens of seconds by rational design of the molecular structure. While the wide range of tunability of the switching speed of PIC opened up various potential applications, no photosensitivity to visible light limits its applications. In this study, we synthesized a visible-light sensitized PIC derivative conjugated with a benzil unit. Femtosecond transient absorption spectroscopy revealed that the benzil unit acts as a singlet photosensitizer for PIC by the Dexter-type energy transfer. Visible-light sensitized photochromic reactions of PIC are important for expanding the versatility of potential applications to life sciences and materials science.

Unsteady Flow Structure on a Centrifugal Pump: Experimental and Numerical Approaches

2002 ◽  
Author(s):  
Jose´ Gonza´lez ◽  
Carlos Santolaria ◽  
Eduardo Blanco ◽  
Joaqui´n Ferna´ndez
Keyword(s):  
Numerical Model ◽  
Centrifugal Pump ◽  
Pressure Field ◽  
Pressure Fluctuations ◽  
Side Wall ◽  
Relative Effect ◽  
Pressure Transducers ◽  
Unsteady Pressure ◽  
Blade Passing Frequency ◽  
Wide Range

Both experimental and numerical studies of the unsteady pressure field inside a centrifugal pump have been carried out. The unsteady patterns found for the pressure fluctuations are compared and a further and more detailed flow study from the numerical model developed will be presented in this paper. Measurements were carried out with pressure transducers installed on the volute shroud. At the same time, the unsteady pressure field inside the volute of a centrifugal pump has been numerically modelled using a finite volume commercial code and the dynamic variables obtained have been compared with the experimental data available. In particular, the amplitude of the fluctuating pressure field in the shroud side wall of the volute at the blade passing frequency is successfully captured by the model for a wide range of operating flow rates. Once the developed numerical model has shown its capability in describing the unsteady patterns experimentally measured, an explanation for such patterns is searched. Moreover, the possibilities of the numerical model can be extended to other sections (besides the shroud wall of the volute), which can provide plausible explanations for the dynamic interaction effects between the flow at the impeller exit and the volute tongue at different axial positions. The results of the numerical simulation are focused in the blade passing frequency in order to study the relative effect of the two main phenomena occurring at that frequency for a given position: the blade passing in front of the tongue and the wakes of the blades.

A Remediation Scheme to Global Warming: Engineering Biodegradable Aerosols With Maximum Scattering Potential

2006 ◽  
Author(s):  
Daniel Attinger ◽  
Brendan Green
Keyword(s):  
Particle Size ◽  
Global Warming ◽  
Exploratory Study ◽  
Mie Scattering ◽  
Index Of Refraction ◽  
Numerical Code ◽  
Biodegradable Nanoparticles ◽  
Tiny Amount ◽  
Wide Range ◽  
Scattering Potential

This exploratory study evaluates the following moderation scheme against global warming: deploying nanoparticles in the atmosphere in order to scatter a tiny amount of sunlight (1% or 2W/m2) up to space. Such a strategy could be a last-resort method to counteract unbearable effects of global warming. For particles made of a wide range of known materials, the scattering ability is defined to quantify how efficient the particle is at scattering sunlight. This scattering ability is a function of the particle radius and index of refraction, and is calculated by an in-house numerical code solving the Mie scattering equations. The code is validated against scattering calculations for SO2 particles published by Schwartz[1]. Our calculations show that an optimum particle size exists, which would minimize the amounts to be deployed in the atmosphere. Also, we evaluate the deployment of biodegradable nanoparticles, which would counteract global warming and minimize dangers related to their redeposition.

Computational Study of Flow Resonances and Forces on a Cylinder Vibrating In-Line to a Steady Flow

2010 ◽  
Author(s):  
Lambros Kaiktsis ◽  
George S. Triantafyllou
Keyword(s):  
Oscillation Frequency ◽  
Computational Study ◽  
Oscillation Amplitude ◽  
Excitation Frequency ◽  
Spectral Element ◽  
Flow Dynamics ◽  
Chaotic Flow ◽  
Cylinder Diameter ◽  
Wide Range ◽  
Two Dimensional Flow

We present computational results of the flow dynamics and forces on a circular cylinder oscillating in-line with respect to a steady uniform stream. A wide range of oscillation frequencies is considered, from 0.5fs to 3fs, where fs is the natural Strouhal frequency of the Karman street. The oscillation amplitude is varied up to half the cylinder diameter. The Reynolds number value is 180, corresponding to two-dimensional flow. Simulations utilize a spectral element method. The computed flow states are characterized based on processed lift signals, and flow visualization. We find that the response of the flow is very sensitive to variations of the cylinder oscillation frequency. At low oscillation frequency, the lift signal and vortex patterns remain regular for low oscillation amplitudes, i.e. correspond to a 2S type of vortex street, and become complex at high oscillation amplitudes. Cylinder oscillation at the Strouhal frequency gives a window of chaotic flow at intermediate amplitudes, while at higher amplitudes 2S wakes are generated, with the sub-harmonic fs/2 and the higher harmonic 3fs/2 dominating the lift spectrum. Oscillation at twice the Strouhal frequency results in symmetric shedding, for oscillation amplitudes close to 30% of the cylinder diameter, and higher. Finally, at an oscillation frequency equal to three times the Strouhal frequency, the flow dynamics is very rich, characterized by “islands” of symmetric and asymmetric shedding at increasing oscillation amplitude. Chaotic flow is obtained only when the excitation frequency is equal to fs or to 3fs.

Kinematics of Cytoplasmic Deformation in Neutrophils During Active Motion

1990 ◽  
Vol 112 (3) ◽  
pp. 303-310 ◽  
Author(s):  
S. I. Simon ◽  
G. W. Schmid-Scho¨nbein
Keyword(s):  
Cell Biology ◽  
Random Motion ◽  
Large Strains ◽  
Strain Rates ◽  
Local Motion ◽  
Active Motion ◽  
Whole Cell ◽  
Wide Range ◽  
Freely Suspended ◽  
High Degree

A procedure is proposed to measure the cytoplasmic deformation in active motile neutrophils in the form of cytoplasmic strains and strain rates. Three neighboring microspheres in a local region of the cytoplasm serve as markers for local motion. Their positions are tracked by means of a high resolution light microscope and serve to compute nonlinear measures of strains and strain rates together with the principal strains and principal directions. Active neutrophils exhibit large cytoplasmic strains both during periodic pseudopod projections and during continuous locomotion in a polarized shape. The cytoplasmic motion is often synchronized with the whole cell deformation. The local cytoplasmic strains exceed the strains estimated for the whole cell and are not reversible except in some cases of single pseudopod projections. Large strains are observed both in attached and freely suspended cells. Strain rates are relatively constant but show an increase during the pseudopod retraction phase. Local cytoplasmic strains in neutrophils are inhomogeneous and reach large values during passage of the contraction rings. Neutrophils rendered passive by treatment with cytochalasin or EDTA show a random motion of microspheres with much smaller displacements. These observations suggest that the cytoplasm of active neutrophil exhibits large cytoplasmic strains and strain rates in the absence of an external stress resulting in a high degree of intracellular mixing. The proposed technique may be applied to a wide range of problems in cell biology.

scholarly journals Sorting of Particles Using Inertial Focusing and Laminar Vortex Technology: A Review

Micromachines ◽  
2019 ◽  
Vol 10 (9) ◽  
pp. 594 ◽  
Author(s):  
Annalisa Volpe ◽  
Caterina Gaudiuso ◽  
Antonio Ancona
Keyword(s):  
Particle Sizes ◽  
Label Free ◽  
Comprehensive Overview ◽  
Efficient Manner ◽  
Medical Treatments ◽  
Inertial Focusing ◽  
Physical Mechanisms ◽  
Micro Fluidics ◽  
Wide Range ◽  
Sample Separation

The capability of isolating and sorting specific types of cells is crucial in life science, particularly for the early diagnosis of lethal diseases and monitoring of medical treatments. Among all the micro-fluidics techniques for cell sorting, inertial focusing combined with the laminar vortex technology is a powerful method to isolate cells from flowing samples in an efficient manner. This label-free method does not require any external force to be applied, and allows high throughput and continuous sample separation, thus offering a high filtration efficiency over a wide range of particle sizes. Although rather recent, this technology and its applications are rapidly growing, thanks to the development of new chip designs, the employment of new materials and microfabrication technologies. In this review, a comprehensive overview is provided on the most relevant works which employ inertial focusing and laminar vortex technology to sort particles. After briefly summarizing the other cells sorting techniques, highlighting their limitations, the physical mechanisms involved in particle trapping and sorting are described. Then, the materials and microfabrication methods used to implement this technology on miniaturized devices are illustrated. The most relevant evolution steps in the chips design are discussed, and their performances critically analyzed to suggest future developments of this technology.

Sign in / Sign up

Export Citation Format

Share Document