Photocatalytic CO2 reduction with a quantum efficiency exceeding 60%: time-resolved spectroscopic and X-ray studies on Cu(I) photosensitizers in coordinative interaction with Co(II) phthalocyanine catalysts

The utilization of a fully noble-metal-free system for photocatalytic CO2 reduction remains a fundamental challenge, demanding the precise design of photosensitizers and catalysts, as well as the exploitation of their intermolecular interactions to facilitate electron delivery. Herein, we have implemented triple modulations on catalyst, photosensitizer and coordinative interaction between them for high-performance light-driven CO2 reduction. In this study, heteroleptic copper and cobalt phthalocyanine complexes were selected as photosensitizers and catalysts, respectively. An over ten-fold improvement in light-driven reduction of CO2 to CO is achieved for the catalysts with appending electron-withdrawing substituents for optimal CO-desorption ability. In addition, pyridine substituents were implanted at the backbone of the phenanthroline moiety of the Cu(I) photosensitizers and the effect of their axial coordinative interaction with the catalyst was tested. The combined results of 1H NMR titration experiment, steady-state/transient photoluminescence, and transient absorption spectroscopy confirm the coordinative interaction and reductive quenching pathway in photocatalysis corroboratively. It has been found that the catalytic performances of the coordinatively interacted systems are unexpectedly reverse to those with the pyridine-free Cu(I) photosensitizers. Moreover, the latter system enables a very high quantum efficiency up to 63.5% at 425 nm with a high selectivity exceeding 99% for CO2-to-CO conversion. As determined by time-resolved X-ray absorption spectroscopy and DFT calculation, the replacement of phenyl by pyridyl groups in the Cu(I) photosensitizer favors a stronger flattening and larger torsional angle change of the overall excited state geometry upon photoexcitation, which explains the decreased lifetime of the triplet excited state. Our work promotes the systematic multi-pathway optimizations on the catalyst, photosensitizer and their interactions for advanced CO2 photoreduction.

Regulation of the luminescence mechanism of two-dimensional tin halide perovskites

Two-dimensional (2D) Sn-based perovskites are a kind of non-toxic environment-friendly luminescent material. However, the research on the luminescence mechanism of this type of perovskite is still very controversial, which greatly limits the further improvement and application of the luminescence performance. At present, the focus of controversy is defects and phonon scattering rates. In this work, we combine the organic cation control engineering with temperature-dependent transient absorption spectroscopy to systematically study the interband exciton relaxation pathways in layered A2SnI4 (A = PEA+, BA+, HA+, and OA+) structures. It is revealed that exciton-phonon scattering and exciton-defect scattering have different effects on exciton relaxation. Our study further confirms that the deformation potential scattering by charged defects, not by the non-polar optical phonons, dominates the excitons interband relaxation, which is largely different from the Pb-based perovskites. These results enhance the understanding of the origin of the non-radiative pathway in Sn-based perovskite materials.

Controlled Synthesis of Up-Conversion NaYF4:Yb,Tm Nanoparticles for Drug Release under Near IR-Light Therapy

Up-Conversion materials have received great attention in drug delivery applications in recent years. A specifically emerging field includes the development of strategies focusing on photon processes that promote the development of novel platforms for the efficient transport and the controlled release of drug molecules in the harsh microenvironment. Here, modified reaction time, thermal treatment, and pH conditions were controlled in the synthesis of NaYF4:Yb,Tm up-converted (UC) material to improve its photoluminescence properties. The best blue-emission performance was achieved for the UC3 sample prepared through 24 h-synthesis without thermal treatment at a pH of 5, which promotes the presence of the β-phase and smaller particle size. NaYF4:Yb,Tm has resulted in a highly efficient blue emitter material for light-driven drug release under near-IR wavelength. Thus, NaYF4:Yb,Tm up-converted material promotes the N-O bond cleavage of the oxime ester of Ciprofloxacin (prodrug) as a highly efficient photosensitized drug delivery process. HPLC chromatography and transient absorption spectroscopy measurements were performed to evaluate the drug release conversion rate. UC3 has resulted in a very stable and easily recovered material that can be used in several reaction cycles. This straightforward methodology can be extended to other drugs containing photoactive chromophores and is present as an alternative for drug release systems.

Ultrafast Triplet Generation at the Lead Halide Perovskite/Rubrene Interface

Triplet sensitization of rubrene by bulk lead halide perovskites has recently resulted in efficient infrared-to-visible photon upconversion via triplet-triplet annihilation. Notably, this process occurrs under solar relavant fluxes, potentially paving the way toward integration with photovoltaic devices. In order to further improve the upconversion efficiency, the fundamental photophysical pathways at the perovskite/rubrene interface must be clearly understood to maximize charge extraction. Here, we utilize ultrafast transient absorption spectroscopy to elucidate the processes underlying the triplet generation at the perovskite/rubrene interface. Based on the bleach and photoinduced absorption features of the perovskite and perovskite/rubrene devices obtained at multiple pump wavelengths and fluences, along with their resultant kinetics, our results do not support charge transfer states or long-lived trap states as the underlying mechanism. Instead, the data points towards a triplet sensitization mechanism based on rapid extraction of thermally excited carriers on the picosecond timescale.

Photosynthetic reaction center variants made via genetic code expansion show Tyr at M210 tunes the initial electron transfer mechanism

Photosynthetic reaction centers (RCs) from Rhodobacter sphaeroides were engineered to vary the electronic properties of a key tyrosine (M210) close to an essential electron transfer component via its replacement with site-specific, genetically encoded noncanonical amino acid tyrosine analogs. High fidelity of noncanonical amino acid incorporation was verified with mass spectrometry and X-ray crystallography and demonstrated that RC variants exhibit no significant structural alterations relative to wild type (WT). Ultrafast transient absorption spectroscopy indicates the excited primary electron donor, P*, decays via a ∼4-ps and a ∼20-ps population to produce the charge-separated state P+HA− in all variants. Global analysis indicates that in the ∼4-ps population, P+HA− forms through a two-step process, P*→ P+BA−→ P+HA−, while in the ∼20-ps population, it forms via a one-step P* → P+HA− superexchange mechanism. The percentage of the P* population that decays via the superexchange route varies from ∼25 to ∼45% among variants, while in WT, this percentage is ∼15%. Increases in the P* population that decays via superexchange correlate with increases in the free energy of the P+BA− intermediate caused by a given M210 tyrosine analog. This was experimentally estimated through resonance Stark spectroscopy, redox titrations, and near-infrared absorption measurements. As the most energetically perturbative variant, 3-nitrotyrosine at M210 creates an ∼110-meV increase in the free energy of P+BA− along with a dramatic diminution of the 1,030-nm transient absorption band indicative of P+BA– formation. Collectively, this work indicates the tyrosine at M210 tunes the mechanism of primary electron transfer in the RC.

Photophysics of fused ring electron acceptors for photovoltaic applications

<p>Organic photovoltaic cells (OPVs) have received significant interest over the last decade as they offer the potential of cheap renewable energy via direct photon to electron conversion of abundantly available Sun light. Compared to the inorganic equivalents, they offer lightweight, low-cost, and flexibility advantages. Conventional OPVs are typically based on blends of electron-donor materials and fullerene-based electron-acceptor materials that form bulk-heterojunctions (BHJs). But the attention has recently shifted to organic non-fullerene acceptors especially fused ring electron acceptors (FREAs) owing to their attractive properties including flexible energy levels, tunable band gap, crystallinity, and planarity. Thus the power conversion efficiency (PCE) of OPVs has recently attained a record of 16% by synthesizing FREAs with modified chemical structures. Owing to the high crystallinity and packing orientation of acceptors, FREA based OPV systems are characterized by large and pure phases sized 20-50 nm. This is consistent with the observation that charge generation dynamics in these systems lacked the ultrafast component that characterizes most fullerene blends. To test the hypothesis that the optimal phase size can be large due to facile exciton diffusion in FREAs, a planar indacenodithiophene (IDT) based FREA, IDIC is selected as a model system to study the exciton dynamics. Chapter 3 includes the exciton diffusion measurements in IDIC films using transient absorption spectroscopy which resolves a substantially high, quasi-activationless diffusion coefficient that exceeds that of typical organic semiconductors. The study also includes a deep insight of the key factors behind the enhanced exciton diffusion in IDIC and is shown to arise from different molecular and packing factors which enhance the long-range resonant energy transfer. Rapid exciton diffusion in IDIC films introduced the possibility of solution-processed bilayer devices. Chapter 4 comprises both device and photophysics of planar bilayer devices with a PCE of 11.1% which is readily accounted for the material and device design. By pairing a mid-band gap polymer donor with a range of FREAs, it is shown that the combination of high molecular packing densities and absorption coefficients, long exciton diffusion lengths, and efficient, resonant, long-range energy transfer between donor and acceptor layers enable efficient bilayer devices. By designing new materials with these characteristics, along with orthogonal solubility for layer-by-layer deposition of clean bilayers, it is suggested that the clear connection between material design and function in the bilayer structure will accelerate the development of more efficient organic photovoltaic devices. The molecular packing of active layer components has a crucial role in the device performance of OPV devices. Especially for FREA based OPV systems, the longrange structural order induced by end group 𝜋 - 𝜋 stacking is considered as the critical factor for achieving high PCEs. Chapter 5 includes a deep spectroscopic insight into the exciton and charge transport processes in a series of FREA based OPV systems having different molecular packing and ordering. Here the molecular stacking manipulation in FREAs is achieved by changing the length of alkyl side-chains so that the FREA backbone is changed from a 𝜋 -𝜋 stacking mode to a non-stacking mode. Transient absorption spectroscopic analysis of neat FREAs and blends reveals that exciton diffusion and intermolecular charge transfer processes do not necessarily rely on the molecular 𝜋 -𝜋 stacking, while close atom contact can also enable these processes. This work provides new insights into the design of advanced materials for next generation organic photovoltaics considering diverse transport channels formed by close atom interactions. Chapter 6 discusses the advantages of ternary OPV strategy in BHJ world with a 13% efficient ternary device based on a highly efficient FREA, FOIC. The introduction of a mid-band gap small molecule donor TR into the binary blend PTB7- Th:FOIC improves the open circuit voltage (Voc), short circuit current (Jsc), fill factor (FF), and thereby the overall device performance. Transient absorption spectroscopy reveals ultrafast resonant energy transfer from TR to PTB7-Th domains which is consistent with their intermixed morphology. Additionally, the study also includes the rapid long-range energy transfer from PTB7-Th to FOIC phases that</p>

Photophysics of fused ring electron acceptors for photovoltaic applications

<p>Organic photovoltaic cells (OPVs) have received significant interest over the last decade as they offer the potential of cheap renewable energy via direct photon to electron conversion of abundantly available Sun light. Compared to the inorganic equivalents, they offer lightweight, low-cost, and flexibility advantages. Conventional OPVs are typically based on blends of electron-donor materials and fullerene-based electron-acceptor materials that form bulk-heterojunctions (BHJs). But the attention has recently shifted to organic non-fullerene acceptors especially fused ring electron acceptors (FREAs) owing to their attractive properties including flexible energy levels, tunable band gap, crystallinity, and planarity. Thus the power conversion efficiency (PCE) of OPVs has recently attained a record of 16% by synthesizing FREAs with modified chemical structures. Owing to the high crystallinity and packing orientation of acceptors, FREA based OPV systems are characterized by large and pure phases sized 20-50 nm. This is consistent with the observation that charge generation dynamics in these systems lacked the ultrafast component that characterizes most fullerene blends. To test the hypothesis that the optimal phase size can be large due to facile exciton diffusion in FREAs, a planar indacenodithiophene (IDT) based FREA, IDIC is selected as a model system to study the exciton dynamics. Chapter 3 includes the exciton diffusion measurements in IDIC films using transient absorption spectroscopy which resolves a substantially high, quasi-activationless diffusion coefficient that exceeds that of typical organic semiconductors. The study also includes a deep insight of the key factors behind the enhanced exciton diffusion in IDIC and is shown to arise from different molecular and packing factors which enhance the long-range resonant energy transfer. Rapid exciton diffusion in IDIC films introduced the possibility of solution-processed bilayer devices. Chapter 4 comprises both device and photophysics of planar bilayer devices with a PCE of 11.1% which is readily accounted for the material and device design. By pairing a mid-band gap polymer donor with a range of FREAs, it is shown that the combination of high molecular packing densities and absorption coefficients, long exciton diffusion lengths, and efficient, resonant, long-range energy transfer between donor and acceptor layers enable efficient bilayer devices. By designing new materials with these characteristics, along with orthogonal solubility for layer-by-layer deposition of clean bilayers, it is suggested that the clear connection between material design and function in the bilayer structure will accelerate the development of more efficient organic photovoltaic devices. The molecular packing of active layer components has a crucial role in the device performance of OPV devices. Especially for FREA based OPV systems, the longrange structural order induced by end group 𝜋 - 𝜋 stacking is considered as the critical factor for achieving high PCEs. Chapter 5 includes a deep spectroscopic insight into the exciton and charge transport processes in a series of FREA based OPV systems having different molecular packing and ordering. Here the molecular stacking manipulation in FREAs is achieved by changing the length of alkyl side-chains so that the FREA backbone is changed from a 𝜋 -𝜋 stacking mode to a non-stacking mode. Transient absorption spectroscopic analysis of neat FREAs and blends reveals that exciton diffusion and intermolecular charge transfer processes do not necessarily rely on the molecular 𝜋 -𝜋 stacking, while close atom contact can also enable these processes. This work provides new insights into the design of advanced materials for next generation organic photovoltaics considering diverse transport channels formed by close atom interactions. Chapter 6 discusses the advantages of ternary OPV strategy in BHJ world with a 13% efficient ternary device based on a highly efficient FREA, FOIC. The introduction of a mid-band gap small molecule donor TR into the binary blend PTB7- Th:FOIC improves the open circuit voltage (Voc), short circuit current (Jsc), fill factor (FF), and thereby the overall device performance. Transient absorption spectroscopy reveals ultrafast resonant energy transfer from TR to PTB7-Th domains which is consistent with their intermixed morphology. Additionally, the study also includes the rapid long-range energy transfer from PTB7-Th to FOIC phases that</p>

Tracking excited state decay mechanisms of pyrimidine nucleosides in real time

DNA owes its remarkable photostability to its building blocks—the nucleosides—that efficiently dissipate the energy acquired upon ultraviolet light absorption. The mechanism occurring on a sub-picosecond time scale has been a matter of intense debate. Here we combine sub-30-fs transient absorption spectroscopy experiments with broad spectral coverage and state-of-the-art mixed quantum-classical dynamics with spectral signal simulations to resolve the early steps of the deactivation mechanisms of uridine (Urd) and 5-methyluridine (5mUrd) in aqueous solution. We track the wave packet motion from the Franck-Condon region to the conical intersections (CIs) with the ground state and observe spectral signatures of excited-state vibrational modes. 5mUrd exhibits an order of magnitude longer lifetime with respect to Urd due to the solvent reorganization needed to facilitate bulky methyl group motions leading to the CI. This activates potentially lesion-inducing dynamics such as ring opening. Involvement of the 1nπ* state is found to be negligible.

De Novo Protein Design of Photochemical Reaction Centers

Natural photosynthetic protein complexes capture sunlight to power the energetic catalysis that supports life on Earth. Yet these natural protein structures carry an evolutionary legacy of complexity and fragility that encumbers protein reengineering efforts and obfuscates the underlying design rules for light-driven charge separation. De novo development of a simplified photosynthetic reaction center protein can clarify practical engineering principles needed to build new enzymes for efficient solar-to-fuel energy conversion. Here we report the rational design, X-ray crystal structure, and electron transfer activity of a multi-cofactor protein that incorporates essential elements of photosynthetic reaction centers. This highly stable, modular artificial protein framework can be reconstituted in vitro with interchangeable redox centers for nanometer-scale photochemical charge separation. Transient absorption spectroscopy demonstrates Photosystem II-like tyrosine and metal cluster oxidation, and we measure charge separation lifetimes exceeding 100 ms, ideal for light-activated catalysis. This de novo-designed reaction center builds upon engineering guidelines established for charge separation in earlier synthetic photochemical triads and modified natural proteins, and it shows how synthetic biology may lead to a new generation of genetically encoded, light-powered catalysts for solar fuel production.