scholarly journals H-Darrieus Wind Turbine with Blade Pitch Control

2009 ◽  
Vol 2009 ◽  
pp. 1-7 ◽  
Author(s):  
I. Paraschivoiu ◽  
O. Trifu ◽  
F. Saeed
Keyword(s):  
Wind Turbine ◽  
Pitch Angle ◽  
Vertical Axis ◽  
Circular Path ◽  
Flow Conditions ◽  
Vertical Axis Wind Turbine ◽  
Local Flow ◽  
Operational Conditions ◽  
Pitch Control ◽  
Optimal Variation

A procedure for computing the optimal variation of the blades' pitch angle of an H-Darrieus wind turbine that maximizes its torque at given operational conditions is proposed and presented along with the results obtained on a 7 kW prototype. The CARDAAV code, based on the “Double-Multiple Streamtube” model developed by the first author, is used to determine the performances of the straight-bladed vertical axis wind turbine. This was coupled with a genetic algorithm optimizer. The azimuthal variation of the blades' pitch angle is modeled with an analytical function whose coefficients are used as variables in the optimization process. Two types of variations were considered for the pitch angle: a simple sinusoidal one and one which is more general, relating closely the blades' pitch to the local flow conditions along their circular path. A gain of almost 30% in the annual energy production was obtained with the polynomial optimal pitch control.

Numerical Study of Pitch Angle on H-Type Vertical Axis Wind Turbine

2012 ◽  
Vol 499 ◽  
pp. 259-264
Author(s):  
Qi Yao ◽  
Ying Xue Yao ◽  
Liang Zhou ◽  
S.Y. Zheng
Keyword(s):  
Wind Turbine ◽  
Pitch Angle ◽  
Numerical Study ◽  
Vertical Axis ◽  
Azimuth Angle ◽  
Power Coefficient ◽  
Cfd Model ◽  
Vertical Axis Wind Turbine ◽  
Sliding Mesh ◽  
Mesh Technique

This paper presents a simulation study of an H-type vertical axis wind turbine. Two dimensional CFD model using sliding mesh technique was generated to help understand aerodynamics performance of this wind turbine. The effect of the pith angle on H-type vertical axis wind turbine was studied based on the computational model. As a result, this wind turbine could get the maximum power coefficient when pitch angle adjusted to a suited angle, furthermore, the effects of pitch angle and azimuth angle on single blade were investigated. The results will provide theoretical supports on study of variable pitch of wind turbine.

Coupled Dynamics of a Vertical Axis Wind Turbine (VAWT) With Active Blade Pitch Control on a Semi-Submersible Floater

2018 ◽  
Author(s):  
Ebert Vlasveld ◽  
Fons Huijs ◽  
Feike Savenije ◽  
Benoît Paillard
Keyword(s):  
Wind Turbine ◽  
Wind Velocity ◽  
Vertical Axis ◽  
Power Production ◽  
Mooring Line ◽  
Vertical Axis Wind Turbine ◽  
Coupled Dynamics ◽  
Low Frequencies ◽  
Pitch Control ◽  
Thrust And Torque

A vertical axis wind turbine (VAWT) typically has a low position of the center of gravity and a large allowable tilt angle, which could allow for a relatively small floating support structure. Normally however, the drawback of large loads on the VAWT rotor during parked survival conditions limits the extent to which the floater size can be reduced. If active blade pitch control is applied to the VAWT, this drawback can be mitigated and the benefits can be fully utilized. The coupled dynamics of a 6 MW VAWT with active blade pitch control supported by a GustoMSC Tri-Floater semi-submersible floater have been simulated using coupled aero-hydro-servo-elastic software. The applied blade pitch control during power production results in a steady-state thrust curve which is more comparable to a HAWT, with the maximum thrust occurring at rated wind velocity. During power production, floater motions occur predominantly at low frequencies. These low frequency motions are caused by variations in the wind velocity and consequently the rotor thrust and torque. For the parked survival condition, it is illustrated that active blade pitch control can be used to effectively reduce dynamic load variations on the rotor and minimize floater motions and mooring line tensions.

scholarly journals Kinematics of a vertical axis wind turbine with a variable pitch angle

2018 ◽  
Author(s):  
Mateusz Jakubowski ◽  
Roman Starosta ◽  
Pawel Fritzkowski
Keyword(s):  
Wind Turbine ◽  
Pitch Angle ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Variable Pitch

Two-Dimensional Computational Fluid Dynamics Study on the Performance of Twin Vertical Axis Wind Turbine With Deflector

2020 ◽  
Vol 142 (8) ◽  
Author(s):  
Yichen Jiang ◽  
Peidong Zhao ◽  
Li Zou ◽  
Zhi Zong ◽  
Kun Wang
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Turbine ◽  
Cfd Simulation ◽  
Vertical Axis ◽  
Energy Utilization ◽  
Offshore Wind ◽  
Two Dimensional ◽  
Vertical Axis Wind Turbine ◽  
Local Flow

Abstract The offshore wind industry is undergoing a rapid development due to its advantage over the onshore wind farm. The vertical axis wind turbine (VAWT) is deemed to be potential in offshore wind energy utilization. A design of the offshore vertical axis wind turbine with a deflector is proposed and studied in this paper. Two-dimensional computational fluid dynamics (CFD) simulation is employed to investigate the aerodynamic performance of wind turbine. An effective method of obtaining the blade’s angle of attack (AoA) is introduced in CFD simulation to help analyze the blade aerodynamic torque variation. The numerical simulations are validated against the measured torque and wake velocity, and the results show a good agreement with the experiment. It is found that the blade instantaneous torque is correlated with the local AoA. Among the three deflector configurations, the front deflector leads to favorable local flow for the blade, which is responsible for the improved performance.

scholarly journals Experimental investigation of a variable geometry vertical axis wind turbine

2020 ◽  
pp. 0309524X2093513
Author(s):  
Simon A Prince ◽  
Carmine Badalamenti ◽  
Dimitar Georgiev
Keyword(s):  
Experimental Study ◽  
Wind Turbine ◽  
Pitch Angle ◽  
Vertical Axis ◽  
Reynolds Numbers ◽  
Variable Geometry ◽  
Vertical Axis Wind Turbine ◽  
Wind Tunnel Experiments ◽  
Electrical Generator ◽  
Turbine Design

An experimental study is presented on the performance of a vertical axis wind turbine with variable blade geometry of the design developed by Austin Farrah. This is experimentally compared with the performance of a correspondingly sized Bach-type Savonius turbine using the same electrical generator and measurement instrumentation in a wind tunnel. Experiments were performed for Reynolds numbers, based on blade chord, in the range 5 × 103 to 1 × 105, and for blade settings between −40° and +40o. The study shows that for the tip speed ratios that have been investigated, the Farrah vertical axis wind turbine design can only marginally outperform a corresponding two-bladed Bach-type Savonius turbine and then only when its blades are set to 40° pitch angle. The presence of a small inner cylinder, which rotates with the turbine, does not enhance its performance due to the fact that it is immersed in an extensive column of relatively static air.

Design and Test of a Vertical-Axis Wind Turbine with Pitch Control

2012 ◽  
Vol 225 ◽  
pp. 338-343 ◽  
Author(s):  
J.J. Miau ◽  
S.Y. Liang ◽  
R.M. Yu ◽  
C.C. Hu ◽  
T.S. Leu ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Aerodynamic Characteristics ◽  
Vertical Axis Wind Turbine ◽  
Variable Pitch ◽  
Pitch Control ◽  
Remarkable Improvement ◽  
The One ◽  
Variable Pitch Control ◽  
Starting Torque

The concept of pitch control has been implemented in the design of a small vertical-axis wind turbine. Benefits gained can be shown by the experimental and numerical results presented in this paper. As found, the method of variable pitch control outperforms the one of fixed pitch control. The present results show that the former can make remarkable improvement on the starting torque as well as the aerodynamic characteristics at low tip speed ratios.

Numerical Simulation of the Aerodynamic Performance of a H-Type Wind Turbine during Self-Starting

2014 ◽  
Vol 529 ◽  
pp. 296-302 ◽  
Author(s):  
Wei Zuo ◽  
Shun Kang
Keyword(s):  
Flow Field ◽  
Wind Turbine ◽  
Pitch Angle ◽  
Turbulence Modeling ◽  
Vertical Axis ◽  
Aerodynamic Performance ◽  
Time Dependent ◽  
Two Dimensional ◽  
Vertical Axis Wind Turbine ◽  
Sst Turbulence Model

The aerodynamic performance and the bypass flow field of a vertical axis wind turbine under self-starting are investigated using CFD simulations in this paper. The influence of pitch angle variations on the performance of the wind turbine during self-starting is presented. A two-dimensional model of the wind turbine with three blades is employed. A commercial software FlowVision is employed in this paper, which uses dynamic Cartesian grid. The SST turbulence model is used for turbulence modeling, which assumes the flow full turbulent. Based on the comparison between the computed time-dependent variations of the rotation speed with the experimental data, the time-dependent variations of the torque are presented. The characteristics of self-starting of the wind turbine are analyzed with the pitch angle of 0o、-2oand 2o. The influence of pitch angle variations on two-dimensional unsteady viscous flow field through velocity contours is discussed in detail.

The Straight-Bladed Morphing Vertical Axis Wind Turbine

2016 ◽  
Author(s):  
David MacPhee ◽  
Asfaw Beyene
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Low Cost ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Pitch Control ◽  
Control Schemes ◽  
Horizontal Axis Wind Turbines ◽  
Novel Concept

Blade pitch control has been extremely important for the development of Horizontal-Axis Wind Turbines (HAWTs), allowing for greater efficiency over a wider range of operational regimes when compared to rigid-bladed designs. For Vertical-Axis Wind Turbines (VAWTs), blade pitching is inherently more difficult due to a dependence of attack angle on turbine armature location, shaft speed, and wind speed. As a result, there have been very few practical pitch control schemes put forward for VAWTs, which may be a major reason why this wind turbine type enjoys a much lower market share as compared to HAWTs. To alleviate this issue, the flexible, straight-bladed vertical-axis turbine is presented, which can passively adapt its geometry to local aerodynamic loadings and serves as a low-cost blade pitch control strategy increasing efficiency and startup capabilities. Using two-dimensional fluid-structure action simulations, this novel concept is compared to an identical rigid one and is proven to be superior in terms of power coefficient due to decreased torque minima. Moreover, due to the flexible nature of the blades, the morphing turbine achieves less severe oscillatory loadings. As a result, the morphing blade design is expected to not only increase efficiency but also system longevity without additional system costs usually associated with active pitch control schemes.

Application of Variable Blade Pitch Control on Improving the Performance of Vertical Axis Wind Turbine

2012 ◽  
Vol 229-231 ◽  
pp. 2339-2342
Author(s):  
J.C. Cheng ◽  
S.J Su ◽  
J.J Miau
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Aerodynamic Characteristics ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Energy Capture ◽  
Pitch Control ◽  
Tip Speed Ratio ◽  
Torque Coefficient ◽  
Variable Pitch Control

A three blades vertical axis wind turbine simulation is performed to study the unsteady aerodynamic characteristics with blade pitch control. Several fixed and variable blade pitch models under different tip speed ratio are adopted to improve performance of the wind turbine. Results show that an appropriate pitch control model can effectively decrease the range of negative torque regime to reduce the vibration of the wind turbine. Besides, the average torque coefficient as well as the energy capture efficiency can be also improved, especially for the lower tip speed ratio. The overall efficiency of the wind turbines in power generation will be enhanced. For the cases under the tip speed ratio between 1 and 3, the efficiency can be enhanced 243% and 486% for fixed and variable pitch control models respectively as comparing with non-pitch control cases.

Sign in / Sign up

Export Citation Format

Share Document