scholarly journals Electrodes for Microfluidic Integrated Optoelectronic Tweezers

2011 ◽  
Vol 2011 ◽  
pp. 1-10 ◽  
Author(s):  
Kuo-Wei Huang ◽  
Sabbir Sattar ◽  
Jiang F. Zhong ◽  
Cheng-Hsu Chou ◽  
Hsiung-Kuang Tsai ◽  
...  
Keyword(s):  
Thin Film ◽  
Electrical Conductivity ◽  
Small Deformation ◽  
Oxygen Plasma Treatment ◽  
Electrically Conductive ◽  
Single Walled Carbon Nanotube ◽  
Optoelectronic Tweezers ◽  
Biochemical Analyses ◽  
On Chip ◽  
First Time

We report on two types of electrodes that enable the integration of optoelectronic tweezers (OETs) with multilayer poly(dimethylsilane)- (PDMS-) based microfluidic devices. Both types of electrodes, Au-mesh and single-walled carbon nanotube- (SWNT-) embedded PDMS thin film, are optically transparent, electrically conductive, and can be mechanically deformed and provide interfaces to form strong covalent bonding between an OET device and PDMS through standard oxygen plasma treatment. Au-mesh electrodes provide high electrical conductivity and high transparency but are lack of flexibility and allow only small deformation. On the other hand, SWNT-embedded PDMS thin film electrodes provide not only electrical conductivity but also optical transparency and can undergo large mechanical deformation repeatedly without failure. This enables, for the first time, microfluidic integrated OET with on-chip valve and pump functions, which is a critical step for OET-based platforms to conduct more complex and multistep biological and biochemical analyses.

Electrically conductive composites via infiltration of single-walled carbon nanotube-based aerogels

2010 ◽  
Vol 1258 ◽  
Author(s):  
Marcus A Worsley ◽  
Joshua D. Kuntz ◽  
Sergei Kucheyev ◽  
Alex V Hamza ◽  
Joe H Satcher ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Carbon Nanotube ◽  
Composite Materials ◽  
Low Density ◽  
Electrically Conductive ◽  
Single Walled Carbon Nanotube ◽  
Insulating Materials ◽  
Conductive Composites ◽  
Electrical Conductivities

AbstractMany challenges remain in the effort to realize the exceptional properties of carbon nanotubes (CNT) in composite materials. Here, we report on electrically conductive composites fabricated via infiltration of CNT-based aerogels. The ultra low-density, high conductivity, and extraordinary robustness of the CNT aerogels make them ideal scaffolds around which to create conductive composites. Infiltrating the aerogels with various insulating materials (e.g. epoxy and silica) resulted in composites with electrical conductivities over 1 Scm-1 with as little as 1 vol% nanotube content. The electrical conductivity observed in the composites was remarkably close to that of the CNT scaffold in all cases.

Fouling Is the Beginning: Upcycling Biopolymer-Fouled Substrates for Fabricating High-Permeance Thin-Film Composite Polyamide Membranes

2020 ◽  
Author(s):  
Ruobin Dai ◽  
Hongyi Han ◽  
Tianlin Wang ◽  
Jiayi Li ◽  
Chuyang Y. Tang ◽  
...  
Keyword(s):  
Thin Film ◽  
High Pressure ◽  
End Of Life ◽  
Water Purification ◽  
Low Pressure ◽  
Polymeric Membranes ◽  
Membrane Recycling ◽  
Film Composite ◽  
Thin Film Composite ◽  
First Time

Commercial polymeric membranes are generally recognized to have low sustainability as membranes need to be replaced and abandoned after reaching the end of their life. At present, only techniques for downcycling end-of-life high-pressure membranes are available. For the first time, this study paves the way for upcycling fouled/end-of-life low-pressure membranes to fabricate new high-pressure membranes for water purification, forming a closed eco-loop of membrane recycling with significantly improved sustainability.

Electrical Conductivity Manipulation and Switching Phenomena of Poly(p-Phenylenebenzobisthiazole) Thin Film by Doping Process

2010 ◽  
Author(s):  
Jiahua Zhu ◽  
Thomas C. Ho ◽  
Zhanhu Guo ◽  
Suying Wei ◽  
Sung Park ◽  
...  
Keyword(s):  
Thin Film ◽  
Electrical Conductivity

Polypyrrole/PU hybrid hydrogels: electrically conductive and fast self-healing for the potential application in body-monitor sensor

2021 ◽  
Author(s):  
Zhanyu Jia ◽  
Guangyao Li ◽  
Juan Wang ◽  
shouhua Su ◽  
Jie Wen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Potential Application ◽  
Self Healing ◽  
Electrically Conductive ◽  
Sensor Application ◽  
Hybrid Hydrogels ◽  
Health Monitor

Conductivity, self-healing and moderate mechanical properties are necessary for multifunctional hydrogels which have great potential in health-monitor sensor application. However, the combination of electrical conductivity, self-healing and good mechanical properties...

scholarly journals Electrically Conductive Networks from Hybrids of Carbon Nanotubes and Graphene Created by Laser Radiation

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1875
Author(s):  
Alexander Yu. Gerasimenko ◽  
Artem V. Kuksin ◽  
Yury P. Shaman ◽  
Evgeny P. Kitsyuk ◽  
Yulia O. Fedorova ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Laser Irradiation ◽  
Flexible Electronics ◽  
Threshold Energy ◽  
Wavelength Region ◽  
Hybrid Nanostructures ◽  
Graphene Sheets ◽  
Electrically Conductive ◽  
Walled Carbon Nanotubes

A technology for the formation of electrically conductive nanostructures from single-walled carbon nanotubes (SWCNT), multi-walled carbon nanotubes (MWCNT), and their hybrids with reduced graphene oxide (rGO) on Si substrate has been developed. Under the action of single pulses of laser irradiation, nanowelding of SWCNT and MWCNT nanotubes with graphene sheets was obtained. Dependences of electromagnetic wave absorption by films of short and long nanotubes with subnanometer and nanometer diameters on wavelength are calculated. It was determined from dependences that absorption maxima of various types of nanotubes are in the wavelength region of about 266 nm. It was found that contact between nanotube and graphene was formed in time up to 400 fs. Formation of networks of SWCNT/MWCNT and their hybrids with rGO at threshold energy densities of 0.3/0.5 J/cm2 is shown. With an increase in energy density above the threshold value, formation of amorphous carbon nanoinclusions on the surface of nanotubes was demonstrated. For all films, except the MWCNT film, an increase in defectiveness after laser irradiation was obtained, which is associated with appearance of C–C bonds with neighboring nanotubes or graphene sheets. CNTs played the role of bridges connecting graphene sheets. Laser-synthesized hybrid nanostructures demonstrated the highest hardness compared to pure nanotubes. Maximum hardness (52.7 GPa) was obtained for MWCNT/rGO topology. Regularity of an increase in electrical conductivity of nanostructures after laser irradiation has been established for films made of all nanomaterials. Hybrid structures of nanotubes and graphene sheets have the highest electrical conductivity compared to networks of pure nanotubes. Maximum electrical conductivity was obtained for MWCNT/rGO hybrid structure (~22.6 kS/m). Networks of nanotubes and CNT/rGO hybrids can be used to form strong electrically conductive interconnections in nanoelectronics, as well as to create components for flexible electronics and bioelectronics, including intelligent wearable devices (IWDs).

scholarly journals Multi-material braids for multifunctional laminates: conductive through-thickness reinforcement

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Caroline O’Keeffe ◽  
Laura Rhian Pickard ◽  
Juan Cao ◽  
Giuliano Allegri ◽  
Ivana K. Partridge ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Carbon Fibre ◽  
Electromagnetic Interference ◽  
Design Tool ◽  
Electrically Conductive ◽  
Current Collection ◽  
Wide Range ◽  
Predictive Design ◽  
The Right ◽  
Metal Wires

AbstractConventional carbon fibre laminates are known to be moderately electrically conductive in-plane, but have a poor through-thickness conductivity. This poses a problem for functionality aspects that are of increasing importance to industry, such as sensing, current collection, inductive/resistive heating, electromagnetic interference (EMI) shielding, etc. This restriction is of course more pronounced for non-conductive composite reinforcements such as glass, organic or natural fibres. Among various solutions to boost through-thickness electrical conductivity, tufting with hybrid micro-braided metal-carbon fibre yarns is one of the most promising. As a well-characterised method of through thickness reinforcement, tufting is easily implementable in a manufacturing environment. The hybridisation of materials in the braid promotes the resilience and integrity of yarns, while integrating metal wires opens up a wide range of multifunctional applications. Many configurations can be produced by varying braid patterns and the constituting yarns/wires. A predictive design tool is therefore necessary to select the right material configuration for the desired functional and structural performance. This paper suggests a fast and robust method for generating finite-element models of the braids, validates the prediction of micro-architecture and electrical conductivity, and demonstrates successful manufacturing of composites enhanced with braided tufts.

scholarly journals Supramolecular structures of terbium(iii) porphyrin double-decker complexes on a single-walled carbon nanotube surface

RSC Advances ◽  
2019 ◽  
Vol 9 (48) ◽  
pp. 28135-28145
Author(s):  
Ahmed I. A. Abd El-Mageed ◽  
Takuji Ogawa
Keyword(s):  
Carbon Nanotubes ◽  
Scanning Probe Microscopy ◽  
Single Walled Carbon Nanotubes ◽  
Supramolecular Structures ◽  
Scanning Probe ◽  
Single Walled Carbon Nanotube ◽  
Single Walled Carbon ◽  
Double Decker ◽  
Walled Carbon Nanotubes ◽  
First Time

For the first time, using scanning probe microscopy, the supramolecular structures of terbium porphyrin double-decker complexes were observed on single-walled carbon nanotubes surfaces, where the molecules formed a well-ordered self-assembled array.

Single-walled carbon nanotube network/poly composite thin film for flow sensor

2010 ◽  
Vol 16 (6) ◽  
pp. 955-959 ◽  
Author(s):  
Hui Cao ◽  
Zhiyin Gan ◽  
Qiang Lv ◽  
Han Yan ◽  
Xiaobin Luo ◽  
...  
Keyword(s):  
Thin Film ◽  
Carbon Nanotube ◽  
Composite Thin Film ◽  
Flow Sensor ◽  
Single Walled Carbon Nanotube ◽  
Single Walled Carbon ◽  
Carbon Nanotube Network

Investigate of Electrical Conductivity of Shape-Memory Polymer Filled with Carbon Black

2008 ◽  
Vol 47-50 ◽  
pp. 714-717 ◽  
Author(s):  
Xin Lan ◽  
Jin Song Leng ◽  
Yan Ju Liu ◽  
Shan Yi Du
Keyword(s):  
Electrical Conductivity ◽  
Carbon Black ◽  
Shape Memory ◽  
Shape Recovery ◽  
Volume Fraction ◽  
Shape Memory Polymer ◽  
Recovery Process ◽  
Thermomechanical Properties ◽  
Electrically Conductive ◽  
New System

A new system of thermoset styrene-based shape-memory polymer (SMP) filled with carbon black (CB) is investigated. To realize the electroactive stimuli of SMP, the electrical conductivity of SMP filled with various amounts of CB is characterized. The percolation threshold of electrically conductive SMP filled with CB is about 3% (volume fraction of CB), which is much lower than many other electrically conductive polymers. When applying a voltage of 30V, the shape recovery process of SMP/CB(10 vol%) can be realized in about 100s. In addition, the thermomechanical properties are also characterized by differential scanning calorimetery (DSC).

Sign in / Sign up

Export Citation Format

Share Document