scholarly journals Surface Effects on the Vibration and Buckling of Double-Nanobeam-Systems

2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
Dong-Hui Wang ◽  
Gang-Feng Wang

Surface effects on the transverse vibration and axial buckling of double-nanobeam-system (DNBS) are examined based on a refined Euler-Bernoulli beam model. For three typical deformation modes of DNBS, we derive the natural frequency and critical axial load accounting for both surface elasticity and residual surface tension, respectively. It is found that surface effects get quite important when the cross-sectional size of beams shrinks to nanometers. No matter for vibration or axial buckling, surface effects are just the same in three deformation modes and usually enhance the natural frequency and critical load. However, the interaction between beams is clearly distinct in different deformation modes. This study might be helpful for the design of nano-optomechanical systems and nanoelectromechanical systems.

2015 ◽  
Vol 82 (9) ◽  
Author(s):  
X. Chen ◽  
S. A. Meguid

In this paper, we investigate the asymmetric bifurcation behavior of an initially curved nanobeam accounting for Lorentz and electrostatic forces. The beam model was developed in the framework of Euler–Bernoulli beam theory, and the surface effects at the nanoscale were taken into account in the model by including the surface elasticity and the residual surface tension. Based on the Galerkin decomposition method, the model was simplified as two degrees of freedom reduced order model, from which the symmetry breaking criterion was derived. The results of our work reveal the significant surface effects on the symmetry breaking criterion for the considered nanobeam.


2016 ◽  
Vol 33 (3) ◽  
pp. 323-329 ◽  
Author(s):  
S.-S. Zhou ◽  
S.-J. Zhou ◽  
A.-Q. Li ◽  
B.-L. Wang

AbstractResonant micro-biochemical sensors play important roles in a wide range of emerging applications to detect biochemical molecules. As the resonators of micro-biochemical sensors, the vibration characteristics of circular sensor diaphragms are important for the design of diaphragm-based resonant micro-biochemical sensors. In this paper, the influence of residual stresses on the vibration of a circular sensor diaphragm with surface effects is analyzed. Based on the Kirchhoff's plate theory and surface elasticity theory, the governing equation is presented. The material characteristic lengths for different surface effects are obtained. The influences of residual stresses on the effective flexural rigidity and natural frequency of the diaphragm with surface effects are discussed. Results show that the influence of residual stresses on the effective flexural rigidity becomes obvious with the increasing of residual stresses. The first order natural frequency increases rapidly when the tension parameter is larger than 30 for the stiffened surfaces, while for the softened surfaces the value is 10. Moreover, surface effects can influence the transition range of diaphragm from the plate behavior to membrane behavior in terms of the tension parameter. The transition range can be enlarged by the stiffened surface and be shortened by the softened surface. The analysis and results are helpful for the design of sensor diaphragm-based resonant micro-biochemical sensors and some related researches.


Author(s):  
Hassen M. Ouakad ◽  
Mohammad I. Younis

This paper presents an investigation into the nonlinear dynamics of a carbon nanotube (CNT) actuated electrically by a DC force and an AC harmonic load. The CNT is described by an Euler Bernoulli beam model that accounts for the system nonlinearities due to mid-plane stretching and electrostatic forcing. A reduced-order model based on the Galerkin method is developed and utilized to simulate the static and dynamic response of the CNT. The static deflection of the CNT and its pull-in voltage are calculated and validated by comparing them to published results. It was found that mid-plane stretching has a major impact on the pull-in prediction of CNT. Dynamic analysis is conducted to explore the nonlinear oscillation of the CNT near its fundamental natural frequency (primary resonance) and near one half, twice, and three times its natural frequency (secondary resonances). The nonlinear analysis is carried out using a shooting technique combined with the Floquet theory to capture periodic orbits and analyze their stability. The results show that these resonances can lead to complex nonlinear dynamics phenomena such as hysteresis, dynamic pull-in, hardening and softening behaviors, and frequencies bands with an inevitable escape from a potential well.


Author(s):  
Ali Fallah ◽  
Keikhosrow Firoozbakhsh ◽  
Mohammad Hossein Kahrobaiyan ◽  
Abdolreza Pasharavesh

In this paper, simple analytical expressions are presented for geometrically non-linear vibration analysis of thin nanobeams with both simply supported and clamped boundary conditions. Gurtin-Murdoch surface elasticity together with Euler-Bernoulli beam theory is used to obtain the governing equations of motions of the nanobeam with surface effects consideration. The governing nonlinear partial differential equation is reduced to a single nonlinear ordinary differential equation using Galerkin technique. He’s variational approach is employed to obtain analytical solution for the resulted nonlinear governing equation. The effects of different parameters such as vibration amplitude, boundary conditions, and beam dimensions on the natural frequencies of nanobeams are investigated and results are presented for future studies.


2018 ◽  
Vol 26 (1) ◽  
pp. 125-139
Author(s):  
Ghiocel Groza ◽  
Ana-Maria Mitu ◽  
Nicolae Pop ◽  
Tudor Sireteanu

Abstract The paper is based on the analytical and experimental results from [14], [15] and reveals, by mathematical methods, the degradation of ma- terial stifiness due to the decrease of the first natural frequency, when the driving frequency is slightly lower than the first natural frequency of the undegradated structure. By considering the vibration of the uni- form slender cantilever beam as an oscillating system with degrading hysteretic behavior the following equation is considered subjected to the boundary conditions To approximate the solution of the this problem, we use the method of Newton interpolating series (see [6]) and the Taylor series method (see [8]).


2011 ◽  
Vol 110-116 ◽  
pp. 1036-1043
Author(s):  
Jian Ming Bryan Ma ◽  
Samuel F. Asokanthan ◽  
Li Ying Jiang

New techniques that can control Casimir forces in nanosacle structures may soon ensure the physical realization of switchable Casimir-force devices. In order to provide useful insights into the behaviour of this class of switches, the idea of Casimir-force actuation window has been proposed here to assist in the design of such switches. The influence of surface effects including residual surface stress and surface elasticity on the pull-in parameters of Casimir actuated switches has been demonstrated. These effects, together with other currently known difficulties due to uncertainties such as surface roughness and trapped electric charge may hinder the realization of this class of devices. An Euler-Bernoulli beam model has been employed to demonstrate surface effects in a nanocantilever switch, and numerical solutions employing a finite difference approach have been obtained for the static bending of this switch. The results demonstrate that surface effects play a significant role in the selection of basic design parameters of Casimir actuated switches, such as static deflection and detachment length. Threshold value of residual surface stress is also studied for these switches. The predictions reveal that exclusion of surface effects in Casimir-force actuation window may result in non-functional switch designs.


2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Farzad Ebrahimi ◽  
Mohsen Daman

To investigate the surface effects on thermomechanical vibration and buckling of embedded circular curved nanosize beams, nonlocal elasticity model is used in combination with surface properties including surface elasticity, surface tension, and surface density for modeling the nanoscale effect. The governing equations are determined via the energy method. Analytically Navier method is utilized to solve the governing equations for simply supported nanobeam at both ends. Solving these equations enables us to estimate the natural frequency and critical buckling load for circular curved nanobeam including Winkler and Pasternak elastic foundations and under the effect of a uniform temperature change. The results determined are verified by comparing the results with available ones in literature. The effects of various parameters such as nonlocal parameter, surface properties, Winkler and Pasternak elastic foundations, temperature, and opening angle of circular curved nanobeam on the natural frequency and critical buckling load are successfully studied. The results reveal that the natural frequency and critical buckling load of circular curved nanobeam are significantly influenced by these effects.


2019 ◽  
Vol 18 (03n04) ◽  
pp. 1940030 ◽  
Author(s):  
A. I. Efimova ◽  
E. A. Lipkova ◽  
K. A. Gonchar ◽  
A. A. Eliseev ◽  
V. Yu. Timoshenko

Free charge carrier concentration in arrays of silicon nanowires (SiNWs) with cross-sectional size of the order of 100[Formula: see text]nm was quantitatively studied by means of the infrared spectroscopy in an attenuated total reflection mode. SiNWs were formed on lightly-doped [Formula: see text]-type crystalline silicon substrates by metal-assisted chemical etching followed by additional doping through thermoactivated diffusion of boron at 900–1000∘C. The latter process was found to increase the concentration of free holes in SiNWs up to [Formula: see text][Formula: see text]cm[Formula: see text]. Potential applications of highly doped SiNWs in thermoelectric energy converters and infrared plasmonic devices are discussed.


Mathematics ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 898
Author(s):  
Michaela Bobková ◽  
Lukáš Pospíšil

We are interested in a contact problem for a thin fixed beam with an internal point obstacle with possible rotation and shift depending on a given swivel and sliding friction. This problem belongs to the most basic practical problems in, for instance, the contact mechanics in the sustainable building construction design. The analysis and the practical solution plays a crucial role in the process and cannot be ignored. In this paper, we consider the classical Euler–Bernoulli beam model, which we formulate, analyze, and numerically solve. The objective function of the corresponding optimization problem for finding the coefficients in the finite element basis combines a quadratic function and an additional non-differentiable part with absolute values representing the influence of considered friction. We present two basic algorithms for the solution: the regularized primal solution, where the non-differentiable part is approximated, and the dual formulation. We discuss the disadvantages of the methods on the solution of the academic benchmarks.


2002 ◽  
Vol 205 (15) ◽  
pp. 2183-2188 ◽  
Author(s):  
M. A. Connaughton ◽  
M. L. Fine ◽  
M. H. Taylor

SUMMARYThe influence of temperature, size and season on the sounds produced by the sonic muscles of the weakfish Cynoscion regalis are categorized and used to formulate a hypothesis about the mechanism of sound generation by the sonic muscle and swimbladder. Sounds produced by male weakfish occur at the time and location of spawning and have been observed in courtship in captivity. Each call includes a series of 6-10 sound pulses, and each pulse expresses a damped, 2-3 cycle acoustic waveform generated by single simultaneous twitches of the bilateral sonic muscles. The sonic muscles triple in mass during the spawning season, and this hypertrophy is initiated by rising testosterone levels that trigger increases in myofibrillar and sarcoplasmic cross-sectional area of sonic muscle fibers. In response to increasing temperature, sound pressure level (SPL), dominant frequency and repetition rate increase, and pulse duration decreases. Likewise, SPL and pulse duration increase and dominant frequency decreases with fish size. Changes in acoustic parameters with fish size suggest the possibility that drumming sounds act as an `honest' signal of male fitness during courtship. These parameters also correlate with seasonally increasing sonic muscle mass. We hypothesize that sonic muscle twitch duration rather than the resonant frequency of the swimbladder determines dominant frequency. The brief (3.5 ms), rapidly decaying acoustic pulses reflect a low-Q, broadly tuned resonator, suggesting that dominant frequency is determined by the forced response of the swimbladder to sonic muscle contractions. The changing dominant frequency with temperature in fish of the same size further suggests that frequency is not determined by the natural frequency of the bladder because temperature is unlikely to affect resonance. Finally, dominant frequency correlates with pulse duration (reflecting muscle twitch duration),and the inverse of the period of the second cycle of acoustic energy approximates the recorded frequency. This paper demonstrates for the first time that the dominant frequency of a fish sound produced by a single muscle twitch is apparently determined by the velocity of the muscle twitch rather than the natural frequency of the swimbladder.


Sign in / Sign up

Export Citation Format

Share Document