scholarly journals Effect of Polymers (PEG and PVP) on Sol-Gel Synthesis of Microsized Zinc Oxide

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Thilagavathi Thirugnanam
Keyword(s):  
Sol Gel ◽  
Cost Effective ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structural Modifications ◽  
Phase Pure ◽  
Sol Gel Synthesis ◽  
Polyethylene Glycol 6000 ◽  
Granular Morphology ◽  
Scanning Electron

Fibers irregular and seed-like microcrystalline ZnO were synthesized by using a cost-effective and low temperature aqueous sol-gel method. Various polymers, namely, polyethylene glycol 6000 (PEG 6000) and polyvinyl pyrrolidone (PVP), were used as structure directing agents. The samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The X-ray diffraction pattern revealed the formation of phase-pure ZnO micropowders. It is observed that the polymers play an important role in modifying the surface morphology and the size of the crystallites. A compact granular morphology is observed for the ZnO samples without polymer. The samples exhibit microparticles of size 100 nm for PVP and for PEG-mediated growth, whereas microporous corrugated morphology is observed for added PEG-mediated micropowder. FTIR study is used to confirm the structural modifications occurring in the polymers.

Morphology and Phase Composition of Sol-Gel Derived Aluminum Borate Nanowhiskers

2015 ◽  
Vol 659 ◽  
pp. 121-126 ◽  
Author(s):  
Pat Sooksaen
Keyword(s):  
Fourier Transform ◽  
Phase Composition ◽  
Sol Gel ◽  
Molar Ratio ◽  
Aluminum Borate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Higher Temperature ◽  
Sol Gel Synthesis ◽  
Scanning Electron

Aluminium borate nanowhiskers with varying aspect ratio were synthesized via sol–gel synthesis. The morphology of aluminum borate (Al4B2O9 and Al18B4O33) nanowhiskers could be controlled by varying the aluminum to boron (Al:B) molar ratio in the sol–gel derived precursors. Sintering temperatures (850 and 1100°C) and sintering times (4 and 32 hours) also affected the phase composition and size of the nanowhiskers. Citric acid was also added in the sol–gel derived precursors as a surface stabilizer for obtaining uniform finely dispersed nanostructures. Fine nanowhiskers were obtained by the calcination at 850°C, whereas higher temperature of 1100°C led to thicker and longer nanowhiskers and became rod-like crystals. The morphology and phase composition were investigated by field emission scanning electron microscope and X-ray diffraction. Chemical bond vibrations in the synthesized nanowhiskers were investigated by Fourier-transform infrared spectroscopy.

scholarly journals Influence of type of precursors on the sol-gel synthesis of the LaCoO3 nanoparticles

2014 ◽  
Vol 22 (1) ◽  
pp. 1-12 ◽  
Author(s):  
Nicoleta Cornei ◽  
Simona Feraru ◽  
Ion Bulimestru ◽  
Andrei Victor Sandu ◽  
Carmen Mita
Keyword(s):  
Crystal Structure ◽  
Sol Gel ◽  
Chelating Agent ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sol Gel Synthesis ◽  
Perovskite Type ◽  
Type Crystal ◽  
Scanning Electron

Abstract Perovskite-type LaCoO3 was prepared by sol-gel method using nitrates / chlorides as precursors and citric acid as chelating agent. Chemical composition was obtained by means of EDX method. The structures of sintered samples were investigated by scanning electron microscopy (SEM), IR and XRD analysis. The results of X-ray diffraction indicated that the LaCoO3nanopowders obtained using nitrate as precursors had a rhombohedral perovskite-type crystal structure (S. G: R-3c), while that obtained using chloride as precursors had a mixture of LaCoO3, LaOCl and Co3O4. The all lanthanum cobaltites exhibit catalytic activity on the decomposition of hydrogen peroxide, ascribed to their higher surface and Co3+ concentration

Sol-gel synthesis of microcrystalline rare earth orthophosphates

1996 ◽  
Vol 11 (3) ◽  
pp. 639-649 ◽  
Author(s):  
Yan Guo ◽  
Patricia Woznicki ◽  
Aaron Barkatt ◽  
Elie E. Saad ◽  
Inna G. Talmy
Keyword(s):  
Rare Earth ◽  
Gamma Rays ◽  
Sol Gel ◽  
Index Of Refraction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Aqueous Environments ◽  
Rare Earth Salts ◽  
Sol Gel Synthesis ◽  
Scanning Electron

Studies of the reactions between rare earth salts and phosphoric acid in aqueous or ethanolic media have shown that in both cases stable gels can be formed. Upon drying, gels prepared in aqueous environments yield macrocrystalline REPO4 products similar to those produced by conventional precipitation and drying. Gels prepared in ethanol, on the other hand, undergo dehydration to form dense microcrystalline products. This observation is based on optical and scanning electron microscopy, as well as on x-ray diffraction studies and infrared spectroscopy. These techniques, as well as differential thermal analysis, indicate that crystal growth of these products takes place around 600−700 °C. The composition of the dehydrated gels produced in both the aqueous and ethanolic systems corresponds to an orthophosphate structure. Other characteristics of the microcrystalline REPO4 products include high resistance to attack by water, absence of coloration upon exposure to gamma rays, and a high index of refraction.

PENGGUNAAN TiO2 PARTIKEL NANO HASIL SINTESIS BERBASIS AIR MENGGUNAKAN METODA SOL-GEL PADA BAHAN KAPAS SEBAGAI APLIKASI UNTUK TEKSTIL ANTI UV

Arena Tekstil ◽  
2013 ◽  
Vol 28 (1) ◽  
Author(s):  
Maya Komalasari ◽  
Bambang Sunendar
Keyword(s):  
Fourier Transform ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Sol Gel ◽  
Crosslinking Agent ◽  
X Ray Diffraction ◽  
Nano Tio2 ◽  
X Ray ◽  
Infra Red ◽  
Scanning Electron

Partikel nano TiO2 berbasis air dengan pH basa telah berhasil disintesis dengan menggunakan metode sol-gel dan diimobilisasi pada kain kapas dengan menggunakan kitosan sebagai zat pengikat silang. Sintesis dilakukan  dengan prekursor TiCl4 pada konsentrasi 0,3 M, 0,5 M dan 1 M, dan menggunakan templat kanji dengan proses kalsinasi pada suhu 500˚C selama 2 jam. Partikel nano TiO2 diaplikasikan ke kain kapas dengan metoda pad-dry-cure dan menggunakan kitosan sebagai crosslinking agent. Berdasarkan hasil Scanning Electron Microscope (SEM),diketahui bahwa morfologi partikel TiO2 berbentuk spherical dengan ukuran nano (kurang dari 100 nm). Karakterisasi X-Ray Diffraction (XRD) menunjukkan adanya tiga tipe struktur kristal utama, yaitu (100), (101) dan (102) dengan fasa kristal yang terbentuk adalah anatase dan rutile. Pada karakterisasi menggunakan SEM terhadap serbuk dari TiO2 yang telah diaplikasikan ke permukaan kain kapas, terlihat adanya imobilisasi partikel nano TiO2 melalui ikatan hidrogen silang dengan kitosan pada kain kapas. Hasil analisa tersebut kemudian dikonfirmasi dengan FTIR (Fourier Transform Infra Red) yang hasilnya memperlihatkan puncak serapan pada bilangan gelombang 3495 cm-1, 2546 cm-1, dan 511 cm-1,  yang masing-masing diasumsikan sebagai adanya vibrasi gugus fungsi O-H, N-H dan Ti-O-Ti. Hasil SEM menunjukkan pula bahwa kristal nano yang terbentuk diantaranya adalah fasa rutile , yang berdasarkan literatur terbukti dapatberfungsi sebagai anti UV.

scholarly journals Structural and optical properties of SnO2–Al2O3 nanocomposite synthesized via sol-gel route

2015 ◽  
Vol 33 (4) ◽  
pp. 714-718 ◽  
Author(s):  
Neeraj K. Mishra ◽  
Chaitnaya Kumar ◽  
Amit Kumar ◽  
Manish Kumar ◽  
Pratibha Chaudhary ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Optical Properties ◽  
Sol Gel ◽  
Physical Interaction ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Sensing Applications ◽  
Scanning Electron

AbstractA nanocomposite of 0.5SnO2–0.5Al2O3 has been synthesized using a sol-gel route. Structural and optical properties of the nanocomposite have been discussed in detail. Powder X-ray diffraction and scanning electron microscopy with energy-dispersive X-ray diffraction spectroscopy confirm the phase purity and the particle size of the 0.5SnO2–0.5Al2O3 nanocomposite (13 to 15 nm). The scanning electron microscopy also confirms the porosity in the sample, useful in sensing applications. The FT-IR analysis confirms the presence of physical interaction between SnO2 and Al2O3 due to the slight shifting and broadening of characteristic bands. The UV-Vis analysis confirms the semiconducting nature because of direct transition of electrons into the 0.5SnO2–0.5Al2O3 nanocomposites.

A Novel Hydroxyapatite Carrier for Enrichment of Hydrocarbon Degradation Bacteria

2007 ◽  
Vol 336-338 ◽  
pp. 1914-1917
Author(s):  
Lei Yang ◽  
Zhen Yi Zhang ◽  
Xiao Shan Ning ◽  
Guang He Li
Keyword(s):  
Activated Carbon ◽  
Sol Gel ◽  
Hydrocarbon Degradation ◽  
Potential Candidate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Bacterial Enrichment ◽  
Bet Method ◽  
The One ◽  
Scanning Electron

In this paper, a novel and highly efficient hydroxyapatite (HA) carrier for cultivating hydrocarbon degradation bacteria (HDB) is introduced. The HA particles synthesized through a sol-gel method and different heat treatments were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and BET method. The microbial amount and activities of HDB cultivated on HA carriers were quantitatively investigated in order to assess their enriching capabilities. The results showed that HA synthesized at 550°C and the one without calcination could enrich HDB 3 and 2 magnitude orders more than the activated carbon, respectively. Mechanisms of bacterial enrichment on HA and activated carbon were also studied, and it is believed that the high bioactivity and the surface morphology of HA were responsible for the efficient reproduction of HDB. It is concluded that HA is a potential candidate to replace the conventionally used activated carbon as a novel carrier applied in the filed of bioremediation for oil contaminated soil.

Study on optical and magnetic properties of FexNi1-xMn2O4 materials

2021 ◽  
Vol 66 (1) ◽  
pp. 57-64
Author(s):  
Hang Pham Vu Bich ◽  
Yen Nguyen Hai ◽  
Mai Phung Thi Thanh ◽  
Dung Dang Duc ◽  
Hung Nguyen Manh ◽  
...  
Keyword(s):  
Single Phase ◽  
Sol Gel ◽  
Vibrating Sample Magnetometer ◽  
Raman Scattering Spectrum ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scattering Spectrum ◽  
Diffraction Diagram ◽  
Optical And Magnetic Properties ◽  
Scanning Electron

In this study, we present the process of synthesis FexNi1-xMn2O4 (x = 0; 0.1; 0.3; 0.5; 0.7; 0.9; 1) by method sol-gel. Scanning electron microscope results shows that the particle size is about 50 nm. The X-ray diffraction diagram shows that the samples are single phase, changing structure clearly as the x ratio increases from 0 to 1. The lattice constant, the bond length also changes with x-value as shown on the Raman scattering spectrum. The results of the vibrating sample magnetometer show that the magnetism of the material FexNi1-xMn2O4 changes with the value of x and reaches a maximum in the range x from 0.5 to 0.7.

Preparation of Borosilicate Xerogel and Research on its Mineralization

2012 ◽  
Vol 476-478 ◽  
pp. 2059-2062
Author(s):  
Chen Wang ◽  
Ya Dong Li ◽  
Gu Qiao Ding
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Ph Value ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Compositional Changes ◽  
Scanning Electron

Tributyl borate was first adopted for the introduction of boron in the preparation of bioactive borosilicate xerogel by sol-gel method. The xerogel reacted continuously in 0.25M K2HPO4 solution with a starting pH value of 7.0 at 37 °C for 1day. The structural, morphologies and compositional changes resulting from the conversion were characterized using X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectroscopy. The results indicated that speed of formation of HA was cut way back on the time with the addition of boron and the induction period for the HA nucleation on the surface of the borosilicate xerogel was short than 1 days. The conversion mechanism of the borosilicate xerogels to hydroxyapaptite was also discussed.

High Curie temperature perovskite BiInO3–PbTiO3 ceramics

2004 ◽  
Vol 19 (7) ◽  
pp. 2185-2193 ◽  
Author(s):  
Runrun Duan ◽  
Robert F. Speyer ◽  
Edward Alberta ◽  
Thomas R. Shrout
Keyword(s):  
Curie Temperature ◽  
Sol Gel ◽  
High Curie Temperature ◽  
Dielectric Measurements ◽  
X Ray Diffraction ◽  
Compound Formation ◽  
X Ray ◽  
Oxide Powders ◽  
Phase Pure ◽  
Pbtio3 Ceramics

The extent of BiInO3 substitution in the perovskite system xBiInO3–(1 - x)PbTiO3 and the corresponding raise in the Curie temperature were investigated using thermal analysis, dielectric measurements, x-ray diffraction, and electron microscopy. Maximum tetragonal perovskite distortion (c/a = 1.082) was obtained for x = 0.20, with a corresponding Curie temperature of 582 °C. Phase-pure tetragonal perovskite was obtained for x ⩽ 0.25. Compound formation after calcining mixed oxide powders resulted in agglomerated cube-shaped tetragonal perovskite particles, which could be fired to 94.7% of theoretical density (TD). Sol-gel fabrication resulted in nano-sized tetragonal or pseudo-cubic perovskite particles, which after two-step firing, resulted in a tetragonal perovskite microstructure at as high as (x = 0.20) 98.1% of TD.

Sign in / Sign up

Export Citation Format

Share Document