scholarly journals A Novel Reconfigurable MB-OFDM UWB LNA Using Programmable Current Reuse

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Ahmed Ragheb ◽  
Ghazal Fahmy ◽  
Iman Ashour ◽  
Abdel Hady Ammar
Keyword(s):  
Orthogonal Frequency Division Multiplexing ◽  
Cmos Technology ◽  
Low Noise ◽  
Ultra Wideband ◽  
Current Reuse ◽  
Input Matching ◽  
Common Gate ◽  
Programmable Circuit ◽  
Noise Amplifier ◽  
Mode 3

This paper presents a design of a reconfigurable low noise amplifier (LNA) for multiband orthogonal frequency division multiplexing (MB-OFDM) ultra wideband (UWB) receivers. The proposed design is divided into three stages; the first one is a common gate (CG) topology to provide the input matching over a wideband. The second stage is a programmable circuit to control the mode of operation. The third stage is a current reuse topology to improve the gain, flatness and consume lower power. The proposed LNA is designed using 0.18 μm CMOS technology. This LNA has been designed to operate in two subbands of MB-OFDM UWB, UWB mode-1 and mode-3, as a single or concurrent mode. The simulation results exhibit the power gain up to 17.35, 18, and 11 dB for mode-1, mode-3, and concurrent mode, respectively. The NF is 3.5, 3.9, and 6.5 and the input return loss is better than −12, −13.57, and −11 dB over mode-1, mode-3, and concurrent mode, respectively. This design consumes 4 mW supplied from 1.2 V.

scholarly journals Low Noise Amplifier with Improved Gain and Reduced Noise-Figure in 90nm CMOS Technology

2021 ◽  
pp. 85-94
Author(s):  
Dr. Rashmi S B ◽  
Mr. Raghavendra B ◽  
Mr. Sanketh V
Keyword(s):  
Reflection Coefficient ◽  
Noise Figure ◽  
Cmos Technology ◽  
Low Noise ◽  
Low Noise Amplifier ◽  
Ultra Wideband ◽  
Common Source ◽  
Frequency Range ◽  
Common Gate ◽  
Noise Amplifier

A CMOS low noise amplifier (LNA) for ultra-wideband (UWB) wireless applications is presented in this paper. The proposed CMOS low noise amplifier (LNA) is designed using common-gate (CG) topology as the first stage to achieve ultra-wideband input matching. The common-gate (CG) is cascaded with common- source (CS) topology with current-reused configuration to enhance the gain and noise figure (NF) performance of the LNA with low power. The Buffer stage is used as output matching network to improve the reflection coefficient. The proposed low noise amplifier (LNA) is implemented using CADENCE Virtuoso Analog and Digital Design Environment tool in 90nm CMOS technology. The LNA provides a forward voltage gain or power gain (S21) of 32.34dB , a minimum noise figure of 2dB, a reverse-isolation (S12) of less than - 38.74dB and an output reflection coefficient (S22) of less than -7.4dB for the entire ultra-wideband frequency range. The proposed LNA has an input reflection coefficient (S11) of less than -10dB for the ultra-wideband frequency range. It achieves input referred 1-dB compression point of 78.53dBm and input referred 3-dB compression point of 13dBm. It consumes only 24.226mW of power from a Vdd supply of 0.7V.

Design of 3.1-10.6GHz CMOS LNA Based on Input Matching Technique of Common-Gate Topology

2013 ◽  
Vol 479-480 ◽  
pp. 1014-1017
Author(s):  
Yi Cheng Chang ◽  
Meng Ting Hsu ◽  
Yu Chang Hsieh
Keyword(s):  
Noise Figure ◽  
Supply Voltage ◽  
Average Power ◽  
Wide Band ◽  
Low Noise ◽  
Input Matching ◽  
Common Gate ◽  
Cmos Lna ◽  
Noise Amplifier ◽  
Is Design

In this study, three stage ultra-wide-band CMOS low-noise amplifier (LNA) is presented. The UWB LNA is design in 0.18μm TSMC CMOS technique. The LNA input and output return loss are both less than-10dB, and achieved 10dB of average power gain, the minimum noise figure is 6.55dB, IIP3 is about-9.5dBm. It consumes 11mW from a 1.0-V supply voltage.

scholarly journals A 0.18um CMOS Low Noise Amplifier for 3-5ghz UWB Receivers

2018 ◽  
Vol 7 (3.6) ◽  
pp. 84
Author(s):  
N Malika Begum ◽  
W Yasmeen
Keyword(s):  
Power Supply ◽  
Noise Figure ◽  
Cmos Technology ◽  
Low Noise ◽  
Low Noise Amplifier ◽  
Ultra Wideband ◽  
Noise Amplifier ◽  
5 Ghz ◽  
Chebyshev Filter ◽  
Minimum Noise

This paper presents an Ultra-Wideband (UWB) 3-5 GHz Low Noise Amplifier (LNA) employing Chebyshev filter. The LNA has been designed using Cadence 0.18um CMOS technology. Proposed LNA achieves a minimum noise figure of 2.2dB, power gain of 9dB.The power consumption is 6.3mW from 1.8V power supply.  

scholarly journals A 2.4 GHz low noise amplifier design at 130nm CMOS technology using common gate topology for WiFi / WiMAX application

2017 ◽  
Vol 7 (1.3) ◽  
pp. 69
Author(s):  
M. Ramana Reddy ◽  
N.S Murthy Sharma ◽  
P. Chandra Sekhar
Keyword(s):  
Noise Figure ◽  
Cmos Technology ◽  
Low Noise ◽  
Low Noise Amplifier ◽  
Low Power Consumption ◽  
Common Gate ◽  
Chip Size ◽  
Overall Performance ◽  
Amplifier Design ◽  
Noise Amplifier

The proposed work shows an innovative designing in TSMC 130nm CMOS technology. A 2.4 GHz common gate topology low noise amplifier (LNA) using an active inductor to attain the low power consumption and to get the small chip size in layout design. By using this Common gate topology achieves the noise figure of 4dB, Forward gain (S21) parameter of 14.7dB, and the small chip size of 0.26 mm, while 0.8mW power consuming from a 1.1V in 130nm CMOS gives the better noise figure and improved the overall performance.

scholarly journals CMOS Ultra-Wideband Low Noise Amplifier Design

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
K. Yousef ◽  
H. Jia ◽  
R. Pokharel ◽  
A. Allam ◽  
M. Ragab ◽  
...  
Keyword(s):  
Impedance Matching ◽  
Cmos Technology ◽  
Low Noise ◽  
Low Noise Amplifier ◽  
Ultra Wideband ◽  
Output Impedance ◽  
Integrated Inductor ◽  
Technology Process ◽  
Amplifier Design ◽  
Noise Amplifier

This paper presents the design of ultra-wideband low noise amplifier (UWB LNA). The proposed UWB LNA whose bandwidth extends from 2.5 GHz to 16 GHz is designed using a symmetric 3D RF integrated inductor. This UWB LNA has a gain of 11 ± 1.0 dB and a NF less than 3.3 dB. Good input and output impedance matching and good isolation are achieved over the operating frequency band. The proposed UWB LNA is driven from a 1.8 V supply. The UWB LNA is designed and simulated in standard TSMC 0.18 µm CMOS technology process.

Inductive Feedback Technique for Design of High Gain 0.18μm CMOS LNA for 5G Applications

2021 ◽  
pp. 2150236
Author(s):  
Anjana Jyothi Banu ◽  
G. Kavya ◽  
D. Jahnavi
Keyword(s):  
Reflection Coefficient ◽  
Noise Figure ◽  
Cmos Technology ◽  
High Gain ◽  
Low Noise ◽  
Common Source ◽  
Matching Network ◽  
Input Matching ◽  
Cmos Lna ◽  
Noise Amplifier

A 26[Formula: see text]GHz low-noise amplifier (LNA) designed for 5G applications using 0.18[Formula: see text][Formula: see text]m CMOS technology is proposed in this paper. The circuit includes a common-source in the first stage to suppress the noise in the amplifier. The successive stage has a Cascode topology along with an inductive feedback to improve the power gain. The input matching network is designed to achieve the input reflection coefficient less than [Formula: see text]7dB at the intended frequency. The matching network at the output is designed using inductor–capacitor (LC) components connected in parallel to attain the output reflection coefficient of [Formula: see text]10[Formula: see text]dB. Due to the inductor added in feedback at the second stage. The [Formula: see text] obtained is 18.208[Formula: see text]dB at 26[Formula: see text]GHz with a noise figure (NF) of 2.8[Formula: see text]dB. The power supply given to the LNA is 1.8[Formula: see text]V. The simulation and layout of the presented circuit are performed using Cadence Virtuoso software.

A 5–7 GHz current reuse and gm-boosted common gate low noise amplifier with LC based ESD protection in 32 nm CMOS

2016 ◽  
Vol 90 (3) ◽  
pp. 573-589 ◽  
Author(s):  
Sriharsha Ankathi ◽  
Sriramula Vignan ◽  
Srikanth Athukuri ◽  
Smrithi Mohan ◽  
Karthigha Balamurugan ◽  
...  
Keyword(s):  
Low Noise ◽  
Low Noise Amplifier ◽  
Current Reuse ◽  
Esd Protection ◽  
Common Gate ◽  
Noise Amplifier
Sign in / Sign up

Export Citation Format

Share Document