scholarly journals Effects of Controller and Nonuniform Temperature Profile on the Onset of Rayleigh-Bénard-Marangoni Electroconvection in a Micropolar Fluid

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
H. M. Azmi ◽  
R. Idris

Linear stability analysis is performed to study the effects of nonuniform basic temperature gradients on the onset of Rayleigh-Bénard-Marangoni electroconvection in a dielectric Eringen’s micropolar fluid by using the Galerkin technique. In the case of Rayleigh-Bénard-Marangoni convection, the eigenvalues are obtained for an upper free/adiabatic and lower rigid/isothermal boundaries. The influence of various parameters has been analysed. Three nonuniform basic temperature profiles are considered and their comparative influence on onset of convection is discussed. Different values of feedback control and electric number are added up to examine whether their presence will enhance or delay the onset of electroconvection.

2015 ◽  
Vol 14 (3) ◽  
pp. 23-42 ◽  
Author(s):  
S Pranesh ◽  
Tarannum Sameena ◽  
Baby Riya

The effect of Suction – injection combination on the onset of Rayleigh – Bénard electroconvection micropolar fluid is investigated by making a linear stability analysis. The Rayleigh-Ritz technique is used to obtain the eigenvalues for different velocity and temperature boundary combinations. The influence of various parameters on the onset of convection has been analysed. It is found that the effect of Prandtl number on the stability of the system is dependent on the SIC being pro-gravity or anti-gravity. A similar Pe-sensitivity is found in respect of the critical wave number. It is observed that the fluid layer with suspended particles heated from below is more stable compared to the classical fluid layer without suspended particles.


2009 ◽  
Vol 2009 ◽  
pp. 1-11 ◽  
Author(s):  
M. N. Mahmud ◽  
R. Idris ◽  
I. Hashim

The combined effects of a uniform vertical magnetic field and a nonuniform basic temperature profile on the onset of steady Marangoni convection in a horizontal layer of micropolar fluid are studied. The closed-form expression for the Marangoni numberMfor the onset of convection, valid for polynomial-type basic temperature profiles upto a third order, is obtained by the use of the single-term Galerkin technique. The critical conditions for the onset of convection have been presented graphically.


2011 ◽  
Vol 10 (2) ◽  
pp. 1-10
Author(s):  
S.P. Suma ◽  
Y.H. Gangadharaiah

The effect of non-uniform basic temperature gradient on the onset of Marangoni convection in a horizontal layer with a free-slip bottom heated from below and cooled from above is considered. A linear stability analysis is performed to undertake a detail investigation. The eigenvalues are obtained for lower rigid isothermal and upper free adiabatic boundaries. The resulting eigenvalue problem is solved exactly and single-term Galerkin expansion procedure. The influence of various parameters on the onset of convection has been analyzed. Three non-uniform basic temperature profiles are considered and the results obtained from both the methods are compared and are found to be in good agreement. Some general conclusions about their destabilizing effects are presented.


2015 ◽  
Vol 14 (3) ◽  
pp. 1-22
Author(s):  
R V Kiran ◽  
Attluri Kalyani

The effect of non-uniform temperature gradient on the onset of Rayleigh-Bénard-Marangoni- Magneto-convection in a Micropolar fluid with Maxwell-Cattaneo law is studied using the Galerkin technique. The eigen value is obtained for rigid-free velocity boundary combination with isothermal and adiabatic condition on the spin-vanishing boundaries. A linear stability analysis is performed. The influence of various parameters on the onset of convection has been analyzed. One linear and five non-linear temperature profiles are considered and their comparative influence on onset is discussed. The classical approach predicts an infinite speed for the propagation of heat.  The present non-classical theory involves a wave type heat transport (Second Sound) and does not suffer from the physically unacceptable drawback of infinite heat propagation speed.


1980 ◽  
Vol 96 (2) ◽  
pp. 375-393 ◽  
Author(s):  
R. Mckibbin ◽  
M. J. O'Sullivan

The formalism required to determine the criterion for the onset of convection in a multi-layered porous medium heated from below is developed using a straightforward linear stability analysis. Detailed results for two- and three-layer configurations are presented. These results show that large permeability differences between the layers are required to force the system into an onset mode different from a homogeneous system.


2013 ◽  
Vol 736 ◽  
pp. 464-494 ◽  
Author(s):  
P. Pearce ◽  
J. Daou

AbstractWe investigate the Rayleigh–Bénard convection problem within the context of a diffusion flame formed in a horizontal channel where the fuel and oxidizer concentrations are prescribed at the porous walls. This problem seems to have received no attention in the literature. When formulated in the low-Mach-number approximation the model depends on two main non-dimensional parameters, the Rayleigh number and the Damköhler number, which govern gravitational strength and reaction speed respectively. In the steady state the system admits a planar diffusion flame solution; the aim is to find the critical Rayleigh number at which this solution becomes unstable to infinitesimal perturbations. In the Boussinesq approximation, a linear stability analysis reduces the system to a matrix equation with a solution comparable to that of the well-studied non-reactive case of Rayleigh–Bénard convection with a hot lower boundary. The planar Burke–Schumann diffusion flame, which has been previously considered unconditionally stable in studies disregarding gravity, is shown to become unstable when the Rayleigh number exceeds a critical value. A numerical treatment is performed to test the effects of compressibility and finite chemistry on the stability of the system. For weak values of the thermal expansion coefficient $\alpha $, the numerical results show strong agreement with those of the linear stability analysis. It is found that as $\alpha $ increases to a more realistic value the system becomes considerably more stable, and also exhibits hysteresis at the onset of instability. Finally, a reduction in the Damköhler number is found to decrease the stability of the system.


2017 ◽  
Vol 817 ◽  
pp. 264-305 ◽  
Author(s):  
Thierry Alboussière ◽  
Yanick Ricard

The linear stability threshold of the Rayleigh–Bénard configuration is analysed with compressible effects taken into account. It is assumed that the fluid under investigation obeys a Newtonian rheology and Fourier’s law of thermal transport with constant, uniform (dynamic) viscosity and thermal conductivity in a uniform gravity field. Top and bottom boundaries are maintained at different constant temperatures and we consider here mechanical boundary conditions of zero tangential stress and impermeable walls. Under these conditions, and with the Boussinesq approximation, Rayleigh (Phil. Mag., vol. 32 (192), 1916, pp. 529–546) first obtained analytically the critical value $27\unicode[STIX]{x03C0}^{4}/4$ for a dimensionless parameter, now known as the Rayleigh number, at the onset of convection. This paper describes the changes of the critical Rayleigh number due to the compressibility of the fluid, measured by the dimensionless dissipation parameter ${\mathcal{D}}$ and due to a finite temperature difference between the hot and cold boundaries, measured by a dimensionless temperature gradient $a$. Different equations of state are examined: ideal gas equation, Murnaghan’s model (often used to describe the interiors of solid but convective planets) and a generic equation of state with adjustable parameters, which can represent any possible equation of state. In the perspective to assess approximations often made in convective models, we also consider two variations of this stability analysis. In a so-called quasi-Boussinesq model, we consider that density perturbations are solely due to temperature perturbations. In a so-called quasi-anelastic liquid approximation model, we consider that entropy perturbations are solely due to temperature perturbations. In addition to the numerical Chebyshev-based stability analysis, an analytical approximation is obtained when temperature fluctuations are written as a combination of only two modes, one being the original symmetrical (between top and bottom) mode introduced by Rayleigh, the other one being antisymmetrical. The analytical solution allows us to show that the antisymmetrical part of the critical eigenmode increases linearly with the parameters $a$ and ${\mathcal{D}}$, while the superadiabatic critical Rayleigh number departs quadratically in $a$ and ${\mathcal{D}}$ from $27\unicode[STIX]{x03C0}^{4}/4$. For any arbitrary equation of state, the coefficients of the quadratic departure are determined analytically from the coefficients of the expansion of density up to degree three in terms of pressure and temperature.


Sign in / Sign up

Export Citation Format

Share Document