scholarly journals Layer-by-Layer Self-Assembled Ferrite Multilayer Nanofilms for Microwave Absorption

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Jiwoong Heo ◽  
Daheui Choi ◽  
Jinkee Hong
Keyword(s):  
Electron Microscopy ◽  
Self Assembly ◽  
Precursor Solution ◽  
Ferrite Nanoparticles ◽  
Energy Dispersive ◽  
Layer By Layer ◽  
X Ray Diffraction ◽  
Simple Method ◽  
X Ray ◽  
Scanning Electron

We demonstrate a simple method for fabricating multilayer thin films containing ferrite (Co0.5Zn0.5Fe2O4) nanoparticles, using layer-by-layer (LbL) self-assembly. These films have microwave absorbing properties for possible radar absorbing and stealth applications. To demonstrate incorporation of inorganic ferrite nanoparticles into an electrostatic-interaction-based LbL self-assembly, we fabricated two types of films: (1) a blended three-component LbL film consisting of a sequential poly(acrylic acid)/oleic acid-ferrite blend layer and a poly(allylamine hydrochloride) layer and (2) a tetralayer LbL film consisting of sequential poly(diallyldimethylammonium chloride), poly(sodium-4-sulfonate), bPEI-ferrite, and poly(sodium-4-sulfonate) layers. We compared surface morphologies, thicknesses, and packing density of the two types of ferrite multilayer film. Ferrite nanoparticles (Co0.5Zn0.5Fe2O4) were prepared via a coprecipitation method from an aqueous precursor solution. The structure and composition of the ferrite nanoparticles were characterized by X-ray diffraction, energy dispersive X-ray spectroscopy, transmission electron microscopy, and scanning electron microscopy. X-ray diffraction patterns of ferrite nanoparticles indicated a cubic spinel structure, and energy dispersive X-ray spectroscopy revealed their composition. Thickness growth and surface morphology were measured using a profilometer, atomic force microscope, and scanning electron microscope.

Structural Characterization of Gallbladder Stones Using Energy Dispersive X-ray Spectroscopy and X-ray Diffraction

2018 ◽  
Vol 21 (7) ◽  
pp. 495-500 ◽  
Author(s):  
Hassan A. Almarshad ◽  
Sayed M. Badawy ◽  
Abdalkarem F. Alsharari
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Energy Dispersive ◽  
Spectroscopic Techniques ◽  
X Ray Diffraction ◽  
Major Health Problem ◽  
X Ray ◽  
Gallbladder Stones ◽  
Pure Cholesterol ◽  
Scanning Electron

Aim and Objective: Formation of the gallbladder stones is a common disease and a major health problem. The present study aimed to identify the structures of the most common types of gallbladder stones using X-ray spectroscopic techniques, which provide information about the process of stone formation. Material and Method: Phase and elemental compositions of pure cholesterol and mixed gallstones removed from gallbladders of patients were studied using energy-dispersive X-ray spectroscopy combined with scanning electron microscopy analysis and X-ray diffraction. Results: The crystal structures of gallstones which coincide with standard patterns were confirmed by X-ray diffraction. Plate-like cholesterol crystals with laminar shaped and thin layered structures were clearly observed for gallstone of pure cholesterol by scanning electron microscopy; it also revealed different morphologies from mixed cholesterol stones. Elemental analysis of pure cholesterol and mixed gallstones using energy-dispersive X-ray spectroscopy confirmed the different formation processes of the different types of gallstones. Conclusion: The method of fast and reliable X-ray spectroscopic techniques has numerous advantages over the traditional chemical analysis and other analytical techniques. The results also revealed that the X-ray spectroscopy technique is a promising technique that can aid in understanding the pathogenesis of gallstone disease.

Effect of TiC on coarsening and macrosegregation of Al–Bi alloys

2020 ◽  
Vol 111 (7) ◽  
pp. 607-615
Author(s):  
Congmin Li ◽  
Yanguo Yin ◽  
Ming Xu ◽  
Jianfeng Cheng ◽  
Lan Shen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Heterogeneous Nucleation ◽  
Self Assembly ◽  
Holding Time ◽  
Energy Dispersive ◽  
Melt Temperature ◽  
X Ray ◽  
Minority Phase ◽  
Scanning Electron

Abstract The microstructures of an Al-Bi immiscible alloy and the corresponding composites containing TiC (1 wt.% and 2 wt.%) were explored for melt temperatures of 800 °C, 850 °C, and 900°C. It was demonstrated that serious coarsening and macrosegregation of Bi-rich minority phase particles occurred, which was slightly alleviated by increasing the melt temperature from 800 °C to 900 °C. By adding TiC particles, the coarsening and macrosegregation of Bi-rich minority phase particles were significantly impeded. Scanning electron microscopy and energy-dispersive X-ray spectroscopy revealed that TiC particles were located inside and on the surface of Bi-rich minority phase particles, exhibiting heterogeneous nucleation and self-assembly behaviour. By properly increasing the holding time of the melt, finer and more uniform Bi-rich minority phase particles were obtained.

scholarly journals Improving the reactivity of phenylacetylene macrocycles toward topochemical polymerization by side chains modification

2014 ◽  
Vol 10 ◽  
pp. 1613-1619 ◽  
Author(s):  
Simon Rondeau-Gagné ◽  
Jules Roméo Néabo ◽  
Maxime Daigle ◽  
Katy Cantin ◽  
Jean-François Morin
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Raman Spectroscopy ◽  
Self Assembly ◽  
Significant Enhancement ◽  
Side Chains ◽  
X Ray Diffraction ◽  
X Ray ◽  
Topochemical Polymerization ◽  
Scanning Electron

The synthesis and self-assembly of two new phenylacetylene macrocycle (PAM) organogelators were performed. Polar 2-hydroxyethoxy side chains were incorporated in the inner part of the macrocycles to modify the assembly mode in the gel state. With this modification, it was possible to increase the reactivity of the macrocycles in the xerogel state to form polydiacetylenes (PDAs), leading to a significant enhancement of the polymerization yields. The organogels and the PDAs were characterized using Raman spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM).

scholarly journals The Characteristics of Padamarang Magnesite under Calcination and Hydrothermal Treatment

2019 ◽  
Vol 29 (2) ◽  
Author(s):  
Mutia Dewi Yuniati ◽  
Feronika Cinthya Mawarni Putri Wawuru ◽  
Anggoro Tri Mursito ◽  
Iwan Setiawan ◽  
Lediyantje Lintjewas
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Fourier Transform Infrared Spectroscopy ◽  
Hydrothermal Treatment ◽  
Energy Dispersive ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

Magnesite (MgCO3) is the main source for production of magnesium and its compound. In Indonesia, magnesite is quite rare and can be only found in limited amount in Padamarang Island, Southeast Sulawesi Provence. Thus the properties of magnesite and the reactivity degree of the obtained product are of technological importance. The aim of this work was to analyze the characteristics of Padamarang magnesite under calcination and hydrothermal treatment processes. The processes were carried out at various temperatures with range of 150-900°C for 30 minutes. The solids were characterized with respect to their chemical and physical properties by using scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). SEM image indicates that magnesite was formed from thin and flat hexagon sheets. The FTIR and XRD analysis disclose that MgO formed at temperature above 300°C, where as the magnesite sample also lost its mass around 50%. These results demonstrate that Padamarang magnesite decomposes to magnesium oxide and carbon dioxide at high temperature.Magnesit (MgCO3) merupakan sumber utama untuk produksi magnesium dan senyawa-senyawanya. Di Indonesia, magnesit cukup jarang dan hanya dapat ditemukan dalam jumlah yang terbatas di Pulau Padamarang, Propinsi Sulawesi Tenggara. Oleh karena itu sifat magnesit dan derajat reaktivitas dari produk-produk magnesit penting untuk diketahui. Penelitian ini bertujuan untuk menganalisis karakteristik magnesit Padamarang dengan perlakuan kalsinasi dan hidrothermal.  Proses dilakukan pada temperatur yang bervariasi dari 150-900°C selama 30 menit. Sifat kimia dan fisika dari magnesit dikarakterisasi dengan menggunakan scanning electron microscopy dengan energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier-transform infrared spectroscopy (FTIR), dan X-ray diffraction (XRD). Gambar dari analisis SEM menunjukkan bahwa magnesit terbentuk dari lembaran-lembaran heksagonal yang tipis dan datar. Hasil analisis dengan FTIR dan XRD menunjukkan bahwa MgO terbentuk pada temperatur diatas 300°C, dimana sampel magnesit juga kehilangan massanya sekitar 50% pada suhu tersebut. Hal ini menunjukkan bahwa Magnesit Padamarang terdekomposisi menjadi magnesium oksida dan karbon dioksida pada temperatur tinggi.

A Simple Method for Controlling the Morphology of CuO Nanostructures by Droplet

2012 ◽  
Vol 535-537 ◽  
pp. 280-283 ◽  
Author(s):  
Hao Ran An ◽  
Feng Shi Cai ◽  
Xue Wei Wang ◽  
Zhi Hao Yuan
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Optical Microscope ◽  
Growth Mechanisms ◽  
X Ray Diffraction ◽  
Simple Method ◽  
Hydrophobic Substrate ◽  
X Ray ◽  
Shape Selective ◽  
Scanning Electron

Different morphology CuO nanostructures, including platelets, flower-like were simply synthesized at 350 °C controlled by droplet on hydrophobic substrate. This is a simple method which does not require any template, catalyst, or surfactant but can control the morphology of CuO from platelets to flowerlike. The morphologies are strongly dependent on the volume of droplet. Scanning electron microscopy (SEM), Optical microscope and X-ray diffraction (XRD) were used to observe the morphology, crystallinity, and chemical composition of the CuO structures. Growth mechanisms for shape selective CuO synthesis were proposed based on these results.

Synthesis of Fe2O3/CNTs for the Fast Removal of Tetracycline from Aqueous Solutions

2014 ◽  
Vol 915-916 ◽  
pp. 933-941 ◽  
Author(s):  
Zhong Jie Zhang ◽  
Chang Yu Lu ◽  
Wei Huang ◽  
Wei Sheng Guan ◽  
Yue Xin Peng
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Magnetic Measurements ◽  
Ferrite Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Wide Range ◽  
Fast Removal ◽  
Scanning Electron

The effective remove to tetracycline still remains a big challenge for scientists. In this work, we used a new method for preparing functional magnetic CNTS with ferrite nanoparticles. A wide range of techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and magnetic measurements were applied to characterize the obtained Fe2O3/CNTs. Moreover, we have also studied the properties of adsorbent to tetracycline. In addition, we have found that the Fe2O3/CNTs are better reusable adsorbent than other traditional adsorbents by magnetic separation recycling method.

Structural and Morphological Properties of HfxZr1-xO2 Thin Films Prepared by Pechini Route

2010 ◽  
Vol 644 ◽  
pp. 113-116
Author(s):  
L.A. García-Cerda ◽  
Bertha A. Puente Urbina ◽  
M.A. Quevedo-López ◽  
B.E. Gnade ◽  
Leo A. Baldenegro-Perez ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Annealing Temperature ◽  
Precursor Solution ◽  
Dip Coating ◽  
Morphological Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dip Coating Technique ◽  
Scanning Electron

In this study, HfxZr1-xO2 (0 < x < 1) thin films were deposited on silicon wafers using a dip-coating technique and by using a precursor solution prepared by the Pechini route. The effects of annealing temperature on the structure and morphological properties of the proposed films were investigated. HfxZr1-xO2 thin films with 1, 3 and 5 layers were annealed in air for 2 h at 600 and 800 °C and the structural and morphological properties studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM). XRD results show that the films have monoclinic and tetragonal structure depending of the Hf and Zr concentration. SEM photographs show that all films consist of nanocrystalline grains with sizes in the range of 6 - 13 nm. The total film thickness is about 90 nm.

scholarly journals Supplemental Material: Early formation and taphonomic significance of kaolinite associated with Burgess Shale fossils

2020 ◽  
Author(s):  
Ross Anderson ◽  
et al.
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Antibacterial Properties ◽  
Energy Dispersive ◽  
Burgess Shale ◽  
X Ray Diffraction ◽  
X Ray ◽  
Early Formation ◽  
Data Tables ◽  
Scanning Electron

Supplemental methodological details, antibacterial properties of clays, other minerals with distinct fossil/matrix distributions, summaries of mineralogy by taxon, data tables, statistical summaries, and light/scanning electron microscopy–energy-dispersive X-ray spectroscopy images of fossil specimens showing X-ray diffraction selected areas.<br>

Sign in / Sign up

Export Citation Format

Share Document