scholarly journals Correlation between the Photocatalytic Degradability of PAHs over Pt/TiO2-SiO2in Water and Their Quantitative Molecular Structure

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Zhao-hui Luo ◽  
Chuan-ling Wei ◽  
Nan-nan He ◽  
Zhi-guo Sun ◽  
Hui-xin Li ◽  
...  
Keyword(s):  
Molecular Structure ◽  
Molecular Weight ◽  
Molecular Orbital ◽  
Molecular Descriptors ◽  
Order Equation ◽  
First Order ◽  
Highest Occupied Molecular Orbital ◽  
Polycyclic Aromatic ◽  
Lowest Unoccupied Molecular Orbital ◽  
The Difference

The correlation between the photocatalytic degradability of polycyclic aromatic hydrocarbons (PAHs) over Pt/TiO2-SiO2in water and their quantitative molecular structure was studied. Six PAHs, namely, naphthalene, fluorene, phenanthrene, pyrene, benzo[a]pyrene, and dibenzo[a,h]anthracene, were tested in Pt/TiO2-SiO2suspension under UV irradiation. The results showed that the degradation efficiencies of the higher molecular weight PAHs were enhanced significantly in the presence of Pt/TiO2-SiO2, while the degradation efficiencies of the lower molecular weight PAHs were decreased in the presence of Pt/TiO2-SiO2. Both the photolysis and photocatalysis of all PAHs fit the pseudo-first-order equation very well, except FL. Quantitative analysis of molecular descriptors of energy of the highest occupied molecular orbital (Ehomo), energy of the lowest unoccupied molecular orbital (Elumo), and the difference betweenElumoandEhomo, GAP (GAP=Elumo-Ehomo), suggested that the GAP was significant for predicting a PAHs’ photocatalytic degradability. Through comparison against the maximum GAP (7.4529 eV) of PAHs (dibenzo[a,h]anthracene) that could be photocatalytically degraded and the minimum GAP (8.2086 eV) of PAHs (pyrene) that could not be photocatalytically degraded in this study, the photocatalytic degradability of 67 PAHs was predicted. The predictions were partly verified by experimental photocatalytic degradation of anthracene and Indeno[1.2.3.cd]pyrene.

scholarly journals Synthesis of Amorphous Conjugated Copolymers Based on Dithienosilole-Benzothiadiazole Dicarboxylic Imide with Tuned Optical Band Gaps and High Thermal Stability

2021 ◽  
Vol 11 (11) ◽  
pp. 4866
Author(s):  
Ary R. Murad ◽  
Elham M. A. Dannoun ◽  
Shujahadeen B. Aziz ◽  
Ahmed Iraqi ◽  
Sozan N. Abdullah ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Molecular Weight ◽  
Molecular Orbital ◽  
Structural Characteristics ◽  
Average Molecular Weight ◽  
Band Gaps ◽  
X Ray Diffraction ◽  
Optical Band Gaps ◽  
Highest Occupied Molecular Orbital ◽  
Lowest Unoccupied Molecular Orbital

Two alternating copolymers of dithienosilole (DTS) were designed and synthesized with small optical band gaps, flanked by thienyl units as electron-donor moieties and benzothiadiazole dicarboxylic imide (BTDI) as electron-acceptor moieties. The BTDI moieties were anchored to two different solubilizing side chains, namely 3,7-dimethyloctyl and n-octyl chains. An analysis of the effect of the electrochemical, optical, thermal, and structural characteristics of the resulting polymers along with their solubility and molecular weight is the subject of this paper. The Stille polymerization was used to synthesize PDTSDTBTDI-DMO and PDTSDTBTDI-8. The average molecular weight of PDTSDTBTDI-DMO and PDTSDTBTDI-8 is 14,600 and 5700 g mol−1, respectively. Both polymers have shown equivalent optical band gaps around 1.4 eV. The highest occupied molecular orbital (HOMO) levels of the polymers were comparable, around −5.2 eV. The lowest unoccupied molecular orbital (LUMO) values were −3.56 and −3.45 eV for PDTSDTBTDI-DMO and PDTSDTBTDI-8, respectively. At decomposition temperatures above 350 °C, both copolymers showed strong thermal stability. The studies of powder X-ray diffraction (XRD) have shown that they are amorphous in a solid-state.

Electronic and chemical structures of pyrite and arsenopyrite

2015 ◽  
Vol 79 (7) ◽  
pp. 1779-1789 ◽  
Author(s):  
Yu-Qiong Li ◽  
Qian He ◽  
Jian-Hua Chen ◽  
Cui-Hua Zhao
Keyword(s):  
Electron Density ◽  
Molecular Orbital ◽  
Active Sites ◽  
Orbital Interaction ◽  
Orbital Interactions ◽  
Chemical Structures ◽  
Highest Occupied Molecular Orbital ◽  
Lowest Unoccupied Molecular Orbital ◽  
Homo And Lumo ◽  
The Difference

AbstractThe first-principles plane-wave pseudopotential method is used to study the electronic and chemical structures of pyrite (FeS2) and arsenopyrite (FeAsS). The results indicate that an antibonding interaction occurs between Fe and As atoms in arsenopyrite. This interaction results in the Fe atom being repelled towards the S atom to stabilize antibonding orbitals, causing a larger S–Fe–S angle in arsenopyrite than in pyrite and a distortion in the arsenopyrite structure. In arsenopyrite, Fe–Fe distances are alternately long and short. The low spin density of the Fe d electrons supports this configuration in arsenopyrite. However, electron density calculations indicate that there is negligible electron density present between Fe atoms. This result indicates that cation-anion interactions are dominant in arsenopyrite. The pyrite Fe 3d orbital is split below the Fermi level, whereas the arsenopyrite Fe 3d orbital is not split, which can be attributed to the stronger interatomic bonding effects between Fe and S atoms in pyrite compared to arsenopyrite. It is found that the d-p orbital interactions between Fe and S atoms lead to bonding-antibonding splitting in both pyrite and arsenopyrite. However, the bonding effects between pyrite Fe and S atoms are stronger than in arsenopyrite. In arsenopyrite, the bonding interaction between the As 4p and Fe 3d orbitals is very weak, while the antibonding effect is very strong. The p-p orbital interaction is the dominant effect in As–S bonding. Frontier orbital calculations indicate that the Fermi levels of pyrite and arsenopyrite are notably close to each other, resulting in similar electrochemical activities. Orbital coefficient results show that the pyrite Fe 3d and S 3p orbitals are the active orbitals in the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO), respectively. In the case of arsenopyrite, Fe 3d orbitals are very active in both the HOMO and LUMO. Moreover, the activity of the As 4p in the HOMO is greater than S 3p, whereas the opposite situation occurs in the LUMO. Based on these results, As atoms could be one of the active sites for the oxidation of arsenopyrite. In addition, separation of arsenopyrite and pyrite could be achieved by utilizing the difference in chemical reactivities of iron in the two minerals.

scholarly journals Experimental and Theoretical Studies of a Spirostannole and Formation of a Pentaorganostannate

Molecules ◽  
2020 ◽  
Vol 25 (21) ◽  
pp. 4993
Author(s):  
Isabel-Maria Ramirez y Medina ◽  
Markus Rohdenburg ◽  
Waldemar Kipke ◽  
Enno Lork ◽  
Anne Staubitz
Keyword(s):  
Molecular Structure ◽  
Dft Calculations ◽  
Molecular Orbital ◽  
Energy Gap ◽  
Emission Spectra ◽  
Highest Occupied Molecular Orbital ◽  
Td Dft ◽  
Absorbing Material ◽  
Lowest Unoccupied Molecular Orbital ◽  
Experimental And Theoretical Studies

A new spirostannole, 1,1′,3,3′-tetrakis(5-methylthiophen-2-yl)-4,4′,5,5′,6,6′,7,7′-octahydro-2,2′-spirobi[benzo[c]stannole] (4), is synthesised and the molecular structure is compared with the optimised geometry from DFT calculations. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) are twice degenerated and show a small HOMO–LUMO energy gap of 3.2 eV. In addition, cyclic voltammetry measurements are conducted and three redox processes are observed. Absorption and emission spectra show maxima at λabs,max 436 nm and λem,max 533 nm, respectively. Spirostannole 4 is a strongly absorbing material, but an extremely weak emitter in solution at 295.15 K. However, when the solution is cooled from 280 to 80 K, the emission becomes visible. The reaction of spirostannole 4 with methyllithium is monitored by NMR spectroscopy at 238.15 K. The 119Sn{1H} NMR signal shifts from −36.0 (4) to −211.0 ppm, which is indicative of the formation of the lithium pentaorganostannate 5. The complex is thermally instable at 295.15 K, but insights into the molecular structure and electronic behaviour are obtained by DFT and TD-DFT calculations.

ANALISA KANDUNGAN BETA-GLUKAN LARUT AIR DAN LARUT ALKALI DARI TUBUH BUAH JAMUR TIRAM (Pleurotus ostreatus) DAN SHIITAKE (Lentinus edodes)

2013 ◽  
Vol 13 (3) ◽  
Author(s):  
Netty Widyastuti ◽  
Teguh Baruji ◽  
Henky Isnawan ◽  
Priyo Wahyudi ◽  
Donowati Donowati
Keyword(s):  
Molecular Structure ◽  
Molecular Weight ◽  
Immune System ◽  
Pleurotus Ostreatus ◽  
Water Soluble ◽  
Low Molecular Weight ◽  
Lentinus Edodes ◽  
Beta Glucan ◽  
Oyster Mushrooms ◽  
The Difference

Beta glucan is a polysaccharide compound, generally not soluble inwater and resistant to acid. Beta glucan is used as an immunomodulator (enhancing the immune system) in mammals is usually a beta-glucan soluble in water, easily absorbed and has a low molecular weight. Several example of beta-glucan such as cellulose (β-1 ,4-glucan), lentinan (β-1 0.6-glucan) and (β-1 ,3-glucan), pleuran (β-1, 6 and β-1 ,3-glucan) are isolated from species of fungi Basidiomycota include mushrooms (Pleurotus ostreatus) and shiitake (Lentinus edodes).The purpose of thisresearch activity is to obtain beta-glucan compound that can be dissolved in water and in alkali derived from fungi Basidiomycota, i.e, Oyster mushrooms (Pleurotus ostreatus) and shiitake (Lentinus edodes). The result of beta-glucan compared to characterize the resulting beta glucan that is molecular structure . The difference of beta glucan extraction is based on the differences in solubility of beta-glucan. Beta glucan could be water soluble and insoluble water.

scholarly journals Electronic Properties of Triangle Molybdenum Disulfide (MoS2) Clusters with Different Sizes and Edges

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 1157
Author(s):  
Songsong Wang ◽  
Changliang Han ◽  
Liuqi Ye ◽  
Guiling Zhang ◽  
Yangyang Hu ◽  
...  
Keyword(s):  
Quantum Chemistry ◽  
Electronic Properties ◽  
Absorption Spectra ◽  
Molecular Orbital ◽  
Electronic Structures ◽  
Edge States ◽  
Frontier Orbitals ◽  
Edge Structure ◽  
Highest Occupied Molecular Orbital ◽  
Lowest Unoccupied Molecular Orbital

The electronic structures and transition properties of three types of triangle MoS2 clusters, A (Mo edge passivated with two S atoms), B (Mo edge passivated with one S atom), and C (S edge) have been explored using quantum chemistry methods. The highest occupied molecular orbital (HOMO)–lowest unoccupied molecular orbital (LUMO) gap of B and C is larger than that of A, due to the absence of the dangling of edge S atoms. The frontier orbitals (FMOs) of A can be divided into two categories, edge states from S3p at the edge and hybrid states of Mo4d and S3p covering the whole cluster. Due to edge/corner states appearing in the FMOs of triangle MoS2 clusters, their absorption spectra show unique characteristics along with the edge structure and size.

scholarly journals Photoconductivity of Low-Bandgap Polymer and Polymer: Fullerene Bulk Heterojunction Studied by Constant Photocurrent Method

2015 ◽  
Vol 3 (1) ◽  
Author(s):  
V. V. Malov ◽  
A. R. Tameev ◽  
S. V. Novikov ◽  
M. V. Khenkin ◽  
A. G. Kazanskii ◽  
...  
Keyword(s):  
Molecular Orbital ◽  
Bulk Heterojunction ◽  
Inorganic Materials ◽  
Fullerene Derivative ◽  
Approximation Procedure ◽  
Photoelectric Properties ◽  
Highest Occupied Molecular Orbital ◽  
Donor Acceptor ◽  
Lowest Unoccupied Molecular Orbital ◽  
Doped Polymers

AbstractOptical and photoelectric properties of modern photosensitive polymers are of great interest due to their prospects for photovoltaic applications. In particular, an investigation of absorption and photoconductivity edge of these materials could provide valuable information. For these purpose we applied the constant photocurrent method which has proved its efficiency for inorganic materials. PCDTBT and PTB7 polymers were used as objects for the study as well as their blends with a fullerene derivative PC71BM. The measurements by constant photocurrent method (CPM) show that formation of bulk heterojunction (BHJ) in the blends increases photoconductivity and results in a redshift of the photocurrent edge in the doped polymers compared with that in the neat polymers. Obtained from CPM data, spectral dependences of absorption coefficient were approximated using Gaussian distribution of density-of-states within HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital) bands. The approximation procedure allowed us to evaluate rather optical than electrical bandgaps for the studied materials. Moreover, spectra of polymer:PC71BM blends were fitted well by the sum of two Gaussian peaks which reveal both the transitions within the polymer and the transitions involving charge transfer states at the donor-acceptor interface in the BHJ.

scholarly journals Estudo do comportamento óptico-estrutural do LiNbO3

Cerâmica ◽  
2003 ◽  
Vol 49 (309) ◽  
pp. 36-39 ◽  
Author(s):  
C. D. Pinheiro ◽  
V. Bouquet ◽  
F. M. Pontes ◽  
E. R. Leite ◽  
E. Longo
Keyword(s):  
Molecular Orbital ◽  
Highest Occupied Molecular Orbital ◽  
Lowest Unoccupied Molecular Orbital

Realizou-se um estudo teórico-experimental sobre as estruturas cristalina e amorfa de niobato de lítio, para verificar a influência dos defeitos sobre as propriedades ópticas desse semicondutor. Filmes finos cristalinos de LiNbO3 (c-LN) e amorfo (a-LN) foram preparados pelo método dos precursores poliméricos, sendo caracterizados por difração de raios X e microscopia de força atômica. As propriedades ópticas foram estudadas por UV-Visível e espectroscopia Raman. Em particular, o filme amorfo apresentou luminescência, cuja posição do pico varia de acordo com o comprimento de onda de excitação. A diferença de energia entre os níveis HOMO (Highest Occupied Molecular Orbital) e LUMO (Lowest Unoccupied Molecular Orbital) revela que o gap de banda da fase cristalina é maior que aquele exibido pela fase amorfa, em acordo com os dados experimentais de UV-visível. Observou-se o surgimento de novos níveis eletrônicos na região do gap de banda na estrutura amorfa, este fato pode explicar as propriedades ópticas particulares observadas sobre o filme amorfo.

Synthesis and characterization of oligo-4-[(pyridin-3-ylimino)methyl]phenol

2007 ◽  
Vol 61 (3) ◽  
Author(s):  
İ. Kaya ◽  
S. Çulhaoğlu ◽  
D. Şenol
Keyword(s):  
Molecular Orbital ◽  
Thermal Analyses ◽  
Size Exclusion ◽  
Degradation Temperature ◽  
Highest Occupied Molecular Orbital ◽  
N2 Atmosphere ◽  
Exclusion Chromatography ◽  
N Doping ◽  
Lowest Unoccupied Molecular Orbital ◽  
Optimum Reaction

AbstractThe oxidative polycondensation of 4-[(pyridin-3-ylimino)methyl]phenol (4-PIMP) with O2, H2O2, and NaOCl was studied in an aqueous alkaline medium between 50°C and 90°C. Oligo-4-[(pyridin-3-ylimino)methyl]phenol (O-4-PIMP) prepared was characterized by 1H-NMR, 13C-NMR, FT-IR, UV-VIS, size-exclusion chromatography, and elemental and thermal analyses techniques. At the optimum reaction conditions, the yield of O-4-PIMP was 18.9%, 39.4%, and 46.8% using H2O2, O2, and NaOCl oxidant, respectively. According to the TG analysis, the initial degradation temperature of O-4-PIMP was 218°C, which was by 50°C higher than that of 4-PIMP. Thermal analyses of 4-PIMP and O-4-PIMP were carried out in N2 atmosphere at 15–1000°C. The highest occupied molecular orbital, the lowest unoccupied molecular orbital, and electrochemical energy gaps of 4-PIMP and O-4-PIMP were determined from the onset potentials for n-doping and p-doping, respectively. Also, optical band gaps of 4-PIMP and O-4-PIMP were determined according to UV-VIS measurements.

scholarly journals QTAIM investigation of bis(pyrazol-1-yl)methane derivative and its Zn(II) complexes (ZnLX2, X=Cl, Br or I)

2015 ◽  
Vol 80 (8) ◽  
pp. 997-1008 ◽  
Author(s):  
Maryam Dehestani ◽  
Leila Zeidabadinejad
Keyword(s):  
Molecular Orbital ◽  
Critical Points ◽  
Structural Parameters ◽  
Frontier Molecular Orbital ◽  
Orbital Energy ◽  
Theory Approach ◽  
Topological Parameters ◽  
Molecular Orbital Energy ◽  
Highest Occupied Molecular Orbital ◽  
Lowest Unoccupied Molecular Orbital

Topological analyses of the electron density using the quantum theory of atoms in molecules (QTAIM) have been carried out at the B3PW91/6-31g (d) theoretical level, on bis(pyrazol-1-yl)methanes derivatives 9-(4-(di (1H-pyrazol-1-yl)-methyl)phenyl)-9H-carbazole (L) and its zinc(II) complexes: ZnLCl2 (1), ZnLBr2 (2) and ZnLI2 (3). The topological parameters derived from Bader theory were also analyzed; these are characteristics of Zn-bond critical points and also of ring critical points. The calculated structural parameters are the frontier molecular orbital energies highest occupied molecular orbital energy (EHOMO), lowest unoccupied molecular orbital energy (ELUMO), hardness (?), softness (S), the absolute electronegativity (?), the electrophilicity index (?) and the fractions of electrons transferred (?N) from ZnLX2 complexes to L. The numerous correlations and dependencies between energy terms of the Symmetry Adapted Perturbation Theory approach (SAPT), geometrical, topological and energetic parameters were detected and described.

scholarly journals Emphasizing the Operational Role of a Novel Graphene-Based Ink into High Performance Ternary Organic Solar Cells

2019 ◽  
Author(s):  
Minas M. Stylianakis ◽  
Dimitriοs M. Kosmidis ◽  
Katerina Anagnostou ◽  
Christos Polyzoidis ◽  
Miron Krassas ◽  
...  
Keyword(s):  
Solar Cells ◽  
Molecular Orbital ◽  
Organic Solar Cells ◽  
High Performance ◽  
Energy Levels ◽  
Fullerene Derivative ◽  
Highest Occupied Molecular Orbital ◽  
Lowest Unoccupied Molecular Orbital ◽  
Synthetic Routes

A novel solution-processed graphene-based material was synthesized by treating graphene oxide (GO) with 2,5,7-trinitro-9-oxo-fluorenone-4-carboxylic acid (TNF-COOH) moieties, via simple synthetic routes. The yielded molecule N-[(carbamoyl-GO)ethyl]-N’-[(carbamoyl)-(2,5,7-trinitro-9-oxo-fluorene)] (GO-TNF) was thoroughly characterized and it was shown that it presents favorable highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels to function as a bridge component between the polymeric donor poly({4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl] thieno[3,4-b]thiophenediyl}) (PTB7) and the fullerene derivative acceptor [6,6]-phenyl-C71-butyric-acid-methylester (PC71BM). In this context, a GO-TNF based ink was prepared and directly incorporated within the binary photoactive layer, in different volume ratios (1-3% ratio to the blend), for the effective realization of inverted ternary organic solar cells (OSCs) of the structure ITO/PFN/PTB7:GO-TNF:PC71BM/MoO3/Al. The addition of 2% v/v GO-TNF ink led to a champion power conversion efficiency (PCE) of 8.71% that was enhanced by ~13% as compared to the reference cell.

Sign in / Sign up

Export Citation Format

Share Document