scholarly journals Dynamic Characteristics of Electrostatically Actuated Shape Optimized Variable Geometry Microbeam

2015 ◽  
Vol 2015 ◽  
pp. 1-15 ◽  
Author(s):  
Sha Zhang ◽  
Wen-Ming Zhang ◽  
Zhi-Ke Peng ◽  
Guang Meng
Keyword(s):  
Dynamic Response ◽  
Resonant Frequency ◽  
Dynamic Characteristics ◽  
Maximum Amplitude ◽  
Dynamic Responses ◽  
Squeeze Film ◽  
Gradual Change ◽  
Variable Geometry ◽  
Electrostatically Actuated ◽  
Width Function

We mainly analyze the dynamic characteristics of electrostatically actuated shape optimized variable geometry microbeam. A nonlinear dynamic model considering midplane stretching, electrostatic force, and electrical field fringing effects is developed. Firstly, we study the static responses of the optimized microbeams under DC polarization voltage. The generalized differential quadrature method (GDQM) is used. Secondly, the dynamic responses of the shape optimized microbeams driven by DC and AC voltages are investigated using GDQM in conjunction with Levenberg-Marquardt optimization method. The results show that the more gradual change in width, the larger the resonant frequency and the maximum amplitude at resonance. Then we further discuss in detail how do the maximum width, midsection width, and curvature of the width function affect the frequency response of the microbeams. We find that the amplitude and resonant frequency of the dynamic response are not monotonically increasing as the curvature of the width function increases and there exists a critical curvature. This analysis will be helpful in the optimal design of MEMS actuators. Finally, for more consideration, different residual stress, squeeze-film damping, and fringing effect models are introduced into the governing equation of motion and we compare the corresponding dynamic response.

Nonlinear Vibration Analysis of a Dielectric Elastomer Based Microbeam Resonator

2016 ◽  
Vol 846 ◽  
pp. 188-192 ◽  
Author(s):  
Chuang Feng ◽  
Jie Yang ◽  
Liao Liang Ke
Keyword(s):  
Resonant Frequency ◽  
Dynamic Characteristics ◽  
Vibration Analysis ◽  
Vibration Amplitude ◽  
Ambient Pressure ◽  
Dielectric Elastomer ◽  
Squeeze Film ◽  
Beam Resonator ◽  
Squeeze Film Damping ◽  
Electrical Voltage

Dynamic characteristics of a dielectric elastomer based micro beam resonator are investigated by taking into consideration of squeeze-film damping, large deformation and electrical voltage. The analysis shows that the resonant frequency of the resonator can be tuned through changing applied electrical voltage. It is observed that the natural frequency of the resonator increases with the increase of the vibration amplitude. In addition, the ambient pressure can significantly alter the resonant frequency of the resonator. The analysis is envisaged to provide qualitative predictions and guidelines for design and application of DE-based micro resonators.

Nonlinear Vibration of Electrostatically Actuated MEMS Resonators Under Parametric and External Excitations

2007 ◽  
Author(s):  
Wen-Ming Zhang ◽  
Guang Meng ◽  
Di Chen
Keyword(s):  
Dynamic Characteristics ◽  
Nonlinear Dynamic ◽  
Squeeze Film ◽  
Electrostatically Actuated ◽  
Squeeze Film Damping ◽  
Mems Resonators ◽  
Nonlinear Dynamic Characteristics ◽  
Dynamical Parameters ◽  
Parametric And External Excitations ◽  
Significant Attention

Electrostatically actuated resonant MEMS (Micro-electromechanical Systems) have gotten significant attention due to their geometric simplicity and broad applicability. In this paper, analyses and simulations for the dynamics of electrostatically actuated MEM structures under parametric and external excitations are presented. The presented model and methodology enable simulation of the dynamics of the electrostatic MEM structure undergoing small motions. The numerical results showing the effects of varying the applied voltages and the squeeze film damping on the resonant frequencies and nonlinear dynamic characteristics are given in detail. Resonant frequency and peak amplitude are examined for variation of the dynamical parameters involved. It is demonstrated that the system goes through a complex nonlinear oscillation as the system parameters change. This investigation provides an understanding of the nonlinear dynamic characteristics of electrostatically actuated resonant MEMS.

scholarly journals Study on dynamic characteristics of leaf spring system in vibration screen

2021 ◽  
pp. 146134842110229
Author(s):  
Jiacheng Zhou ◽  
Chao Hu ◽  
Ziqiu Wang ◽  
Zhengfa Ren ◽  
Xiaoyu Wang ◽  
...  
Keyword(s):  
Dynamic Characteristics ◽  
Vertical Direction ◽  
Maximum Amplitude ◽  
Exciting Force ◽  
Mode Shapes ◽  
Leaf Spring ◽  
Amplification Factors ◽  
Simulation And Experiment ◽  
Exciting Forces ◽  
Spring System

By studying dynamic characteristics of the leaf spring system, a new elastic component is designed to reduce the working load and to a certain extent to ensure the linearity as well as increase the amplitude in the vertical and horizontal directions in vibration screen. The modal parameters, amplitudes, and amplification factors of the leaf spring system are studied by simulation and experiment. The modal results show that the leaf spring system vibrates in horizontal and vertical directions in first and second mode shapes, respectively. It is conducive to loosening and moving the particles on the vibration screen. In addition, it is found that the maximum amplitude and amplification factor in the horizontal direction appear at 300 r/min (5 Hz) while those in the vertical direction appear at 480 r/min (8 Hz), which are higher than those in the disc spring system. Moreover, the amplitude of the leaf spring system increases proportionally with the increase of exciting force while the amplification factors are basically the same under different exciting forces, indicating the good linearity of the leaf spring system. Furthermore, the minimum exciting force occurs in the leaf spring system under the same amplitude by comparing the exciting force among different elastic components. The above works can provide guidance for the industrial production in vibration screen.

3-D elastic coupling vibration and acoustical radiation characteristics of cracked gear under elastic support condition

2015 ◽  
Vol 23 (9) ◽  
pp. 1548-1568 ◽  
Author(s):  
Shao Renping ◽  
Purong Jia ◽  
Xiankun Qi
Keyword(s):  
Dynamic Response ◽  
Support System ◽  
Three Dimensional ◽  
Elastic Support ◽  
Dynamic Responses ◽  
Tooth Root ◽  
Support Condition ◽  
Elastic Boundary ◽  
Root Crack ◽  
Elastic Disc

According to the actual working condition of the gear, the supporting gear shaft is treated as an elastic support. Its impact on the gear body vibration is considered and investigated and the dynamic response of elastic teeth and gear body is analyzed. On this basis, the gear body is considered as a three-dimensional elastic disc and the gear teeth are treated as an elastic cantilever beam. Under the conditions of the elastic boundary (support shaft), combining to the elastic disk and elastic teeth, the influence of three-dimensional elastic discs on the meshing tooth response under an elastic boundary condition is also included. A dynamic model of the gear support system and calculated model of the gear tooth response are then established. The inherent characteristics of the gear support system and dynamics response of the meshing tooth are presented and simulated. It was shown by the results that it is correct to use the elastic support condition to analyze the gear support system. Based on the above three-dimensional elastic dynamics analysis, this paper set up a dynamics coupling model of a cracked gear structure support system that considered the influence of a three-dimensional elastic disc on a cracked meshing tooth under elastic conditions. It discusses the dynamic characteristic of the cracked gear structure system and coupling dynamic response of the meshing tooth, offering a three-dimensional elastic body model of the tooth root crack and pitch circle crack with different sizes, conducting the three-dimensional elastic dynamic analysis to the faulty crack. ANSYS was employed to carry out dynamic responses, as well as to simulate the acoustic field radiation orientation of a three-dimensional elastic crack body at the tooth root crack and pitch circle with different sizes.

Evaluation of the Dynamic-Response-Based Intact Stability Criterion for Floating Wind Turbines

2015 ◽  
Author(s):  
Marco Masciola ◽  
Xiaohong Chen ◽  
Qing Yu
Keyword(s):  
Wind Speed ◽  
Dynamic Response ◽  
Wind Turbines ◽  
Stability Criterion ◽  
Area Ratio ◽  
Operating Conditions ◽  
Dynamic Responses ◽  
Stability Criteria ◽  
Intact Stability ◽  
Overturning Moment

As an alternative to the conventional intact stability criterion for floating offshore structures, known as the area-ratio-based criterion, the dynamic-response-based intact stability criteria was initially developed in the 1980s for column-stabilized drilling units and later extended to the design of floating production installations (FPIs). Both the area-ratio-based and dynamic-response-based intact stability criteria have recently been adopted for floating offshore wind turbines (FOWTs). In the traditional area-ratio-based criterion, the stability calculation is quasi-static in nature, with the contribution from external forces other than steady wind loads and FOWT dynamic responses captured through a safety factor. Furthermore, the peak wind overturning moment of FOWTs may not coincide with the extreme storm wind speed normally prescribed in the area-ratio-based criterion, but rather at the much smaller rated wind speed in the power production mode. With these two factors considered, the dynamic-response-based intact stability criterion is desirable for FOWTs to account for their unique dynamic responses and the impact of various operating conditions. This paper demonstrates the implementation of a FOWT intact stability assessment using the dynamic-response-based criterion. Performance-based criteria require observed behavior or quantifiable metrics as input for the method to be applied. This is demonstrated by defining the governing load cases for two conceptual FOWT semisubmersible designs at two sites. This work introduces benchmarks comparing the area-ratio-based and dynamic-response-based criteria, gaps with current methodologies, and frontier areas related to the wind overturning moment definition.

Experimental Investigation on the Dynamic Response of a Three Legged Articulated Type Offshore Wind Tower

2016 ◽  
Author(s):  
Chinsu Mereena Joy ◽  
Anitha Joseph ◽  
Lalu Mangal
Keyword(s):  
Dynamic Response ◽  
Wind Turbine ◽  
Renewable Energy Sources ◽  
Offshore Structures ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Experimental Investigations ◽  
Offshore Wind Turbine ◽  
Ocean Engineering ◽  
Study Results

Demand for renewable energy sources is rapidly increasing since they are able to replace depleting fossil fuels and their capacity to act as a carbon neutral energy source. A substantial amount of such clean, renewable and reliable energy potential exists in offshore winds. The major engineering challenge in establishing an offshore wind energy facility is the design of a reliable and financially viable offshore support for the wind turbine tower. An economically feasible support for an offshore wind turbine is a compliant platform since it moves with wave forces and offer less resistance to them. Amongst the several compliant type offshore structures, articulated type is an innovative one. It is flexibly linked to the seafloor and can move along with the waves and restoring is achieved by large buoyancy force. This study focuses on the experimental investigations on the dynamic response of a three-legged articulated structure supporting a 5MW wind turbine. The experimental investigations are done on a 1: 60 scaled model in a 4m wide wave flume at the Department of Ocean Engineering, Indian Institute of Technology, Madras. The tests were conducted for regular waves of various wave periods and wave heights and for various orientations of the platform. The dynamic responses are presented in the form of Response Amplitude Operators (RAO). The study results revealed that the proposed articulated structure is technically feasible in supporting an offshore wind turbine because the natural frequencies are away from ocean wave frequencies and the RAOs obtained are relatively small.

scholarly journals A New Optimal DTC Switching Strategy for Open-End Windings Induction Machine using Dual Inverter

2021 ◽  
Vol 12 (3) ◽  
pp. 1405
Author(s):  
Nabilah Aisyah ◽  
Maaspaliza Azri ◽  
Auzani Jidin ◽  
M. Z. Aihsan ◽  
MHN Talib
Keyword(s):  
Dynamic Response ◽  
High Speed ◽  
Dynamic Condition ◽  
Dynamic Control ◽  
Direct Torque Control ◽  
Torque Control ◽  
Dynamic Responses ◽  
Voltage Source ◽  
Optimal Switching ◽  
Stator Flux

<span>Since the early 1980s, fast torque dynamic control has been a subject of research in AC drives. To achieve superior torque dynamic control, two major techniques are used, namely Field Oriented Control (FOC) and Direct Torque Control (DTC), spurred on by rapid advances in embedded computing systems. Both approaches employ the space vector modulation (SVM) technique to perform the voltage source inverter into over modulation region for producing the fastest torque dynamic response. However, the motor current tends to increase beyond its limit (which can damage the power switches) during the torque dynamic condition, due to inappropriate flux level (i.e. at rated stator flux). Moreover, the torque dynamic response will be slower, particularly at high speed operations since the increase of stator flux will produce negative torque slopes more often. The proposed research aims to formulate an optimal switching modulator and produce the fastest torque dynamic response. In formulating the optimal switching modulator, the effects of selecting different voltage vectors on torque dynamic responses will be investigated. With greater number of voltage vectors offered in dual inverters, the identification of the most optimal voltage vectors for producing the fastest torque dynamic responses will be carried out based on the investigation. The main benefit of the proposed strategy is that it provides superior fast torque dynamic response which is the main requirements for many AC drive applications, e.g. traction drives, electric transportations and vehicles.</span>

scholarly journals A Study on Dynamic Response of Tunnel Blasting Beneath Surface Buildings

2021 ◽  
Author(s):  
chen huang ◽  
youyi zhang ◽  
Jun Zhao
Keyword(s):  
Dynamic Response ◽  
Weight Bearing ◽  
Dynamic Responses ◽  
Frame Structure ◽  
Blasting Vibration ◽  
Exterior Wall ◽  
Adjacent Buildings ◽  
Propagation Law ◽  
Blasting Excavation ◽  
Tunnel Blasting

In order to study the dynamic response of adjacent buildings in the process of tunnel blasting excavation, taking Yangjia tunnel blasting through a five-story frame structure residential building as an example, the propagation law of blasting seismic wave was analyzed by using HHT method through on-site blasting monitoring. Then, the ALE algorithm in ANSYS/LS-DYNA software was used to establish a three-dimensional numerical model based on the surrounding rock-cutting section-structure coupling to study the dynamic response of adjacent buildings under the blasting vibration of tunnel. The results show that the HHT analysis method can clearly describe the energy distribution of vibration signals in the time and frequency domain. The energy carried by the blasting vibration signal is corresponding to the detonating section, and the maximum energy appears in the cutting section, which further verifying that the vibration effect caused by the cutting hole blasting is the strongest. In the process of tunnel blasting, the dynamic responses of beams, columns and exterior walls of adjacent buildings are not consistent and show different variation rules along the height direction. In addition, the stress centralization mainly occurs in the exterior wall of the building, the joint of the exterior wall and the column, the joint of the exterior wall and the beam, and the joint of the exterior wall and the floor and other non-weight bearing area, indicating that these parts are more likely to damage and crack in the process of tunnel blasting.

Sign in / Sign up

Export Citation Format

Share Document