Evaluation of the Dynamic-Response-Based Intact Stability Criterion for Floating Wind Turbines

2015 ◽  
Author(s):  
Marco Masciola ◽  
Xiaohong Chen ◽  
Qing Yu
Keyword(s):  
Wind Speed ◽  
Dynamic Response ◽  
Wind Turbines ◽  
Stability Criterion ◽  
Area Ratio ◽  
Operating Conditions ◽  
Dynamic Responses ◽  
Stability Criteria ◽  
Intact Stability ◽  
Overturning Moment

As an alternative to the conventional intact stability criterion for floating offshore structures, known as the area-ratio-based criterion, the dynamic-response-based intact stability criteria was initially developed in the 1980s for column-stabilized drilling units and later extended to the design of floating production installations (FPIs). Both the area-ratio-based and dynamic-response-based intact stability criteria have recently been adopted for floating offshore wind turbines (FOWTs). In the traditional area-ratio-based criterion, the stability calculation is quasi-static in nature, with the contribution from external forces other than steady wind loads and FOWT dynamic responses captured through a safety factor. Furthermore, the peak wind overturning moment of FOWTs may not coincide with the extreme storm wind speed normally prescribed in the area-ratio-based criterion, but rather at the much smaller rated wind speed in the power production mode. With these two factors considered, the dynamic-response-based intact stability criterion is desirable for FOWTs to account for their unique dynamic responses and the impact of various operating conditions. This paper demonstrates the implementation of a FOWT intact stability assessment using the dynamic-response-based criterion. Performance-based criteria require observed behavior or quantifiable metrics as input for the method to be applied. This is demonstrated by defining the governing load cases for two conceptual FOWT semisubmersible designs at two sites. This work introduces benchmarks comparing the area-ratio-based and dynamic-response-based criteria, gaps with current methodologies, and frontier areas related to the wind overturning moment definition.

scholarly journals Performance Enhancement of Proposed Namaacha Wind Farm by Minimising Losses Due to the Wake Effect: A Mozambican Case Study

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4291
Author(s):  
Paxis Marques João Roque ◽  
Shyama Pada Chowdhury ◽  
Zhongjie Huan
Keyword(s):  
Wind Speed ◽  
Wind Power ◽  
Wind Turbines ◽  
Power Output ◽  
Wind Farm ◽  
Wind Farms ◽  
Operating Conditions ◽  
Wake Effect ◽  
Wind Generators ◽  
Wind Potential

District of Namaacha in Maputo Province of Mozambique presents a high wind potential, with an average wind speed of around 7.5 m/s and huge open fields that are favourable to the installation of wind farms. However, in order to make better use of the wind potential, it is necessary to evaluate the operating conditions of the turbines and guide the independent power producers (IPPs) on how to efficiently use wind power. The investigation of the wind farm operating conditions is justified by the fact that the implementation of wind power systems is quite expensive, and therefore, it is imperative to find alternatives to reduce power losses and improve energy production. Taking into account the power needs in Mozambique, this project applied hybrid optimisation of multiple energy resources (HOMER) to size the capacity of the wind farm and the number of turbines that guarantee an adequate supply of power. Moreover, considering the topographic conditions of the site and the operational parameters of the turbines, the system advisor model (SAM) was applied to evaluate the performance of the Vestas V82-1.65 horizontal axis turbines and the system’s power output as a result of the wake effect. For any wind farm, it is evident that wind turbines’ wake effects significantly reduce the performance of wind farms. The paper seeks to design and examine the proper layout for practical placements of wind generators. Firstly, a survey on the Namaacha’s electricity demand was carried out in order to obtain the district’s daily load profile required to size the wind farm’s capacity. Secondly, with the previous knowledge that the operation of wind farms is affected by wake losses, different wake effect models applied by SAM were examined and the Eddy–Viscosity model was selected to perform the analysis. Three distinct layouts result from SAM optimisation, and the best one is recommended for wind turbines installation for maximising wind to energy generation. Although it is understood that the wake effect occurs on any wind farm, it is observed that wake losses can be minimised through the proper design of the wind generators’ placement layout. Therefore, any wind farm project should, from its layout, examine the optimal wind farm arrangement, which will depend on the wind speed, wind direction, turbine hub height, and other topographical characteristics of the area. In that context, considering the topographic and climate features of Mozambique, the study brings novelty in the way wind farms should be placed in the district and wake losses minimised. The study is based on a real assumption that the project can be implemented in the district, and thus, considering the wind farm’s capacity, the district’s energy needs could be met. The optimal transversal and longitudinal distances between turbines recommended are 8Do and 10Do, respectively, arranged according to layout 1, with wake losses of about 1.7%, land utilisation of about 6.46 Km2, and power output estimated at 71.844 GWh per year.

scholarly journals Dynamic Response of Articulated Offshore Wind Turbines under Different Water Depths

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2784
Author(s):  
Pei Zhang ◽  
Shugeng Yang ◽  
Yan Li ◽  
Jiayang Gu ◽  
Zhiqiang Hu ◽  
...  
Keyword(s):  
Dynamic Response ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Dynamic Responses ◽  
Wind Pressure ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Offshore Area ◽  
Offshore Wind Turbines ◽  
Water Depths

Focusing on the transitional depth offshore area from 50 m to 75 m, types of articulated foundations are proposed for supporting the NREL 5 MW offshore wind turbine. To investigate the dynamic behaviors under various water depths, three articulated foundations were adopted and numerical simulations were conducted in the time domain. An in-house code was chosen to simulate the dynamic response of the articulated offshore wind turbine. The aerodynamic load on rotating blades and the wind pressure load on tower are calculated based on the blade element momentum theory and the empirical formula, respectively. The hydrodynamic load is simulated by 3D potential flow theory. The motions of foundation, the aerodynamic performance of the wind turbine, and the loads on the articulated joint are documented and compared in different cases. According to the simulation, all three articulated offshore wind turbines show great dynamic performance and totally meet the requirement of power generation under the rated operational condition. Moreover, the comparison is based on time histories and spectra among these responses. The result shows that dynamic responses of the shallower one oscillate more severely compared to the other designs.

scholarly journals Modified Power Curves for Prediction of Power Output of Wind Farms

Energies ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1805 ◽  
Author(s):  
Mohsen Vahidzadeh ◽  
Corey D. Markfort
Keyword(s):  
High Resolution ◽  
Wind Speed ◽  
Wind Turbines ◽  
Power Output ◽  
Wind Farm ◽  
Sonic Anemometer ◽  
Wind Farms ◽  
Operating Conditions ◽  
Horizontal Axis Wind Turbine ◽  
Power Curves

Power curves are used to model power generation of wind turbines, which in turn is used for wind energy assessment and forecasting total wind farm power output of operating wind farms. Power curves are based on ideal uniform inflow conditions, however, as wind turbines are installed in regions of heterogeneous and complex terrain, the effect of non-ideal operating conditions resulting in variability of the inflow must be considered. We propose an approach to include turbulence, yaw error, air density, wind veer and shear in the prediction of turbine power by using high resolution wind measurements. In this study, two modified power curves using standard ten-minute wind speed and high resolution one-second data along with a derived power surface were tested and compared to the standard operating curve for a 2.5 MW horizontal axis wind turbine. Data from supervisory control and data acquisition (SCADA) system along with wind speed measurements from a nacelle-mounted sonic anemometer and wind speed measurements from a nearby meteorological tower are used in the models. The results show that all of the proposed models perform better than the standard power curve while the power surface results in the most accurate power prediction.

scholarly journals Performance Evaluation of Grid-Connected Wind Turbine Generators

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6807
Author(s):  
Henok Ayele Behabtu ◽  
Thierry Coosemans ◽  
Maitane Berecibar ◽  
Kinde Anlay Fante ◽  
Abraham Alem Kebede ◽  
...  
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Energy Generation ◽  
Operating Conditions ◽  
Induction Generator ◽  
Turbine Generators ◽  
Wind Turbine Generators ◽  
Generation Capacity ◽  
Variable Wind

The risk of oscillation of grid-connected wind turbine generators (WTGs) is well known, making it all the more important to understand the characteristics of different WTGs and analyze their performance so that the problems’ causes are identified and resolved. While many studies have evaluated the performance of grid-connected WTGs, most lack clarity and precision in the modeling and simulation techniques used. Moreover, most of the literature focuses on a single mode of operation of WTGs to analyze their performances. Therefore, this paper updates the literature by considering the different operating conditions for WTGs. Using MATLAB/SIMULINK it expands the evaluation to the full range of vulnerabilities of WTGs: from the wind turbine to grid connection. A network representing grid-connected squirrel-cage induction generator (SCIG) and doubly-fed induction generator (DFIG) wind turbines are selected for simulation. The performances of SCIG and DFIG wind turbines are evaluated in terms of their energy generation capacity during constant rated wind speed, variable wind speed, and ability of fault-ride through during dynamic system transient operating conditions. The simulation results show the performance of DFIG is better than SCIG in terms of its energy generation capacity during variable wind speed conditions and active and reactive power control capability during steady-state and transient operating conditions. As a result, DFIG wind turbine is more suitable for large-scale wind power plants connected to weak utility grid applications than SCIG.

scholarly journals Design of a Robust Adaptive Controller for the Pitch and Torque Control of Wind Turbines

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1195 ◽  
Author(s):  
Srikanth Bashetty ◽  
Joaquin I. Guillamon ◽  
Shanmukha S. Mutnuri ◽  
Selahattin Ozcelik
Keyword(s):  
Adaptive Control ◽  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Degrees Of Freedom ◽  
Robust Adaptive Control ◽  
Operating Conditions ◽  
Torque Control ◽  
Rotor Speed ◽  
Robust Adaptive

In this paper, robust adaptive control is designed for pitch and torque control of the wind turbines operating under turbulent wind conditions. The dynamics of the wind turbine are formulated by considering the five degrees of freedom system (rotor angle, gearbox angle, generator angle, flap-wise deflection of the rotor blade, and axial displacement of the nacelle). The controller is designed to maintain the rotor speed, maximize the aerodynamic efficiency of the wind turbine, and reduce the loads due to high wind speeds. Gaussian probability distribution function is used for approximating the wind speed, which is given as the disturbance input to the plant. The adaptive control algorithm is implemented to 2 MW and 5 MW wind turbines to test the robustness of the controller for varying parameters. The simulation is carried out using MATLAB/Simulink for three cases, namely pitch control, torque control, and the combined case. A case study is done to validate the proposed adaptive control using real wind speed data. In all the cases, the results indicate that the rotor speed follows the reference speed and show that the designed controller gives a satisfactory performance under varying operating conditions and parameter variations.

Wind Speed Dependency of Low-Frequency Vibration Levels in Full-Scale Wind Turbines

2015 ◽  
Vol 137 (6) ◽  
Author(s):  
Xavier Escaler ◽  
Toufik Mebarki
Keyword(s):  
Wind Speed ◽  
Wind Turbines ◽  
High Speed ◽  
Wind Farm ◽  
Low Frequency ◽  
Average Frequency ◽  
Operating Conditions ◽  
Positive Slope ◽  
Low Frequency Vibration ◽  
Linear Fit

A series of continuous vibration measurements in 14 upwind wind turbines of the same model and belonging to the same wind farm have been conducted. The data were acquired over a period lasting approximately half a year. The tower axial vibration acceleration has been monitored in the frequency band from 0 to 10 Hz with an accelerometer mounted on the gearbox casing between the intermediate and the high-speed shafts. It has been observed that the average frequency spectrum is dominated by the blade passing frequency in all the wind turbines. The evolution of the vibration magnitudes over the entire range of operating conditions is also very similar for all the wind turbines. The root-mean-square (rms) acceleration value has been correlated with the wind speed, and it has been found that a linear fit with a positive slope is a useful model for prediction purposes.

Dynamic Stress Analysis on Barrel Considering the Radial Effect of Propellant Gas Flow

2018 ◽  
Vol 141 (1) ◽  
Author(s):  
Qingbo Yu ◽  
Guolai Yang
Keyword(s):  
Stress Response ◽  
Dynamic Response ◽  
Contact Force ◽  
Gas Flow ◽  
Dynamic Stress ◽  
Gas Pressure ◽  
Operating Conditions ◽  
Dynamic Responses ◽  
Stress Distributions ◽  
Strength Theory

The stress response of an artillery barrel when fired is principally due to loading from gas pressure and contact force with the projectile. This paper reports a research project in which a dynamic model of a barrel and a projectile was established in order to investigate the stress response of an artillery barrel. Calculations of propellant gas pressure, in part determined by the position of the moving projectile, were carried out using user-defined subroutines developed in the abaqus/explicit software. Numerical simulations of the dynamic loading process of the barrel were carried out to examine the radial effects of gas pressures. Using this methodology, the evolution of barrel stress distributions was simulated, providing a visualized representation of the barrel's dynamic response. The calculated dynamic stress due to projectile contact alone can reach a peak value of 181 MPa, reflecting the significant effect of contact force on the barrel's dynamic response. Following this, the effect of propellant combustion on the dynamic response was explored, and the results obtained showed that higher initial temperatures produced more pronounced dynamic responses. Moreover, significant differences in stress distributions computed for the barrel revealed deficiencies in the static strength theory for evaluating the operating conditions, due in part to the omission of contact force and other dynamic effects. This paper proposes an alternative investigative approach for evaluating the dynamic stress response of barrels during the initial phases of the ballistics process, and provides information that should lead to updates and improvements of barrel strength theory, ultimately leading to better predictions of firing reliability and operator safety.

SCADA data as a powerful tool for early fault detection in wind turbine gearboxes

2020 ◽  
pp. 0309524X2096941
Author(s):  
Khaled Taha Abd-Elwahab ◽  
Ali Ahmed Hassan
Keyword(s):  
Wind Speed ◽  
Fault Detection ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Comparison Method ◽  
Operating Conditions ◽  
Tree Model ◽  
Aggregated Model ◽  
Early Fault Detection ◽  
Abnormal Performance

The different operating conditions of wind turbines pose great challenges for efficient and reliable fault detection. Therefore, a good analysis of wind turbine data is essential in assessing the state of the wind turbines, since the traditional threshold cannot provide a timely warning as it indicates that the malfunction has already occurred. This paper presents a new method for analyzing the actual data of the turbines, using aggregated model consisting of the neighborhood comparison method, K-means clustering and decision tree model to diagnose faults. The wind speed of the adjacent turbines is compared with each other, then other parameters of the same wind speed are also compared with each other. The purpose of comparison is that, the wind turbines which are similar in wind speed are similar in performance as well. This approach helps us to discover the abnormal data for turbine performance with in the normal operating range. The abnormal performance of any turbine destroys the similarity relationship between its data and the neighboring unit’s data. The main advantage of this approach is the possibility to detect the beginning of abnormal performance in real time, a case study using real SCADA data is used to validate this approach, which demonstrates its effectiveness and advantages.

scholarly journals Study of Dynamic Response Characteristics of the Wind Turbine Based on Measured Power Spectrum in the Eyewall Region of Typhoons

2019 ◽  
Vol 9 (12) ◽  
pp. 2392
Author(s):  
Ran Han ◽  
Long Wang ◽  
Tongguang Wang ◽  
Zhiteng Gao ◽  
Jianghai Wu
Keyword(s):  
Power Spectrum ◽  
Dynamic Response ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Beam Theory ◽  
Dynamic Responses ◽  
Limit Values ◽  
Actual Measurement ◽  
Fluctuating Wind ◽  
Measured Power

The present research envisages a method for calculating the dynamic responses of the wind turbines under typhoon. The measured power spectrum and inverse Fourier transform are used to generate the fluctuating wind field in the eyewall of the typhoon. Based on the beam theory, the unsteady aerodynamic model and the wind turbine dynamic model are coupled to calculate the dynamic response. Furthermore, using this method, the aeroelastic responses of a 6 MW wind turbine at different yaw angles are studied, and a 2 MW wind turbine are also calculated to verify the applicability of the results for different sizes of wind turbines. The results show that the turbulence characteristics of the fluctuating wind simulated by the proposed method is in good agreement with the actual measurement. Compared with the results simulated by the recommended power spectrum like the Kaimal spectrum, the energy distribution and variation characteristics simulated by the proposed method represent the real typhoon in a superior manner. It is found that the blade vibrates most violently at the inflow yaw angle of 30 degrees under the coupled effect of the aerodynamic, inertial and structural loads. In addition, the load on the tower exceeds the design limit values at the yaw angles of both 30 degrees and 120 degrees.

Output wind power curve optimization based on design wind speed concept

2020 ◽  
pp. 0309524X1990100
Author(s):  
Cherif Khelifi ◽  
Fateh Ferroudji
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Power ◽  
Wind Turbines ◽  
Wind Farms ◽  
Operating Conditions ◽  
Speed Ratio ◽  
Power Curve ◽  
Design Wind Speed

The output wind power curve versus wind speed is the most important characterization parameter of wind turbines. It allows quantifying and analyzing the design performances of wind turbines, monitoring its database, and controlling the operation modes and manufacturing products. Wind power curve can be used to select the proper rotor size to estimate the potential of wind energy at candidate wind sites and to assess the control device of the operating conditions. Developing model strategies for wind farms has the basic objectives such as the optimization of wind power produced and the minimization of dynamic loads to provide the best quality of output wind power at reasonable cost. Optimal design of wind turbines requires maximum-closing to the cubical output wind power curve despite technical and economic considerations. This study aims to determine the design wind speed of a wind turbine based on modeling-optimization of the output wind power curve under certain working conditions. The procedure is applied to a unit wind turbine in Gamesa wind farm (G52/850, 10.2 MW, http://www.thewindpower.net ) connected to an electrical grid located in south-west Algeria and extrapolated for other windy sites in Algeria. From simulation results, the design wind speed to inlet wind speed ratio [Formula: see text] increased from 0.35 to 7.68 once [Formula: see text] increased from 0.001 to 2.9999. Consequently, the output wind power predicted an increase of about 17.7% and an annual specific wind energy factor of about 2.55%–4% than nominal value given by the manufacturer, reducing the unit average cost of the electricity, generated by wind farms, by about 18.75%.

Sign in / Sign up

Export Citation Format

Share Document