scholarly journals A Study of Structural and Photoluminescence for Al-Doped CdO Thin Films

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Bong Ju Lee ◽  
Jin Jeong
Keyword(s):  
Thin Films ◽  
Room Temperature ◽  
Deposition Time ◽  
Processing Parameters ◽  
Photoluminescence Spectra ◽  
X Ray Diffraction ◽  
Light Emitting ◽  
X Ray ◽  
Grain Sizes ◽  
Cdo Thin Films

Al-doped CdO thin films were prepared by radio frequency magnetron sputtering at different deposition time and substrate temperature. X-ray diffraction showed that the changes in the intensities of the (200), (220), and (311) planes followed a similar trend with increase in deposition time. The surface of the thin film was examined by scanning electron microscopy. Grain sizes of Al-doped CdO thin films increased significantly with increasing deposition time. The film thicknesses were 0.09, 0.12, 0.20, and 0.225 μm for the deposition times of 1, 2, 3, and 4 h, respectively. The photoluminescence spectra of the Al-doped CdO thin films were measured at room temperature. The photoluminescence wavelength changed in the sequence, green, blue, green, and blue, with increasing deposition time, which indicates that blue light emitting films can be fabricated by adjusting the processing parameters.

Characterization of Nd:Y3Al5O12 Thin Films Prepared by Electron Beam Evaporation Deposition

2013 ◽  
Vol 320 ◽  
pp. 150-154
Author(s):  
Hao Ren ◽  
Qun Zeng ◽  
Xi Hui Liang
Keyword(s):  
Thin Films ◽  
Electron Beam ◽  
Room Temperature ◽  
Electron Beam Evaporation ◽  
Photoluminescence Spectra ◽  
X Ray Diffraction ◽  
X Ray ◽  
Surface Morphologies ◽  
Ingaas Detector

Nd:YAG thin films have been prepared on Si (100) substrates by electron beam evaporation deposition. The surface morphologies, crystalline phases and optical properties of the Nd:YAG thin films were characterized by x-ray diffraction, scanning electron microscopy, photoluminescence spectroscopy, and spectrophotometer. The crystallization of Nd:YAG thin films was improved after annealing at 1100 °C for 1 hour in vacuum. Excited by a Ti:sapphire laser at 808 nm, photoluminescence spectra of Nd:YAG thin films were measured at room temperature, and the transition of4F3/24I11/2of Nd3+in YAG in the region of 1064 nm were detected by a liquid nitrogen cooled InGaAs detector array.

scholarly journals Effect of Annealing Temperature on Physical Properties of Indium Doped Cadmium Oxide Thin Films

2015 ◽  
Vol 11 (4) ◽  
pp. 3475-3481 ◽  
Author(s):  
Jinan A. Abd ◽  
Enas M. Al-Robayi ◽  
Zainab J. Shanan ◽  
Nadir F. Habubi
Keyword(s):  
Thin Films ◽  
Optical Transmission ◽  
Annealing Temperature ◽  
Cadmium Oxide ◽  
Optical And Electrical Properties ◽  
Photoluminescence Spectra ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cdo Thin Films ◽  
Cdo Films

     Nanostructured indium doped CdO thin films were prepared by spray pyrolysis on glass substrate and annealed at 200-400 ᵒC for 1 hour. The structural, optical, and electrical properties of prepared films were studied using different techniques such as optical transmission, photoluminescence, X-ray diffraction, and Hall measurement. X-ray analysis shows that the In doped CdO films are preferentially orientated along (111) crystallographic directions. Increasing of annealing temperature increases the films packing density and reorient the crystallites along (1 1 1) plane.  The optical transmissions of all annealed films decreased with increasing annealing temperature. An increasing in the absorbance and photoluminescence spectra with increasing annealing temperature was denoted in all films. The band gap value of CdO:4%In equals to 2.5 eV and it decreases with annealing temperature and reaches of 2.45 eV for 400°C. The resistivity of annealed films decreased as annealing temperature increased. While high conductivity achieved in the present study is found to be 11.37 ×102 (Ω.cm)-1 for annealing at 400°C. 

scholarly journals Structural and Enhanced Optical Properties of Stabilized γ‒Bi2O3 Nanoparticles: Effect of Oxygen Ion Vacancies

Nanomaterials ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 1023 ◽  
Author(s):  
Ashish Chhaganlal Gandhi ◽  
Chia-Liang Cheng ◽  
Sheng Yun Wu
Keyword(s):  
Room Temperature ◽  
Excess Oxygen ◽  
Ambient Atmosphere ◽  
Photoluminescence Spectra ◽  
X Ray Diffraction ◽  
X Ray ◽  
Band Emission ◽  
Oxygen Ion ◽  
Integrated Intensity ◽  
Effect Of Oxygen

We report the synthesis of room temperature (RT) stabilized γ–Bi2O3 nanoparticles (NPs) at the expense of metallic Bi NPs through annealing in an ambient atmosphere. RT stability of the metastable γ–Bi2O3 NPs is confirmed using synchrotron radiation powder X-ray diffraction and Raman spectroscopy. γ–Bi2O3 NPs exhibited a strong red-band emission peaking at ~701 nm, covering 81% integrated intensity of photoluminescence spectra. Our findings suggest that the RT stabilization and enhanced red-band emission of γ‒Bi2O3 is mediated by excess oxygen ion vacancies generated at the octahedral O(2) sites during the annealing process.

Structure and Conductivity of Iodine-Doped C60 Thin Films

1994 ◽  
Vol 359 ◽  
Author(s):  
Jun Chen ◽  
Haiyan Zhang ◽  
Baoqiong Chen ◽  
Shaoqi Peng ◽  
Ning Ke ◽  
...  
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Room Temperature ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
Temperature Conductivity ◽  
Room Temperature Conductivity ◽  
X Ray ◽  
Thermally Activated ◽  
Order Of Magnitude

ABSTRACTWe report here the results of our study on the properties of iodine-doped C60 thin films by IR and optical absorption, X-ray diffraction, and electrical conductivity measurements. The results show that there is no apparent structural change in the iodine-doped samples at room temperature in comparison with that of the undoped films. However, in the electrical conductivity measurements, an increase of more that one order of magnitude in the room temperature conductivity has been observed in the iodine-doped samples. In addition, while the conductivity of the undoped films shows thermally activated temperature dependence, the conductivity of the iodine-doped films was found to be constant over a fairly wide temperature range (from 20°C to 70°C) exhibiting a metallic feature.

Synthesis of CaWO4:(Eu3+,Tb3+) Thin Films by a Two-Step Method at Room Temperature

2013 ◽  
Vol 710 ◽  
pp. 170-173
Author(s):  
Lian Ping Chen ◽  
Yuan Hong Gao
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Phase Composition ◽  
Room Temperature ◽  
Electrochemical Techniques ◽  
Luminescent Properties ◽  
X Ray Diffraction ◽  
Step Method ◽  
X Ray ◽  
Rare Earth Doped

It is hardly possible to obtain rare earth doped CaWO4thin films directly through electrochemical techniques. A two-step method has been proposed to synthesize CaWO4:(Eu3+,Tb3+) thin films at room temperature. X-ray diffraction, energy dispersive X-ray analysis, spectrophotometer were used to characterize their phase, composition and luminescent properties. Results reveal that (Eu3+,Tb3+)-doped CaWO4films have a tetragonal phase. When the ratio of n (Eu)/n (Tb) in the solution is up to 3:1, CaWO4:(Eu3+,Tb3+) thin film will be enriched with Tb element; on the contrary, when the ratio in the solution is lower than 1:4, CaWO4:(Eu3+,Tb3+) thin film will be enriched with Eu element. Under the excitation of 242 nm, sharp emission peaks at 612, 543, 489 and 589 nm have been observed for CaWO4:(Eu3+,Tb3+) thin films.

Long-term Room Temperature Instability in Thermal Conductivity of InGaZnO Thin Films

MRS Advances ◽  
2016 ◽  
Vol 1 (22) ◽  
pp. 1631-1636 ◽  
Author(s):  
Boya Cui ◽  
D. Bruce Buchholz ◽  
Li Zeng ◽  
Michael Bedzyk ◽  
Robert P. H. Chang ◽  
...  
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Room Temperature ◽  
Storage Time ◽  
Laser Deposition ◽  
Low Oxygen ◽  
X Ray Diffraction ◽  
3Ω Method ◽  
X Ray

ABSTRACTThe cross-plane thermal conductivities of InGaZnO (IGZO) thin films in different morphologies were measured on three occasions within 19 months, using the 3ω method at room temperature 300 K. Amorphous (a-), semi-crystalline (semi-c-) and crystalline (c-) IGZO films were grown by pulsed laser deposition (PLD), followed by X-ray diffraction (XRD) for evaluation of film quality and crystallinity. Semi-c-IGZO shows the highest thermal conductivity, even higher than the most ordered crystal-like phase. After being stored in dry low-oxygen environment for months, a drastic decrease of semi-c-IGZO thermal conductivity was observed, while the thermal conductivity slightly reduced in c-IGZO and remained unchanged in a-IGZO. This change in thermal conductivity with storage time can be attributed to film structural relaxation and vacancy diffusion to grain boundaries.

Formation of ZnO Doped with Mn Thin Film by Electrodeposition and Magnetic Behaviour.

2005 ◽  
Vol 879 ◽  
Author(s):  
M. Abid ◽  
C. Terrier ◽  
J-P Ansermet ◽  
K. Hjort
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Room Temperature ◽  
Magnetic Behaviour ◽  
Spectroscopic Methods ◽  
X Ray Diffraction ◽  
X Ray ◽  
Doped Zno ◽  
Mn Doped ◽  
Weak Ferromagnetic

AbstractFollowing the theory, ferromagnetism is predicted in Mn- doped ZnO, Indeed, ferromagnetism above room temperature was recently reported in thin films as well as in bulk samples made of this material. Here, we have prepared Mn doped ZnO by electrodeposition. The samples have been characterized by X-ray diffraction and spectroscopic methods to ensure that the dopants are substitutional. Some samples exhibit weak ferromagnetic properties at room temperature, however to be useful for spintronics this material need additional carriers provided by others means.

scholarly journals Optimization of Chemical Bath Deposited Mercury Chromium Sulphide Thin Films on Glass Substrate

2013 ◽  
Vol 2013 ◽  
pp. 1-4
Author(s):  
H. B. Patil ◽  
S. V. Borse
Keyword(s):  
Thin Films ◽  
Glass Substrate ◽  
Deposition Time ◽  
Growth Parameters ◽  
Complexing Agent ◽  
X Ray Diffraction ◽  
X Ray ◽  
Edax Analysis ◽  
Cubic Structure ◽  
Semiconducting Thin Films

Semiconducting thin films of ternary () have been deposited on glass substrate by the simple and economical chemical bath deposition method. We report the deposition and optimization of the solution growth parameters such as temperature, complexing agent, thiourea, and deposition time that maximizes the thickness of the deposited thin film. The X-ray diffraction deposited thin films having cubic structure. The thin films were uniform and adherent to substrate. The composition was found homogeneous and stoichiometric by EDAX analysis.

scholarly journals Structural and Magnetic Properties of FePd Thin Film Synthesized by Electrodeposition Method

Materials ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1454
Author(s):  
Gabriele Barrera ◽  
Federico Scaglione ◽  
Matteo Cialone ◽  
Federica Celegato ◽  
Marco Coïsson ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Magnetic Properties ◽  
Deposition Time ◽  
Magnetic Measurements ◽  
X Ray Diffraction ◽  
X Ray ◽  
Fundamental Properties ◽  
Magnetic Features ◽  
Application Fields

Bimetallic nanomaterials in the form of thin film constituted by magnetic and noble elements show promising properties in different application fields such as catalysts and magnetic driven applications. In order to tailor the chemical and physical properties of these alloys to meet the applications requirements, it is of great importance scientific interest to study the interplay between properties and morphology, surface properties, microstructure, spatial confinement and magnetic features. In this manuscript, FePd thin films are prepared by electrodeposition which is a versatile and widely used technique. Compositional, morphological, surface and magnetic properties are described as a function of deposition time (i.e., film thickness). Chemical etching in hydrochloric acid was used to enhance the surface roughness and help decoupling crystalline grains with direct consequences on to the magnetic properties. X-ray diffraction, SEM/AFM images, contact angle and magnetic measurements have been carried out with the aim of providing a comprehensive characterisation of the fundamental properties of these bimetallic thin films.

Sign in / Sign up

Export Citation Format

Share Document