scholarly journals Distribution of Heavy Metals in the Soils Associated with the Commonly Used Pesticides in Cotton Fields

Scientifica ◽  
2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Saadia Rashid Tariq ◽  
Musharaf Shafiq ◽  
Ghayoor Abbas Chotana

Agricultural soils contain both heavy metals and pesticides originating from various agricultural practices. It is quite important to study the relationships between these two classes of compounds. To accomplish this, 52 soil samples were collected from cotton fields and analyzed for their metal contents (Ni, Cu, Co, Pb, Cr, and Cd) and levels of most commonly used pesticides (imidacloprid, acetamiprid, and emamectin). FAAS was used for metal estimation and the pesticides were determined by HPLC equipped with UV detector. The results of the study revealed slightly enhanced levels of Ni and Cd in these samples while the rest of the metals were present within tolerable range. Acetamiprid residues in soil were strongly positively correlated with Cu and negatively correlated with Cr. Similarly, imidacloprid in soil was negatively correlated with Ni. Thus it was evidenced that Cu stabilizes acetamiprid while Cr and Ni facilitate the degradation of acetamiprid and imidacloprid in the soil.

2016 ◽  
Vol 46 (4) ◽  
pp. 391-400 ◽  
Author(s):  
Laércio Santos Silva ◽  
◽  
Izabel Cristina de Luna Galindo ◽  
Clístenes Williams Araújo do Nascimento ◽  
Romário Pimenta Gomes ◽  
...  

ABSTRACT Heavy metals are naturally found in soils, but their levels may increase as a result of anthropogenic actions. This study aimed at determining the concentrations of Cd, Cu, Mn, Ni, Pb and Zn in Yellow Latosol from vegetable crops areas, as well as the influence of the cultivation and position in the landscape on the accumulation of these elements. Soil samples were collected from five farming areas and four areas with natural vegetation, which served as a reference. Soil was collected along the planting rows from three transect positions (upper, middle and lower sections of the slope), as well as from the upper portion of forest areas, at three depths (0.0-0.10 m, 0.10-0.30 m and 0.30-0.60 m). The results from the chemical analyses indicated that Cd, Cu, Mn, Pb and Zn levels in the soil increased as a result of cultivation. Only Cd and Cu concentrations were above the quality reference values for the Pernambuco State. The multivariate analysis techniques used were efficient at separating the environments and at differentiating the origin of the metals. Soils from forest areas were clearly separated from croplands, demonstrating the effect of agricultural practices on the metal contents in the soils. The principal component analysis indicated a predominantly anthropogenic origin (phosphate fertilizing) for Cd, in more superficial soil samples.


2009 ◽  
Vol 66 (3) ◽  
pp. 361-367 ◽  
Author(s):  
Gustavo Souza Valladares ◽  
Otávio Antônio de Camargo ◽  
José Ruy Porto de Carvalho ◽  
Alessandra Maria Cia Silva

Agricultural management with chemicals may contaminate the soil with heavy metals. The objective of this study was to apply Principal Component Analysis and geoprocessing techniques to identify the origin of the metals Cu, Fe, Mn, Zn, Ni, Pb, Cr and Cd as potential contaminants of agricultural soils. The study was developed in an area of vineyard cultivation in the State of São Paulo, Brazil. Soil samples were collected and GPS located under different uses and coverings. The metal concentrations in the soils were determined using the DTPA method. The Cu and Zn content was considered high in most of the samples, and was larger in the areas cultivated with vineyards that had been under the application of fungicides for several decades. The concentrations of Cu and Zn were correlated. The geoprocessing techniques and the Principal Component Analysis confirmed the enrichment of the soil with Cu and Zn because of the use and management of the vineyards with chemicals in the preceding decades.


SOIL ◽  
2015 ◽  
Vol 1 (1) ◽  
pp. 23-33 ◽  
Author(s):  
S. Czarnecki ◽  
R.-A. Düring

Abstract. Essential and non-essential metals occur in soils as a result of weathering, industrial processes, fertilization, and atmospheric deposition. Badly adapted cultivation of agricultural soils (declining pH value, application of unsuitable fertilizers) can enhance the mobility of metals and thereby increase their concentrations in agricultural products. As the enrichment of metals in soils occurs over long time periods, monitoring of the long-term impact of fertilization is necessary to assess metal accumulation in agricultural soils. The main objective of this study was to test the effects of different mineral fertilizer variations on soil properties (pH, Corg, and cation exchange capacity (CEC)) and pseudo-total and mobile metal contents of soils after 14 years of fertilizer application and to determine residual effects of the fertilization 8 years after cessation of fertilizer treatment. Soil samples were taken from a field experiment which was carried out at four different locations (210, 260, 360, and 620 m above sea level) in Hesse, Germany. During the study, a significant decrease in soil pH and an evident increase in soil carbon content and cation exchange capacity with fertilization were determined. The CEC of the soils was closely related to their organic C contents. Moreover, pseudo- and mobile metal (Cd, Cu, Mn, Pb, Zn) contents in the soils increased due to application of 14 years of mineral fertilizer treatments (N, P, NP, and NPK) when compared to control plots. Eight years after termination of the fertilization in the soil samples taken from soil profiles of the fertilized plots (NPK) for monitoring the residual effects of the fertilizer application, a decrease of 82.6, 54.2, 48.5, 74.4, and 56.9% in pseudo-total Cd, Cu, Mn, Pb, and Zn contents, respectively, was determined.


2002 ◽  
Vol 11 (4) ◽  
pp. 285-300 ◽  
Author(s):  
V. MÄNTYLAHTI ◽  
P. LAAKSO

Increasing concentrations of arsenic and heavy metals in agricultural soils are becoming a growing problem in industrialized countries. These harmful elements represent the basis of a range of problems in the food chain, and are a potential hazard for animal and human health. It is therefore important to gauge their absolute and relative concentrations in soils that are used for crop production. In this study the arsenic and heavy metal concentrations in 274 mineral soil samples and 38 organogenic soil samples taken from South Savo province in 2000 were determined using the aqua regia extraction technique. The soil samples were collected from 23 farms.The elements analyzed were arsenic, cadmium, chromium, copper, mercury, nickel, lead and zinc. The median concentrations in the mineral soils were:As 2.90 mg kg –1, Cd 0.084 mg kg –1, Cr 17.0 mg kg –1, Cu 13.0 mg kg –1, Hg 0.060 mg kg –1, Ni 5.4 mg kg –1, Pb 7.7 mg kg –1, Zn 36.5 mg kg –1. The corresponding values in the organogenic soils were:As 2.80 mg kg –1, Cd 0.265 mg kg –1, Cr 15.0 mg kg –1, Cu 29.0 mg kg –1, Hg 0.200 mg kg –1, Ni 5.9 mg kg –1, Pb 11.0 mg kg –1, Zn 25.5 mg kg –1. The results indicated that cadmium and mercury concentrations in the mineral and organogenic soils differed. Some of the arsenic, cadmium and mercury concentrations exceeded the normative values but did not exceed limit values. Most of the agricultural fields in South Savo province contained only small amounts of arsenic and heavy metals and could be classified as “Clean Soil”. A draft for the target values of arsenic and heavy metal concentrations in “Clean Soil” is presented.;


Author(s):  
Usman Rilwan ◽  
Auta Abdullahi Abbas ◽  
Hudu Abdulrahman

Absorption of heavy metals through swampy agricultural soils may have serious consequences on human health. Present study determined the levels of Chromium (Cr), Nickel (Ni), Copper (Cu), Zinc (Zn), Arsenic (As), Cadmium (Cd) and Lead (Pb) using X- Ray Spectrometry in 10 swampy agricultural soils. The result of this study revealed that, the heavy metals with their respective concentrations (Cr (278.1), Ni (462.1), Cu (314.1), Zn (502.8), As (13.5), Cd (524.5) and Pb (295.5)) were found in the soil samples in mg/kg. It also pointed out that the concentration of the heavy metals in the all soil samples for all locations in decreasing order was Cd > Zn >Ni > Cu >Pb > Cr >As. The concentration in swampy agricultural soils from Kokona was obviously higher than the safe limit set by the regulatory bodies which may be because of the geological activities in the studied area. Hence, heavy metals accumulation in swampy agricultural soils is a big concern in Kokona where people’s daily meal largely contains rice or rice based products which are mostly cultivated in swampy agricultural soils.


2020 ◽  
Author(s):  
Anne Karine Boulet ◽  
Adelcia Veiga ◽  
Carla Ferreira ◽  
António Ferreira

<p>Conservation of agriculture soils is a topic of major concern, namely through the increase of soil organic matter. SoilCare project (https://www.soilcare-project.eu/) aims to enhance the quality of agricultural soils in Europe, through the implementation and testing of Soil Improving Cropping Systems in 16 study sites. In Portugal, the application of urban sewage sludge amendments in agriculture soils has been investigated. However, this application is a sensitive topic, due to the risk of long term accumulation of heavy metals and consequent contamination of the soil. The recent Portuguese legislation (Decret-Law 103/2015) is more restrictive than the precedent one (Decret-Law 276/2009) in terms of maximum concentrations of heavy metals in agricultural soils. The analytical quantification of heavy metals, however, raises some methodological questions associated with soil sample pre-treatment, due to some imprecisions in standard analytical methods. For example, the ISO 11466 regarding the extraction in Aqua Regia provides two pre-treatment options: (i) sieve the soil sample with a 2 mm mesh (but if mass for analyses is <2g, mill and sieve the sample <250µm is required), or (ii) mill and sieve the soil sample through a 150µm mesh. On the other hand, the EN 13650 requests soil samples to be sieved at 500µm. Since heavy metals in the soil are usually associated with finer particles, the mesh size used during the pre-treatment of soil samples may affect their quantification.</p><p>This study aims to assess the impact of soil particle size on total heavy metal concentrations in the soil. Soil samples were collected at 0-30cm depth in an agricultural field with sandy loam texture, fertilized with urban sludge amendment for 3 years. These samples were then divided in four subsamples and sieved with 2mm, 500µm, 250µm and 106µm meshes (soil aggregates were broken softly but soil wasn’t milled). Finer and coarser fractions were weighted and analyzed separately. Heavy metals were extracted with Aqua Regia method, using a mass for analyze of 3g, and quantified by atomic absorption spectrophotometer with graphite furnace (Cd) and flame (Cu, Ni, Pb, Zn and Cr).</p><p>Except for Cu, heavy metals concentrations increase linearly with the decline of the coarser fraction. This means that analyzing heavy metals content only in the finest fractions of the soil leads to an over estimation of their concentrations in the total soil. Results also show that coarser fractions of soil comprise lower, but not negligible, concentrations of heavy metals. Calculating heavy metal concentrations in the soil based on the weighted average of both fine and coarse fractions and associated concentrations, provide similar results to those driven by the analyses of heavy metals in the <2mm fraction. This indicates that milling and analyzing finer fractions of the soil did not influence the quantification of heavy metals in total soil. Clearer indications on analytical procedures should be provided in analytical standards, in order to properly assess heavy metal concentrations and compare the results with soil quality standards legislated.  </p>


Toxics ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 53 ◽  
Author(s):  
Ahmed A. Al-Taani ◽  
Yousef Nazzal ◽  
Fares M. Howari ◽  
Jibran Iqbal ◽  
Nadine Bou Orm ◽  
...  

The Liwa area is a primary food production area in the United Arab Emirates (UAE) and has intensively been used for agriculture. This study investigates the pollution levels with heavy metals in agricultural soils from the Liwa area. Thirty-two soil samples were analyzed for Mn, Zn, Cr, Ni, Cu, Pb, Cd, Co, and As. Results revealed that heavy metal levels varied in the ranges 220.02–311.21, 42.39–66.92, 43.43–71.55, 32.86–52.12, 10.29–21.70, 2.83–8.84, 0.46–0.69, 0.03–0.37 mg/kg for Mn, Zn, Cr, Ni, Cu, Pb, Cd, Co, and As, respectively. All samples presented low As concentrations with an average of 0.01 mg/kg. The variations in bulk metal contents in the soil samples were related to multiple sources, including agrochemicals, atmospheric dust containing heavy metals, and traffic-related metals. Enrichment factor analysis indicates that Cd, Ni, Zn, and Cr were highly enriched in soils, and they could originate from non-crustal sources. Based on the geo-accumulation index (Igeo), the soil samples appeared uncontaminated with Mn, Cr, Zn, Pb, Co, As, Cu, uncontaminated to moderately contaminated with Ni and moderately contaminated with Cd. The contamination factors suggest low contamination, except for Ni, which showed moderate contamination. The average pollution load index (PLI) revealed unpolluted to low pollution of all soil samples. The ecological risk assessment (PERI) showed that all heavy metals posed a low risk, except for Cd which exhibited a high ecological risk.


2021 ◽  
Author(s):  
Jyoti Rani ◽  
Sudesh Chaudhary ◽  
Tripti Agarwal

Abstract The present study was conducted to assess heavy metals contamination in agricultural soils in the National Capital Region, Delhi. A total of 84 soil samples were collected from selected agricultural areas located near industries, national highways, state highways, Yamuna floodplain, residential complexes, and wastewater irrigated soils. Heavy metal concentrations (Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn), pH, and organic carbon (%) were analyzed in the collected soil samples. The average value of pH and organic carbon in the soil samples collected were 7.79±0.49 and 0.53±0.17 percent. Average concentrations of heavy metals in soils were found to be in the order of Fe> Al>Mn> Zn> Ni>Cr> Cu>Pb> Co> Cd with value as 14916.92 mg kg -1 , 13538.87 mg kg -1 , 277.16 mg kg -1 , 74.53 mg kg -1 , 35.34 mg kg -1 , 33.68 mg kg -1 , 22.94 mg kg -1 , 18.45 mg kg -1 , 1.88 mg kg -1 , and 0.92 mg kg -1 . A very high concentration of Fe (6640.09-32650.23 mg kg -1 ), Al (5631-27209.99 mg kg -1 ), Mn (73.8-735.72 mg kg -1 ), Zn (16.45-221.88 mg kg -1 ), Ni (7.63-192.63 mg kg -1 ), and Cr (9.65-127.21 mg kg -1 ) were recorded in agricultural soil samples. The average concentrations of Mn, Ni, and Zn in the soil samples were several times higher than their concentration in Indian natural background soils. A significant potential ecological risk has been noticed in nearly all the agricultural soil samples except for the samples collected nearby residential areas. The contamination factor has shown that most of the soil samples were moderately contaminated with Mn, Ni, Fe, and Cr and some soil samples were considerably to strongly contaminated with Cd, Zn, Pb, and Ni. Wastewater irrigated soils showed a moderate to a strong degree of accumulation of heavy metals (Cd, Ni, and Zn).


2021 ◽  
Vol 16 (3) ◽  
pp. 804-817
Author(s):  
Jyoti Rani ◽  
Tripti Agarwal ◽  
Sudesh Chaudhary

This study was conducted to assess heavy metals concentrations in agricultural soils in the National Capital Region, Delhi. A total of 84 soil samples were collected from selected agricultural areas located near industries, national highways, state highways, Yamuna floodplain, residential complexes, and wastewater irrigated soils. Heavy metal concentrations, pH, and organic carbon (%) were analyzed in the collected soil samples. The average value of pH, and organic carbon (%) in the soil samples were 7.79±0.49 and 0.53±0.17 percent respectively. Average concentrations of heavy metals (mg kg-1) in the agricultural soils were found in the order of Fe > Al > Mn > Zn > Ni > Cr > Cu > Pb > Co > Cd with value as 14916.92, 13538.87, 277.16, 74.53, 35.34, 33.68, 22.94, 18.45, 1.88, and 0.92 . The concentrations of Zn, Ni, and Mn reported in the present study were several times higher than their concentration in Indian natural background soils. A significant potential ecological risk has been noticed in nearly all the agricultural soil samples except for the samples collected nearby residential areas. The contamination factor has shown that most of the soil samples were moderately contaminated with Mn, Ni, Fe, and Cr and some soil samples were considerably to strongly contaminated with Zn, Pb, Cd, and Ni. Wastewater irrigated soils showed a moderate to a strong degree of accumulation of Zn, Cd, and Ni.


2009 ◽  
Vol 55 (No. 4) ◽  
pp. 167-172 ◽  
Author(s):  
P. Takáč ◽  
T. Szabová ◽  
Ľ. Kozáková ◽  
M. Benková

The heavy metal contents and their bioavailability were monitored in soils of Central Spiš region of SR. This area belongs to long term contaminated and hygienically loaded areas. Soil contamination by heavy metals is caused especially by ore mining, processing and treatment. Soil samples from the Central Spiš contained higher proportions of mobile forms which corresponded to the following sequence Pb > Zn > Cu, while for mobilizable forms the sequence of investigated metals was as follows: Cu > Zn > Pb. Soil pH is one of the parameters that affect significantly the share of bioavailable forms of metals. Higher proportions of mobile fractions of metals were detected in samples taken from soils with acidic pH. Statistical processing confirmed a relationship between the percentage share of lead and zinc in the mobile form and the level of pH/KCl, which was significant for Zn: <I>r</I> = –0.53. The relationships for lead and copper were insignificant.


Sign in / Sign up

Export Citation Format

Share Document