scholarly journals Different Clinical Features of Acral Abortive Hemangiomas

2017 ◽  
Vol 2017 ◽  
pp. 1-5 ◽  
Author(s):  
N. Vega Mata ◽  
J. C. López Gutiérrez ◽  
B. Vivanco Allende ◽  
M. S. Fernández García
Keyword(s):  
Surface Area ◽  
Vascular Malformation ◽  
Distal Part ◽  
Proximal Part ◽  
Total Surface Area ◽  
The Body ◽  
Dorsal Region ◽  
Glut 1 ◽  
Degrees Of Severity ◽  
Erythematous Patch

Some infantile hemangiomas called in literature “minimal or arrested growth hemangiomas” or “abortive hemangiomas” are present at birth and have a proliferative component equaling less than 25% of its total surface area. Often, they are mistaken for vascular malformation. We present five patients (three girls and two boys) with abortive hemangiomas diagnosed between January 2010 and December 2015 localized in acral part of the extremities. They were congenital lesions resembling precursor of hemangiomas but did not show proliferation phase. Immunohistochemical Glut-1 was performed in all of them as a way to confirm the abortive hemangioma diagnosis. The most common appearance was a reticulated erythematous patch with multiple fine telangiectasias on the surface. We remark that one of them presented a segmental patch with two different morphologies and evolutions. The proximal part showed pebbled patches of bright-red hemangioma and presented proliferation and the distal part with a reticulated network-like telangiectasia morphology remained unchanged. We detected lower half of the body preference and dorsal region involvement preference without ventral involvement. The ulceration occurred in three patients with two different degrees of severity.

The use of Body Surface Index as a Better Clinical Health indicators Compare to Body Mass Index and Body Surface Area for Clinical Application

2018 ◽  
pp. 131-136
Author(s):  
Shirazu I. ◽  
Theophilus. A. Sackey ◽  
Elvis K. Tiburu ◽  
Mensah Y. B. ◽  
Forson A.
Keyword(s):  
Surface Area ◽  
Body Surface Area ◽  
Clinical Application ◽  
Body Surface ◽  
Body Height ◽  
Health Indicators ◽  
The Body ◽  
Body Parameters ◽  
The Relationship ◽  
Individual Body

The relationship between body height and body weight has been described by using various terms. Notable among them is the body mass index, body surface area, body shape index and body surface index. In clinical setting the first descriptive parameter is the BMI scale, which provides information about whether an individual body weight is proportionate to the body height. Since the development of BMI, two other body parameters have been developed in an attempt to determine the relationship between body height and weight. These are the body surface area (BSA) and body surface index (BSI). Generally, these body parameters are described as clinical health indicators that described how healthy an individual body response to the other internal organs. The aim of the study is to discuss the use of BSI as a better clinical health indicator for preclinical assessment of body-organ/tissue relationship. Hence organ health condition as against other body composition. In addition the study is `also to determine the best body parameter the best predict other parameters for clinical application. The model parameters are presented as; modeled height and weight; modelled BSI and BSA, BSI and BMI and modeled BSA and BMI. The models are presented as clinical application software for comfortable working process and designed as GUI and CAD for use in clinical application.

scholarly journals Stratigraphic revision and reconstruction of the deep-sea fan of the Voirons Flysch (Voirons Nappe, Chablais Prealps)

2021 ◽  
Vol 114 (1) ◽  
Author(s):  
Jérémy Ragusa ◽  
Lina Maria Ospina-Ostios ◽  
Pascal Kindler ◽  
Mario Sartori
Keyword(s):  
Deep Sea ◽  
Distal Part ◽  
Accretionary Prism ◽  
Proximal Part ◽  
Late Eocene ◽  
Lithostratigraphic Units ◽  
Stratigraphic Record ◽  
Sea Fan ◽  
Stratigraphic Evolution ◽  
Depositional Setting

AbstractThe Voirons Flysch (Caron in Eclogae Geologicae Helvetiae 69:297–308, 1976), is a flysch sequence aggregated into the sedimentary accretionary prism of the Chablais and Swiss Prealps. Its palaeogeographic location is still debated (South Piemont or Valais realm). We herein present a stratigraphic revision of the westernmost unit of the former Gurnigel Nappe sensu Caron (Eclogae Geologicae Helvetiae 69:297–308, 1976): the Voirons Flysch. This flysch is subdivided into three lithostratigraphic units at the formation level (the Voirons Sandstone, the Vouan Conglomerate, the Boëge Marl), with an additional unit (Bruant Sandstone) of uncertain attribution, ranging from the early Eocene to probably the late Eocene. We further propose a new model of the depositional setting of the deep-sea of the Voirons Flysch based on palaeocurrent directions, the overall geometry and sedimentary features. This model depicts an eastward deflected deep-sea fan. The stratigraphic record of the proximal part of this fan is fairly complete in the Voirons area, whereas its most distal part is only represented by one small exposure of thinly bedded sandstones in the Fenalet quarry. The stratigraphic evolution of the Voirons Flysch shows two major disruptions of the detrital sedimentation at the transition between Voirons Sandstone—Vouan Conglomerate and Vouan Conglomerate—Boëge Marl. The cause of these disturbances has to be constrained in the framework of the palaeogeographic location of the Voirons Flysch.

scholarly journals A Facile One-Pot Approach to the Synthesis of Gd-Eu Based Metal-Organic Frameworks and Applications to Sensing of Fe3+ and Cr2O72− Ions

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1679
Author(s):  
Roberta Puglisi ◽  
Anna L. Pellegrino ◽  
Roberto Fiorenza ◽  
Salvatore Scirè ◽  
Graziella Malandrino
Keyword(s):  
Surface Area ◽  
Metal Organic Frameworks ◽  
3D Structure ◽  
Inorganic Ions ◽  
Total Surface Area ◽  
One Pot ◽  
Green Approach ◽  
Metal Organic ◽  
Ft Ir ◽  
Xrd Patterns

Gadolinium metal-organic frameworks (Gd-MOFs) and Eu-doped Gd-MOFs have been synthesized through a one-pot green approach using commercially available reagents. The 1,4-benzenedicarboxylic acid (H2-BDC) and 2,6-naphthalenedicarboxylic acid (H2-NDC) were chosen as ditopic organic linkers to build the 3D structure of the network. The Gd-MOFs were characterized using powder X-ray diffraction (XRD), FT-IR spectroscopy, field emission scanning electron microscopy (FE-SEM) and N2 adsorption–desorption analysis. The Gd-MOF structures were attributed comparing the XRD patterns, supported by the FT-IR spectra, with data reported in the literature for Ln-MOFs of similar lanthanide ionic radius. FE-SEM characterization points to the effect of the duration of the synthesis to a more crystalline and organized structure, with grain dimensions increasing upon increasing reaction time. The total surface area of the MOFs has been determined from the application of the Brunauer–Emmett–Teller method. The study allowed us to correlate the processing conditions and ditopic linker dimension to the network surface area. Both Gd-MOF and Eu-doped Gd-MOF have been tested for sensing of the inorganic ions such as Fe3+ and Cr2O72−.

NSAM-derived total surface area versus SMPS-derived “mobility equivalent” surface area for different environmentally relevant aerosols

2013 ◽  
Vol 66 ◽  
pp. 1-11 ◽  
Author(s):  
Megat-Azman Mokhtar ◽  
Rohan Jayaratne ◽  
Lidia Morawska ◽  
Mandana Mazaheri ◽  
Nic Surawski ◽  
...  
Keyword(s):  
Surface Area ◽  
Total Surface Area

Lepeophtheirus salmonis (Krøyer, 1837): second nauplius and copepodid locomotor appendages, surface areas and possible appendage functions

Crustaceana ◽  
2013 ◽  
Vol 86 (13-14) ◽  
pp. 1695-1710 ◽  
Author(s):  
Susan E. Allen ◽  
A. G. Lewis
Keyword(s):  
Body Position ◽  
Ventral Surface ◽  
Total Surface Area ◽  
The Body ◽  
Lepeophtheirus Salmonis ◽  
Sinking Rate ◽  
Surface Areas ◽  
Thoracic Legs ◽  
Two Stages ◽  
Suitable Location

Locomotor appendage-body relationships were used to examine whether swimming or reduction in sinking rate is the more important function in the second nauplius and copepodid stages of Lepeophtheirus salmonis (Krøyer, 1837). Except for the similarity in swimming appendage surface areas without setae, the appendages of the two stages are morphologically distinct. Although the nauplius is smaller than the copepodid it has long slender appendages that, with setae, provide greater total surface area than the paddle-shaped copepodid thoracic legs. Copepodid thoracic legs are more similar to those used for swimming by planktonic copepods although with more limited propulsion capability. Naupliar appendages project from the body while copepodid appendages can be folded against the ventral surface, improving hydrodynamic flow as well as body position after attachment to a host. Both copepodid and naupliar appendages are of sufficient size that they should provide escape velocities of more than 100 mm ⋅ s−1. The nature and display of the naupliar appendages suggest they could be used to reduce sinking rate by as much as 64%, reducing the need to swim to maintain a suitable location in the water. Although copepodid thoracic legs could reduce sinking rate by over 40%, their position on the ventral surface and the nature of other appendages suggests a more important use, for orientation and attachment once a host is located.

scholarly journals Regularities of Variation of the Red Blood Indices Characterizing the Respiratory Function of Blood in Selected Fish

2011 ◽  
Vol 56 (1-4) ◽  
pp. 35-48 ◽  
Author(s):  
Sebastian Maciak ◽  
Alina Kostelecka-Myrcha
Keyword(s):  
Surface Area ◽  
Oxygen Transport ◽  
Respiratory Function ◽  
Hemoglobin Concentration ◽  
Total Surface Area ◽  
Great Variability ◽  
Blood Indices ◽  
Erythrocyte Surface ◽  
Area Unit ◽  
Counter Current

Regularities of Variation of the Red Blood Indices Characterizing the Respiratory Function of Blood in Selected FishThere is a large diversity of red blood indices determining oxygen transport ability in vertebrates. In fish this diversity is particularly large, probably due to the great variability in water environments, which impedes the possibility of finding and understanding general patterns. It has been assumed that in mammals, the measure determining the ability of a blood unit to transport oxygen is the ratio of hemoglobin concentration (HB) and total erythrocyte surface area (TSAE). It was also shown that both in mammals and birds the amount of hemoglobin per total surface area unit (Hb/TSAE) conditions maximum use of respiratory pigment in oxygen transport, in different physiological and environmental conditions. In order to check whether this regularity occurs in fish, red blood indices were analyzed in seven species of freshwater fish, differing noticeably in their biology and body mass in two seasons of the year. Notwithstanding this marked seasonal variability to the component variables together determining the total surface area of erythrocytes, the value for TSAE was found to differ in proportion to the higher or lower concentrations of HB. In consequence, the HB/TSAE ratio indicative of the maximal use of haemoglobin in the transport of oxygen was constant in all of the fish studied between analyzed seasons. This constancy - resembling that to be noted in birds - is most probably related to the counter-current gaseous exchange ongoing in the gills of fish.

The Structure, Development, and Operation of the Hinge Ligament of Ostrea edulis

1951 ◽  
Vol s3-92 (18) ◽  
pp. 129-140
Author(s):  
E. R. TRUEMAN
Keyword(s):  
Surface Area ◽  
Outer Layer ◽  
Tensile Strain ◽  
Central Position ◽  
Ostrea Edulis ◽  
Structure Development ◽  
Dorsal Region ◽  
Larval Stages ◽  
Adult Oyster

1. The ligamental structure of Ostrea edulis is briefly described. The ligament is situated between the valves of the shell immediately below the urtibo and may be divided into two main layers, the outer and the inner, the principal features of which appear to correspond with those of other bivalves. The outer layer is divided into anterior and posterior halves by the inner layer, which occupies a central position. 2. The axis (hinge or pivotal axis) about which the valves open is situated in the adult oyster along a line drawn through the outer layer and the upper part of the inner layer. When the valves are closed the ligament above this axis is subjected to a tensile strain andthat portion below to compression, the force s so produced causing the opening of the valves. An attempt has been made t o measure this force in relation to the surface area of the valves and it is found to be approximately 4.5 gm.mm./mm.2 This figure is comparable to those obtained when certain other species of bivalves are used. 3. Th eligament is shown to develop from the simple outer layer of the early larval stages, first by the addition of aninner layer and then by growth of this structure chiefly in a ventral direction. The initial dorsal region of the ligamentsoon degenerates and at the same time the pivotal axis moves ventrally between the valves, thus increasing in length. This method of growth is compared with that of an elongate external ligament and the mechanical implications are suggested.

Retrospective analysis of the appendiceal neoplasms: sampling technique may influence neoplasm detection

2021 ◽  
pp. postgradmedj-2021-141244
Author(s):  
Gizem Issin ◽  
Fatih Demir ◽  
Hasan Aktug Simsek ◽  
Diren Vuslat Cagatay ◽  
Mahir Tayfur ◽  
...  
Keyword(s):  
Retrospective Analysis ◽  
Distal Part ◽  
Histopathological Examination ◽  
Small Diameter ◽  
Sampling Technique ◽  
Proximal Part ◽  
Longitudinal Section ◽  
Appendiceal Neoplasms ◽  
Macroscopic Findings ◽  
Distal Section

Background and aimsAppendiceal neoplasms are uncommon entities that are usually determined incidentally during the histopathological examination. Different techniques used for the macroscopic sampling of appendectomy material may affect the determinating neoplasms.Materials and methodsH&E-stained slides of 1280 cases who underwent appendectomy between 2013 and 2018 were reviewed retrospectively for histopathological features.ResultsNeoplasms were determined in 28 cases (3.09%); 1 lesion was observed in the proximal part of the appendix, 1 covering the entire length from proximal to distal and 26 in the distal part. In the 26 cases that observed in the distal part, the lesion was seen on both sides of the longitudinal section of the distal appendix in 20 cases, while it was seen on only one distal longitudinal section in the remaining 6 cases.ConclusionThe vast majority of appendiceal neoplasms are seen in the distal part of the appendix, and, in some cases, neoplasms might be seen on only one side of the distal section. Sampling only one-half of the distal part of the appendix, where tumours are most often observed, could result in some neoplasms being missed. Therefore, sampling the whole distal part would be more beneficial to determine small diameter tumours that do not create macroscopic findings.

Vibration suppression investigation and parametric design of tri-axle straight heavy truck with pitch-resistant hydraulically interconnected suspension

2021 ◽  
pp. 107754632110396
Author(s):  
Fei Ding ◽  
Jie Liu ◽  
Chao Jiang ◽  
Haiping Du ◽  
Jiaxi Zhou ◽  
...  
Keyword(s):  
Surface Area ◽  
Dynamic Load ◽  
Pressure Loss ◽  
Vibration Suppression ◽  
Parametric Design ◽  
Suspension System ◽  
Loss Coefficient ◽  
The Body ◽  
Impedance Matrix ◽  
Pressure Loss Coefficient

The vibration suppression of the proposed pitch-resistant hydraulically interconnected suspension system for the tri-axle straight truck is investigated, and the vibration isolation performances are parametrically designed to achieve smaller body vibration and tire dynamic load using increased pitch stiffness and optimized pressure loss coefficient. For the hydraulic subsystem, the transfer impedance matrix method is applied to derive the impedance matrix. These hydraulic forces are incorporated into the motion equations of mechanical subsystem as external forces according to relationships between boundary flow and mechanical state vectors. In terms of the additional mode stiffness/damping and suspension performance requirements, the cylinder surface area, accumulator pressure, and damper valve’s pressure loss coefficient are comprehensively tuned with parametric design technique and modal analysis method. It is found the isolation capacity is heavily dependent on installation scheme and fluid physical parameters. Especially, the surface area can be designed for the oppositional installation to separately raise pitch stiffness without increasing bounce stiffness. The pressure loss coefficients are tuned with design of experiment approach and evaluated using all conflict indexes with normalized dimensionless evaluation factors. The obtained numerical results indicate that the proposed pitch-resistant hydraulically interconnected suspension system can significantly inhibit both the body and tire vibrations with decreased suspension deformation, and the tire dynamic load distribution among wheel stations is also improved.

Transport of Particle-Laden Fluids Through Fixed-Valve Micropumps

1999 ◽  
Author(s):  
Ling-Sheng Jang ◽  
Christopher J. Morris ◽  
Nigel R. Sharma ◽  
Ron L. Bardell ◽  
Fred K. Forster
Keyword(s):  
Surface Charge ◽  
Surface Area ◽  
Flow Rate ◽  
Pure Water ◽  
Maximum Flow ◽  
Total Surface Area ◽  
Maximum Flow Rate ◽  
Number Density ◽  
Polystyrene Microspheres ◽  
Negative Surface

Abstract Micropumps designed for the flow-rate range of 100–1000μl/min have been developed by a number of research groups. However, little data is available regarding the ability of various designs to directly transport liquids containing particles such as cells, microspheres utilized for bead chemistry, or contaminants. In this study the ability of pumps with no-moving-parts valves (NMPV) to transport particles was investigated. The results showed that a NMPV micropump was able to directly pump suspensions of polystyrene microspheres from 3.1 to 20.3μm in diameter. The pump functioned without clogging at microsphere number densities as high as 9000 particles/μl of suspension, which corresponded to over 90,000 particles per second passing through the pump at a flow rate of 600μl/min. Performance with polystyrene microspheres was the same as pure water up to the point of cavitation. Microspheres manufactured with negative surface charge cavitated less readily that other microspheres studied that were manufactured without surface charge. However, cavitation did not appear to be a function of microsphere size, total surface area or number density. Thus pumping polystyrene microspheres was found to be more affected by surface effects than by size, surface area or number density within the range of parameters considered. In the case of charged microspheres, the maximum flow rate was reduced by 30% compared to pure water whereas for uncharged microspheres the maximum flow rate was reduced by approximately 80%.

Sign in / Sign up

Export Citation Format

Share Document