scholarly journals Isolation and Thermal Stabilization of Bacteriocin Nisin Derived from Whey for Antimicrobial Modifications of Polymers

2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
Pavlina Holcapkova ◽  
Zuzana Kolarova Raskova ◽  
Martina Hrabalikova ◽  
Alexandra Salakova ◽  
Jan Drbohlav ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Polyethylene Glycol ◽  
High Performance ◽  
Thermal Stabilization ◽  
Nisin Production ◽  
Long Term Stability ◽  
Long Term Storage ◽  
The Stability ◽  
Term Storage

This work describes novel alternative for extraction of bacteriocin nisin from a whey fermentation media and its stabilization by using polyethylene glycol as matrix with high practical applicability. This product was compared with commercially available nisin product stabilized by sodium chloride and nisin extracted and stabilized by using ammonium sulfate and polysorbate 80. The stability of samples was tested by means of long-term storage at −18, 4, 25, and 55°C up to 165 days. The nisin content in the samples was determined by high-performance liquid chromatography and electrophoresis. In addition, effect of whey fortification with lactose on nisin production and antibacterial activity studied against Staphylococcus aureus was tested. Results show that stabilization by polyethylene glycol provides enhanced nisin activity at 55°C after 14 days and long-term stability at 25°C with keeping antibacterial activity.

scholarly journals Long-Term Stability of the Electronic Sensor Component of a Digital Pill System in Real-World Storage Settings

2021 ◽  
pp. 875512252098521
Author(s):  
Peter R. Chai ◽  
Georgia Goodman ◽  
Majo J. Bustamante ◽  
Yassir Mohamed ◽  
Jose Castillo-Mancilla ◽  
...  
Keyword(s):  
Clinical Trial ◽  
Gastric Fluid ◽  
Simulated Gastric Fluid ◽  
Once Daily ◽  
Long Term Stability ◽  
Long Term Storage ◽  
System Requirements ◽  
The Stability ◽  
Term Storage

Background: Digital pill systems comprise an ingestible sensor integrated into a gelatin capsule that overencapsulates medication allowing real-time measures of medication ingestion. These systems may improve the manner in which medication adherence can be assessed and supported. Objective: In this investigation, we tested the durability of the ingestible sensor as part of a clinical trial to measure the feasibility and acceptability of the system to measure adherence to once daily tenofovir disoproxil fumarate/emtricitabine (NCT03842436). Methods: Digital pills not dispensed during the study were stored in a pharmacy. Seventeen sensors were selected from digital pills stored for at least 12 months and activated in a simulated gastric environment. A radiofrequency spectrum analyzer and the reader device used in the clinical trial to capture ingestion events were used to measure activation of emitters. A passing evaluation was defined as an energized emitter within 30 minutes of immersion, ability to broadcast a signal for 10 minutes, and successful acquisition by the reader. Results: All ingestible sensors passed the stability test. Mean activation time in simulated gastric fluid was 3.33 minutes (SD = 1.47); emitters remained active for a mean of 47.72 minutes (SD = 1.78). These parameters matched guidelines defined in the ID-Cap system requirements for use in patients. Conclusions: Ingestible sensor components of the ID-Cap system were therefore stable after long-term storage.

Suitability of Flash Media for the Long-Term Storage of Information

2019 ◽  
Vol 40 (2) ◽  
pp. 97-122
Author(s):  
Joe Iraci
Keyword(s):  
High Capacity ◽  
Accelerated Ageing ◽  
Flash Storage ◽  
Long Term Stability ◽  
Long Term Storage ◽  
Storage Media ◽  
The Stability ◽  
To Receive ◽  
Term Storage

Abstract Flash storage media such as memory cards and USB flash drives are now commonly used to transfer and store information. However, little is known about the long-term stability of this type of media and this is a concern for archives and other institutions as they begin to receive content stored on these devices. In this study, the stabilities of a variety of different flash media were examined. The evaluation was performed by using accelerated ageing at 85 °C and 85 % relative humidity (RH) and 125 °C for ageing intervals up to 2000 hours. Measurements were also performed on samples previously subjected to accelerated ageing and then naturally aged for five years to verify the results from the accelerated ageing experiments. Overall, the stability of flash media was very good. For many of the samples, no read errors were encountered after accelerated or natural ageing. However, for several of the high capacity flash card samples and USB flash drives, significant decreases in read speed were noted. This can be problematic because it will eventually lead to read errors. It was established that for the USB samples this instability was likely attributed to the use of the less stable TLC (triple-level cell) memory chip.

scholarly journals Untargeted Metabolomics to Evaluate the Stability of Extra-Virgin Olive Oil with Added Lycium barbarum Carotenoids during Storage

Foods ◽  
2019 ◽  
Vol 8 (6) ◽  
pp. 179 ◽  
Author(s):  
Domenico Montesano ◽  
Gabriele Rocchetti ◽  
Lina Cossignani ◽  
Biancamaria Senizza ◽  
Luna Pollini ◽  
...  
Keyword(s):  
Olive Oil ◽  
High Performance ◽  
Virgin Olive Oil ◽  
Extra Virgin Olive Oil ◽  
Untargeted Metabolomics ◽  
Lycium Barbarum ◽  
Long Term Storage ◽  
The Stability ◽  
Term Storage

A carotenoid-rich extract from Lycium barbarum L. was added to extra virgin olive oil (EVOO), obtaining a carotenoid-enriched oil (EVOOCar). The oxidative stability of EVOO and EVOOCar was evaluated during long-term storage of 28 weeks at room temperature, by measuring some classical parameters (acidity and peroxide values, spectrophotometric coefficients, fatty acid composition) and the content of minor compounds (i.e., α-tocopherol and lutein). At the end of the storage, higher content (p < 0.01) of α-tocopherol in EVOOCar in respect to EVOO were observed. Zeaxanthin dipalmitate, the most abundant carotenoid compound of Goji berries, decreased slightly (p < 0.05) in EVOOCar until the end of the storage. In regard to polyphenols, an ultra-high-performance liquid chromatography coupled to quadrupole time-of-flight mass spectrometry (UHPLC/QTOF-MS) using untargeted metabolomics was carried out. This latter approach discriminated the two oil samples during long-term storage, allowing to identify also the phenolic classes most exposed to significant variations during storage (i.e., mainly lignans and flavones). Besides, the addition of Goji carotenoids preserved the stability of tyrosol equivalents in EVOOCar during long-term storage. These results highlighted that the enrichment of EVOO with a carotenoid-rich extract can improve the shelf-life and nutritional value of added-oil, protecting EVOO natural antioxidants during long-term storage.

scholarly journals Improved lyophilization conditions for long-term storage of bacteriophages

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Prasanth Manohar ◽  
Nachimuthu Ramesh
Keyword(s):  
Antibiotic Resistance ◽  
Polyethylene Glycol ◽  
Phage Therapy ◽  
Pharmaceutical Products ◽  
Long Term Storage ◽  
Pharmaceutical Applications ◽  
The Stability ◽  
Term Storage

Abstract Phage therapy is one of the promising alternatives to combat the increasing problem of antibiotic resistance. Lyophilization is used for the preparation of pharmaceutical products to improve their stability in long-term storage. The aim of this study was to improve the stability of lyophilized bacteriophages using different excipients. Three lytic bacteriophages Escherichia phage ECP311, Klebsiella phage KPP235 and Enterobacter phage ELP140 were subjected to lyophilization using six different excipients: glucose, sucrose, gelatin, mannitol, polyethylene glycol and sorbitol. The lyophilized phages were stored at 4 °C and 37 °C and rehydrated using biological saline to test their viability at 5 months interval up to 20 months. The results showed that the use of sucrose, gelatin and their combination was beneficial in maintaining the viability of phages post-lyophilization. When lyophilized phages were stored at 4 °C, their viability was maintained up to 20 months, but at 37 °C there was a reduction in activity after 10 months. This is one of the few studies to report the lyophilization of phage cocktails to have viability for up to 10 months. Our study identified promising lyophilization excipients to effectively lyophilize bacteriophages for pharmaceutical applications and long-term storage.

Stability and epimerisation behaviour of ergot alkaloids in various solvents

2008 ◽  
Vol 1 (1) ◽  
pp. 67-78 ◽  
Author(s):  
M. Hafner ◽  
M. Sulyok ◽  
R. Schuhmacher ◽  
C. Crews ◽  
R. Krska
Keyword(s):  
Degradation Products ◽  
Ergot Alkaloids ◽  
Carbonate Buffer ◽  
Long Term Storage ◽  
No Formation ◽  
Temperature Levels ◽  
The Stability ◽  
Extraction Mixture ◽  
Term Storage

In this paper the stability and degree of epimerisation of six major ergot alkaloids at three different temperature levels (-20 °C, +4 °C and +20 °C) over periods of 18 hours and six weeks is reported for the first time. The behaviour of ergometrine, ergocornine, ergocristine, α-ergocryptine, ergosine and ergotamine was thoroughly studied in seven solvents which are employed for the preparation of calibrants and extraction mixtures, respectively. Moreover, the stability of the ergot alkaloids was tested in different cereal extracts (rye, wheat, barley, oats) for 1, 2 and 6 days. Of the toxins tested, the ergopeptide-type toxins ergosine, ergotamine, ergocornine, α-ergocryptine and ergocristine showed similar behaviour patterns. The simple lysergic acid derivative ergometrine was more stable and showed hardly any epimerisation to ergometrinine, with the sum of both epimers remaining constant in all seven solvents. The ergopeptides tested show variable epimerisation tendencies, and were also less stable during six weeks at 20 °C. Ergosine showed the highest degree of epimerisation (43% after 6 weeks at 20 °C). In general, the order of epimerisation promotion was methanol/dichloromethane > acetonitrile/buffer > extraction mix > stabilising solution > acetonitrile >> chloroform. Long-term storage at room temperature can only be carried out in chloroform, which showed no epimerisation for all toxins even at 20 °C and also kept the sum of R and S forms constant, which indicates no formation of aci-epimers or other degradation products. Long-term storage of ergot alkaloids in acetonitrile, the most convenient solvent with respect to HPLC analysis, should be carried out at temperatures of -20 °C or below. The constant epimer ratio of all ergot alkaloids in the extraction mixture acetonitrile/ammonium carbonate buffer (200 mg/l; 92:8, v/v) during an HPLC run (18 hours) demonstrates the stability of the toxins in this extraction mixture.

The Carbonate-Hardening Lime Construction Material Properties Formation during their Long-Term Storage and Use under Normal Conditions

2019 ◽  
Vol 974 ◽  
pp. 187-194 ◽  
Author(s):  
Nikolay V. Lyubomirskiy ◽  
Tamara A. Bakhtina ◽  
Alexander S. Bakhtin ◽  
Sergey I. Fedorkin
Keyword(s):  
Construction Material ◽  
Construction Materials ◽  
Materials Properties ◽  
Long Term Storage ◽  
Efficiency Assessment ◽  
The Stability ◽  
Term Storage ◽  
Long Storage ◽  
Quality Construction

This paper presents the lime binding forced carbonate-hardening materials properties formation study and determins the stability of these properties during long-term storage and use under normal conditions. The tests showed these materials stability properties over time, confirming the strength and density growth of the test samples after long storage due to the calcium hydroxide recrystallization completion into calcium carbonate processes. Also, the results of the samples carbonate hardening study under natural conditions during 18 months are presented. An efficiency assessment of forced carbonate hardening as one of the methods of recycling technogenic CO2 in order to reduce its emissions in the atmosphere, and, in the result, to obtain high-quality construction materials has been made.

Synthesis Optimization of Guanidinium Dinitramide (GDN)

2020 ◽  
Vol 20 (11) ◽  
pp. 6855-6861
Author(s):  
Wooram Kim ◽  
Mijeong Park ◽  
Jong-Ki Jeon ◽  
Youngmin Jo
Keyword(s):  
Maximum Yield ◽  
Resonance Structure ◽  
Kcal Mole ◽  
Additional Advantage ◽  
Long Term Storage ◽  
Ft Ir ◽  
The Stability ◽  
Infrared Frequencies ◽  
Term Storage

Dinitramide anion [−N(NO2)2] salt composed of resonance structure is a plausible oxidizing agents, as efficient propellant. Among them, guanidinium dinitramide (GDN) is an organic compound improving the stability against moisture, as well long term storage. An additional advantage composed guanidinium ion is the reaction efficient via the decomposed by-product during pyrognostics, maximum yield of 99%. The types of GDN (GDN-I, II, III, IV, V) were synthesized using several starting material such as guanidine acetate, chloride, carbonate, nitrate and sulfate under hydrodeprivation. In this work, the intermediates formed in these processes were closely identified and their thermal properties, and chemical structure were examined. The absorption peaks by Fourier transform infrared (FT-IR) were found guanidinium infrared frequencies (3452, 3402, 3354, 3278, 1642 cm−1) and dinitramide infrared frequencies (3208, 1570, 1492, 1416, 1337, 1179, 1000 cm−1). The activation energy of GDN samples were obtained Ea = 53.26 Kcal/mole (GDN-I), 50.94 Kcal/mole (GDN-II), 52.34 Kcal/mole (GDN-III), 62.19 Kcal/mole (GDN-IV), 55.32 Kcal/mole (GDN-V) from exothermic at over 153°C.

Behavior of High Performance Concrete Under High Temperature (60-450°C) for Surface Long-Term Storage: Thermo-Hydro-Mechanical Residual Properties

2000 ◽  
Vol 663 ◽  
Author(s):  
C. Gallé ◽  
J. Sercombe ◽  
M. Pin ◽  
G. Arcier ◽  
P. Bouniol
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
High Performance ◽  
High Performance Concrete ◽  
Gas Permeability ◽  
Long Term Storage ◽  
Residual Properties ◽  
Term Storage

ABSTRACTAfter various thermal treatments (up to 450°C), residual thermo-hydro-mechanical (T-H-M) properties of two OPC high performance concretes (HPC) were analyzed in the context of surface long-term storage. Materials were prepared with silico-calcareous aggregates (standard HPC) and hematite aggregates (heavy HPC). The initial microstructural (porosity ≈10%) and transport (gas permeability ≈10-19 m2) properties are similar for both concretes. As far as the mechanical aspect is concerned, heavy HPC shows a higher compressive strength and elastic modulus than standard HPC (78 and 63 MPa, 81 and 49 GPa, respectively). Heavy HPC is also characterized by a higher thermal conductivity (7.3 W m-1 K-1 compared to 2.7 W m-1 K-1 for standard concrete). Results analysis show that thermo-hydro-mechanical damages are smaller for heavy HPC. Between 60 and 250°C, the elastic modulus and the compressive strength of standard HPC decrease by 40% and 16%, respectively. For heavy HPC, these parameters respectively decrease by 10% and 4%. A similar trend was observed for thermal conductivity evolution. Gas permeability and porosity data confirm the good behavior of heavy HPC. As a conclusion, hematite HPC seems to provide more interesting T-H-M residual properties than standard HPC. Limited thermal expansion and thermal gradients induced by hematite are probably responsible of this behavior.

Sign in / Sign up

Export Citation Format

Share Document