scholarly journals Development and Performance Test including Mechanical and Thermal of New Tenon Composite Block Masonry Walls

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Hui Su ◽  
Dongyue Wu ◽  
Mengying Shen ◽  
Wei Chen ◽  
Shilin Wang
Keyword(s):  
Thermal Performance ◽  
Performance Test ◽  
Concrete Block ◽  
Masonry Walls ◽  
Design Code ◽  
Concrete Material ◽  
Mixing Ratios ◽  
Block Wall ◽  
Common Block ◽  
And Performance

To improve the thermal performance of external masonry walls, a new tenon composite block is proposed as the external maintenance component which contains the internal hollow concrete block part, the external block part, and the extruded polystyrene layer fixed by tenons. The production process and concrete material mixing ratio were optimized for the new tenon composite block to promote its application. The mechanical strength and thermal properties of the optimized tenon composite blocks were tested with experiments and numerical simulation in this study. The testing and simulation results indicated that after utilizing the two optimized concrete mixing ratios, the tenon composite block strength matched the strength requirements according to the related design code. The thermal performance of the tenon composite block wall was also good compared with that of a common block wall.

The design of plain masonry walls

1980 ◽  
Vol 7 (2) ◽  
pp. 233-242 ◽  
Author(s):  
Jose Ojinaga ◽  
Carl J. Turkstra
Keyword(s):  
Experimental Data ◽  
Analytical Solution ◽  
Ultimate Strength ◽  
Concrete Block ◽  
Practical Method ◽  
Masonry Walls ◽  
Design Code ◽  
Design Procedures ◽  
Coefficients Of Variation ◽  
Data Design

This paper presents a practical method to determine the ultimate strength of plain brick or concrete block masonry walls. Results given by the proposed method are compared with a more rigorous analytical solution, with published test data, and with the current Canadian design code for masonry. Means and coefficients of variation as well as distribution shapes of the ratio of test to predicted loads are estimated from experimental data. Design procedures and simplifications along with two examples are presented.

Tests Results Strength and Thermophysical Properties of Aerated Concrete Block Wall Samples with the Use of Polyurethane Adhesive

2014 ◽  
Vol 941-944 ◽  
pp. 786-799 ◽  
Author(s):  
G. I. Grinfeld ◽  
Alexsandr S. Gorshkov ◽  
Nikolay I. Vatin
Keyword(s):  
Thermal Conductivity ◽  
Thermophysical Properties ◽  
Concrete Block ◽  
Masonry Walls ◽  
Test Results ◽  
Polyurethane Adhesive ◽  
Concrete Masonry ◽  
Concrete Blocks ◽  
Block Wall ◽  
Aerated Concrete

This article deals with the strength and thermophysical test results made on the basis of the masonry samples of cellular autoclave curing concrete (aerated concrete blocks) with the use of polyurethane adhesive. Aerated concrete masonry walling with the use of polyurethane adhesive is indicated herein to be technologically feasible and economically viable. The major advantage of the masonry option under consideration lies in the following aspect: thermal conductivity of polyurethane adhesive used to fasten aerated concrete blocks in masonry walls is significantly less than thermal conductivity of concrete adhesives and mortars. For this reason, thermal insulation properties of the masonry with polyurethane adhesive appear to be better comparatively to the block masonry made with the usage of concrete adhesives of any other type. On the ground of the tests conducted the following was resumed: it is acceptable to carry out masonry works with the use of aerated concrete blocks and polyurethane adhesive in construction of exterior and interior nonbearing walls provided appropriate justifying calculations are made.

Rancang Bangun Alat Olahan Minyak Kelapa

2016 ◽  
Vol 10 (1) ◽  
pp. 70-77
Author(s):  
Jantri Sirait ◽  
Sulharman Sulharman
Keyword(s):  
Electric Motor ◽  
Performance Test ◽  
Production Capacity ◽  
Coconut Oil ◽  
Heating Time ◽  
Design Tool ◽  
Coconut Milk ◽  
Heating Process ◽  
And Performance ◽  
Time Required

Has done design tool is a tool of refined coconut oil coconut grater, squeezer coconut milk and coconut oil heating, with the aim to streamline the time of making coconut oil and coconut oil increase production capacity. The research method consists of several stages, among others; image creation tool, procurement of materials research, cutting the material - the material framework of tools and performance test tools. The parameters observed during the performance test tools is time grated coconut, coconut milk bleeder capacity, the capacity of the boiler and the heating time of coconut oil. The design tool consists of three parts, namely a tool shaved coconut, coconut milk wringer and coconut milk heating devices. Materials used for the framework of such tools include iron UNP 6 meters long, 7.5 cm wide, 4 mm thick, while the motor uses an electric motor 0.25 HP 1430 rpm and to dampen the rotation electric motor rotation used gearbox with a ratio of round 1 : 60. the results of the design ie the time required for coconut menyerut average of 297 seconds, coconut milk wringer capacity of 5 kg of processes and using gauze pads to filter coconut pulp, as well as the heating process takes ± 2 hours with a capacity of 80 kg , The benefits of coconut oil refined tools are stripping time or split brief coconut average - average 7 seconds and coconut shell can be used as craft materials, processes extortion coconut milk quickly so the production capacity increased and the stirring process coconut oil mechanically.ABSTRAKTelah dilakukan rancang bangun alat olahan minyak kelapa yaitu alat pemarut kelapa, pemeras santan kelapa dan pemanas minyak kelapa, dengan tujuan untuk mengefisiensikan waktu pembuatan minyak kelapa serta meningkatkan kapasitas produksi minyak kelapa. Metode penelitian terdiri dari beberapa tahapan antara lain; pembuatan gambar alat, pengadaan bahan-bahan penelitian, pemotongan bahan - bahan rangka alat dan uji unjuk kerja alat. Parameter yang diamati pada saat uji unjuk kerja alat adalah waktu parut kelapa, kapasitas pemeras santan kelapa, kapasitas tungku pemanas serta waktu pemanasan minyak kelapa. Rancangan alat terdiri dari tiga bagian yaitu alat penyerut kelapa, alat pemeras santan kelapa dan alat pemanas santan kelapa. Bahan yang dipergunakan untuk rangka alat tersebut  yaitu besi UNP panjang 6 meter, lebar 7,5 cm, tebal 4 mm, sedangkan untuk motor penggerak menggunakan motor listrik 0,25 HP 1430 rpm dan untuk meredam putaran putaran motor listrik dipergunakan gearbox  dengan perbandingan putaran 1 : 60. Hasil dari rancangan tersebut yaitu waktu yang dibutuhkan untuk menyerut kelapa rata-rata 297 detik, kapasitas alat pemeras santan kelapa 5 kg sekali proses dan menggunakan kain kassa untuk menyaring ampas kelapa, serta Proses pemanasan membutuhkan waktu ± 2 jam dengan kapasitas 80 kg. Adapun keunggulan alat olahan minyak kelapa ini adalah waktu pengupasan atau belah kelapa singkat rata – rata 7 detik dan tempurung kelapa dapat digunakan sebagai bahan kerajinan, proses pemerasan santan kelapa cepat sehingga kapasitas produksi meningkat dan proses pengadukan minyak kelapa secara mekanis. Kata kunci : penyerut, pemeras, pemanas,minyak kelapa,olahan minyak kelapa.

scholarly journals Design and performance test of variable diameter threshing drum of combine harvester

2021 ◽  
Author(s):  
Zhan Su ◽  
Zhao Ding ◽  
Liquan Tian ◽  
Xue Lin ◽  
Zhiming Wang
Keyword(s):  
Performance Test ◽  
Variable Diameter ◽  
Combine Harvester ◽  
And Performance

Physical and performance characteristics related to starter status, position, and division in Japanese collegiate American-football players

2021 ◽  
pp. 1-8
Author(s):  
Junta Iguchi ◽  
Minoru Matsunami ◽  
Tatsuya Hojo ◽  
Yoshihiko Fujisawa ◽  
Kenji Kuzuhara ◽  
...  
Keyword(s):  
Performance Test ◽  
Vertical Jump ◽  
American Football ◽  
Football Players ◽  
Jump Height ◽  
Test Results ◽  
Repetition Maximum ◽  
Vertical Jump Height ◽  
Division 1 ◽  
And Performance

BACKGROUND: Few studies have investigated the variations in body composition and performance in Japanese collegiate American-football players. OBJECTIVE: To clarify what characterizes competitors at the highest levels – in the top division or on the starting lineup – we compared players’ body compositions and performance test results. METHODS: This study included 172 players. Each player’s body composition and performance (one-repetition maximum bench press, one-repetition maximum back squat, and vertical jump height) were measured; power was estimated from vertical jump height and body weight. Players were compared according to status (starter vs. non-starter), position (skill vs. linemen), and division (1 vs. 2). Regression analysis was performed to determine characteristics for being a starter. RESULTS: Players in higher divisions and who were starters were stronger and had more power, greater body size, and better performance test results. Players in skill positions were relatively stronger than those in linemen positions. Vertical jump height was a significant predictor of being a starter in Division 1. CONCLUSION: Power and vertical jump may be a deciding factor for playing as a starter or in a higher division.

scholarly journals Development of High-Performance Face Gear Set (Machining and Performance Test)

2011 ◽  
Vol 77 (775) ◽  
pp. 573-581
Author(s):  
Isamu TSUJI ◽  
Hiroshi GUNBARA ◽  
Kazumasa KAWASAKI ◽  
Yoshikazu ABE ◽  
Kazutaka SUZUKI ◽  
...  
Keyword(s):  
High Performance ◽  
Performance Test ◽  
Face Gear ◽  
And Performance

Performance of Asphalt Mixture Used for Asphalt Treated Base of Perpetual Pavements

2011 ◽  
Vol 415-417 ◽  
pp. 1531-1536
Author(s):  
Fu Ming Liu ◽  
Duan Yi Wang
Keyword(s):  
Tensile Strain ◽  
Performance Test ◽  
Asphalt Mixture ◽  
Fatigue Tests ◽  
Asphalt Pavements ◽  
Moisture Susceptibility ◽  
Scale Test ◽  
And Performance ◽  
Wheel Tracking ◽  
Fatigue Endurance

This paper presents the results of laboratory and performance tests for an asphalt treated base (ATB) and mixes developed in this study for perpetual asphalt pavements. Laboratory tests for the mixes included moisture susceptibility, wheel tracking and fatigue tests. The results of performance test indicated that the resistances of the high content binder ATB against moisture and fatigue damage were better than those of the lower one. It was also found from the full scale test sections that the tensile strain values at the bottom of the asphalt layer for the ATB sections were low when the asphalt layer thicknesses of the ATB sections were not thicker than those of the conventional sections. All the tensile strain values measured from the ATB sections were within the fatigue endurance limit of 70 microstrain which is the fatigue criterion of a perpetual asphalt pavement.

Sign in / Sign up

Export Citation Format

Share Document