scholarly journals Biological Pretreatment by Solid-State Fermentation of Oat Straw to Enhance Physical Quality of Pellets

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Wei Gao ◽  
Zhiqiang Lei ◽  
Lope G Tabil ◽  
Rongfei Zhao
Keyword(s):  
Particle Size ◽  
Solid State ◽  
Moisture Content ◽  
Solid State Fermentation ◽  
Biological Pretreatment ◽  
Fermentation Time ◽  
Physical Quality ◽  
Fermentation Temperature ◽  
Oat Straw

Pelleting can increase the efficiency of handling and transportation of biomass. Pretreatment obtains lignin fragments by disrupting the lignocellulosic structure of biomass and ensures the high-quality compressed pellets. In this study, solid-state fermentation (SSF) is used as a biological method to improve the quality of pellets of oat straw. SSF of oat straw using Trametes versicolor 52J (TV52J) and Phanerochaete chrysosporium (PC) was conducted. Response surface methodology (RSM) was employed by using a four-factor, three-level Box–Behnken design with fermentation time (days), moisture content (%), particle size (mm), and fermentation temperature (°C) as independent parameters. Pellet density, dimensional stability, and tensile strength were the response variables. The optimization options of fermentation time (33.96 and 35 days), moisture content (70%), particle size (150 and 50 mm), and fermentation temperature (22°C) of oat straw pretreated with these two fungal strains were obtained. The microscopic structural changes of oat straw caused by biological pretreatment were investigated by scanning electron microscopy (SEM). Observation results of SEM showed that the connection between single fibers became relatively loose, and this was beneficial to improve the physical quality of the pellets.

scholarly journals Lovastatin Production byAspergillus terreusUsing Agro-Biomass as Substrate in Solid State Fermentation

2012 ◽  
Vol 2012 ◽  
pp. 1-11 ◽  
Author(s):  
Mohammad Faseleh Jahromi ◽  
Juan Boo Liang ◽  
Yin Wan Ho ◽  
Rosfarizan Mohamad ◽  
Yong Meng Goh ◽  
...  
Keyword(s):  
Particle Size ◽  
Solid State ◽  
Moisture Content ◽  
Nitrogen Source ◽  
Solid State Fermentation ◽  
Incubation Temperature ◽  
Initial Moisture Content ◽  
Fermentation Time ◽  
Maximum Production ◽  
Additional Nitrogen

Ability of two strains ofAspergillus terreus(ATCC 74135 and ATCC 20542) for production of lovastatin in solid state fermentation (SSF) using rice straw (RS) and oil palm frond (OPF) was investigated. Results showed that RS is a better substrate for production of lovastatin in SSF. Maximum production of lovastatin has been obtained usingA. terreusATCC 74135 and RS as substrate without additional nitrogen source (157.07 mg/kg dry matter (DM)). Although additional nitrogen source has no benefit effect on enhancing the lovastatin production using RS substrate, it improved the lovastatin production using OPF with maximum production of 70.17 and 63.76 mg/kg DM forA. terreusATCC 20542 andA. terreusATCC 74135, respectively (soybean meal as nitrogen source). Incubation temperature, moisture content, and particle size had shown significant effect on lovastatin production (P<0.01) and inoculums size and pH had no significant effect on lovastatin production (P>0.05). Results also have shown that pH 6, 25°C incubation temperature, 1.4 to 2 mm particle size, 50% initial moisture content, and 8 days fermentation time are the best conditions for lovastatin production in SSF. Maximum production of lovastatin using optimized condition was 175.85 and 260.85 mg/kg DM forA. terreusATCC 20542 and ATCC 74135, respectively, using RS as substrate.

scholarly journals OPTIMISASI PRODUKSI ENZIM LAKASE PADA FERMENTASI KULTUR PADAT MENGGUNAKAN JAMUR PELAPUK PUTIH Marasmius sp. : PENGARUH UKURAN PARTIKEL, KELEMBAPAN, DAN KONSENTRASI Cu

2016 ◽  
Vol 3 (02) ◽  
Author(s):  
Cornelius Damar Hanung ◽  
Ronald Osmond ◽  
Hendro Risdianto ◽  
Sri Harjati Suhardi ◽  
Tjandra Setiadi
Keyword(s):  
Particle Size ◽  
Solid State ◽  
Moisture Content ◽  
Rice Straw ◽  
Solid State Fermentation ◽  
Carbon Sources ◽  
White Rot Fungi ◽  
Batch Process ◽  
Solid Substrate ◽  
White Rot

White rot fungi of Marasmius sp. is a fungus which produce laccase in high activity. Laccase is one of the ligninolityc enzymes that capable to degrade lignin. This ability can be used for the pretreatment of lignocellulosic materials in the bioethanol production. Laccase was produced in flask by batch process using Solid State Fermentation (SSF). The optimisation was conducted by statistically of full factorial design. The particle size, moisture content, and Cu concentration were investigated in this study. Rice straw was used as solid substrate and the glycerol was used as the carbon sources in modified Kirk medium. The results showed that particle size of rice straw did not affect significantly to the enzyme activity. The highest laccase activity of 4.45 IU/g dry weight was obtained at the moisture content of 61% and Cu concentration of 0.1 mM.Keywords: laccase, Marasmius sp., optimisation, rice straw, solid state fermentation ABSTRAKJamur pelapuk putih, Marasmius sp. merupakan jamur yang menghasilkan enzim lakase dengan aktivitas tinggi. Lakase merupakan enzim ligninolitik yang dapat mendegradasi lignin. Kemampuan ini dapat digunakan untuk proses pengolahan awal bahan lignoselulosa pada pembuatan bioetanol. Produksi lakase dilakukan dalam labu dengan modus batch menggunakan fermentasi kultur padat. Optimisasi produksi enzim lakase dengan metode fermentasi padat dilakukan dengan  rancangan percobaan faktorial penuh. Pengaruh ukuran partikel, kelembapan, dan konsentrasi Cu diuji dengan medium penyangga jerami dengan menambahkan gliserol dalam medium Kirk termodifikasi sebagai sumber karbon. Penelitian ini menunjukkan bahwa ukuran jerami tidak berpengaruh signifikan terhadap aktivitas enzim. Aktivitas enzim lakase maksimum terjadi pada saat kelembapan 61% dan konsentrasi Cu 0,1 mM dengan aktivitas enzim lakase/berat kering tertinggi mencapai 4,45 IU/g.Kata kunci: lakase, Marasmius sp., optimisasi, jerami, fermentasi kultur padat

scholarly journals EFFECT OF FERMENTATION TIME, MOISTURE CONTENT, AND TEMPERATURE ON SORBITOL PRODUCTION VIA SOLID STATE FERMENTATION PROCESS

2017 ◽  
Vol 1 (1) ◽  
pp. 64-71
Author(s):  
Zuriana Sidi Ahmad ◽  
Mimi Sakinah Abdul Munaim
Keyword(s):  
Solid State ◽  
Moisture Content ◽  
Solid State Fermentation ◽  
Incubation Temperature ◽  
Product Yield ◽  
High Yield ◽  
Time Range ◽  
Fermentation Time ◽  
Wood Sawdust ◽  
Ssf Process

Malaysia is the largest country that has produced many types of waste. One of it is Meranti wood sawdust. These wastes result in a significant environmental problem if not dispose it in the proper manner. The main objective of this article is to produce the high yield of sorbitol by solid state fermentation (SSF) process from pretreated Meranti wood sawdust using bacterium Lactobacillus plantarum (BAA 793; NCIMB 8826). One factorat a time (OFAT) was studied for further process using solid state fermentation (SSF) process and investigated the effect of relevant parameters (fermentation time, range: 2 hours to 14 hours, moisture content, range: 40% to 90%, temperature, range: 25 oC to 45 oC) to the solid-state fermentation (SSF) process in producing high yield of sorbitol. The highest product yield was obtained at 50% moisture content, at 10 hours of fermentation time and 35 oC of incubation temperature where the concentration of sorbitol was 25.68 g/L respectively. This study also showed that the solid state fermentation (SSF) process will produce the high yield of sorbitol production compared to the submerged fermentation and could serve as a-low cost substrate for bioproducts production especially sorbitol

scholarly journals Solid-State Fermentation in Brewer’s Spent Grains by Fusarium fujikuroi for Gibberellic Acid Production

2021 ◽  
Vol 11 (5) ◽  
pp. 13042-13052
Keyword(s):  
Solid State ◽  
Moisture Content ◽  
Gibberellic Acid ◽  
Solid State Fermentation ◽  
Production Costs ◽  
Fusarium Fujikuroi ◽  
New Production ◽  
Fermentation Time ◽  
Spent Grains ◽  
Biotechnological Processes

The search for new production methodologies of gibberellic acid (GA3), such as solid-state fermentation (SSF), and the use of agro-industrial waste are important to lower production costs. Therefore, the aim of this study was GA3 production by Fusarium fujikuroi on SSF mode using brewer’s spent grains (BSG). BSG presents in its composition components that are known to be excellent inducers of metabolite production, showing, this way, its potential to be used as the substrate in biotechnological processes. Optimization of GA3 production was carried out using a 22 central composite design, considering the effects of moisture content, temperature, and fermentation time. The highest mycelial growth and GA3 production (0.82 g.Kg-1) was obtained in the condition of 80% moisture content, 28 °C in 96 hours of fermentation. These results suggest that the SSF using BSG as the medium for the growth of F. fujikuroi is a viable way to GA3 produce.

scholarly journals Effects of nutriental and environmental conditions on carotenoid biosynthesis by Rhodotorula sp.

2020 ◽  
Vol 8 (2) ◽  
pp. 22-29
Author(s):  
Ly Thi Minh Hien ◽  
Dong Thi Anh Dao
Keyword(s):  
Solid State ◽  
Environmental Factors ◽  
Moisture Content ◽  
Solid State Fermentation ◽  
Environmental Conditions ◽  
Low Cost ◽  
Carotenoid Biosynthesis ◽  
Natural Antioxidants ◽  
Fermentation Time ◽  
Agricultural Byproduct

Carotenoid compounds are popular natural antioxidants which are commonly isolated from the plants. Recently, there have been many researches on carotenoid biosynthesis towards low cost products. In this study, Rhodotorula sp. was grown on an agricultural byproduct (corncobs) as a matrix in solid-state fermentation. Essential nutrients were added with different concentrations to optimize condition for the carotenoid biosynthesis. Effects of other environmental factors such as moisture content and fermentation time on the yield were also characterized. The optimal nutrient composition for the yeast’s growth and carotenoid biosynthesis is a compound of 500μg nitrogen and 16mg carbon in 100g matrix. Additionally, the moisture content of 80% is the best for producing carotenoid by this yeast strain. The fermentation time for the highest carotenoid yield is observed after 8 days.

scholarly journals Optimisation of solid-state fermentation of Aspergillus niger JL-15 for xylanase production and xylooligosaccharides preparation

2011 ◽  
Vol 29 (No. 5) ◽  
pp. 557-567 ◽  
Author(s):  
X.-J. Dai ◽  
M.-Q. Liu ◽  
H.-X. Jin ◽  
M.-Y. Jing
Keyword(s):  
Solid State ◽  
Aspergillus Niger ◽  
Moisture Content ◽  
Solid State Fermentation ◽  
Xylanase Activity ◽  
Orange Peel ◽  
Basic Medium ◽  
Relative Molecular Mass ◽  
Xylanase Production ◽  
Fermentation Time

The production of xylanase (XylA) by Aspergillus niger JL-15 in solid-state fermentation (SSF) on orange peel was optimised by the response surface methodology (RSM). The results revealed that four factors had significant effects on the XylA production (P &lt; 0.05), that is the concentrations of the added glycerin and ammonium sulfate, the moisture content, and fermentation time. Exploying orange peel as the solid substrate, maximum xylanase activity (917.7&nbsp;U/g dry fermentation product) was obtained at 4.2% glycerin, 3.1% (NH<sub>4</sub>)<sub>2</sub>SO<sub>4</sub>, 61% moisture content, and 73.4-h fermentation, this activity being close to the predicted one and 3.2 times higher than that of the basic medium (218.5&nbsp;U/g). Optimum temperature and pH for XylA activity were 55&deg;C and pH 5.0, respectively. SDS-PAGE analysis showed that the relative molecular mass of XylA was about 30.0 kDa. XylA exhibited K<sub>m</sub> and V<sub>max </sub>values of 9.24 mg/ml and 54.05&nbsp;&mu;mol/min/ml, respectively. XylA liberated mainly xylotriose from birchwood xylan and wheat bran, respectively. XylA was an endo-acting xylanase with transglycosylation activity, with the ability to hydrolyse, xylobiose, xylotriose, xylotetraose, xylopentaose, and xylohexaose.

Substrate particle size reduction by Bacillus coagulans in solid-state fermentation

1996 ◽  
Vol 18 (2) ◽  
pp. 121-125 ◽  
Author(s):  
M.P. Nandakumar ◽  
M.S. Thakur ◽  
K.S.M.S. Raghavarao ◽  
N.P. Ghildyal
Keyword(s):  
Particle Size ◽  
Solid State ◽  
Solid State Fermentation ◽  
Bacillus Coagulans ◽  
Size Reduction ◽  
Particle Size Reduction ◽  
Substrate Particle

Physical Quality of Turmeric Powder (Curcuma longga Linn) Result of Foam-mat Drying Method Using Microwave

2021 ◽  
pp. 57-65
Author(s):  
Dhinar Patliani ◽  
Dian Purbasari
Keyword(s):  
Grain Size ◽  
Moisture Content ◽  
Water Absorption ◽  
Bulk Density ◽  
Oil Absorption ◽  
Drying Method ◽  
Physical Quality ◽  
Average Grain Size ◽  
Two Factors

Turmeric (Curcuma longa L) in Indonesia is widely known as a herbal medicinal plant, food coloring, and food flavoring. The high water content of turmeric will shorten the storage time and the quality of the ingredients. The need for drying which is the process of removing the moisture content of the material with the aim of prolonging the shelf life. The use of the foam-mat drying method with the addition of adhesives aims to speed up the drying process and maintain the quality of a material. The result of drying turmeric obtained is turmeric powder product. This study used a completely randomized design (CRD) with two factors, namely the variation of the microwave oven power and the composition of the developer agent (ovalet). The research procedure was divided into two stages, namely the manufacture of powder and continued with the measurement of physical quality. The stages of making powder begin with the preparation of raw materials, stripping, size reduction, addition of developer, drying, then grinding. The second stage is measuring physical quality, namely fineness modulus, average grain size, powder moisture content, color, water absorption, oil absorption, and bulk density. The power variations used are 420 watts, 535 watts, and 680 watts, while the composition of the developer is 1%, 2%, and 4%. Data analysis using two-way ANOVA statistical test with two factors that affect the variation of power and composition of the developer (ovalet). FM values ​​ranged from 0.364 – 1.576, D values ​​ranged from 0.005 – 0.0012 mm, final moisture content values ​​ranged from 7.60 – 9.59%, powder moisture content values ​​ranged from 9.47 – 11.43%ww , L values ​​ranged from 61.46 – 65.96, a values ​​ranged from 13.54 – 16.05, b values ​​ranged from 48.21 – 52.42, DSA values ​​ranged from 2.78 – 3.54 ml/ g, DSM values ​​ranged from 1.22 – 1.60 ml/g, and DC values ​​ranged from 0.38 – 0.44 g/cm3. The combination treatment of drying power with developer is influenced by the drying power of the parameters, namely the value of moisture content, fineness modulus, average grain size, brightness level, redness level, yellowness level, oil absorption, water absorption, and bulk density. While the developer affects the finenes modulus, average grain size, yellowness level, and bulk density.

scholarly journals PRODUCTION AND CHARACTERIZATION OF CELLULOLYTIC ENZYMES BY ASPERGILLUS NIGER AND RHIZOPUS SP. BY SOLID STATE FERMENTATION OF PRICKLY PEAR

2016 ◽  
Vol 29 (1) ◽  
pp. 222-233 ◽  
Author(s):  
TAMIRES CARVALHO DOS SANTOS ◽  
GEORGE ABREU FILHO ◽  
AILA RIANY DE BRITO ◽  
AURELIANO JOSÉ VIEIRA PIRES ◽  
RENATA CRISTINA FERREIRA BONOMO ◽  
...  
Keyword(s):  
Solid State ◽  
Aspergillus Niger ◽  
Water Activity ◽  
Solid State Fermentation ◽  
Cellulase Production ◽  
Cellulolytic Enzymes ◽  
Optimum Conditions ◽  
Thermostable Enzymes ◽  
Fermentation Time ◽  
Rhizopus Sp

ABSTRACT: Prickly palm cactus husk was used as a solid-state fermentation support substrate for the production of cellulolytic enzymes using Aspergillus niger and Rhizopus sp. A Box-Behnken design was used to evaluate the effects of water activity, fermentation time and temperature on endoglucanase and total cellulase production. Response Surface Methodology showed that optimum conditions for endoglucanase production were achieved at after 70.35 h of fermentation at 29.56°C and a water activity of 0.875 for Aspergillus niger and after 68.12 h at 30.41°C for Rhizopus sp. Optimum conditions for total cellulase production were achieved after 74.27 h of fermentation at 31.22°C for Aspergillus niger and after 72.48 h and 27.86°C for Rhizopus sp. Water activity had a significant effect on Aspergillus niger endoglucanase production only. In industrial applications, enzymatic characterization is important for optimizing variables such as temperature and pH. In this study we showed that endoglucanase and total cellulase had a high level of thermostability and pH stability in all the enzymatic extracts. Enzymatic deactivation kinetic experiments indicated that the enzymes remained active after the freezing of the crude extract. Based on the results, bioconversion of cactus is an excellent alternative for the production of thermostable enzymes.

Sign in / Sign up

Export Citation Format

Share Document