Physical Quality of Turmeric Powder (Curcuma longga Linn) Result of Foam-mat Drying Method Using Microwave

2021 ◽  
pp. 57-65
Author(s):  
Dhinar Patliani ◽  
Dian Purbasari
Keyword(s):  
Grain Size ◽  
Moisture Content ◽  
Water Absorption ◽  
Bulk Density ◽  
Oil Absorption ◽  
Drying Method ◽  
Physical Quality ◽  
Average Grain Size ◽  
Two Factors

Turmeric (Curcuma longa L) in Indonesia is widely known as a herbal medicinal plant, food coloring, and food flavoring. The high water content of turmeric will shorten the storage time and the quality of the ingredients. The need for drying which is the process of removing the moisture content of the material with the aim of prolonging the shelf life. The use of the foam-mat drying method with the addition of adhesives aims to speed up the drying process and maintain the quality of a material. The result of drying turmeric obtained is turmeric powder product. This study used a completely randomized design (CRD) with two factors, namely the variation of the microwave oven power and the composition of the developer agent (ovalet). The research procedure was divided into two stages, namely the manufacture of powder and continued with the measurement of physical quality. The stages of making powder begin with the preparation of raw materials, stripping, size reduction, addition of developer, drying, then grinding. The second stage is measuring physical quality, namely fineness modulus, average grain size, powder moisture content, color, water absorption, oil absorption, and bulk density. The power variations used are 420 watts, 535 watts, and 680 watts, while the composition of the developer is 1%, 2%, and 4%. Data analysis using two-way ANOVA statistical test with two factors that affect the variation of power and composition of the developer (ovalet). FM values ​​ranged from 0.364 – 1.576, D values ​​ranged from 0.005 – 0.0012 mm, final moisture content values ​​ranged from 7.60 – 9.59%, powder moisture content values ​​ranged from 9.47 – 11.43%ww , L values ​​ranged from 61.46 – 65.96, a values ​​ranged from 13.54 – 16.05, b values ​​ranged from 48.21 – 52.42, DSA values ​​ranged from 2.78 – 3.54 ml/ g, DSM values ​​ranged from 1.22 – 1.60 ml/g, and DC values ​​ranged from 0.38 – 0.44 g/cm3. The combination treatment of drying power with developer is influenced by the drying power of the parameters, namely the value of moisture content, fineness modulus, average grain size, brightness level, redness level, yellowness level, oil absorption, water absorption, and bulk density. While the developer affects the finenes modulus, average grain size, yellowness level, and bulk density.

scholarly journals Mutu Fisik Dan Teknik Pematahan Dormansi Benih Kayu Kuku (Pericopsis mooniana (Thw.) Thw.)

2020 ◽  
Vol 11 (3) ◽  
pp. 199-205
Author(s):  
Arum Sekar Wulandari ◽  
Afrida Rizka Farzana
Keyword(s):  
Moisture Content ◽  
Cold Water ◽  
Dormancy Breaking ◽  
Seed Moisture Content ◽  
Physical Quality ◽  
Seed Moisture ◽  
Breaking Seed Dormancy ◽  
Short Time ◽  
Number Of Seeds

The presence of Pericopsis mooniana (Thw.) Thw. in nature is endangered. Meanwhile, Pericopsis mooniana plants have its obstacles in generative propagation because the seeds have mechanical dormancy. Studies carried out to: (1) observe the morphology of pods, seeds and sprouts of Pericopsis mooniana; (2) determine the physical quality of Pericopsis mooniana seeds, and (3) analyze the proper dormancy breaking treatment for Pericopsis mooniana seeds. Research is conducted in laboratories and in greenhouses. The physical quality of the seeds measured was the weight of 1,000 seeds and the moisture content. The treatment for breaking the dormancy of the Pericopsis mooniana seeds were control, scarification of the seeds using nail clippers and soaking in hot to cold water for 48 hours. Morphologically, the fruit of Pericopsis mooniana is pod-shaped, with orange seeds, oval-shaped and curved edges. Pericopsis mooniana sprouts include in the epigeal type. In 1 kg of weight there are ± 4,000 Pericopsis mooniana seeds, with the post harvest seed moisture content amounting to 7.62%. The dormancy breaking treatment of Pericopsis mooniana seeds increased seeds germination by 60% compared to controls. The scarification of Pericopsis mooniana seeds using nail clippers for breaking mechanical dormancy is the best treatment because it can increase the number of seeds germinating in a short time and simultaneously. Key words: breaking seed dormancy, morphology, Pericopsis mooniana, physical quality, seed scarificatio

scholarly journals Comparative nutritional and functional properties of selected underutilized legumes

2020 ◽  
Vol 45 (3) ◽  
Author(s):  
K. O. Soetan ◽  
A. A. Adeola
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Functional Properties ◽  
Absorption Capacity ◽  
Phaseolus Lunatus ◽  
International Institute ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Crude Fibre ◽  
Emulsion Capacity

Underutilized and neglected legumes have numerous nutritional potentials with great contributions to food security but they are usually excluded from research and development agenda. This study evaluates the nutritional and functional properties of six different underutilized and neglected legumes; Lima bean (LB) (Phaseolus lunatus) (2006-009), Bambara groundnut (BG) (Vigna subterranea) (TVSU- 1482), winged bean (WB) (Psophocarpus tetragonolobus) (Tpt-48), jack bean (JB) (Canavalia ensiformis) (Tce-4), sword bean (SB) (Canavalia gladiata) (Tcg-4) and African yam bean (AYB) (Sphenostylis stenocarpa) (TSS-95) from the Genetic Resources Unit (GRU), International Institute of Tropical Agriculture (IITA), Ibadan, Oyo State, Nigeria. Nutritional and functional properties were evaluated using proximate composition, mineral analyses and functional properties like bulk density, water absorption capacity, oil absorption capacity, emulsion capacity and dispersibility. All the procedures were carried out using standard protocols. Statistical analysis was done using descriptive statistics. Results of proximate analysis showed that crude protein ranged from18.88 0.15%(WB) to 26.60±0.14%(AYB), crude fat ranged from 1.84 0.02% (JB) to 6.39 0.03% (BG), crude fibre ranged from 3.70 ±0.00% (AYB) to 5.04 0.03% (SB), ash ranged from 3.10 ± 0.14% (AYB) to 4.66 0.02% (LB), nitrogen free extract ranged from 55.60 0.04% (SB) to 62.97 0.12% (WB), moisture content ranged from 5.75 0.48% (AYB) to 10.77 0.03% (JB), dry matter ranged from 89.23 0.03% (JB) to 94.25 ± 0.488% (AYB) and gross energy ranged from 4.39 0.003 kcal/g (SB) to 4.66 0.00 (BG). Mineral content results revealed that calcium varied from 0.14 0.000% (LB) to 0.23 0.0003% (AYB), phosphorus varied from 0.20 0.0001% (AYB) to 0.38 0.00% (BG), sodium varied from 0.12 0.00% (LB and WB) to 0.35 0.0006% (AYB), potassium varied from 0.69 0.00% (LB) to 1.12 0.00% (BG), magnesium varied from 0.15 0.0002% (AYB) to 0.27 0.000% (BG) and iron varied from 44.84 0.03 (mg/g) (WB) to 80.98 0.0007(mg/g) (AYB). Results of functional properties showed that bulk density ranged from 0.45±0.04 g/mL (WB) to 0.77±0.08 g/mL (SB), water absorption capacity ranged from 168.33±0.03 g/100g (LB) to 183.62±0.01 g/100g (SB), oil absorption capacity ranged from 146.54 ±0.02 g/100g (LB) to 161.55±0.02 g/100g (JB), emulsion capacity ranged from 79.67 ±0.02 g/100g (LB) to 89.46±0.02 g/100g (SB) and dispersibility ranged from81.0±1.41%(SB) to 86.5±0.71% (BG). The study concluded that all the underutilized legumes have varying nutritional and functional properties, which should be exploited for nutritional benefits and industrial applications, as a solution to the problem of food shortage, especially in the developing countries.

scholarly journals The effect of dryer air temperature on fineness modulus and moisture content of cassava flour in pneumatic dryer process

2018 ◽  
Vol 73 ◽  
pp. 05015
Author(s):  
Witdarko Yus ◽  
Mekiuw Yosehi ◽  
Sri Suryaningsih Ni Luh ◽  
Wahida
Keyword(s):  
Moisture Content ◽  
Air Temperature ◽  
Process Condition ◽  
Coefficient Of Determination ◽  
Drying Method ◽  
Flour Milling ◽  
Pneumatic Drying ◽  
Water Rate ◽  
Fineness Modulus

One of drying method applied in flour milling industry is pneumatic drying. Various kinds of variable both dried materials and drying process condition strongly influence the quality of drying result. Fineness Modulus (FM) and Water Rate are significant variables in defining the flour quality. The aim of this study is to identify the influence of dryer air temperature on FM and Moisture Content in pneumatic dryer process condition. Both variables have sufficiently big coefficient of determination value; therefore, it can be employed to predict well the fineness modulus and water rate of the flour.

scholarly journals The Physical of Biscuit Complete Ration Based on Hymenacne Acutigluma Supplemented with Different Legumes

2018 ◽  
Vol 68 ◽  
pp. 01021
Author(s):  
Riswandi ◽  
Basuni Hamzah ◽  
Agus Wijaya ◽  
Arfan Abrar ◽  
S Agus ◽  
...  
Keyword(s):  
Specific Gravity ◽  
Water Absorption ◽  
Water Content ◽  
Animal Feed ◽  
Physical Quality ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Range Test

The aim of this research was to study the effects of supplementation different legumes on the physical quality of biscuit complete ration based on hymenacne acutigluma. This study was conducted in Animal Feed and Nutrition Laboratory of Agriculture Faculty, Sriwijaya University. This study was done in 2 months. A completely randomized design with four treatments and four replicates was used in this study. Each treatments were P0= 70% kumpai grass + 30% concentrate + 0% legume, P1= 55% kumpai grass + 7.5% lamtoro leaves + 7.5% water mimmosa + 30% concentrate, P2= 55% kumpai grass + 7.5% acacia leaves + 30% concentrate, and P3= 55% kumpai grass + 5% lamtoro leaves + 5% acacia leaves + 5 % water mimmosa + 30% concentrate. Variables measured were water content, density, average collision endurance, specific gravity and water absorption. The result indicated that The adding of different legumes in the ration significantly (P<0.05) affected the specific gravity and water absorption, but no significant effect on density, average collision endurance. Duncan Multirange Range Test showed that treatment of control (P0) had the highest of water absorption (264.56%). The highest content of water gravity was obtained in the treatment of adding lamtoro, acacia and water mimmosa (P3), namely 0.9 g/ml water gravity. The conclusion of this study is the addition of different legumes in kumpai grass-based diets can improve the physical quality of the complete ration biscuit. The addition of lamtoro leaves, water mimosa and acacia at the level of 5%, gave the best result in specific gravity and water absorption.

Experimental Study on the Property of Regenerating Concrete in Different Graduation

2012 ◽  
Vol 174-177 ◽  
pp. 921-924
Author(s):  
Xun Zhong Zhang ◽  
Ping Liu ◽  
Bin Jia
Keyword(s):  
Experimental Study ◽  
Moisture Content ◽  
Water Absorption ◽  
Packing Density ◽  
Pressure Loss ◽  
Reference Value ◽  
New Method ◽  
Strength Grade ◽  
Variation Characteristics

Through experiments based on three different graduations of regenerating concrete,the paper analyzes the parameters variation characteristics, such as performance of the density, water absorption, moisture content, packing density and crushed indicators.The research shows that Pressure loss of the quality of the regenerating concrete is proportional with loading force. What’s more, it can also reflect the own strength grade of aggregate in a more direct way and should be a new method to assess aggregate strength. Simultaneously, it gives us a relatively superior graduation and provides reference value for guiding actual project.

Development and Characterization of Extruded Product Using Carrot Pomace and Rice Flour

2010 ◽  
Vol 6 (3) ◽  
Author(s):  
Navneet Kumar ◽  
B. C. Sarkar ◽  
Harish Kumar Sharma
Keyword(s):  
Moisture Content ◽  
Water Absorption ◽  
Bulk Density ◽  
Water Solubility ◽  
Rice Flour ◽  
Absorption Index ◽  
Lateral Expansion ◽  
Screw Speed ◽  
Sensory Score ◽  
Die Temperature

Dehydrated carrot pomace was added in different proportions (10-30%) to rice flour. The formulation was extruded at different moisture content (17-21%), screw speed (270-310 rpm) and die temperature (110-130°C). The experimental combinations were decided based on central composite rotatable design for four variables at five levels of each variable. The lateral expansion, bulk density, water absorption index, water solubility index, hardness and sensory characteristics were measured as responses. Significant regression models were established with the coefficient of determination, R² greater than 0.70. The results indicated that pomace proportion, screw speed and temperature significantly influenced (P<0.10) lateral expansion; moisture content and screw speed for bulk density; pomace proportion and temperature for water absorption index and water solubility index, pomace proportion, screw speed and temperature for hardness and screw speed for sensory score. The compromised optimum condition obtained by numerical integration for development of extrudates were: carrot pomace of 11.75% in rice flour, moisture content 19.92%, screw speed 249.1 rpm and die temperature 114.3°C. Sensory evaluation revealed that carrot pomace could be incorporated into ready-to-eat expanded products upto the level of 11.75%.

Study of the Effect of Hot Gas on Atomization Quality of Spray Forming

2013 ◽  
Vol 774-776 ◽  
pp. 1190-1193
Author(s):  
Qing Yang ◽  
Ying Dong Qu ◽  
Rui Ming Su ◽  
Bing Kun Zheng ◽  
Yu Sheng Wu
Keyword(s):  
Mathematical Model ◽  
Grain Size ◽  
Grain Shape ◽  
Spray Forming ◽  
Forming Process ◽  
Hot Gas ◽  
Average Grain Size ◽  
Calculation Results ◽  
First Time

In the spray forming process, the atomizing quality is not very good under the low pressure. This article attempts to improve the quality of atomization through heating the gas. A mathematical model is built and calculated according to the existing knowledge, and then the influence of airflow temperature in the spray forming is theoretical calculated and analyzed. The experimental results show that the average grain size is 54μm when the gas is not heated; the average grain size is 39 μm which decreases by 27.7% than airflow unheated when the gas is heated to 150 °C. The calculation results show that when the gas is not heated, the first time atomization grain size is 201 μm, the second time atomization grain size is 15 μm, the total atomization time is 92 μs. And the velocity of atomization droplets is 80 m/s; when the airflow temperature is 150°C, the above results are 131 μm, 10 μm, 76 μs and 127 m/s respectively, the atomization quality has a certain improvement compared to the unheated condition. At the same time, the grain shape becomes more round as the temperature of airflow increases, and the holes between the grains also become smaller.

scholarly journals GUAR GUM ADDITION ON PHYSICAL CHARACTERISTICS OF EXTRUDED DRY CORN NOODLE FROM MIXTURE OF WET AND DRY CORN FLOURS

2020 ◽  
Vol 11 (1) ◽  
pp. 39
Author(s):  
Aminullah Aminullah ◽  
Tjahja Muhandri ◽  
Subarna Subarna
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Shelf Life ◽  
Guar Gum ◽  
Physical Characteristics ◽  
Cooking Loss ◽  
Drying Process ◽  
Corn Flour ◽  
Physical Quality

The drying process of corn noodles was an effort to increase the shelf life and it was a form of noodles diversification. The objective of this research was to study and analyze the effect of guar gum addition on the physical quality of the extruded dry corn noodle made from a mixture of wet and dry corn flour. Manufacturing dry corn noodles was conducted using wet corn noodles from a mixture of wet and dry corn flour, which was then dried in a tray dryer at a temperature of 60-70 °C for 1 - 1.5 hours. The treatments used were a combination of alum levels of 0.01%; moisture content of 80% (dry base); and guar gum concentration of 0%, 1%, and 2%. Physical properties of dry corn noodles included rehydration time, hardness, adhesiveness, suppleness, elongation, and cooking loss. The results showed that the optimum rehydration time for dry corn noodles was about 9 minutes. The addition of guar gum to the physical qualities of dry corn noodles tended not to be significant statistically, but as a score, an increase in guar gum levels tended to increase the elongation of dry corn noodles. While, increasing levels of guar gum tended to reduce the stickiness and cooking loss levels of them.

scholarly journals Karakteristik Sifat Mekanik Wadah Makanan dari Limbah Daun Pisang Kering

2021 ◽  
Vol 6 (1) ◽  
pp. 27-34
Author(s):  
Zilmi Azyurah Rahman ◽  
Hernawati Hernawati ◽  
Ayusari Wahyuni
Keyword(s):  
Water Absorption ◽  
Absorption Test ◽  
Steel Mold ◽  
Physical Quality ◽  
Large Plate ◽  
Average Value ◽  
Water Absorption Test ◽  
Quality Of Food ◽  
Food Media

The objective of this research is to determine the physical quality of food media, consisting of small plate, large plate and small bowl. The method used of this research is testing the water absorption and resistance of the food media’s temperature. The process of making a food media using a stainless steel mold which is heated using a food thermometer with 100   and a load of 10 kg as a pressure, then it is printed for 5 minutes with 4 times taking the data for each food media. There are two testing of food media, the first test is water absorption with 29.5  for 125 miles into a small plate, 200 miles into a small bowl and 250 miles into a large plate for 60 minutes, the average value of the water absorption test for the Non-woven food media consists of three forms food medias have 0.00  as the same result, meanwhile woven media such as small plate has 65.00 , large plate has 44.83 and small bowl has 66.68 .  Second test is resistance of the food medias based on temperature parameters. The temperatures used were 40, 60, 80 for non-woven food media consists of three forms food media which had few change after drying, while for woven food media consists three forms of food media had the same results, that is seepage (leaking) in the food media.

Sign in / Sign up

Export Citation Format

Share Document