scholarly journals Green Synthesis of ZnO-GO Composites for the Photocatalytic Degradation of Methylene Blue

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Yi Lin ◽  
Ruoyu Hong ◽  
Huaiyin Chen ◽  
Di Zhang ◽  
Jinjia Xu
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Reaction Rate Constant ◽  
Precipitation Method ◽  
X Ray ◽  
Catalyst Carrier ◽  
Interface Coupling ◽  
Photodegradation Efficiency ◽  
Vis Spectroscopy ◽  
Potential Applications

Beneficial from the excellent optical performance of zinc oxide (ZnO) nanocrystals and the absorption properties of graphene oxide (GO), the nanocomposites of ZnO and GO with synergistic photocatalytic effects were prepared by a precipitation method, in which GO is utilized as the catalyst carrier. The prepared composites were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, UV-vis spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy and also performed photocatalytic activity for the nanocomposites. The results show that ZnO is uniformly loaded on the surface of GO assisted by an effective interface coupling. Due to interface coupling between ZnO and GO, electrons can be directly transferred from the valence band of ZnO to GO. The photodegradation efficiency of the composites reaches to 97.6%, and the first-order reaction rate constant of photodegradation is calculated to be 0.04401 min-1. The novel ZnO-GO composites with excellent photocatalytic performance display promising potential applications in the field of photocatalysis and will provide a new platform for building next-generation graphene-based semiconductor composites.

HIGHLY CATALYTIC Ag/Co3O4 NANOCATALYSTS FABRICATED FOR RhB DYE DEGRADATION THROUGH A SIMPLE SILVER-MIRROR REACTION UNDER VISIBLE LIGHT

NANO ◽  
2014 ◽  
Vol 09 (08) ◽  
pp. 1450090 ◽  
Author(s):  
XIAOLEI SI ◽  
GUANGLIANG CHEN ◽  
ZHILI CHEN ◽  
JUN HUANG ◽  
SHIHUA CHEN ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Ag Nanoparticles ◽  
Dye Degradation ◽  
Precipitation Method ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Silver Mirror ◽  
Silver Mirror Reaction

In this paper, a highly catalytic and nanosized Ag / Co 3 O 4 composite for rhodamine B ( RhB ) degradation was fabricated by using the co-precipitation method at room temperature. The Ag / Co 3 O 4 structure and catalytic properties were characterized through scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) gas-sorption measurements, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-Vis spectroscopy. The results showed that the Co 3 O 4 nanosheets prepared by hydrothermal synthesis mainly exposed (2 2 0) and (1 1 1) facets, which played an important role in determining its catalytic oxidation performance. The Co 3 O 4 nanosheets doped with Ag nanoparticles by a simple silver-mirror reaction exhibited a stable and well-dispersed property in dye solution. Compared to the Ag and Co 3 O 4 nanostructure, the Ag nanoparticles with bigger diameter (10 nm) on Co 3 O 4 surface also readily produced surface-active oxygen species and exhibited a higher catalytic activity for the degradation of RhB solution (5 mg ⋅ L-1) under the visible light. The kinetic constant K of Ag / Co 3 O 4 catalyst for RhB degradation reaction was evaluated to 0.02724 min-1, which is relatively higher than those reported in the literatures.

scholarly journals Synthesis of Three-Dimensional Fe3O4/Graphene Aerogels for the Removal of Arsenic Ions from Water

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Yan Ye ◽  
Da Yin ◽  
Bin Wang ◽  
Qingwen Zhang
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
3D Structure ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Aerogels ◽  
Transmission Electron ◽  
Potential Applications ◽  
Removal Of Arsenic

We report the synthesis of three-dimensional Fe3O4/graphene aerogels (GAs) and their application for the removal of arsenic (As) ions from water. The morphology and properties of Fe3O4/GAs have been characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and superconducting quantum inference device. The 3D nanostructure shows that iron oxide nanoparticles are decorated on graphene with an interconnected network structure. It is found that Fe3O4/GAs own a capacity of As(V) ions adsorption up to 40.048 mg/g due to their remarkable 3D structure and existence of magnetic Fe3O4nanoparticles for separation. The adsorption isotherm matches well with the Langmuir model and kinetic analysis suggests that the adsorption process is pseudo-second-ordered. In addition to the excellent adsorption capability, Fe3O4/GAs can be easily and effectively separated from water, indicating potential applications in water treatment.

scholarly journals Microwave-assisted preparation of ZnS and ZnSe nanocrystals with different morphologies for photodegradation process of organic dyes

2019 ◽  
Author(s):  
Katarzyna Matras-Postolek ◽  
A. Zaba ◽  
S. Sovinska ◽  
D. Bogdal
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Organic Dyes ◽  
Zinc Sulphide ◽  
Conventional Heating ◽  
Bet Surface Area ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy

Zinc sulphide (ZnS) and zinc selenide (ZnSe) and manganese-doped and un-doped with different morphologies from 1D do 3D microflowers were successfully fabricated in only a few minutes by solvothermal reactions under microwave irradiation. In order to compare the effect of microwave heating on the properties of obtained  nanocrystals, additionally the synthesis under conventional heating was conducted additionally in similar conditions. The obtained nanocrystals were systematically characterized in terms of structural and optical properties using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance UV-Vis spectroscopy (DR UV-Vis), Fourier-transform infrared spectroscopy (FT-IR), photoluminescence spectroscopy (PL), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) surface area analysis. The photocatalytic activity of ZnSe, ZnS, ZnS:Mn and ZnSe:Mn nanocrystals with different morphologies was evaluated by the degradation of methyl orange (MO) and Rhodamine 6G (R6G), respectively. The results show that Mn doped NCs samples had higher coefficient of degradation of organic dyes under ultraviolet irradiation (UV).

scholarly journals Spinel-Type (FeCoCrMnZn)3O4 High-Entropy Oxide: Facile Preparation and Supercapacitor Performance

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5798
Author(s):  
Bingliang Liang ◽  
Yunlong Ai ◽  
Yiliang Wang ◽  
Changhong Liu ◽  
Sheng Ouyang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Nickel Foam ◽  
Spinel Type ◽  
X Ray ◽  
High Entropy ◽  
Transmission Electron ◽  
Coating Method ◽  
Potential Applications ◽  
Supercapacitor Performance

High-entropy oxides (HEOs) have attracted more and more attention because of their unique structures and potential applications. In this work, (FeCoCrMnZn)3O4 HEO powders were synthesized via a facile solid-state reaction route. The confirmation of phase composition, the observation of microstructure, and the analysis of crystal structure, distribution of elements, and valences of elements were conducted by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS), respectively. Furthermore, a (FeCoCrMnZn)3O4/nickel foam ((FeCoCrMnZn)3O4/NF) electrode was prepared via a coating method, followed by the investigation of its supercapacitor performance. The results show that, after calcining (FeCoCrMnZn)3O4 powders at 900 °C for 2 h, a single spinel structure (FCC, Fd-3m, a = 0.8399 nm) was obtained with uniform distribution of Fe, Co, Cr, Mn, and Zn elements, the typical characteristic of a high-entropy oxide. In addition, the mass specific capacitance of the (FeCoCrMnZn)3O4/NF composite electrode was 340.3 F·g−1 (with 1 M KOH as the electrolyte and 1 A·g−1 current density), which indicates that the (FeCoCrMnZn)3O4 HEO can be regarded as a prospective candidate for an electrode material in the field of supercapacitor applications.

scholarly journals Bio-assisted preparation of efficiently architectured nanostructures of γ-Fe2O3 as a molecular recognition platform for simultaneous detection of biomarkers

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Sasikala Sundar ◽  
V. Ganesh
Keyword(s):  
Electron Microscopy ◽  
Iron Oxide ◽  
Photoelectron Spectroscopy ◽  
Simultaneous Detection ◽  
Differential Pulse ◽  
Precipitation Method ◽  
Limit Values ◽  
X Ray ◽  
Co Precipitation ◽  
The Individual

Abstract Magnetic nanoparticles of iron oxide (γ-Fe2O3) have been prepared using bio-assisted method and their application in the field of biosensors is demonstrated. Particularly in this work, different nanostructures of γ-Fe2O3 namely nanospheres (NS), nanograsses (NG) and nanowires (NW) are prepared using a bio-surfactant namely Furostanol Saponin (FS) present in Fenugreek seeds extract through co-precipitation method by following “green” route. Three distinct morphologies of iron oxide nanostructures possessing the same crystal structure, magnetic properties, and varied size distribution are prepared and characterized. The resultant materials are analyzed using field emission scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, vibrating sample magnetometer and Fourier transform infrared spectroscopy. Moreover, the effect of reaction time and concentration of FS on the resultant morphologies of γ-Fe2O3 nanostructures are systematically investigated. Among different shapes, NWs and NSs of γ-Fe2O3 are found to exhibit better sensing behaviour for both the individual and simultaneous electrochemical detection of most popular biomarkers namely dopamine (DA) and uric acid (UA). Electrochemical studies reveal that γ-Fe2O3 NWs showed better sensing characteristics than γ-Fe2O3 NSs and NGs in terms of distinguishable voltammetric signals for DA and UA with enhanced oxidation current values. Differential pulse voltammetric studies exhibit linear dependence on DA and UA concentrations in the range of 0.15–75 µM and 5 μM – 0.15 mM respectively. The detection limit values for DA and UA are determined to be 150 nM and 5 µM. In addition γ-Fe2O3 NWs modified electrode showed higher sensitivity, reduced overpotential along with good selectivity towards the determination of DA and UA even in the presence of other common interferents. Thus the proposed biosensor electrode is very easy to fabricate, eco-friendly, cheaper and possesses higher surface area suggesting the unique structural patterns of γ-Fe2O3 nanostructures to be a promising candidate for electrochemical bio-sensing and biomedical applications.

SYNTHESIS, CHARACTERIZATION AND THE APPLICABILITY OF β-CYCLODEXTRINS FUNCTIONALIZED MESOPOROUS SBA-15 MOLECULAR SIEVES

NANO ◽  
2013 ◽  
Vol 08 (05) ◽  
pp. 1350050
Author(s):  
MIN GUAN ◽  
HAI-PENG BI ◽  
ZUYUAN WANG ◽  
SHAOHUA BU ◽  
LING HUANG ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Molecular Sieves ◽  
Nitrogen Adsorption ◽  
X Ray Diffraction ◽  
X Ray ◽  
Adsorption Capacities ◽  
Transmission Electron ◽  
Potential Applications ◽  
Adsorption Desorption

Mesoporous silicas SBA-15 are modified with β-Cyclodextrins (β-CD) by simple grafting method. β-CD functionalized SBA-15 was characterized by Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), nitrogen adsorption–desorption measurements, thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). Furthermore, the applicability of it is investigated through studying the adsorption properties of clenbuterol. It showed better adsorption capacities of clenbuterol than pure SBA-15. β-CD functionalized SBA-15 material has the potential applications in the treatment of clenbuterol contamination in food and environment science.

scholarly journals Synthesis and Characterization of Sr-Doped ZnSe Nanoparticles for Catalytic and Biological Activities

Water ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2189
Author(s):  
V. Beena ◽  
S. L. Rayar ◽  
S. Ajitha ◽  
Awais Ahmad ◽  
Munirah D. Albaqami ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Antibacterial Activity ◽  
Methyl Orange ◽  
Photoelectron Spectroscopy ◽  
Biological Activities ◽  
Water Remediation ◽  
Precipitation Method ◽  
Znse Nanoparticles ◽  
X Ray ◽  
Degradation Of Methyl Orange

The development of cost-effective and ecofriendly approaches toward water purification and antibacterial activity is a hot research topic in this era. Purposely, strontium-doped zinc selenide (Sr-doped ZnSe) nanoparticles, with different molar ratios of Sr2+ cations (0.01, 0.05, and 0.1), were prepared via the co-precipitation method, in which sodium borohydride (NaBH4) and 2-mercaptoethanol were employed as reducing and stabilizing agents, respectively. The ZnSe cubic structure expanded by Sr2+ cations was indicated by X-ray diffraction (XRD) analysis. The absorption of the chemical compounds on the surface was observed via Fourier transform infrared (FT-IR) spectroscopy. The optical orientation was measured by ultraviolet–visible diffused reflectance spectroscopy (UV-DRS) analysis. The surface area, morphology, and elemental purity were analyzed using field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), and energy-dispersive spectroscopy (EDS) analyses. The oxidation state and valency of the synthesized nanoparticles were analyzed using X-ray photoelectron spectroscopy (XPS). Sr-doped ZnSe nanoparticles were investigated for photocatalytic degradation of methyl orange (MO), and their antibacterial potential was investigated against different bacterial strains. The antibacterial activity examined against Staphylococcus aureus and Escherichia coli implied the excellent biological activity of the nanoparticles. Moreover, the Sr-doped ZnSe nanoparticles were evaluated by the successful degradation of methyl orange under visible light irradiation. Therefore, Sr-doped ZnSe nanoparticles have tremendous potential in biological and water remediation fields.

Laser-Based Fabrication of Carbon Nanotube–Metal Composites on a Polymer Substrate: Experimental Study and Characterizations

2020 ◽  
Vol 142 (9) ◽  
Author(s):  
Zheng Kang ◽  
Jitendra Kumar Tripathi ◽  
Muxuan Wang ◽  
Ahmed Hassanein ◽  
Benxin Wu
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotube ◽  
Photoelectron Spectroscopy ◽  
Composite Films ◽  
Polymer Substrate ◽  
Metal Composite ◽  
X Ray ◽  
Polyimide Substrate ◽  
Transmission Electron ◽  
Potential Applications

Abstract Flexible electronic devices have several advantages and multiple current or potential applications. However, the reliability and durability of their metal components (which often exist) may suffer from large and repeated strains during many applications. Carbon nanotube (CNT)-metal composite films that were laser-sintered on flexible substrates were shown to be very promising in addressing the reliability and durability issues. However, to the authors’ best knowledge, CNT–metal interfaces in a laser-sintered CNT–metal composite film on a polymer substrate and the composite–polymer interface have not been sufficiently characterized and understood. In this paper, CNT–silver composite films were produced on polyimide substrates by laser sintering, and the fabricated samples were characterized through scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. Under the conditions studied, it has been found that: (1) for the CNT–silver interfaces in the composite, a significant amount of Ag–C chemical bonds is unlikely to exist, and (2) for the composite–polyimide interface, mechanical interlocking is expected to play an important role in the interfacial adhesion, while a significant diffusion of silver into the polyimide substrate is not observed. Besides, chemical reactions have likely occurred around the interface, causing the formation of Ag2O due to the reaction between silver from the composite and oxygen (in a certain form) from the polyimide substrate.

ZnS NANOFLOWERS ON GRAPHENE FOR USE AS A HIGH-PERFORMANCE PHOTOCATALYST

NANO ◽  
2014 ◽  
Vol 09 (08) ◽  
pp. 1450097 ◽  
Author(s):  
ZENG BIN ◽  
LONG HUI
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
Dye Degradation ◽  
Uv Light ◽  
Xps Spectra ◽  
X Ray ◽  
Transmission Electron ◽  
Photocatalytic Activities ◽  
Potential Applications

The nanocomposites of graphene loaded– ZnS nanoflowers (GR– ZnS ) had been successfully prepared. Materials were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectra (FTIR), photoluminescence (PL) and X-ray photoelectron spectroscopy (XPS) spectra. A possible formation mechanism of this architecture was proposed. The experimental results revealed that these nanoflowers exhibited excellent UV-light photocatalytic activities for pollutant methyl orange (MO) dye degradation. These new nanostructures were expected to show considerable potential applications in the water treatment.

Study on the Gas Sensitivity of a CeO2 Based Ceramic Sensing Element: Structure and Characteristic

2007 ◽  
Vol 280-283 ◽  
pp. 305-310
Author(s):  
Tao Yan ◽  
Xiao Lin Liu ◽  
Jian Feng Chen
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Sensing Element ◽  
Gas Sensitivity ◽  
X Ray ◽  
Sensing Properties ◽  
Surface Areas ◽  
Electron Microscopy Analysis

The sensitivity of CuO dispersed on fluorite-type oxide, namely CeO2 was studied in this work. Mixed oxide sample of nanostructured CuxCe1-xO2-y of various composition were generated by step chemical precipitation method. Distinct copper species were identified as a function of copper content by X-ray photoelectron spectroscopy, X-ray powder diffraction, the special surface areas, transmission electron microscopy, scanning electron microscopy analysis, and sensing properties to CO. It was found that only small amounts of copper are sufficient to promote the sensitivity of CeO2 by several orders of magnitude, which excessive amounts of copper (Cu/(Cu+Ce)>0.12) are detrimental to the sensing properties of nanocompositions. The possible causes for this behavior are also discussed.

Sign in / Sign up

Export Citation Format

Share Document