scholarly journals Model Contrast of Autonomous Vehicle Impacts on Traffic

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Derek Hungness ◽  
Raj Bridgelall

The adoption of connected and autonomous vehicles (CAVs) is in its infancy. Therefore, very little is known about their potential impacts on traffic. Meanwhile, researchers and market analysts predict a wide range of possibilities about their potential benefits and the timing of their deployments. Planners traditionally use various types of travel demand models to forecast future traffic conditions. However, such models do not yet integrate any expected impacts from CAV deployments. Consequently, many long-range transportation plans do not yet account for their eventual deployment. To address some of these uncertainties, this work modified an existing model for Madison, Wisconsin. To compare outcomes, the authors used identical parameter changes and simulation scenarios for a model of Gainesville, Florida. Both models show that with increasing levels of CAV deployment, both the vehicle miles traveled and the average congestion speed will increase. However, there are some important exceptions due to differences in the road network layout, geospatial features, sociodemographic factors, land-use, and access to transit.

Author(s):  
Jesse Cohn ◽  
Richard Ezike ◽  
Jeremy Martin ◽  
Kwasi Donkor ◽  
Matthew Ridgway ◽  
...  

As investments in autonomous vehicle (AV) technology continue to grow, agencies are beginning to consider how AVs will affect travel behavior within their jurisdictions and how to respond to this new mobility technology. Different autonomous futures could reduce, perpetuate, or exacerbate existing transportation inequities. This paper presents a regional travel demand model used to quantify how transportation outcomes may differ for disadvantaged populations in the Washington, D.C. area under a variety of future scenarios. Transportation performance measures examined included job accessibility, trip duration, trip distance, mode share, and vehicle miles traveled. The model evaluated changes in these indicators for disadvantaged and non-disadvantaged communities under scenarios when AVs were primarily single-occupancy or high-occupancy, and according to whether transit agencies responded to AVs by maintaining the status quo, removing low-performing routes, or applying AV technology to transit vehicles. Across the performance measures, the high-occupancy AV and enhanced transit scenarios provided an equity benefit, either mitigating an existing gap in outcomes between demographic groups or reducing the extent to which that gap was expanded.


2015 ◽  
Vol 27 (6) ◽  
pp. 660-670 ◽  
Author(s):  
Udara Eshan Manawadu ◽  
◽  
Masaaki Ishikawa ◽  
Mitsuhiro Kamezaki ◽  
Shigeki Sugano ◽  
...  

<div class=""abs_img""><img src=""[disp_template_path]/JRM/abst-image/00270006/08.jpg"" width=""300"" /> Driving simulator</div>Intelligent passenger vehicles with autonomous capabilities will be commonplace on our roads in the near future. These vehicles will reshape the existing relationship between the driver and vehicle. Therefore, to create a new type of rewarding relationship, it is important to analyze when drivers prefer autonomous vehicles to manually-driven (conventional) vehicles. This paper documents a driving simulator-based study conducted to identify the preferences and individual driving experiences of novice and experienced drivers of autonomous and conventional vehicles under different traffic and road conditions. We first developed a simplified driving simulator that could connect to different driver-vehicle interfaces (DVI). We then created virtual environments consisting of scenarios and events that drivers encounter in real-world driving, and we implemented fully autonomous driving. We then conducted experiments to clarify how the autonomous driving experience differed for the two groups. The results showed that experienced drivers opt for conventional driving overall, mainly due to the flexibility and driving pleasure it offers, while novices tend to prefer autonomous driving due to its inherent ease and safety. A further analysis indicated that drivers preferred to use both autonomous and conventional driving methods interchangeably, depending on the road and traffic conditions.


2021 ◽  
Vol 20 (5s) ◽  
pp. 1-22
Author(s):  
Arnav Malawade ◽  
Mohanad Odema ◽  
Sebastien Lajeunesse-degroot ◽  
Mohammad Abdullah Al Faruque

Autonomous vehicles (AV) are expected to revolutionize transportation and improve road safety significantly. However, these benefits do not come without cost; AVs require large Deep-Learning (DL) models and powerful hardware platforms to operate reliably in real-time, requiring between several hundred watts to one kilowatt of power. This power consumption can dramatically reduce vehicles’ driving range and affect emissions. To address this problem, we propose SAGE: a methodology for selectively offloading the key energy-consuming modules of DL architectures to the cloud to optimize edge, energy usage while meeting real-time latency constraints. Furthermore, we leverage Head Network Distillation (HND) to introduce efficient bottlenecks within the DL architecture in order to minimize the network overhead costs of offloading with almost no degradation in the model’s performance. We evaluate SAGE using an Nvidia Jetson TX2 and an industry-standard Nvidia Drive PX2 as the AV edge, devices and demonstrate that our offloading strategy is practical for a wide range of DL models and internet connection bandwidths on 3G, 4G LTE, and WiFi technologies. Compared to edge-only computation, SAGE reduces energy consumption by an average of 36.13% , 47.07% , and 55.66% for an AV with one low-resolution camera, one high-resolution camera, and three high-resolution cameras, respectively. SAGE also reduces upload data size by up to 98.40% compared to direct camera offloading.


In this paper, we propose a method to automatically segment the road area from the input road images to support safe driving of autonomous vehicles. In the proposed method, the semantic segmentation network (SSN) is trained by using the deep learning method and the road area is segmented by utilizing the SSN. The SSN uses the weights initialized from the VGC-16 network to create the SegNet network. In order to fast the learning time and to obtain results, the class is simplified and learned so that it can be divided into two classes as the road area and the non-road area in the trained SegNet CNN network. In order to improve the accuracy of the road segmentation result, the boundary line of the road region with the straight-line component is detected through the Hough transform and the result is shown by dividing the accurate road region by combining with the segmentation result of the SSN. The proposed method can be applied to safe driving support by autonomously driving the autonomous vehicle by automatically classifying the road area during operation and applying it to the road area departure warning system


Author(s):  
Fanta Camara ◽  
Charles Fox

AbstractUnderstanding pedestrian proxemic utility and trust will help autonomous vehicles to plan and control interactions with pedestrians more safely and efficiently. When pedestrians cross the road in front of human-driven vehicles, the two agents use knowledge of each other’s preferences to negotiate and to determine who will yield to the other. Autonomous vehicles will require similar understandings, but previous work has shown a need for them to be provided in the form of continuous proxemic utility functions, which are not available from previous proxemics studies based on Hall’s discrete zones. To fill this gap, a new Bayesian method to infer continuous pedestrian proxemic utility functions is proposed, and related to a new definition of ‘physical trust requirement’ (PTR) for road-crossing scenarios. The method is validated on simulation data then its parameters are inferred empirically from two public datasets. Results show that pedestrian proxemic utility is best described by a hyperbolic function, and that trust by the pedestrian is required in a discrete ‘trust zone’ which emerges naturally from simple physics. The PTR concept is then shown to be capable of generating and explaining the empirically observed zone sizes of Hall’s discrete theory of proxemics.


2020 ◽  
Vol 10 (9) ◽  
pp. 3180 ◽  
Author(s):  
Dongfang Dang ◽  
Feng Gao ◽  
Qiuxia Hu

Vehicles are highly coupled and multi-degree nonlinear systems. The establishment of an appropriate vehicle dynamical model is the basis of motion planning for autonomous vehicles. With the development of autonomous vehicles from L2 to L3 and beyond, the automatic driving system is required to make decisions and plans in a wide range of speeds and on bends with large curvature. In order to make precise and high-quality control maneuvers, it is important to account for the effects of dynamical coupling in these working conditions. In this paper, a new single-coupled dynamical model (SDM) is proposed to deal with the various dynamical coupling effects by identifying and simplifying the complicated one. An autonomous vehicle motion planning problem is then formulated using the nonlinear model predictive control theory (NMPC) with the SDM constraint (NMPC-SDM). We validated the NMPC-SDM with hardware-in-the-loop (HIL) experiments to evaluate improvements to control performance by comparing with the planners original design, using the kinematic and single-track models. The comparative results show the superiority of the proposed motion planning algorithm in improving the maneuverability and tracking performance.


2017 ◽  
Vol 2606 (1) ◽  
pp. 106-114 ◽  
Author(s):  
Lewis M. Clements ◽  
Kara M. Kockelman

Connected and fully automated or autonomous vehicles (CAVs) may soon dominate the automotive industry. Once CAVs are sufficiently reliable and affordable, they will penetrate markets and thereby generate economic ripple effects throughout industries. This paper synthesizes and expands on existing analyses of the economic effects of CAVs in the United States across 13 industries and the overall economy. CAVs will soon be central to the automotive industry, with software composing a greater share of vehicle value than previously. The number of vehicles purchased each year may fall because of vehicle sharing, but rising travel distances may increase vehicle sales. The opportunity for heavy-truck drivers to do other work or rest during long drives may lower freight costs and increase capacity. Personal transport may shift toward shared autonomous vehicle fleet use, reducing that of taxis, buses, and other forms of group travel. Fewer collisions and more law-abiding vehicles will lower demand for auto repair, traffic police, medical, insurance, and legal services. CAVs will also lead to new methods for managing travel demand and the repurposing of curbside and off-street parking and will generate major savings from productivity gains during hands-free travel and reduction of pain and suffering costs from crashes. If CAVs eventually capture a large share of the automotive market, they are estimated to have economic impacts of $1.2 trillion or $3,800 per American per year. This paper presents important considerations for CAVs’ overall effects and quantifies those impacts.


Author(s):  
Michal Hochman ◽  
Tal Oron-Gilad

This study explored pedestrians’ understanding of Fully Autonomous Vehicle (FAV) intention and what influences their decision to cross. Twenty participants saw fixed simulated urban road crossing scenes with a FAV present on the road. The scenes differed from one another in the FAV’s messages: the external Human-Machine Interfaces (e-HMI) background color, message type and modality, the FAV’s distance from the crossing place, and its size. Eye-tracking data and objective measurements were collected. Results revealed that pedestrians looked at the e-HMI before making their decision; however, they did not always make the decision according to the e-HMIs’ color, instructions (in advice messages), or intention (in status messages). Moreover, when they acted according to the e-HMI proposition, for certain distance conditions, they tended to hesitate before making the decision. Findings suggest that pedestrians’ decision making to cross depends on a combination of the e-HMI implementation and the car distance. Future work should explore the robustness of the findings in dynamic and more complex crossing environments.


Vehicles ◽  
2021 ◽  
Vol 3 (4) ◽  
pp. 764-777
Author(s):  
Dario Niermann ◽  
Alexander Trende ◽  
Klas Ihme ◽  
Uwe Drewitz ◽  
Cornelia Hollander ◽  
...  

The quickly rising development of autonomous vehicle technology and increase of (semi-) autonomous vehicles on the road leads to an increased demand for more sophisticated human–machine-cooperation approaches to improve trust and acceptance of these new systems. In this work, we investigate the feeling of discomfort of human passengers while driving autonomously and the automatic detection of this discomfort with several model approaches, using the combination of different data sources. Based on a driving simulator study, we analyzed the discomfort reports of 50 participants for autonomous inner city driving. We found that perceived discomfort depends on the driving scenario (with discomfort generally peaking in complex situations) and on the passenger (resulting in interindividual differences in reported discomfort extend and duration). Further, we describe three different model approaches on how to predict the passenger discomfort using data from the vehicle’s sensors as well as physiological and behavioral data from the passenger. The model’s precision varies greatly across the approaches, the best approach having a precision of up to 80%. All of our presented model approaches use combinations of linear models and are thus fast, transparent, and safe. Lastly, we analyzed these models using the SHAP method, which enables explaining the models’ discomfort predictions. These explanations are used to infer the importance of our collected features and to create a scenario-based discomfort analysis. Our work demonstrates a novel approach on passenger state modelling with simple, safe, and transparent models and with explainable model predictions, which can be used to adapt the vehicles’ actions to the needs of the passenger.


2018 ◽  
Author(s):  
Igor Radun ◽  
Jenni Radun ◽  
Jyrki Kaistinen ◽  
Jake Olivier ◽  
Göran Kecklund ◽  
...  

Unlike hypothetical trolley problem studies and an ongoing ethical dilemma with autonomous vehicles, road users can face similar ethical dilemmas in real life. Swerving a heavy vehicle towards the road-side in order to avoid a head-on crash with a much lighter passenger car is often the only option available which could save lives. However, running off-road increases the probability of a roll-over and endangers the life of the heavy vehicle driver. We have created an experimental survey study in which heavy vehicle drivers randomly received one of two possible scenarios. We found that responders were more likely to report they would ditch their vehicle in order to save the hypothetical driver who fell asleep than to save the driver who deliberately diverted their car towards the participant’s heavy vehicle. Additionally, the higher the empathy score, the higher the probability of ditching a vehicle. Implications for autonomous vehicle programming are discussed.


Sign in / Sign up

Export Citation Format

Share Document