scholarly journals Numerical and Analytical Investigation for Darcy-Forchheimer Flow of a Williamson Fluid over a Riga Plate with Double Stratification and Cattaneo-Christov Dual Flux

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
S. Eswaramoorthi ◽  
Nazek Alessa ◽  
M. Sangeethavaanee ◽  
Ngawang Namgyel
Keyword(s):  
Nusselt Number ◽  
Skin Friction ◽  
Local Nusselt Number ◽  
Viscous Fluids ◽  
Fluid Temperature ◽  
Williamson Fluid ◽  
Injection Parameter ◽  
Riga Plate ◽  
The Impact ◽  
Forchheimer Flow

The Darcy-Forchheimer flow of a Williamson fluid over a Riga plate was analyzed in this paper. Energy and mass equations are modeled with Cattaneo-Christov theory and double stratifications. The governing PDE models are altered into ODE models. These models are numerically solved by MATLAB bvp4c and analytically solved by the homotopy analysis method. The impact of governing flow parameters on fluid velocity, fluid temperature, fluid concentration, skin-friction coefficient, local Nusselt number, and local Sherwood number is scrutinized via graphs and tables. We acknowledged that the speed of the fluid becomes diminishes for more presence of porosity parameter. Also, we noted that the thermal and solutal boundary layer thicknesses are waning due to their corresponding stratification parameters. In addition, the maximum decreasing percentage of skin friction is obtained when the suction/injection parameter varies from 0.0 to 0.4 for Williamson and viscous fluids. The maximum increasing percentage of local Nusselt number occurs when the suction/injection parameter varies from 0.4 to 0.8 for Williamson and viscous fluids.

Impact of Joule heating and viscous dissipation on magnetohydrodynamics boundary layer flow of viscous nanofluid subject to the stretched surface

2021 ◽  
pp. 095440892110641
Author(s):  
M. Riaz Khan ◽  
Awatef Abidi ◽  
Jamel Madiouli ◽  
Kamel Guedri ◽  
A.M. Al-Bugami ◽  
...  
Keyword(s):  
Nusselt Number ◽  
Differential Equations ◽  
Skin Friction ◽  
Viscous Dissipation ◽  
Joule Heating ◽  
Base Fluid ◽  
Fluid Temperature ◽  
Suction Parameter ◽  
Nanoparticles Concentration ◽  
The Impact

The two-dimensional magnetohydrodynamics incompressible flow of nanofluid about a stretching surface is investigated with the existence of viscous dissipation and Joule heating. Moreover, the impact of the convective condition and mass suction is applied with the viscous nanofluid containing copper nanoparticles and the base fluid water. The similarity variables have been employed to transform the coupled nonlinear partial differential equations into the ordinary differential equations and the numerical scheme bp4c is implemented for the further analysis of the solution. The diverse results of temperature, skin friction coefficient, velocity, and the Nusselt number according to numerous parameters have been shown graphically. It appears that the Nusselt number and the skin friction reduces, which is caused by the enhancement of both Hartman number and nanoparticles concentration. Moreover, the fluid temperature surges with the growth of Biot number, and Eckert number whereas the growth of nanoparticles concentration and suction parameter diminishes the velocity and temperature profile. The inclusion of a significant quantity of nanoparticles in the base fluid increases the density of the corresponding nanofluids and accordingly the temperature of the coupled nanoparticles in the base fluids can be modified. Hence, nanofluids build an outstanding performance in electronic components appliances and other electrical devices. The existing research is further effective in refrigerators for stabilizing their rate of cooling.

scholarly journals EFFECT OF HEAT AND MASS TRANSFER AND THERMAL RADIATION ON A STEADY MHD CONVECTIVE FLOW WITH VISCOUS DISSIPATION AND SUCTION/INJECTION

2022 ◽  
Vol 52 (1) ◽  
pp. 35-41
Author(s):  
Silpisikha Goswami ◽  
Kamalesh Kumar Pandit ◽  
Dipak Sarma
Keyword(s):  
Nusselt Number ◽  
Thermal Radiation ◽  
Temperature Profile ◽  
Skin Friction ◽  
Viscous Dissipation ◽  
Sherwood Number ◽  
Fluid Velocity ◽  
Physical Parameters ◽  
Flow Equations ◽  
The Impact

Our motive is to examine the impact of thermal radiation and suction or injection with viscous dissipation on an MHD boundary layer flow past a vertical porous stretched sheet immersed in a porous medium. The set of the flow equations is converted into a set of non-linear ordinary differential equations by using similarity transformation. We use Runge Kutta method and shooting technique in MATLAB Package to solve the set of equations. The impact of non-dimensional physical parameters on flow profiles is analysed and depicted in graphs. We observe the influence of non-dimensional physical quantities on the Nusselt number, the Sherwood number, and skin friction and presented in tables. A comparison of the obtained numerical results with existing results in a limiting sense is also presented. We enhance radiation to observe the deceleration of fluid velocity and temperature profile for both suction and injection. While enhancing porosity parameter accelerates velocity whereas decelerates temperature profile. As the heat source parameter increases, the temperature of the fluid decreases for both suction and injection, it has been found. With the increasing values of the radiation parameter, the skin friction and heat transfer rate decreases. Increasing magnetic parameter decelerates the skin friction, Nusselt number, and Sherwood number.

Hall Effects on Unsteady Magnetohydrodynamic Flow of a Nanofluid Past an Oscillatory Vertical Rotating Flat Plate Embedded in Porous Media

2021 ◽  
Vol 10 (2) ◽  
pp. 259-269
Author(s):  
M. Veera Krishna ◽  
N. Ameer Ahamad ◽  
Ali J. Chamkha
Keyword(s):  
Heat Transfer ◽  
Porous Media ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Local Nusselt Number ◽  
Hall Current ◽  
Skin Friction Coefficient ◽  
Engineering Industry ◽  
Hall Effects ◽  
The Impact

In the current investigative paper, the impact of Hall current on an unsteady magnetohydrodynamic liberated convection revolving flow of a nanofluid restricted with a uniform absorbent medium over an oscillatory moving vertical smooth plate with convective as well as diffusive frontier conditions has been reviewed. The non-dimensionalized governing differential equations by the appropriate frontier conditions are resolved by the perturbations technique. The impacts of the physical constants on the flow as well as the heat transfer features are displayed graphically and analyzed for Cu as well as Al2O3 nanoparticles. For the engineering industry, the skin friction coefficient, local Nusselt number, along with the Sherwood’s number are examined numerically in detail.

Hybrid nanofluid flow and heat transfer over a nonlinear permeable stretching/shrinking surface

2019 ◽  
Vol 29 (9) ◽  
pp. 3110-3127 ◽  
Author(s):  
Iskandar Waini ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Local Nusselt Number ◽  
Skin Friction Coefficient ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Shrinking Surface

PurposeThis paper aims to investigate the steady flow and heat transfer of a Cu-Al2O3/water hybrid nanofluid over a nonlinear permeable stretching/shrinking surface with radiation effects. The surface velocity condition is assumed to be of the power-law form with an exponent of 1/3. The governing equations of the problem are converted into a system of similarity equations by using a similarity transformation.Design/methodology/approachThe problem is solved numerically using the boundary value problem solver (bvp4c) in Matlab software. The results of the skin friction coefficient and the local Nusselt number as well as the velocity and temperature profiles are presented through graphs and tables for several values of the parameters. The effects of these parameters on the flow and heat transfer characteristics are examined and discussed.FindingsResults found that dual solutions exist for a certain range of the stretching/shrinking and suction parameters. The increment of the skin friction coefficient and reduction of the local Nusselt number on the shrinking sheet is observed with the increasing of copper (Cu) nanoparticle volume fractions for the upper branch. The skin friction coefficient and the local Nusselt number increase when suction parameter is increased for the upper branch. Meanwhile, the temperature increases in the presence of the radiation parameter for both branches.Originality/valueThe problem of Cu-Al2O3/water hybrid nanofluid flow and heat transfer over a nonlinear permeable stretching/shrinking surface with radiation effects is the important originality of the present study where the dual solutions for the flow reversals are obtained.

Natural convection flow in a vertical micro-annulus with time-periodic thermal boundary conditions

2018 ◽  
Vol 14 (5) ◽  
pp. 1064-1081
Author(s):  
Basant Kumar Jha ◽  
Michael O. Oni
Keyword(s):  
Nusselt Number ◽  
Natural Convection ◽  
Boundary Conditions ◽  
Skin Friction ◽  
Convection Flow ◽  
Natural Convection Flow ◽  
Content Type ◽  
Thermal Boundary Conditions ◽  
The Impact ◽  
Time Periodic

PurposeThe purpose of this paper is to investigate the impact of time-periodic thermal boundary conditions on natural convection flow in a vertical micro-annulus.Design/methodology/approachAnalytical solution in terms of Bessel’s function and modified Bessel’s function of order 0 and 1 is obtained for velocity, temperature, Nusselt number, skin friction and mass flow rate.FindingsIt is established that the role of Knudsen number and fluid–wall interaction parameter is to decrease fluid temperature, velocity, Nusselt number and skin friction.Research limitations/implicationsNo laboratory practical or experiment was conducted.Practical implicationsCooling device in electronic panels, card and micro-chips is frequently cooled by natural convection.Originality/valueIn view of the amount of works done on natural convection in microchannel, it becomes interesting to investigate the effect that time-periodic heating has on natural convection flow in a vertical micro-annulus. The purpose of this paper is to examine the impact of time-periodic thermal boundary conditions on natural convection flow in a vertical micro-annulus.

scholarly journals Effects of Slip and Heat Generation/Absorption on MHD Mixed Convection Flow of a Micropolar Fluid over a Heated Stretching Surface

2010 ◽  
Vol 2010 ◽  
pp. 1-20 ◽  
Author(s):  
Mostafa Mahmoud ◽  
Shimaa Waheed
Keyword(s):  
Nusselt Number ◽  
Friction Coefficient ◽  
Mixed Convection ◽  
Skin Friction ◽  
Heat Generation ◽  
Local Nusselt Number ◽  
Skin Friction Coefficient ◽  
Convection Flow ◽  
Local Skin ◽  
Local Skin Friction

A theoretical analysis is performed to study the flow and heat transfer characteristics of magnetohydrodynamic mixed convection flow of a micropolar fluid past a stretching surface with slip velocity at the surface and heat generation (absorption). The transformed equations solved numerically using the Chebyshev spectral method. Numerical results for the velocity, the angular velocity, and the temperature for various values of different parameters are illustrated graphically. Also, the effects of various parameters on the local skin-friction coefficient and the local Nusselt number are given in tabular form and discussed. The results show that the mixed convection parameter has the effect of enhancing both the velocity and the local Nusselt number and suppressing both the local skin-friction coefficient and the temperature. It is found that local skin-friction coefficient increases while the local Nusselt number decreases as the magnetic parameter increases. The results show also that increasing the heat generation parameter leads to a rise in both the velocity and the temperature and a fall in the local skin-friction coefficient and the local Nusselt number. Furthermore, it is shown that the local skin-friction coefficient and the local Nusselt number decrease when the slip parameter increases.

Computational Study of Three-Dimensional Stagnation Point Nanofluid Bioconvection Flow on a Moving Surface With Anisotropic Slip and Thermal Jump Effect

2016 ◽  
Vol 138 (10) ◽  
Author(s):  
M. J. Uddin ◽  
W. A. Khan ◽  
A. I. Md. Ismail ◽  
O. Anwar Bég
Keyword(s):  
Nusselt Number ◽  
Skin Friction ◽  
Stagnation Point ◽  
Local Nusselt Number ◽  
Local Density ◽  
Three Dimensional ◽  
Velocity Slip ◽  
Slip Parameter ◽  
Moving Surface ◽  
Local Skin

The effects of anisotropic slip and thermal jump on the three-dimensional stagnation point flow of nanofluid containing microorganisms from a moving surface have been investigated numerically. Anisotropic slip takes place on geometrically striated surfaces and superhydrophobic strips. Zero mass flux of nanoparticles at the surface is applied to achieve practically applicable results. Using appropriate similarity transformations, the transport equations are reduced to a system of nonlinear ordinary differential equations with coupled boundary conditions. Numerical solutions are reported by means of very efficient numerical method provided by the symbolic code Maple. The influences of the emerging parameters on the dimensionless velocity, temperature, nanoparticle volumetric fraction, density of motile microorganism profiles, as well as the local skin friction coefficient, the local Nusselt number, and the local density of the motile microorganisms are displayed graphically and illustrated in detail. The computations demonstrate that the skin friction along the x-axis is enhanced with the velocity slip parameter along the y-axis. The converse response is observed for the dimensionless skin friction along the y-axis. The heat transfer rate is increased with greater velocity slip effects but depressed with the thermal slip parameter. The local Nusselt number is increased with Prandtl number and decreased with the thermophoresis parameter. The local density for motile microorganisms is enhanced with velocity slip parameters and depressed with the bioconvection Lewis number, thermophoresis, and Péclet number. Numerical results are validated where possible with published results and excellent correlation is achieved.

scholarly journals Magnetohydrodynamic Hybrid Nanofluid Flow Past an Exponentially Stretching Sheet with Slip Conditions

Mathematics ◽  
2021 ◽  
Vol 9 (24) ◽  
pp. 3291
Author(s):  
Abdul Samad Khan ◽  
He-Yong Xu ◽  
Waris Khan
Keyword(s):  
Nusselt Number ◽  
Differential Equations ◽  
Skin Friction ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Slip Parameter ◽  
Nanofluid Flow ◽  
Slip Conditions ◽  
Exponentially Stretching ◽  
The Impact

This study presents the magnetized hybrid nanofluid flow with heat source/sink over an exponentially stretching/shrinking sheet. Slip conditions are implemented to analyze the hybrid nanofluid flow for both slip and no-slip conditions. Additionally, the hybrid nanofluid of alumina and copper (hybrid nanoparticles) with blood (base fluid) has been considered and discussed with both suction and injection parameters. The appropriate similarity variables are used to convert partial differential equations (PDEs) into ordinary differential equations (ODEs) and solved analytically with the help of the homotopy analysis method (HAM). The impact of different embedded parameters has been shown in the form of graphs and tables. The numerical values of skin friction and Nusselt number are presented in the form of Tables for both slip and no-slip cases. It is summarized that the upsurge of the velocity slip parameter and magnetic parameter increases the skin friction, while the rising of the thermal slip parameter and heat generation parameter decreases the Nusselt number.

scholarly journals Numerical Treatment for Darcy-Forchheimer Flow of Sisko Nanomaterial with Nonlinear Thermal Radiation by Lobatto IIIA Technique

2019 ◽  
Vol 2019 ◽  
pp. 1-15 ◽  
Author(s):  
Iftikhar Uddin ◽  
Rizwan Akhtar ◽  
Zhu Zhiyu ◽  
Saeed Islam ◽  
Muhammad Shoaib ◽  
...  
Keyword(s):  
Nusselt Number ◽  
Velocity Profile ◽  
Thermal Radiation ◽  
Skin Friction ◽  
Fluid Model ◽  
Dynamical Analysis ◽  
Physical Parameters ◽  
Nonlinear Thermal Radiation ◽  
Sisko Fluid ◽  
Forchheimer Flow

In this study, the competency of numerical computational framework based on Lobatto IIIA technique is utilized for dynamical analysis of the Darcy-Forchheimer flow of Sisko nanomaterial with nonlinear thermal radiation. The resultant PDEs of the Sisko fluid model expressions are transformed into system of nonlinear ODEs by exploiting the similarity variables. Graphical representations and numerical illustrations are used to envisage the characteristics of various physical parameters of interest on velocity profile, nanoparticles concentration, and temperature distribution of Sisko fluidic system. In addition, skin friction and Nusselt number are numerically examined with observation that the material parameter of Sisko fluid increases the velocity profile as well as Nusselt number while decreasing temperature, concentration profiles, and skin friction coefficient.

scholarly journals Three-Dimensional Flow and Heat Transfer Past a Permeable Exponentially Stretching/Shrinking Sheet in a Nanofluid

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Syahira Mansur ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Nusselt Number ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Local Nusselt Number ◽  
Three Dimensional ◽  
Lewis Number ◽  
Skin Friction Coefficient ◽  
Shrinking Sheet ◽  
Three Dimensional Flow ◽  
Flow And Heat Transfer

The three-dimensional flow and heat transfer of a nanofluid over a stretching/shrinking sheet is investigated. Numerical results are obtained using bvp4c in MATLAB. The results show nonunique solutions for the shrinking case. The effects of the stretching/shrinking parameter, suction parameter, Brownian motion parameter, thermophoresis parameter, and Lewis number on the local skin friction coefficient and the local Nusselt number are studied. Suction increases the solution domain. Furthermore, as the sheet is shrunk in thex-direction, suction increases the skin friction coefficient in the same direction while decreasing the skin friction coefficient in they-direction. The local Nusselt number is consistently lower for higher values of thermophoresis parameter and Lewis number. On the other hand, the local Nusselt number increases as the Brownian motion parameter increases.

Sign in / Sign up

Export Citation Format

Share Document