scholarly journals Application of Epoxy-Asphalt Composite in Asphalt Paving Industry: A Review with Emphasis on Physicochemical Properties and Pavement Performances

2021 ◽  
Vol 2021 ◽  
pp. 1-35
Author(s):  
Yu Chen ◽  
Nabil Hossiney ◽  
Xu Yang ◽  
Hainian Wang ◽  
Zhanping You
Keyword(s):  
Epoxy Resin ◽  
Mechanical Performance ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Elastic Behavior ◽  
Construction Time ◽  
Dominant Component ◽  
Epoxy Asphalt ◽  
Curing Methods ◽  
Asphalt Paving

One of the failure mechanisms associated with asphalt paving layers, especially on steel deck bridges, is large permanent deformation, which adversely affects its long-term performance in service. Thus, epoxy resin was introduced in asphalt paving industry to tackle permanent deformation of asphalt mixtures due to its thermosetting nature. In this review, epoxy resin as a dominant component of the epoxy-asphalt composite system was first considered, followed by a discussion on its curing methods and curing mechanism. Furthermore, the physicochemical property and mechanical performance of epoxy asphalt and epoxy asphalt mixture were thoroughly examined. Crosslink density of epoxy asphalt dictates its viscosity and thus the allowable construction time. Phase separation and dispersion of asphalt particles in the epoxy matrix was observed for epoxy-asphalt composite, and it showed superior elastic behavior and deformation resistance capability when compared with conventional asphalt materials. Furthermore, epoxy asphalt mixture exhibited significantly higher compressive strength, much better rutting resistance, and superior durability and water resistance properties. However, its low-temperature cracking resistance was slightly compromised.

scholarly journals MECHANICAL PERFORMANCE OF ASPHALT MIXTURE CONTAINING CUP LUMP RUBBER

2019 ◽  
Vol 81 (6) ◽  
Author(s):  
Norfazira Mohd Azahar ◽  
Norhidayah Abdul Hassan ◽  
Ramadhansyah Putra Jaya ◽  
Hasanan Md. Nor ◽  
Mohd Khairul Idham Mohd Satar ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Resilient Modulus ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
Dynamic Creep ◽  
Aging Conditions ◽  
Public Work Department ◽  
Indirect Tensile

The use of cup lump rubber as an additive in asphalt binder has recently become the main interest of the paving industry. The innovation helps to increase the natural rubber consumption and stabilize the rubber price. This study evaluates the mechanical performance of cup lump rubber modified asphalt (CMA) mixture in terms of resilient modulus, dynamic creep and indirect tensile strength under aging conditions. The CMA mixture was prepared using dense-graded Marshall-designed mix and the observed behavior was compared with that of conventional mixture. From the results, both mixtures passed the volumetric properties as accordance to Malaysian Public Work Department (PWD) specification. The addition of cup lump rubber provides better resistance against permanent deformation through the enhanced properties of resilient modulus and dynamic creep. Furthermore, the resilient modulus of CMA mixture performed better under aging conditions.  

Performance Characterization of Stone Mastic Asphalt using Steel Fiber

2021 ◽  
Vol 02 (02) ◽  
Author(s):  
Ekarizan Shaffie ◽  
◽  
H.A. Rashid ◽  
Fiona Shiong ◽  
Ahmad Kamil Arshad ◽  
...  
Keyword(s):  
Steel Fiber ◽  
Mechanical Performance ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Moisture Susceptibility ◽  
Mastic Asphalt ◽  
Bitumen Content ◽  
Stone Mastic Asphalt ◽  
The Stability ◽  
Marshall Stability

Stone Mastic Asphalt (SMA) is a gap-graded hot mixture designed to provide higher resistance towards permanent deformation and rutting potential by 30% to 40% more than dense-graded asphalt, due to its stable aggregate skeleton structure. However, compared to other types of hot mix asphalt, SMA unfortunately has some shortcomings in term of its susceptibility towards moisture-induced damage due to its structure and excessive bitumen content in the composition. This research aims to assess the performance of a SMA mixture with steel fiber by enhancing overall stability, abrasion resistance, and, most importantly, moisture susceptibility. This study involved the incorporation of various steel fiber proportions of 0%, 0.3%, 0.5% and 0.7% by the total weight of mixture. The steel fiber modified SMA was made up of 6.0% PEN 60/70 bitumen content. The performance of SMA were evaluated through Marshall stability and flow test, Cantabro loss test and indirect tensile strength test. The results obtained from the testing showed that the incorporation of steel fiber is significantly effective to enhance the resistance towards moisture damage, while increasing the stability and reducing the abrasion loss of SMA mixture, compared to conventional mixture. Overall, it can be concluded that the addition of steel fiber in asphalt mixture specifically SMA, has improved the mechanical performance in the application of asphalt pavement with the optimum steel fiber proportion of 0.3% by the weight of mixture. The developed models between the independent variables and responses demonstrated high levels of correlation. The study found that Response Surface Methodology (RSM) is an effective statistical method for providing an appropriate empirical model for relating parameters and predicting the optimum performance of an asphaltic mixture to reduce flexible pavement failure.

A Review of the Utilisation of Recycled Waste Material as an Alternative Modifier in Asphalt Mixtures

2020 ◽  
Vol 6 ◽  
pp. 42-60
Author(s):  
Abdalrhman Abrahim Milad ◽  
Ahmed Suliman B. Ali ◽  
Nur Izzi Md Yusoff
Keyword(s):  
Mechanical Performance ◽  
Permanent Deformation ◽  
Steel Slag ◽  
Asphalt Mixture ◽  
Construction Materials ◽  
Crumb Rubber ◽  
Asphalt Mixtures ◽  
Waste Material ◽  
Waste Materials ◽  
The Road

The possibility of using waste materials in road construction is of great interest as their utilisation may contribute to reducing the problems of hazard and pollution and conserve natural resources. Thus, there is an urgent need to find a sustainable method for using waste materials as a substitute in the standard asphalt binders. There are several concerns about the physical and chemical properties and mechanical performance of asphalt pavements incorporated with waste material in the effort to reduce permanent deformation of the road surface. This review article presents a brief discussion of the asphalt mixtures modified with waste material, and the recycled materials used as a modifier in the asphalt mixture. The present paper summarises the use of crumb rubber, crushed concrete, steel slag, glass fibre and plastic waste in asphalt mixtures. The use of waste materials as a modifier in asphalt mixture resulted in improved asphalt pavement performance. Results advocate that rubberised asphalt mixture with desired properties can be designed as an additive with a friendly environmental approach in construction materials. The researches that adopted the influence of usage, recycle waste material to improve the performance of the asphalt of the road are still limited compared to other construction fields. Doi: 10.28991/cej-2020-SP(EMCE)-05 Full Text: PDF

scholarly journals Effectiveness of Micro- and Nanomaterials in Asphalt Mixtures through Dynamic Modulus and Rutting Tests

2016 ◽  
Vol 2016 ◽  
pp. 1-14 ◽  
Author(s):  
Hui Yao ◽  
Zhanping You
Keyword(s):  
Dynamic Modulus ◽  
Mechanical Performance ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Test Results ◽  
Modified Asphalt ◽  
Overall Performance ◽  
Carbon Microfiber

The objectives of this research are to use micro- and nanomaterials to modify the asphalt mixture and to evaluate the mechanical performance of asphalt mixtures. These micro- and nanomaterials, including carbon microfiber, Nanomer material, nanosilica, nonmodified nanoclay, and polymer modified nanoclay, were selected to blend with the control asphalt to improve the overall performance of the modified asphalt binders and mixtures. The microstructures of original materials and asphalt binders were observed by the field emission scanning electron microscope (FE-SEM). The mixture performance tests were employed to evaluate the resistance to rutting and permanent deformation of the modified asphalt mixtures. Test results indicate that(1)the dynamic modulus of micro- and nanomodified asphalt mixtures improved significantly;(2)the rutting susceptibility of the modified asphalt mixtures was reduced significantly compared to that of the control asphalt mixture;(3)the microstructures of modified asphalt binders were different from the control asphalt, and the structures determine the improvement in the performance of modified asphalt mixtures. These results indicate that the addition of micro- and nanomaterials enhanced the rutting performance and strength of asphalt mixtures. In addition, the analysis of variance (ANOVA) was used to analyze the modifying effects of micro- and nanomaterials on the performance.

Evaluation of Permanent Deformation of BRA Modified Asphalt Paving Mixtures Based on Dynamic Creep Test Analysis

2016 ◽  
Vol 16 ◽  
pp. 69-81 ◽  
Author(s):  
Muhammad Karami ◽  
Ainalem Nega ◽  
Ahdyeh Mosadegh ◽  
Hamid Nikraz
Keyword(s):  
Creep Test ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Modified Asphalt ◽  
Nominal Size ◽  
Dynamic Creep ◽  
Asphalt Paving ◽  
Modified Binder

The main objective this study is to evaluate the permanent deformation of buton rock asphalt (BRA) modified asphalt paving mixtures using dynamic creep test so that long term deformation behavior of asphalt mixtures can be characterized. The dynamic creep test was conducted on unmodified and BRA modified asphalt mixture using UTM25 machine. Asphalt cement of C170 from a regional supplier in Western Australia was used as the base asphalt binder for unmodified asphalt mixture; and BRA modified asphalt mixtures were made by substituting the base asphalt with 10, 20, and 30% (by weight of total asphalt binder) natural binder continuing granular BRA modified binder. The granular (pellets) BRA modified binder with a diameter of 7-10 mm was produced and extracted according the Australia Standard. Crushed granite was taken from a local quarry of the region; and dense graded for both unmodified and BRA modified asphalt mixture with the nominal size of 10 mm was used. The results of this analysis showed that BRA modified had a good performance as compared with unmodified asphalt mixtures, and increase in the content modified binder to 10%, 20%, and 30% resulted in decrease of the total permanent strain.

Study on Performance of Epoxy Asphalt Concrete Applied in the Deck Pavement of Pingsheng Steel Bridge

2010 ◽  
Vol 150-151 ◽  
pp. 470-474 ◽  
Author(s):  
Wen Qiang Wang ◽  
Hua Yan He
Keyword(s):  
Asphalt Concrete ◽  
Performance Test ◽  
Mechanical Performance ◽  
Asphalt Mixture ◽  
Practical Case ◽  
Steel Bridge ◽  
Linear Contraction ◽  
Epoxy Asphalt ◽  
Resistance Performance ◽  
Epoxy Asphalt Concrete

As a fair deck pavement material of its kind used in steel bridge, the epoxy asphalt concrete is considered much more superior to ordinary asphalt concrete in terms of road performance, while still greatly subject to the level of design and construction. Starting from a practical case of the epoxy asphalt concrete that has been applied in the deck pavement of Pingsheng Steel Bridge, this paper centers on a comprehensive study and discussion of the epoxy asphalt mixture, specifically in aspects of physical and mechanical performance test of stability under high temperature, performance under low temperature, tortuosity, immersion stability, linear contraction performance, fatigue performance and oil-erosion resistance performance. This will provide positive instruction for future deck pavements on steel bridges.

Viscoelastic Analysis on High Temperature’s Stability of Asphalt Pavement

2009 ◽  
Vol 620-622 ◽  
pp. 719-722
Author(s):  
Hong Wang ◽  
Shao Peng Wu ◽  
Ling Pang
Keyword(s):  
High Temperature ◽  
Mechanical Performance ◽  
Asphalt Pavement ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Three Dimensional ◽  
The Road ◽  
Environment Temperature ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

Flexible pavement-asphalt mixture plays an important role in structures of the primary road and bridge at present. However, the mixture is a type of viscoelstic material and is sensitive to environment temperature, especially a high temperature. The permanent deformation due to high temperature and the material’s viscoelastic shorten the service life of the road and even lead to traffic accident. Therefore it is necessary to analyze the pavement’s mechanical performance. In the study, the viscoelastic constitutive equation of the mixture is transformed to Prony Series. The objective of this study is to characterize the stability of asphalt pavement at high temperatures with a three-dimensional finite element and accurately predict the pavement’s strain and stress in vehicle load.

scholarly journals Laboratory Assessment of Epoxy Asphalt Mixture Incorporating Tire Rubber Waste

2021 ◽  
Vol 9 (1) ◽  
pp. 1-10
Author(s):  
Shatha S. Hasan ◽  
Rasha H. Abd Al-Ameer ◽  
Haider A. Hassani
Keyword(s):  
High Performance ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Laboratory Assessment ◽  
Tire Rubber ◽  
Rubber Waste ◽  
Epoxy Asphalt ◽  
Road Paving

The use of epoxy asphalt in road paving is one of the promising solutions for long-life road pavements in service with minimal maintenance. However, the high cost still stands as an obstacle to the widespread use of this high-performance material. The use of tire rubber waste (TRW) is one of the solutions in order to reduce costs, improve the environment, and improve the performance of epoxy asphalt mixtures, in addition to alleviating the brittle behaviour that epoxy asphalt tends to. This study proposes to add TRW in improving epoxy asphalt produced in local laboratories by using phenol Novolac resin as an epoxy curing agent of the epoxy base inside asphalt binder to produce and evaluate improved epoxy asphalt. The percentage of epoxy base used was 25% of the asphalt binder mixed with a 1:1 ratio of epoxy to Novolac using potassium hydroxide (KOH) as a catalyst. Whereas the proportions of added TRW were (1%, 2%, and 3%) of the total mixture weight by using the dry mixing method. The results showed, at its best values at 2% of TRW, that there was an increase in Marshall stability by 10%, and Marshall flow remained within specification limits with a decrease in the value of air voids at the highest bulk density, and a slight decrease in indirect tensile strength by 2%, with remaining excellent resistance to moisture sensitivity at 94%, and improvement in resistance to permanent deformation (rutting) by 14%. This indicates an improvement in the improved epoxy asphalt mixtures by the addition of TRW compared to the reference epoxy asphalt mixtures.

scholarly journals Mechanical Performance of Gilsonite Modified Asphalt Mixture Containing Recycled Concrete Aggregate

2021 ◽  
Vol 11 (10) ◽  
pp. 4409
Author(s):  
Daniel Alberto Zuluaga-Astudillo ◽  
Hugo Alexander Rondón-Quintana ◽  
Carlos Alfonso Zafra-Mejía
Keyword(s):  
Mechanical Performance ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Coarse Fraction ◽  
Recycled Concrete ◽  
Concrete Aggregate ◽  
Recycled Concrete Aggregate ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates

Hot-mix asphalts exposed to hot weather and high traffic volumes can display rutting distress. A material that can be used to increase the stiffness of asphalt binders is gilsonite. On the other hand, from an environmental point of view, the virgin natural aggregates of asphalt mixtures can be replaced with recycled concrete aggregates. For these reasons, this study modified the asphalt binder with gilsonite by wet-process to improve rutting resistance, and replaced (by mass and volume) part of the coarse fraction of the aggregate with recycled concrete aggregate in two hot-mix asphalts with different gradations. Unlike other studies, a larger experimental phase was used here. Marshall, indirect tensile strength, resilient modulus, permanent deformation, fatigue resistance, and Cantabro tests were performed. An ANOVA test was carried out. If the replacement of the virgin aggregate by recycled concrete aggregates was made by volume, both materials (gilsonite and recycled concrete aggregate) could be used in hot-mix asphalts for thick-asphalt layers in high temperature climates and any level of traffic. The use of both materials in hot-mix asphalts is not recommended for thin-asphalt layers in low temperatures climates. It is not advisable to replace the aggregates by mass.

scholarly journals A Review of Nanomaterials’ Effect on Mechanical Performance and Aging of Asphalt Mixtures

2019 ◽  
Vol 9 (18) ◽  
pp. 3657 ◽  
Author(s):  
João Crucho ◽  
Luís Picado-Santos ◽  
José Neves ◽  
Silvino Capitão
Keyword(s):  
High Performance ◽  
Mechanical Performance ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Economic Feasibility ◽  
Asphalt Binders ◽  
Aging Resistance ◽  
Marshall Stability

This review addresses the effects of the modifications with nanomaterials, particularly nanosilica, nanoclays, and nanoiron, on the mechanical performance and aging resistance of asphalt mixtures. The desire for high-performance and long-lasting asphalt pavements significantly pushed the modification of the conventional paving asphalt binders. To cope with such demand, the use of nanomaterials for the asphalt binder modification seems promising, as with a small amount of modification an important enhancement of the asphalt mixture mechanical performance can be attained. Several studies already evaluated the effects of the modifications with nanomaterials, mostly focusing on the asphalt binder properties and rheology, and the positive findings encouraged the study of modified asphalt mixtures. This review focuses on the effects attained in the mechanical properties of the asphalt mixtures, under fresh and aged conditions. Generally, the effects of each nanomaterial were evaluated with the current state-of-art tests for the characterization of mechanical performance of asphalt mixtures, such as, permanent deformation, stiffness modulus, fatigue resistance, indirect tensile strength, and Marshall stability. Aging indicators, as the aging sensitivity, were used to evaluate the effects in the asphalt mixture’s aging resistance. Finally, to present a better insight into the economic feasibility of the analyzed nanomaterials, a simple cost analysis is performed.

Sign in / Sign up

Export Citation Format

Share Document