scholarly journals Enteric Coated Oral Delivery of Hydroxyapatite Nanoparticle for Modified Release Vitamin D3 Formulation

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Ranga K. Dissanayake ◽  
K. D. C. Perera ◽  
W. P. T. D. Perera ◽  
W. P. S. L. Wijesinghe ◽  
Janitha M. Unagolla
Keyword(s):  
Calcium Phosphate ◽  
Vitamin D3 ◽  
Oral Delivery ◽  
Vital Role ◽  
Burst Release ◽  
Target Tissue ◽  
Bone Homeostasis ◽  
Gastrointestinal Problems ◽  
Enteric Coated

Vitamin D3 (VD) and calcium phosphate play a vital role in bone homeostasis. Factors such as obesity or gastrointestinal problems can render the use of pure VD and calcium phosphate supplements ineffective. This study investigated the possibility of using VD-loaded hydroxyapatite nanoparticles for the codelivery of VD and Ca3(PO4)2. Due to the high affinity of Ca3(PO4)2 for bone tissue, HA is an ideal delivery system to deliver VD to target tissue. Herein, HA nanoparticles were synthesized and loaded with VD using a vacuum evaporation method. The synthesized HA-VD nanoparticles were morphologically and chemically characterized by SEM, FTIR, and TGA. The system exhibited a two-stage release pattern, which includes a first-day burst release (35%) and sustained release for a further ten days. The cytocompatibility and cell penetrative ability of the nanoparticle system were assessed in vitro using preosteoblast cells: the system is nontoxic and well-tolerated. Finally, the VD-loaded HA nanoparticles were coated with a gastroresistant polymer, hypromellose phtalate-55 (HP-55) in order to protect the pH-sensitive HA from degradation at lower pHs. A coaxial electrospray technique was employed to achieve this. In all, the tested HA-VD system is a viable alternative for codelivery of VD, Ca2+, and PO43- to their target tissues.

scholarly journals Composite Drug Delivery System Based on Amorphous Calcium Phosphate–Chitosan: An Efficient Antimicrobial Platform for Extended Release of Tetracycline

Pharmaceutics ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1659
Author(s):  
Anita Ioana Visan ◽  
Carmen Ristoscu ◽  
Gianina Popescu-Pelin ◽  
Mihai Sopronyi ◽  
Consuela Elena Matei ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Amorphous Calcium Phosphate ◽  
Extended Release ◽  
Composite Coatings ◽  
Burst Release ◽  
Large Area ◽  
Drug Release Profile ◽  
Composite Mixture ◽  
Drug Incorporation

One major warning emerging during the first worldwide combat against healthcare-associated infections concerns the key role of the surface in the storage and transfer of the virus. Our study is based on the laser coating of surfaces with an inorganic/organic composite mixture of amorphous calcium phosphate–chitosan–tetracycline that is able to fight against infectious agents, but also capable of preserving its activity for a prolonged time, up to several days. The extended release in simulated fluids of the composite mixture containing the drug (tetracycline) was demonstrated by mass loss and UV–VIS investigations. The drug release profile from our composite coatings proceeds via two stages: an initial burst release (during the first hours), followed by a slower evolution active for the next 72 h, and probably more. Optimized coatings strongly inhibit the growth of tested bacteria (Enterococcus faecalis and Escherichia coli), while the drug incorporation has no impact on the in vitro composite’s cytotoxicity, the coatings proving an excellent biocompatibility sustaining the normal development of MG63 bone-like cells. One may, therefore, consider that the proposed coatings’ composition can open the prospective of a new generation of antimicrobial coatings for implants, but also for nosocomial and other large area contamination prevention.

scholarly journals Enhancement of Oral Bioavailability of Puerarin by Polybutylcyanoacrylate Nanoparticles

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
Lixia Zhao ◽  
Anchang Liu ◽  
Min Sun ◽  
Jinsong Gu ◽  
Haigang Wang ◽  
...  
Keyword(s):  
Zeta Potential ◽  
Oral Bioavailability ◽  
Oral Delivery ◽  
Drug Carrier ◽  
In Vitro Release ◽  
Spherical Shape ◽  
Oral Drug ◽  
Burst Release ◽  
Vitro Release

The interest using novel drug delivery systems to improve oral bioavailability of drug with poor solubility is increasing. In this study, a new oral delivery system, polybutylcyanoacrylate nanoparticles (PBCNs), was introduced to improve the oral bioavailability of puerarin (PUE). PUE-loaded PBCN was successfully prepared by anionic polymerization method. Characterization of PUE-loaded PBCN was evaluated with morphology, size, zeta potential, and in vitro release study. The PBCN loading PUE exhibited a spherical shape under transmission electron microscopy with an average size of 159.4 nm, and the zeta potential was −15.0 mV. The in vitro release of PUE-loaded PBCN showed an initial burst release followed by a sustained release. Physicochemical state of PUE in PBCN was investigated by differential scanning colorimetry, X-ray diffraction, and Fourier transform infrared spectroscopy. The results indicated that PUE in PBCN was in a noncrystalline state. The oral pharmacokinetic study in rats showed that the relative bioavailability of PUE-encapsulated PBCN to the crude PUE was more than 550%. It can be concluded that PBCN as an oral drug carrier can significantly improve the oral bioavailability of PUE.

STEROID HORMONE METABOLISM IN RESPONSIVE TISSUES IN VITRO

1971 ◽  
Vol 68 (1_Suppl) ◽  
pp. S279-S294 ◽  
Author(s):  
Paul Robel
Keyword(s):  
Steroid Hormone ◽  
Physiological Activity ◽  
Physiological State ◽  
Target Cells ◽  
Target Tissue ◽  
Hormone Metabolism ◽  
Metabolizing Enzymes ◽  
Relationship Of

ABSTRACT Of the information available on steroid hormone metabolism in responsive tissues, only that relating hormone metabolism to physiological activity is reviewed, i. e. metabolite activity in isolated in vitro systems, binding of metabolites to target tissue receptors, specific steroid hormone metabolizing enzymes and relationship of hormone metabolism to target organ physiological state. Further, evidence is presented in the androgen field, demonstrating 5α-reduced metabolites, formed inside the target cells, as active compounds. This has led to a consideration of testosterone as a »prehormone«. The possibility that similar events take place in tissues responding to progesterone is discussed. Finally, the role of hormone metabolism in the regulation of hormone availability and/or renewal in target cells is discussed. In this context, reference is made to the potential role of plasma binding proteins and cytosol receptors.

EVALUATION OF TISSUE STEROID BINDING IN VITRO

1971 ◽  
Vol 68 (1_Suppl) ◽  
pp. S223-S246 ◽  
Author(s):  
C. R. Wira ◽  
H. Rochefort ◽  
E. E. Baulieu
Keyword(s):  
Protein Binding ◽  
Binding Sites ◽  
Experimental System ◽  
Specific Protein ◽  
Coupling Mechanism ◽  
Target Tissue ◽  
Protein Binding Sites ◽  
Definition Of ◽  
Hormone Specificity

ABSTRACT The definition of a RECEPTOR* in terms of a receptive site, an executive site and a coupling mechanism, is followed by a general consideration of four binding criteria, which include hormone specificity, tissue specificity, high affinity and saturation, essential for distinguishing between specific and nonspecific binding. Experimental approaches are proposed for choosing an experimental system (either organized or soluble) and detecting the presence of protein binding sites. Techniques are then presented for evaluating the specific protein binding sites (receptors) in terms of the four criteria. This is followed by a brief consideration of how receptors may be located in cells and characterized when extracted. Finally various examples of oestrogen, androgen, progestagen, glucocorticoid and mineralocorticoid binding to their respective target tissues are presented, to illustrate how researchers have identified specific corticoid and mineralocorticoid binding in their respective target tissue receptors.

Preparation and In Vitro Evaluation of Resealed Erythrocytes as A New Trend in Treatment of Asthma

2016 ◽  
Vol 6 (3) ◽  
Author(s):  
Mohammed Ibrahim ◽  
Alaa Zaky ◽  
Mohsen Afouna ◽  
Ahmed Samy
Keyword(s):  
In Vitro Release ◽  
Human Erythrocytes ◽  
The Body ◽  
Blood Levels ◽  
Time Interval ◽  
Burst Release ◽  
Prolonged Release ◽  
Nocturnal Asthma ◽  
Carrier Erythrocytes

Carrier erythrocytes are emerging as one of the most promising biological drug delivery systems investigated in recent decades. Beside its biocompatibility, biodegradability and ability to circulate throughout the body, it has the ability to perform extended release system of the drug for a long period. The ultimate goal of this study is to introduce a new carrier system for Salbutamol, maintaining suitable blood levels for a long time, as atrial to resolve the problems of nocturnal asthma medication Therefore in this work we study the effect of time, temperature as well as concentration on the loading of salbutamol in human erythrocytes to be used as systemic sustained release delivery system for this drug. After the loading process is performed the carrier erythrocytes were physically and cellulary characterized. Also, the in vitro release of salbutamol from carrier erythrocytes was studied over time interval. From the results it was found that, human erythrocytes have been successfully loaded with salbutamol using endocytosis method either at 25 Co or at 37 Co . The highest loaded amount was 3.5 mg/ml and 6.5 mg/ml respectively. Moreover, the percent of cells recovery is 90.7± 1.64%. Hematological parameters and osmotic fragility behavior of salbutamol loaded erythrocytes were similar that of native erythrocytes. Scanning electron microscopy demonstrated that the salbutamol loaded cells has moderate change in the morphology. Salbutamol releasing from carrier cell was 43% after 36 hours in phosphate buffer saline. The releasing pattern of the drug from loaded erythrocytes showed initial burst release in the first hour followed by a very slow release, obeying zero order kinetics. It concluded that salbutamol is successfully entrapped into erythrocytes with acceptable loading parameters and moderate morphological changes, this suggesting that erythrocytes can be used as prolonged release carrier for salbutamol.

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

Development, in vitro and in vivo Evaluations of Solid-Lipid Microparticles based on Solidified Micellar Carrier System for Oral Delivery of Cefepime

2017 ◽  
Vol 10 (1) ◽  
pp. 3582-3593
Author(s):  
Chukwuebuka Umeyor ◽  
Uchechukwu Nnadozie ◽  
Anthony Attama
Keyword(s):  
Oral Delivery ◽  
In Vitro Release ◽  
Carrier System ◽  
Solid Lipid ◽  
Solid Lipid Microparticles ◽  
Release Study ◽  
Lipid Microparticles ◽  
Vitro Release

This study seeks to formulate and evaluate a solid lipid nanoparticle-based, solidified micellar carrier system for oral delivery of cefepime. Cefepime has enjoyed a lot of therapeutic usage in the treatment of susceptible bacterial infections; however, its use is limited due to its administration as an injection only with poor patient compliance. Since oral drug administration encourage high patient compliance with resultant effect in improved therapy, cefepime was formulated as solid lipid microparticles for oral delivery using the concept of solidified micellar carrier system. The carrier system was evaluated based on particle yield, particle size and morphology, encapsulation efficiency (EE %), and thermal analysis using differential scanning calorimeter (DSC). Preliminary microbiological studies were done using gram positive and negative bacteria. In vitro release study was performed using biorelevant media, while in vivo release study was performed in white albino rats. The yield of solid lipid microparticles (SLM) ranged from 84.2 – 98.0 %. The SLM were spherical with size ranges of 3.8 ± 1.2 to 42.0 ± 1.4 µm. The EE % calculated ranged from 83.6 – 94.8 %. Thermal analysis showed that SLM was less crystalline with high potential for drug entrapment. Microbial studies showed that cefepime retained its broad spectrum anti-bacterial activity. In vitro release showed sustained release of cefepime from SLM, and in vivo release study showed high concentration of cefepime released in the plasma of study rats. The study showed that smart engineering of solidified micellar carrier system could be used to improve oral delivery of cefepime.

Biopharmaceutical and Preclinical Studies of Zaleplon as Semisolid Dispersions with Self-emulsifying Lipid Surfactants for Oral Delivery

1970 ◽  
Vol 9 (1) ◽  
pp. 3102-3111
Author(s):  
Narendar Dudhipala ◽  
Arjun Narala ◽  
Dinesh Suram ◽  
Karthik Yadav Janga
Keyword(s):  
Oral Delivery ◽  
Molecular State ◽  
In Vivo Studies ◽  
In Vitro Dissolution ◽  
Content Uniformity ◽  
Phase Solubility ◽  
Microscopic Studies ◽  
Pure Drug

The objective of this present study is to develop a semisolid dispersion (SSD) of zaleplon with the aid of self-emulsifying lipid based amphiphilic carriers (TPGS E or Gelucire 44/14) addressing the poor solubility of this drug. A linear relationship between the solubility of drug with respect to increase in the concentration of lipid surfactant in aqueous medium resulting in AL type phase diagram was observed from phase solubility studies. Fusion method was employed to obtain semisolid dispersions (SSD) of zaleplon which showed high content uniformity of drug. The absence of chemical interactions between the pure drug, excipients and formulations were conferred by Fourier transmission infrared spectroscopic examinations. The photographic images from polarized optical microscopic studies revealed the change in crystalline form of drug to amorphous or molecular state. The superior dissolution parameters of zaleplon from SSD over pure crystalline drug interpreted from in vitro dissolution studies envisage the ability of these lipid surfactants as solubility enhancers. Further, the caliber of TPGS E or Gelucire 44/14 in encouraging the GI absorption of drug was evident with the higher human effective permeability coefficient and fraction oral dose of drug absorbed from SSD in situ intestinal permeation study. In conclusion, in vivo studies in Wister rats demonstrated an improvement in the oral bioavailability of zaleplon from SSD over control pure drug suspension suggesting the competence of Gelucire 44/14 and TPGS E as conscientious carriers to augment the dissolution rate limited bioavailability of this active

Internal and External Triggering Mechanism of “Smart” Nanoparticle-Based DDSs in Targeted Tumor Therapy

2018 ◽  
Vol 24 (15) ◽  
pp. 1639-1651 ◽  
Author(s):  
Xian-ling Qian ◽  
Jun Li ◽  
Ran Wei ◽  
Hui Lin ◽  
Li-xia Xiong
Keyword(s):  
Targeted Delivery ◽  
Tumor Therapy ◽  
Burst Release ◽  
Tumor Site ◽  
Chemotherapeutic Drugs ◽  
Triggering Mechanism ◽  
Triggering Factors ◽  
Or Genes

Background: Anticancer chemotherapeutics have a lot of problems via conventional Drug Delivery Systems (DDSs), including non-specificity, burst release, severe side-effects, and damage to normal cells. Owing to its potential to circumventing these problems, nanotechnology has gained increasing attention in targeted tumor therapy. Chemotherapeutic drugs or genes encapsulated in nanoparticles could be used to target therapies to the tumor site in three ways: “passive”, “active”, and “smart” targeting. Objective: To summarize the mechanisms of various internal and external “smart” stimulating factors on the basis of findings from in vivo and in vitro studies. Method: A thorough search of PubMed was conducted in order to identify the majority of trials, studies and novel articles related to the subject. Results: Activated by internal triggering factors (pH, redox, enzyme, hypoxia, etc.) or external triggering factors (temperature, light of different wavelengths, ultrasound, magnetic fields, etc.), “smart” DDSs exhibit targeted delivery to the tumor site, and controlled release of chemotherapeutic drugs or genes. Conclusion: In this review article, we summarize and classify the internal and external triggering mechanism of “smart” nanoparticle-based DDSs in targeted tumor therapy, and the most recent research advances are illustrated for better understanding.

Sign in / Sign up

Export Citation Format

Share Document