Nasalance Scores as a Function of Skeletal Malocclusion of English-Speaking Adults in the North Indian Population

2021 ◽  
pp. 1-10
Author(s):  
Sanjeev Verma ◽  
Nameksh Raj Bhupali ◽  
Satinder Pal Singh ◽  
Dharam Vir ◽  
Chaman Lal
Keyword(s):  
Class Ii ◽  
Normative Values ◽  
Control Group ◽  
Class Iii ◽  
Skeletal Class ◽  
The North ◽  
Skeletal Malocclusion ◽  
Skeletal Class Ii ◽  
Group 3 ◽  
Group 1

<b><i>Objective:</i></b> The objective of this study is quantitative assessment of nasalance for skeletal Class I (normative values), Class II, and III malocclusion in the English language for the North Indian population and to compare the normative values with the nasalance scores obtained from individuals with skeletal Class II and III malocclusion and to evaluate the normative values as a function of gender. <b><i>Material and Methods:</i></b> The study was conducted on a total sample of 200 patients with 100, 50, and 50 in group 1 (control group, Skeletal Class I), group 2 (Skeletal Class II), and group 3 (Skeletal Class III), respectively. ANB angle (anteroposterior angle formed by point A, nasion, and point B) measured on lateral cephalogram was used to categorize the patients into 3 groups. The normative nasalance scores were compared for males and females in the control group. The nasalance scores of skeletal Class II and III subjects were compared to the combined normative scores of the control group. The NasalView was used for the objective assessment of nasalance. Oral syllables (/pa/and/pi/), nasal syllables (/ma/and/mi/), and 3 passages (Zoo passage, Rainbow passage, and Nasal sentences) were used to determine the nasalance scores. <b><i>Results:</i></b> The intragroup comparison of nasalance scores in group 1 showed statistically significant differences for different stimuli. The gender-related comparison showed no statistically significant differences in nasalance scores. The intergroup comparison of nasalance scores for skeletal malocclusion showed no statistically significant differences for different stimuli except statistically significant lower nasalance values for nasal sentences in group 3 compared to the control group. <b><i>Conclusion:</i></b> The study concluded that the nasalance scores for nasal sentences in skeletal Class III malocclusion were significantly lower than in the control group and were not statistically significant between the 3 groups for all other stimuli.

scholarly journals Craniofacial And Dentoalveolar Morphology In Individuals With Prader-Willi Syndrome: A Case-Control Study.

2021 ◽  
Author(s):  
Gisela Vasconcelos ◽  
Jo Stenehjem ◽  
Stefan Axelsson ◽  
Ronnaug Saeves
Keyword(s):  
Young Adults ◽  
Class Ii ◽  
Growth Direction ◽  
Control Group ◽  
Craniofacial Growth ◽  
Prader Willi Syndrome ◽  
Class Iii ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Lateral Cephalograms

Abstract Background: Prader-Willi syndrome (PWS) is a complex multisystem genetic disorder with distinct genetic and clinical features. Among other clinical symptoms, PWS is characterized by severe infantile hypotonia with feeding problems, childhood onset hyperphagia, obesity, scoliosis, short stature combined with growth hormone deficiency and developmental delay. PWS is associated with facial dysmorphology, orofacial dysfunction, oral abnormalities, low salivary flow and subsequent severe tooth wear. Little is known about the craniofacial growth direction or dental and skeletal relationships in individuals with PWS in different ages. The purpose of this study was to assess the craniofacial and dentoalveolar characteristics and to investigate the craniofacial growth direction separately in children, young adults and adults with PWS, using a cephalometric analysis of lateral cephalograms. Results: Lateral cephalograms of 42 individuals with a confirmed genetic diagnosis of PWS were analysed and divided into three groups according to their age: Children (< 12 years), young adults (12 – 20 years) and adults (> 20 years). Cephalometric variables were compared between PWS patients and healthy age- and sex-matched controls.Significant deviations and distinct craniofacial patterns were found in children, young adults and adults with PWS compared with the control group. Children showed retrognatic mandible with a skeletal class II relationship, posterior growth direction and longer anterior face height. The young adults had smaller cranial base angle, a skeletal class II pattern and a higher anterior lower face than the control group. Adults with PWS had a prognathic mandible, skeletal class III relationship with anterior growth direction, more retroclined lower incisors and proclined upper incisors than the controls. Similar results were found when comparing the three groups with PWS; the adults had a prognathic mandible, skeletal class III pattern and anterior growth direction. Children had a retropositioned mandibula, skeletal class II relationship and posterior growth direction. Conclusion: This study may contribute to a better understanding of the craniofacial growth pattern in children, young adults and adults with PWS and may have a clinical importance when planning dental treatment, such as prosthodontics and/or orthodontics.

scholarly journals Dental anomalies in orthodontic patients with and without skeletal discrepancies

2020 ◽  
Vol 8 (1) ◽  
Author(s):  
Clarissa Christina Avelar Fernandez ◽  
Mônica Gentil Mattos ◽  
Christiane Vasconcellos Cruz Alves Pereira ◽  
Marcelo De Castro Costa
Keyword(s):  
Observational Studies ◽  
Class Ii ◽  
Systematic Search ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Dental Anomalies ◽  
Skeletal Class ◽  
Skeletal Malocclusion ◽  
Skeletal Class Ii ◽  
Orthodontic Patients

Objective:To determine whether individuals withskeletal discrepancies of Class II or IIIdisplay a higher frequency of dental anomalies in comparison with individuals with Class I malocclusion. Design:A systematic search of the main electronic medical scientific literaturedatabases was conducted. Observational studies were selected if mentioning dental anomalies in the different skeletal malocclusion patterns.Results:A total of 4,768 studies were found and the duplicated studies (1,279) were removed, resulting in 3,489 papers to be analyzed. After screening by title, 138 were fit for screening by abstract. After that, a total of 13 papers were carefully read in full. Five studies included dental anomaly frequencies in orthodontic patients and included 7,679 participants. The frequency of dental anomalies ranged from 11.2% to 40.3%.It was observed that individuals with skeletal discrepancies of Class II and III had more dental anomalies when compared to individuals with Class I.Conclusion:Individuals with skeletal malocclusion patternshave more dental anomalies and there is an association between dental anomalies and skeletal Class II or Class III malocclusion patterns.

scholarly journals Pattern of Malocclusion in Orthodontic Patients in South-Eastern Region of Nepal

2017 ◽  
Vol 7 (1) ◽  
pp. 7-10 ◽  
Author(s):  
Anand Acharya ◽  
Bhushan Bhattarai ◽  
Diana George ◽  
Tarakant Bhagat
Keyword(s):  
Class Ii ◽  
Class I ◽  
Eastern Region ◽  
Class Iii ◽  
Skeletal Class ◽  
South Eastern ◽  
Skeletal Malocclusion ◽  
Skeletal Class Ii ◽  
Lateral Cephalograms ◽  
Orthodontic Patients

Introduction: Occlusal traits in orthodontic patients have been studied in different parts of Nepal. However, very few data are available on malocclusion in south-eastern region of Nepal.Objective: To assess the pattern of malocclusion occurring in orthodontic patients in south-eastern region of Nepal, and to estimate the age of presentation of Class II malocclusion among the patients.Materials & Method: Data were collected from 150 pre-treatment study models and lateral cephalograms from two orthodontic specialty clinics in Biratnagar. Angle’s classification system was used to determine dental malocclusion and ANB angle was used to determine skeletal malocclusion. Chi square test was used to test the association between dental and skeleton malocclusions.Result: Angle’s Class I malocclusion was found in 95(63.33%), Class II Div 1 in 41(27.33%), Class II Div 2 in 13(8.66%) and Class III in 1(0.66%). Among all subjects; 119 (79.33%) had skeletal Class I, 24(16%) had skeletal Class II and 7(4.66%) had skeletal Class III. There was significant association between dental and skeletal malocclusions. The average age for reporting Class II Div 1 malocclusion was 16.5 years and Class II Div 2 malocclusion was 19 years.Conclusion: Angle’s Class I is the most common malocclusion followed by Class II and Class III among orthodontic patients in south-eastern Nepal. The subjects lack awareness on age factor for orthodontic treatment. 

Genetic Polymorphisms in FGFR2 Underlie Skeletal Malocclusion

2019 ◽  
Vol 98 (12) ◽  
pp. 1340-1347 ◽  
Author(s):  
Q. Jiang ◽  
L. Mei ◽  
Y. Zou ◽  
Q. Ding ◽  
R.D. Cannon ◽  
...  
Keyword(s):  
Osteogenic Differentiation ◽  
Bone Growth ◽  
Class Ii ◽  
Class I ◽  
Class Iii ◽  
Mobility Shift ◽  
Skeletal Class ◽  
Skeletal Malocclusion ◽  
Skeletal Class Ii ◽  
The Common

Fibroblast growth factor receptor 2 ( FGFR2) in craniofacial bones mediates osteoprogenitor proliferation, differentiation, and apoptosis. The distortion of proper craniofacial bone growth may cause class II and class III skeletal malocclusion and result in compromised function and aesthetics. Here, we investigated the association between variations in FGFR2 and skeletal malocclusions. First, 895 subjects were included in a 2-stage case-control study with independent populations (stage 1: n = 138 class I, 111 class II, and 81 class III; stage 2: n = 279 class I, 187 class II, and 99 class III). Eight candidate single-nucleotide polymorphisms (SNPs) in FGFR2 were screened and validated. Five SNPs (rs2162540, rs2981578, rs1078806, rs11200014, and rs10736303) were found to be associated with skeletal malocclusions (all P < 0.05). That is, rs2162540 was significantly associated with skeletal class II malocclusion, while others were associated with skeletal class III malocclusion. Electrophoretic mobility shift assay and chromatin immunoprecipitation analysis showed that the common genotypes of rs2981578 and rs10736303 contained the binding sites of RUNX2 and SMAD4. Compared with the common genotypes, the minor genotypes at these 2 SNPs decreased the binding affinity and enhancer effect of RUNX2 and SMAD4, as well the levels of FGFR2 expression. In addition, FGFR2 expression contributed positively to osteogenic differentiation in vitro. Thus, we identified FGFR2 as a skeletal malocclusion risk gene, and FGFR2 polymorphisms regulated its transcriptional expression and then osteogenic differentiation.

scholarly journals Perbedaan ukuran sinus maksilaris pada maloklusi kelas I, II, dan III skeletal ditinjau dari radiografi sefalometriThe difference in the maxillary sinus size of skeletal class I, II, and III malocclusions in terms of cephalometric radiographs

2021 ◽  
Vol 33 (1) ◽  
pp. 53
Author(s):  
Brandon Thamran ◽  
Mimi Marina Lubis
Keyword(s):  
Maxillary Sinus ◽  
Class Ii ◽  
Class I ◽  
Class Iii ◽  
Skeletal Class ◽  
Skeletal Malocclusion ◽  
Skeletal Class Ii ◽  
Significant Difference ◽  
Males And Females ◽  
The Mean

Pendahuluan: Ukuran sinus maksilaris dapat dipengaruhi maloklusi skeletal, oleh karena itu pengetahuan dalam perkembangan dan ukuran sinus maksilaris penting dalam diagnosa dan menentukan rencana perawatan kasus maloklusi. Tujuan penelitian untuk menganalisis perbedaan rerata ukuran sinus maksilaris pada maloklusi kelas I, II, dan III skeletal pada laki-laki dan perempuan. Metode: Jenis penelitian Penelitian deskriptif analitik dilakukan pada 96 pasien RSGM USU usia 18-35 tahun dengan Teknik purposive sampling, terdiri dari 27 relasi rahang Kelas I, 31 Kelas II dan 22 Kelas III. Subjek  diperoleh melalui pengukuran metode Steiner. Hasil tracing dipindahkan melalui scanner dan  pengukuran luas Sinus Maksilaris dengan program AutoCAD. Hasil: Rerata sinus maksilaris Kelas I skeletal adalah 1492,18268,44 mm2  untuk laki-laki dan 1614,80259,13 mm2 untuk perempuan p=0,275, maka tidak ada perbedaan signifikan antara rerata sinus maksilaris Kelas I skeletal pada laki-laki dan perempuan, Kelas II skeletal adalah 1879,75 mm2 untuk laki-laki dan 1544,41239,47 mm2 untuk perempuan diperoleh p=0,016, maka terdapat perbedaan signifikan antara rerata  sinus maksilaris Kelas II skeletal pada laki-laki dan perempuan, dan Kelas III skeletal adalah 1619,36 mm2 untuk laki-laki dan 1489,92 mm2 untuk perempuan diperoleh p=0,239, maka tidak ada perbedaan signifikan antara rerata  sinus maksilaris  Kelas III skeletal pada laki-laki dan perempuan. Rerata ukuran antar kelompok didapatkan 1572,93 263,72 mm2  untuk Kelas I skeletal, 1609,32 mm2 untuk Kelas II skeletal, dan 1531,11 mm2 untuk Kelas III skeletal dengan p=0,600, Hasil ini menunjukkan tidak ada perbedaan rerata  sinus maksilaris pada maloklusi Kelas I, Kelas II dan Kelas III skeletal. Simpulan: Tidak ada perbedaan pada rerata ukuran sinus maksilaris pada maloklusi Kelas I, Kelas II dan Kelas III skeletal.Kata kunci: Ukuran sinus maksilaris, maloklusi skeletal, analisa Steiner, radiogram sefalometri. ABSTRACTIntroduction: Maxillary sinus size can be affected by skeletal malocclusion. Therefore knowledge of maxillary sinus development and size is essential in diagnosing and determining the treatment plan for malocclusion cases. This study was aimed to analyse the mean difference in maxillary sinus size in skeletal class I, II, and III malocclusions in males and females. Methods: This type of study was a descriptive-analytic study conducted on 96 patients at Universitas Sumatera Utara Dental Hospital aged 18-35 years with a purposive sampling technique, consisting of 27 Class I, 31 Class II and 22 Class III jaw relations. Subjects were obtained by measuring the Steiner method. The tracing results were transferred through a scanner and measuring the maxillary sinus area using the AutoCAD program. Results: The mean skeletal Class I maxillary sinus was 1492.18268.44 mm2 for men and 1614,80259.13 mm2 for women p = 0.275, so there was no significant difference between the mean skeletal Class I maxillary sinus in males and females. Class II skeletal is 1879.75 mm2 for men and 1544.41239.47 mm2 for women obtained p = 0.016. Hence, there is a significant difference between the mean skeletal Class II maxillary sinus in males and females, and skeletal Class III is 1619.36 mm2 for men and 1489.92 mm2 for women obtained p = 0.239, so there was no significant difference between the mean skeletal Class III maxillary sinus in males and females. The mean size between groups was 1572.93 263.72 mm2 for skeletal Class I, 1609.32 mm2 for skeletal Class II, and 1531.11 mm2 for skeletal Class III with p = 0.600. skeletal Class I, Class II and Class III malocclusions. Conclusion: There was no difference in mean maxillary sinus size in skeletal Class I, Class II and Class III malocclusions.Keywords: Maxillary sinus size, skeletal malocclusion, Steiner analysis, cephalometric radiograph.

scholarly journals Evaluation of Facial Esthetics using Golden Proportion Values in Dravidian Population for Different Classes of Malocclusions

2020 ◽  
Vol 11 (SPL4) ◽  
pp. 418-422
Author(s):  
Prasanna Arvind T R ◽  
Navaneethan Ramasamy ◽  
Sri Rengalakshmi
Keyword(s):  
Class Ii ◽  
Class I ◽  
Class Iii ◽  
Golden Proportion ◽  
Skeletal Class ◽  
Skeletal Malocclusion ◽  
Skeletal Class Ii ◽  
Facial Esthetics ◽  
Significant Difference ◽  
Facial Proportions

Improvement in esthetic appearance and functional occlusion are the pillars of contemporary orthodontic procedures. The aim of this study was to assess variations in facial proportions between skeletal classes I, II, III populations in order to establish objective departures from Golden Proportion norms. The study sample was divided into three groups based on the skeletal malocclusion, namely skeletal class I, class II and class III groups. Various markers were identified in these photographs in order to define facial symmetry and balance with the ideal values. Golden Proportion values were compared with that of the obtained results, and these values were checked for skeletal class I, II, III malocclusions. Our study showed a significant difference between skeletal class II and III malocclusions when correlated with Golden Proportion values. Skeletal Class I malocclusions showed a greater correlation with golden proportion values. Golden proportion ratios are more valid in cases of skeletal class I malocclusions. Hence, the objective of treating class II and class III malocclusions should be more focused on attaining values closer to the desired ratio for optimal facial balance and symmetry.

scholarly journals Current Trends in Orthognathic Surgery in Poland—A Retrospective Analysis of 124 Cases

2021 ◽  
Vol 11 (14) ◽  
pp. 6439
Author(s):  
Ewa Zawiślak ◽  
Szymon Przywitowski ◽  
Anna Olejnik ◽  
Hanna Gerber ◽  
Paweł Golusiński ◽  
...  
Keyword(s):  
Orthognathic Surgery ◽  
Corrective Osteotomy ◽  
University Hospital ◽  
Class Iii ◽  
Facial Skeleton ◽  
Skeletal Class ◽  
Skeletal Malocclusion ◽  
Current Trends ◽  
Maxillary Osteotomy ◽  
Skeletal Class Ii

The analysis aims at assessing the current trends in orthognathic surgery. The retrospective study covered a group of 124 patients with skeletal malocclusion treated by one team of maxillofacial surgeons at the University Hospital in Zielona Góra, Poland. Various variables were analysed, including demographic characteristics of the group, type of deformity, type of osteotomy used, order in which osteotomy was performed and duration of types of surgery. The mean age of the patients was 28 (ranging from 17 to 48, SD = 7). The group included a slightly bigger number of females (59.7%), with the dominant skeletal Class III (64.5%), and asymmetries were found in 21.8% of cases. Types of osteotomy performed during surgeries were divided as follows: LeFort I, segmental LeFort I, BSSO, BSSO with genioplasty, LeFort I with BSSO, LeFort I with BSSO and genioplasty, segmental LeFort I with BSSO, isolated genioplasty. Bimaxillary surgeries with and without genioplasty constituted the largest group of orthognathic surgeries (49.1%), and a slightly smaller percentage were one jaw surgeries (46.7%). A statistically significant correlation was found between the type of surgery and the skeletal class. In patients with skeletal Class III, bimaxillary surgeries were performed significantly more often than in patients with skeletal Class II (57.5% vs. 20.0%; p = 0.0002). The most common type of osteotomy in all surgeries was bilateral osteotomy of the mandible modo Obwegeser–Epker in combination with Le Fort I maxillary osteotomy (42.7%). The order of osteotomies in bimaxillary surgeries was mandible first in 61.3% of cases. The longest surgery was bimaxillary osteotomy with genioplasty (mean = 265 min), and the shortest surgery was isolated genioplasty (mean = 96 min). The results of the analysis show a significant differentiation between the needs of orthognathic surgery and the types of corrective osteotomy applied to the facial skeleton.

scholarly journals Anatomical characteristics of mandibular bone in skeletal Class I, II and III patients by using cone beam computed tomography images in an iranian population

2021 ◽  
Vol 24 (2) ◽  
Author(s):  
Mohammad Zandi ◽  
Abbas Shokri ◽  
Vahid Mollabashi ◽  
Zahed Eghdami ◽  
Payam Amini
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Class Ii ◽  
Class I ◽  
Cone Beam ◽  
Class Iii ◽  
Anatomical Characteristics ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Ramus Height

Objetive: This study aimed to compare the anatomical characteristics of the mandible in patients with skeletal class I, II and class III disorders using cone beam computed tomography (CBCT). Material and Methods: CBCT scans of patients between 17 to 40 years taken with NewTom 3G CBCT system with 12-inch field of view (FOV) were selected from the archive. Lateral cephalograms were obtained from CBCT scans of patients, and type of skeletal malocclusion was determined (Class I, II or III). All CBCT scans were evaluated in the sagittal, coronal and axial planes using the N.N.T viewer software. Results: The ramus height and distance from the mandibular foramen to the sigmoid notch in class II patients were significantly different from those in skeletal class I (P < 0.005). Distance from the mandibular canal to the anterior border of ramus in class III individuals was significantly different from that in skeletal class I individuals (P < .005). Conclusion: Length of the body of mandible in skeletal class I was significantly different from that in skeletal class II and III patients. Also, ramus height in skeletal class I was significantly different from that in skeletal class II patients. CBCT had high efficacy for accurate identification of anatomical landmarks.   Keywords Prognathism; Retrognathism; Mandible; Anatomy; Cone beam computed tomography.

scholarly journals Comparative Study on the Efficiency of Intermaxillary Elastic Polymers used in the Treatment of Skeletal Class II Malocclusions in Growing Patients

2019 ◽  
Vol 56 (2) ◽  
pp. 341-345 ◽  
Author(s):  
Luminita Ligia Vaida ◽  
Raluca Dima ◽  
Emilia Albinita Cuc ◽  
Bianca Maria Negrutiu ◽  
Abel Emanuel Moca ◽  
...  
Keyword(s):  
Class Ii ◽  
Class Ii Malocclusion ◽  
Therapeutic Approaches ◽  
Mandibular Growth ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Orthodontic Patients ◽  
Group 2 ◽  
Class Ii Elastics ◽  
Group 1

The aim of this study was to evaluate the efficiency in using intermaxillary elastics to stimulate mandibular growth and advancement in orthodontic patients diagnosed with skeletal Class II malocclusion as well as to compare the use of these Class II elastics in two different therapeutic approaches. The sample consisted of 60 orthodontic patients aged 10-15 years, 34 girls and 26 boys. The sample was divided into two equal groups (each consisting of 30 patients). Patients belonging to the first group (Group 1) were subjected to 1/4�� - 6.0 oz elastics and were advised to change the elastic every 24 hours. Patients belonging to the second group (Group 2) were subjected to 1/4�- 4.5 oz elastics but with a recommendation to change the elastics every 12 hours. In order to evaluate the effectiveness of these two types of Class II elastics on mandibular growth and advancement, the value of the SNB angle at the beginning of the treatment (T1) was compared with the value of the SNB angle after 5 months of wearing intermaxillary elastics (T2). All patients showed statistically significant increased values of the SNB angle during the orthodontic treatment (p[0.001). Patients in Group 2 showed a significantly higher statistical increase (p[0.05) than patients in Group 1.

scholarly journals Alveolar and symphysis regions of patients with skeletal class II division 1 anomalies with different vertical growth patterns

2012 ◽  
Vol 06 (02) ◽  
pp. 123-132 ◽  
Author(s):  
Elcin Esenlik ◽  
Fidan Alakus Sabuncuoglu
Keyword(s):  
Normal Subjects ◽  
Class Ii ◽  
Growth Patterns ◽  
Control Group ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Lateral Cephalograms ◽  
Division 1 ◽  
Main Factor ◽  
Class Ii Division 1

ABSTRACTObjectives: The aim of this study was to investigate the alveolar and symphysis region properties in hyper-, hypo-, and normodivergent Class II division 1 anomaliesMethods: Pretreatment lateral cephalograms of 111 young adult female patients with skeletal Class II division 1 anomalies were compared to those of 54 Class I normal subjects (control group). Class II cases were divided into hyperdivergent (n = 58), hypodivergent (n = 19), and normodivergent groups (n = 34). The heights and widths of the symphysis and alveolus and the depth of maxillary palate were measured on the lateral cephalogramsResults: Mean symphysis width was wider in the hypodivergent Class II group than in the other groups, while mean symphysis height was similar among all groups. Maxillary palatal depth, upper incisor angle, upper and lower molar alveolar heights, and Id–Id′ width were also similar among groupsConclusion: Symphysis width is the main factor in the differential diagnosis of Class II division 1 anomaly rather than symphysis height and hypodivergent Class II Division 1 anomaly is more suitable for mandibular incisors movements. (Eur J Dent 2012;6:123-132)

Sign in / Sign up

Export Citation Format

Share Document