New Technology for Peace & Protection: Expanding the r2p Toolbox

Daedalus ◽  
2016 ◽  
Vol 145 (4) ◽  
pp. 88-100 ◽  
Author(s):  
Lloyd Axworthy ◽  
A. Walter Dorn

New technological advances in areas such as digital information, algorithmic forensic data analysis, autonomous surveillance vehicles, advanced robotics, and multispectral sensors (sometimes all working together) can help avert war, introduce more effective peacekeeping and peacemaking initiatives, lessen the impact of conflict on innocent people, and help rebuild war-torn states. When international humanitarian action becomes urgent, by way of knowledge gained through such technologies, then those same peace applications can be used to reduce harmful forms of intervention and to ensure that enforcers are abiding by international law and UN guidance. An ethical failure occurs when such technologies exist to save lives, reduce risks, and secure peace, but are not employed.

2000 ◽  
Vol 13 (1) ◽  
pp. 15-21 ◽  
Author(s):  
Ruth-Ann Soodeen ◽  
Leslie L. Roos ◽  
Sandra Peterson

This study used Manitoba data from 1991 to 1996 to assess the effects of health reforms and technological advances on hospitalization patterns, patient mortality, and readmission rates. Cholecystectomy and hernia repair served as indicators of response to both new technology and health reforms, while appendectomy and hysterectomy helped gauge the impact of health reforms alone. Neither the introduction of new technology (i.e. laparoscopy) nor the health reform initiatives (i.e. shorter hospital stays) adversely affected surgical volumes, postsurgical mortality, or postsurgical readmissions.


2021 ◽  
Vol 10 (2) ◽  
pp. 333
Author(s):  
Waldimeiry Correa da Silva

Surrogacy or surrogate motherhood is a global phenomenon that has been on the rise since the 1980s. Academic research on surrogacy has adapted to the emerging challenges of this practice by becoming vast and highly multidisciplinary. To orient future research, we employ a bibliometric analysis to make a radiograph of past and current trends in the surrogacy literature. Our results indicate that (1) despite surrogacy being a global market, perspectives from economics and international law are being neglected; (2) research is not addressing the most concerning issues for policy, such as exploitation or human trafficking and the impact of technologies for the protection of the rights of the parties involved; and (3) surrogacy literature output is largely clustered in a handful of Western countries. Taken together, these results point to a huge gap between research and policy. Future research should address these neglected issues to better inform policy makers and the impact of technology on the law.


Author(s):  
Konrad Morgan ◽  
Madeleine Morgan

Since the inception of the Internet in the late 1960´s, technological advances in the field of Information Communications Technology (ICT) have created an ever-expanding digital arena for the development of human innovation, education, expression, communication and interaction. However, the creation and use of this vast network of knowledge, whether it is for educational, commercial, entertainment or creative purposes, has also produced its own set of ethical challenges. This paper discusses the ethical implications associated with the topics of veracity, identity and ownership and the impact of these fundamental ethical issues on human behaviour in emerging digital technologies.


2021 ◽  
Author(s):  
Creig Lamb

Emerging technologies, such as artificial intelligence and advanced robotics, have the potential to fundamentally change our work and daily lives. In recent years, the understanding of how these technological trends will impact employment has been at the forefront of many recent public debates. Each week there seem to be more and more articles being released about how “robots are taking our jobs.” For the most part, this rich discussion has been driven by the work of many prominent academics and researchers. Unsurprisingly, there are many competing viewpoints. Some argue that disruptive technology will be the driving force behind massive unemployment. Others posit that any potential job loss will likely be offset by productivity increases and employment growth. Despite the extensive literature, this discussion is largely taking place without the use of Canadian data. Although, we know that Canadians are not immune from the effects of automation, and that technological trends will likely have enormous implications for many Canadian industries. But the gap in Canadian-specific knowledge often means that we lack the tools to understand the impact of automation within our own borders. This limits our ability to begin to plan for potential disruption. We therefore felt that it would be useful to apply the findings from the existing literature to the Canadian workforce. To do so, we used methodologies both from both Oxford professors Carl Benedikt Frey and Michael A. Osborne and from management consulting firm McKinsey & Company, which have been employed in other jurisdictions, and applied them both to Canadian data for the first time. It is our goal to help Canadians better understand the effects that automation can have on our labour force. Overall we found that nearly 42 percent of the Canadian labour force is at a high risk of being affected by automation in the next decade or two. Individuals in these occupations earn less and are less educated than the rest of the Canadian labour force. While the literature suggests that these occupations may not necessarily be lost, we also discovered that major job restructuring will likely occur as a result of new technology. Using a different methodology, we found that nearly 42 percent of the tasks that Canadians are currently paid to do can be automated using existing technology. But the data does not paint an entirely negative picture. Using the Canadian Occupation Projection System (COPS), we found that the occupations with the lowest risk of being affected by automation are projected to produce nearly 712,000 net new jobs between 2014 and 2024. As with any type of forecasting exercise, there are always going to be uncertainties associated with the predictions. However, we do hope that this study provides a tool to help guide future decision-making.


2016 ◽  
Vol 1 (4) ◽  
pp. 150
Author(s):  
Veton Zejnullahi

The process of globalization, which many times is considered as new world order is affecting all spheres of modern society but also the media. In this paper specifically we will see the impact of globalization because we see changing the media access to global problems in general being listed on these processes. We will see that the greatest difficulties will have small media as such because the process is moving in the direction of creating mega media which thanks to new technology are reaching to deliver news and information at the time of their occurrence through choked the small media. So it is fair to conclude that the rapid economic development and especially the technology have made the world seem "too small" to the human eyes, because for real-time we will communicate with the world with the only one Internet connection, and also all the information are take for the development of events in the four corners of the world and direct from the places when the events happen. Even Albanian space has not left out of this process because the media in the Republic of Albania and the Republic of Kosovo are adapted to the new conditions under the influence of the globalization process. This fact is proven powerful through creating new television packages, written the websites and newspapers in their possession.


2019 ◽  
pp. 33-41
Author(s):  
V. L. Harutyunyan ◽  
S. V. Dokholyan ◽  
A. R. Makaryan

The presented study discusses the issues of applying the Common Customs Tariff (CCT) rates of the Eurasian Economic Union (EAEU) on rough diamonds and the impact thereof on the exports of stones cut and polished inArmeniaand then exported toRussia.Aim. The study aims to identify the possible strategies Armenian diamond cutting and polishing companies could adopt as a response to the application of the CCT rates on rough diamonds and how it would affect exports to various destinations, namely to Russia.Tasks. The authors analyze the current state of the gems and jewelry sector and substantiate the need to either integrate it into the jewelry manufacturing sector or to apply various strategies to facilitate exports to either Russia or other destinations in the medium term in response to the application of the CCT rates.Methods. This study uses general scientific methods of cognition, including analytical and methodological approaches and elements of forecasting. Possible strategies the Armenian diamond cutting and polishing companies could adopt in the medium term in response to the application of the EAEU CCT rates are determined using the analytical research method, forecasts in the context of the developments in the Armenian gem processing and jewelry market and global trends, statistical data on the imports and exports of cut and polished gems and jewelry for 2014–2018 published by the UN Comtrade Statistics.Results. Statistics on the exports of processed diamonds from 2014 to 2018 highlights the issue associated with the loss of competitiveness suffered by Armenian companies (mainly in comparison with Indian diamond cutters). The major global trends in the diamond cutting and polishing business indicate that it could be virtually impossible for Armenian cutters and polishers to compete with Indian companies in the medium term if they do not comes to investing in new technology to achieve operational efficiency. For these companies, it is important not to lose the Russian market due to an increase in the tariff rate and concentrate on the processing of gems that are larger than 1 carat. Another strategy to avoid an increase in the customs tariff rates would depend on the Armenian government’s ability to negotiate with Russia in respect of direct imports of diamond stones from Russian manufactures. Two other options for Armenian cutters involve focusing on cutting and polishing of rubies, sapphires, emeralds, etc. or integrating into the jewelry sector either by being the primary supplier or by considering this business as a channel to sell processed diamond stones by setting up their own jewelry manufacturing companies.Conclusions. With CCT going into effect in January 2021 and India’s dominant role in the diamond cutting and polishing business, Armenia needs to carefully consider all of the strategies the Armenian companies could adopt, as discussed above. As a member state of the EAEU, Armenia freely exports to Russia, however, further exports to Russia would depend on Armenia’s ability to ensure that cost-effective operations are in place, or to concentrate on the processing of precious gems rather than diamonds, or to switch to the manufacturing of jewelry items as a major export item.Practical Implication. The findings of this study could be of interest to the Ministry of Economy of the Republic of Armenia and Business Armenia that could be used in elaborating the strategy for the development of Armenian gems and jewelry sector of the economy.


Author(s):  
Eilionóir Flynn

Ireland’s constitution adopts a dualist approach to international law. It is in a unique position as a state which has not ratified the Convention on the Rights of Persons with Disabilities (CRPD), but one which is obliged to adhere to the provisions of the CRPD in EU law, by virtue of the EU’s conclusion of the CRPD in 2010. To date, the CRPD has been referenced in a number of cases before the Irish courts in the context of employment equality law and mental health law. This chapter examines the extent of the impact that the CRPD can have on the judgments of domestic courts on disability rights in advance of the state’s ratification of the Convention.


Author(s):  
Julio Baquero Cruz

This book discusses the impact of the difficult situation the European Union is currently going through on some structural elements of its legal order, looking for symptoms of decay, exploring examples of resistance, and assessing its overall state of health. The original choices made by the drafters of the Treaties and by the Court of Justice are put in their proper historical perspective, understanding Union law as a tool of civilization, and explaining its current problems, at least in part, as a consequence of the waning of the initial impetus behind integration. The concrete themes to be explored are the following: primacy, the national resistance to it and constitutional pluralism; the preliminary rulings procedure; Union citizenship, equality, and human dignity; the scope of the Charter and the standard of protection of fundamental rights; and the rigidity and fragmentation of the Union system in connection with the recent occasional use of international law as an alternative to Union law. The book looks at the development of the law throughout the decades, inevitably losing much detail, but hopefully also uncovering structural connections and continuities.


Sign in / Sign up

Export Citation Format

Share Document