scholarly journals Supply of Medicinal Raw Materials

2014 ◽  
Vol 9 (1-2) ◽  
pp. 206-235 ◽  
Author(s):  
Lucie Dejouhanet

The growth of the manufacturing sector in Ayurveda seems to be slowing down in the Indian state of Kerala as the prices of raw materials have increased inordinately, challenging the sustainability of ayurvedic drug production. Several reasons are responsible; in particular, the dwindling availability of plants, the excessive complexity of supply chains, the growing distances between plant sources and manufacturing units, and the control over the medicinal plant market by powerful middlemen. Substitution, adulteration, and quality control have become sensitive issues and may eventually damage the reputation of the ayurvedic drug sector in a context of high competition between manufacturers. Cultivating medicinal plants is considered to be the main solution for solving the supply crisis, but manufacturers’ demands are often too constraining for cultivators and this may not be such a viable alternative in a context of continuous modernisation efforts for production efficiency.

2017 ◽  
Vol 7 (1) ◽  
pp. 88-95
Author(s):  
Никифоров ◽  
Aleksandr Nikiforov ◽  
Никифорова ◽  
Antonina Nikiforova

Harvesting of medicinal-plant raw materials is one of the most promising areas for Russian producers, the market of which is characterized as developing one. Research on spatial analysis and definition of biological stock of medicinal-plant raw materials is made on the example of Lisinsky scientific-experimental forestry. The following medicinal plants: lily of the valley (Convallária majalis L.), St. John's wort (Hypéricum perforátum L.), valerian (Valeriána officinális L.), wood sorrel (Óxalis acetosella L.), Labrador tea (Ledum palustre L.), stinging nettle (Urtíca dióica L.) are widespread on the territory of the forestry and have potential commercial value. Data on stocks and territorial location of the medicinal plants were obtained with the use of geoinformation technologies. Biological stocks of medicinal raw materials is defined by the regional table for average long-term yield based on the types of growing conditions, forest types and taxonomic characteristics of plants. If we consider the maximum yield of one specific type of forest, we can say that Labrador tea and stinging nettle has the greatest mass. In the result, it was determined that harvesting of medicinal plants in the territory of forestry is possible for all the considered types of medicinal plants, which will increase the volumes of harvesting and storage of valuable raw materials. Inventory information and location of medicinal plants will enable to optimize the choice of the routes for the priority procurement of raw materials. Using GIS technology the total biological stock of the types of medicinal plants in Lisinsky scientific-experimental forestry was determined. Spatial analysis allowed determining the areas with the highest yield of medicinal plants. Geographic information systems can be used as a tool for monitoring, inventory, protection and organization of the industrial harvesting of medicinal raw materials. The developed technology can be used to determine the yield of mushrooms and wild berries.


2021 ◽  
Vol 10 (4) ◽  
pp. 32-36
Author(s):  
A. Yu. Turyshev ◽  
V. D. Belonogova ◽  
A. A. Orlova ◽  
K. O. Sidorov ◽  
A. Yu. Skornyakova

Introduction. Medicinal plant raw materials are one of the most important sources of herbal remedies used both for the prevention and treatment of a number of diseases [1, 2]. Even with the development of modern science and chemistry, medicinal plant raw materials are widely used in both folk and official medicine. The advantage of medicinal plants is their wide range of biological activity, low toxicity and the possibility of long-term use without significant side effects. Human economic activity has a noticeable negative effect on the condition of wild-growing plants: their stocks are decreasing, and some species disappear altogether. Today, given the high level of development of industry and agriculture, the procurement of raw materials for wild medicinal plants is not always possible. Information on the quantitative assessment of the raw material base of wild medicinal plants in the Middle Urals, the content of biologically active substances in medicinal plant raw materials is partially outdated, which determines the need for their systemic resource study and chemical-pharmacognostic study.Aim. Comprehensive assessment of the state of populations of wild medicinal plants in the Middle Urals.Materials and methods. Determination of stocks of raw materials of the studied species of medicinal plants was carried out on specific thickets according to the generally accepted method. The authenticity of the raw materials was established by a macroscopic method when collecting raw material samples. In the course of the study, samples of medicinal plant materials of 5 types were prepared. The determination and assessment of the main indicators of the good quality of medicinal plant raw materials (the content of active and extractive substances, moisture in the mass upon drying, total ash and ash insoluble in a 10% solution of hydrochloric acid) was carried out according to the methods and requirements of the State Pharmacopoeia of the Russian Federation XIV edition. In the raw materials Artemisiae absinthii herba and Leonuri herba, the amount of extractives was determined by the gravimetric method. The quantitative assessment of the content of essential oil in the samples of Origani vulgaris herba and Tanaceti vulgaris flores was carried out by the method of hydrodistillation. To determine the quantitative content of the sum of flavonoids in Hyperici herba, Artemisiae absinthii herba, Leonuri herba and the sum of flavonoids and phenolcarboxylic acids in Tanaceti vulgaris flores, a spectrophotometric method was used.Results and discussion. In the course of resource and phytochemical studies of representatives of the medicinal flora of the Middle Urals, a comprehensive assessment of the state of populations of wild medicinal plants – sources of medicinal plant raw materials (Origani vulgaris herba, Hyperici herba, Tanaceti vulgaris flores, Artemisiae absinthii herba and Leonuri herba) was carried out. The results are included in the electronic inventory of wild medicinal plants of the Middle Urals.Conclusion. The conducted complex of studies will allow updating information about the medicinal flora of the Middle Urals in order to use raw materials for the creation of medicines.


2020 ◽  
Vol 1 (337) ◽  
pp. 33-40
Author(s):  
Yedilova A.K. ◽  
Inelova Z.A.

The article provides an overview of the structural features of the natural populations of Humulus lupulus L. in the world and in Kazakhstan. Currently, the use in medicine of natural products, medicines and biologically active substances of plant origin is increasing. Significant parts of the medicinal raw materials are wild plants. The need for medicinal plant raw materials (medicinal plants) is not decreasing; the technology of its procurement and reproduction in natural conditions wants significant perfection. It is known that they have a milder, more complex effect on the human body and are used in the treatment of many chronic diseases. The growing anthropogenic impact on populations of valuable medicinal plants is decreasing their stocks of raw materials. In this regard, the study of biological characteristics and the development of scientifically based agricultural techniques for the cultivation of many medicinal plants are becoming relevant. Humulus lupulus L. (common hop) is a valuable medicinal plant. They are used as painkillers, sedatives, hypnotics for increased nervous irritability, sleep distur-bances, neuralgia, vegetovascular dystonia, mild coronary spasms, tachycardia, and in the early stages of hyper-tension. According to the classification of medicinal plant resources, Humulus lupulus L. is a plant with a wide range, but with a limited supply of raw materials. In places of growth of Humulus lupulus L. does not form large thickets [1]. Recently, a comprehensive approach has been applied in the study of natural plant populations, including ontomorphological and population-ecological studies. This makes it possible to objectively assess the state of the species in the cenosis and predict its future behavior. In this regard, a comprehensive study of the natural populations of Humulus lupulus L. is of great relevance. Hops (Humulus lupulus L.) is an important crop worldwide, known as the main flavor ingredient in beer. A diversified brewing industry requires a variety of flavors, superior technological properties and sustainable agro-nomy, which are the center of advanced molecular breeding efforts in hops. Hop breeders have been limited in their ability to create strains with desirable traits, however, due to unusual and unpredictable inheritance patterns and the associated non-Mendelian segregation of genetic markers [2]. The use of hops has recently been undergoing a new change, driven by a growing international preference for more intensely flavored beer, supported by the craft-brewing sector. This movement led to the introduction of much more hops at various stages of beer production and to an ever-growing search for new flavors. Some hop varieties have thus received particular attention, including several older typical hops mostly used to date, although an intensive search for new varieties dubbed "Green Gold" has also taken place. A large number of new exquisite varieties have been described and are increasingly appreciated in the market. Global hop growing areas have increased over the past 5 years, although total world beer production has declined over the same period, confirming the trend of using more hops per liter of beer. In addition, a wide range of pharmacological properties have been described for hops and its derivatives, namely antioxidant, anti-inflammatory and antitumor properties, which are of great importance for the pharmaceutical industry. The bioactivity of beer can depend on the use of hops, which can become an important tool for brewers aiming to develop functional products. Taken together, the compounds isolated from Humulus lupulus L. have a wide range of biological activity, such as anti-inflammatory action, antimicrobial action, antioxidant action, antiproliferative effects, cytochrome P450 effects, glucose metabolism effects, hormonal effects, lipid effects and sedative / hypnotic effects. Therefore, the purpose of this Chapter is to describe the importance of hops in this new direction of beer production, market overview of hops, varieties, forms and methods of use, composition, value in bioactivity of beer and new discoveries in research hops [3].


Foods ◽  
2020 ◽  
Vol 9 (5) ◽  
pp. 645 ◽  
Author(s):  
Mirjana Lončar ◽  
Martina Jakovljević ◽  
Drago Šubarić ◽  
Martina Pavlić ◽  
Vlatka Buzjak Služek ◽  
...  

Coumarin is a natural product with aromatic and fragrant characteristics, widespread in the entire plant kingdom. It is found in different plant sources such as vegetables, spices, fruits, and medicinal plants including all parts of the plants—fruits, roots, stems and leaves. Coumarin is found in high concentrations in certain types of cinnamon, which is one of the most frequent sources for human exposure to this substance. However, human exposure to coumarin has not been strictly determined, since there are no systematic measurements of consumption of cinnamon-containing foods. The addition of pure coumarin to foods is not allowed, since large amounts of coumarin can be hepatotoxic. However, according to the new European aroma law, coumarin may be present in foods only naturally or as a flavoring obtained from natural raw materials (as is the case with cinnamon). In this paper, the overview of the current European regulations on coumarin levels in food is presented, along with the most common coumarin food sources, with a special emphasis on cinnamon-containing food. Human exposure to coumarins in food is also reviewed, as well as the methods for determination and separation of coumarin and its derivatives in food.


2021 ◽  
Vol 37 (4) ◽  
pp. 200-207
Author(s):  
Pushan Chakraborty ◽  
Poulami Adhikary Mukherjee ◽  
Supratim Laha ◽  
Salil Kumar Gupta

Abstract Understanding the pollination biology of medicinal plants and their important insect pollinators is necessary for their conservation. The present study explored the complex interactions between pollinator visitation and effect of floral traits on pollinator behaviour on seven medicinal plant species grown in an urban garden in West Bengal, an eastern Indian state. The observations revealed 30 morphospecies of insect flower visitors (Diptera, Lepidoptera and Hymenoptera) that touched floral reproductive parts on the selected plants during visitation. Additionally, it was observed that floral traits (e.g., corolla length and corolla opening diameter) were important predictors of the behaviour of insects when visiting the flowers. Plant–pollinator interactions were analysed using a bipartite network approach which explored the important links between insect and plants in the network revealing the key interactions, and species which are crucial to system maintenance. This piece of work contributes to our ability to understand and maintain a stable medicinal plant–pollinator network which will support efforts to conserve native flora and insects.


2014 ◽  
Vol 1060 ◽  
pp. 219-222
Author(s):  
Suang Rungpragayphan ◽  
Perayot Pamonsinlapatham ◽  
Busaba Powthongchin ◽  
Wikanda Prommanee ◽  
Piyaporn Wongakson

DNA barcode is referred to specific ranges, sequences or fragments of DNA used for identification organisms at genus or species levels. There are several plant DNA barcodes which are currently studied, such as ITS (Internal Transcribed Spacer), ITS2 (Internal Transcribed Spacer 2), matK, psbA-trnH, rbcL, trnL-trnF. In this work, ITS, ITS2 and psbA-trnH sequences of many medicinal plants in the “Thai Medicinal Plant DNA Barcode Database” were studied. Total of 163 DNA barcodes from 75 plant families were processed and analysed. ATCG contents, %GC or %CG found, ATG patterns, and alignment patterns were investigated. Also, sequences relationships among families were discussed. This information will be useful for authentication and quality control of herbal medicine.


2012 ◽  
Vol 610-613 ◽  
pp. 3319-3322
Author(s):  
Guo Sheng Chen

due to the disordering and robbing exploration, the development of natural medicinal plant resources is facing severe habitat and social environment pressure that may touch the law in the process of getting raw materials from plants. Based on the above problems, to develop and enhance the distribution census about the new medicinal plant resources is a good way to cope with the resource shortages. In addition, for the validated medicinal plants, the scaled and standardized production is also an effective mean. Moreover, we should also have the whole dynamic management about the standardized production. That is to say, we should choose the excellent genetic resources, consider the regional characteristics, complete the gardens environment evaluation, grasp the best harvest time and strengthen the detection of the pesticide residues and heavy metal.


Author(s):  
Alexander D. Solovyev ◽  
◽  
Marina G. Shcherban ◽  
Maria D. Plotnikova ◽  
◽  
...  

According to the estimates of the World Health Organization, the share of medications based on medicinal plant materials is increasing from year to year. Along with industrial drugs, the population widely uses medicinal plants harvested on their own. However, medicinal plants growing in unfavorable environmental conditions can cause serious harm to health. Thus, it is necessary not only to control raw materials but also to study the areas where harvested medicinal plants grow, which in most cases are located in the immediate vicinity of industrial facilities. The purpose of this work was a comprehensive study of the ecological state of Zakurye Island in the town of Chusovoy and its plant communities. When planning the research work, the study area was zoned in accordance with the distance from the alleged source of pollution. In the process of work, we used standard methods of preparation and drying of medicinal plant materials, sampling of soil and water. Chemical analysis was carried out with the use of generally accepted and approved methods. A conclusion is made about a significant degree of pollution with pollutant metals of the surface and deep layers of the Chusovaya River, as well as of soil and medicinal plants near Zakurye Island. Most likely, environmental pollution is associated with poorly maintained dumps of blast-furnace slag from the Chusovoy Metallurgical Plant, located along the river bank.


2016 ◽  
Vol 8 (3) ◽  
pp. 300 ◽  
Author(s):  
Anupam Kumar Sachan ◽  
Garima Vishnoi ◽  
Roopak Kumar

<p>The medicinal plants are important source for pharmaceutical manufacturing. Medicinal plants &amp; herbal medicines account for a significant percentage of the pharmaceutical market. As the side effects of Synthetic medicine have started getting more apparent, majority of formulation are prepared from herbs. The herbal medicines however, suffer from lack of standardization parameters. The main limitation is the lack of standardization of raw materials, of processing methods and of the final products, dosage formulation, and the non existence of criteria for quality control. It is necessary to introduce measures on the regulation of herbal medicines to ensure quality, safety, efficacy of herbal medicines by using modern techniques, applying suitable standards &amp; GMP.</p>


2016 ◽  
pp. 29-39
Author(s):  
O. Ustymenko ◽  
L. Hlushchenko ◽  
N. Kutsenko

The article describes history of the organization of Ukraine’s first research station of medicinal plant cultivation. The main achievements of the scientific work Lubny research station of medicinal plants will be presented for 1916–2016. The main stages of medicinal plant cultivation as the field of agricultural production are given. An assessment of the role of scientific research stations of medicinal plants in the formation and development of the industry is carried out. During the time of work DSLR conducted introduction study and cultivation and developed agricultural techniques for over 120 species of medicinal plants, created 52 varieties of important crops such as mint, poppy, chamomile, valerian, echinacea, sage, skullcap and many others; designed a number of machines and devices for growing, harvesting and post-harvest handling of raw materials and seeds of many important medicinal plants that are successfully introduced into production. The paper highlights some questions about the prospects for implementing research in medicinal plant cultivation, intensification of the industry, increasing its relevance and effectiveness.


Sign in / Sign up

Export Citation Format

Share Document