Catalytic Performance of Supported Bimetallic Catalysts for Complete Oxidation of Toluene

2021 ◽  
Vol 21 (7) ◽  
pp. 4060-4066
Author(s):  
Sang-Chul Jung ◽  
Young-Kwon Park ◽  
Ho-Young Jung ◽  
Sang Chai Kim
Keyword(s):  
Catalytic Activity ◽  
Transition Metal ◽  
Bimetallic Catalysts ◽  
Xrd Analysis ◽  
Catalytic Performance ◽  
Bet Surface Area ◽  
Complete Oxidation ◽  
Transmission Electron ◽  
The Difference ◽  
Temperature Programmed

The complete oxidation of toluene (as a model volatile organic compound) was studied to determine the influence of adding a transition metal (Mn, Cr, Fe, Co, and Ni) to the 5 Cu/Al catalyst. The physcochemical properties of the catalysts were characterized by Brunauer–Emmett–Teller (BET) surface area analysis, X-ray diffraction (XRD) analysis, field emission transmission electron microscopy (FE/TEM), and hydrogen temperature programmed reduction (H2-TPR). The catalytic activity of the supported bimetallic catalysts followed the order: 5Cu-5Mn/Al > 5Cu-5Cr/Al > 5Cu-5Fe/Al > 5Cu-5Co/Al > 5Cu > 5Cu-5Ni/Al, based on the temperature for T90 of toluene conversion (T90). Two different reaction mechanisms (mixing and the synergistic effect) were operative in the supported bimetallic catalysts except for the 5Cu–5Mn/Al and 5Cu–5Ni/Al catalysts, on the basis of the reaction temperature. The difference between the electronegativity of copper and the added transition metal was associated with the catalytic activity.

scholarly journals Effects of Cobalt Loading, Particle Size, and Calcination Condition on Co/CNT Catalyst Performance in Fischer–Tropsch Reactions

Symmetry ◽  
2018 ◽  
Vol 11 (1) ◽  
pp. 7 ◽  
Author(s):  
Omid Akbarzadeh ◽  
Noor Mohd Zabidi ◽  
Yasmin Abdul Wahab ◽  
Nor Hamizi ◽  
Zaira Chowdhury ◽  
...  
Keyword(s):  
Particle Size ◽  
Fixed Bed ◽  
Xrd Analysis ◽  
Bet Surface Area ◽  
Fischer Tropsch ◽  
Strong Electrostatic Adsorption ◽  
Transmission Electron ◽  
Co Conversion ◽  
Cobalt Loading ◽  
Temperature Programmed

The strong electrostatic adsorption (SEA) method was applied to the synthesis of a cobalt (Co) catalyst on a multi-walled carbon nanotube (CNT) support. In order to uptake more of the cobalt cluster with higher dispersion, the CNT was functionalized via acid and thermal treatment. The Co/CNT catalyst samples were characterized by a range of methods including the Brunauer–Emmet–Teller (BET) surface area analyzer, transmission electron microscopy (TEM), X-ray powder diffraction (XRD) analysis, atomic absorption spectroscopy (AAS), and H2-temperature programmed reduction (H2-TPR) analysis. The data from the TEM images revealed that the catalyst was highly dispersed over the external and internal walls of the CNT and that it demonstrated a narrow particle size of 6–8 nm. In addition, the data from the H2-TPR studies showed a lower reduction temperature (420 °C) for the pre-treated catalyst samples. Furthermore, a Fischer–Tropsch synthesis (FTS) reaction was chosen to evaluate the Co/CNT catalyst performance by using a fixed-bed microreactor at different parameters. Finally finding the optimum value of the cobalt loading percentage, particle size, and calcination conditions of Co/CNT catalyst resulted in a CO conversion and C5+ selectivity of 58.7% and 83.2%, respectively.

scholarly journals Synthesis and Catalytic Performance of Ni/SiO2for Hydrogenation of 2-Methylfuran to 2-Methyltetrahydrofuran

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Fu Ding ◽  
Yajing Zhang ◽  
Guijin Yuan ◽  
Kangjun Wang ◽  
Ileana Dragutan ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Catalytic Performance ◽  
Bet Surface Area ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ni Content ◽  
Transmission Electron ◽  
Temperature Programmed ◽  
Ni Species

A series of Ni/SiO2catalysts with different Ni content were prepared by sol-gel method for application in the synthesis of 2-methyltetrahydrofuran (2-MTHF) by hydrogenation of 2-methylfuran (2-MF). The catalyst structure was investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and temperature programmed reduction (TPR). It is found that structures and catalytic performance of the catalysts were highly affected by the Ni content. The catalyst with a 25% Ni content had an appropriate size of the Ni species and larger BET surface area and produced a higher 2-MF conversion with enhanced selectivity in 2-MTHF.

scholarly journals A diffusion anisotropy descriptor links morphology effects of H-ZSM-5 zeolites to their catalytic cracking performance

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Xiaoliang Liu ◽  
Jing Shi ◽  
Guang Yang ◽  
Jian Zhou ◽  
Chuanming Wang ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Catalytic Cracking ◽  
Catalytic Performance ◽  
Zeolite Catalysts ◽  
Time Resolved ◽  
Cracking Performance ◽  
Morphology Effect ◽  
Ft Ir ◽  
The Difference ◽  
Dynamics Simulations

AbstractZeolite morphology is crucial in determining their catalytic activity, selectivity and stability, but quantitative descriptors of such a morphology effect are challenging to define. Here we introduce a descriptor that accounts for the morphology effect in the catalytic performances of H-ZSM-5 zeolite for C4 olefin catalytic cracking. A series of H-ZSM-5 zeolites with similar sheet-like morphology but different c-axis lengths were synthesized. We found that the catalytic activity and stability is improved in samples with longer c-axis. Combining time-resolved in-situ FT-IR spectroscopy with molecular dynamics simulations, we show that the difference in catalytic performance can be attributed to the anisotropy of the intracrystalline diffusive propensity of the olefins in different channels. Our descriptor offers mechanistic insight for the design of highly effective zeolite catalysts for olefin cracking.

The Effect of Ni Precursor Salts on Diatomite Supported Ni-Mg Catalysts in Methanation of CO2

2021 ◽  
Vol 1016 ◽  
pp. 1417-1422
Author(s):  
Chao Sun ◽  
Jugoslav Krstic ◽  
Vojkan Radonjic ◽  
Miroslav Stankovic ◽  
Patrick da Costa
Keyword(s):  
Catalytic Activity ◽  
Atmospheric Pressure ◽  
Textural Properties ◽  
Catalytic Performance ◽  
Nickel Salt ◽  
Nitrate Salt ◽  
Efficient Catalyst ◽  
Mild Conditions ◽  
The Difference ◽  
Supported Ni

This study is aimed to investigate the effect of Ni precursor salts on the properties (textural, phase-structural, reducibility, and basicity), and catalytic performance of diatomite supported Ni-Mg catalyst in methanation of CO2. The NiMg/D-X catalysts derived from various nickel salts (X = S-sulfamate, N-nitrate or A-acetate) were synthesized by the precipitation-deposition (PD) method. The catalysts were characterized by N2-physisorption, XRD, TPR-H2, and TPD-CO2 techniques. The different catalytic activity (conversion) and selectivity, observed in CO2 methanation carried out under relatively mild conditions (atmospheric pressure; temperatures: 250-450 °C) are related and explained by the difference in textural properties, metallic Ni-crystallite size, reducibility, and basicity of studied catalysts. The results showed that catalyst derived from Ni-nitrate salt (NiMg/D-N) is more suitable for the preparation of efficient catalyst for CO2 methanation than its counterparts derived from sulfamate (NiMg/D-S) or acetate (NiMg/D-A) nickel salt. The NiMg/D-N catalyst showed the highest specific surface area and total basicity, and the best catalytic performance with CO2 conversion of 63.3 % and CH4 selectivity of 80.9 % at 450 °C.

scholarly journals Preparation and Characterization of Rh/MgSNTs Catalyst for Hydroformylation of Vinyl Acetate: The Rh0 was Obtained by Calcination

Catalysts ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 215 ◽  
Author(s):  
Penghe Su ◽  
Ya Chen ◽  
Xiaotong Liu ◽  
Hongyuan Chuai ◽  
Hongchi Liu ◽  
...  
Keyword(s):  
Vinyl Acetate ◽  
Atomic Emission ◽  
Catalytic Performance ◽  
Bet Surface Area ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Atomic Emission Spectrometer ◽  
Calcination Method

A simple and practical Rh-catalyzed hydroformylation of vinyl acetate has been synthesized via impregnation-calcination method using silicate nanotubes (MgSNTs) as the supporter. The Rh0 (zero valent state of rhodium) was obtained by calcination. The influence of calcination temperature on catalytic performance of the catalysts was investigated in detail. The catalysts were characterized in detail by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectrometer (XPS), atomic emission spectrometer (ICP), and Brunauer–Emmett–Teller (BET) surface-area analyzers. The Rh/MgSNTs(a2) catalyst shows excellent catalytic activity, selectivity and superior cyclicity. The catalyst could be easily recovered by phase separation and was used up to four times.

Performance of Transition Metal Ions Exchanged Zeolite 13X in Greenhouse Gas Reduction

2007 ◽  
Author(s):  
K. S. Hui ◽  
Christopher Y. H. Chao ◽  
C. W. Kwong ◽  
M. P. Wan
Keyword(s):  
Activation Energy ◽  
Catalytic Activity ◽  
Transition Metal ◽  
Apparent Activation Energy ◽  
Surface Area ◽  
Active Sites ◽  
Methane Combustion ◽  
Bet Surface Area ◽  
Metal Loading ◽  
Zeolite 13X

This study investigated the performance of multi-transition metal (Cu, Cr, Ni and Co) ions exchanged zeolite 13X catalysts on methane emission abatement, especially at methane level of the exhaust from natural gas fueled vehicles. Catalytic activity of methane combustion using multi-ions exchanged catalyst was studied under different parameters: mole % of metal loading, inlet velocity and inlet methane concentration at atmospheric pressure and 500 °C. Performance of the catalysts was investigated and explained in terms of the apparent activation energy, number of active sites and BET surface area of the catalyst. This study showed that the multi-ions exchanged catalyst outperformed the single-ions exchanged and the acidified 13X catalysts. Lengthening the residence time could also lead to higher methane conversion %. Catalytic activity of the catalysts was influenced by the mole % of metal loading which played important roles in affecting the apparent activation energy of methane combustion, active sites and also the BET surface area of the catalyst. Increasing mole % of metal loading in the catalyst decreased the apparent activation energy for methane combustion and also the BET surface area of the catalyst. In view of these, there existed an optimized mole % of metal loading where the highest catalytic activity was observed.

Oxygen Radicals Occlusion/Release Behavior of Nanoporous Aluminosilicate, Ca12Al14-XSiXO33+0.5X (0≦X≦4)

2006 ◽  
Vol 45 ◽  
pp. 2105-2109
Author(s):  
Makoto Nagashima ◽  
Daisuke Hirabayashi ◽  
Kenzi Suzuki
Keyword(s):  
Catalytic Activity ◽  
Oxygen Content ◽  
Oxygen Radicals ◽  
Catalytic Performance ◽  
Oxygen Release ◽  
Release Behavior ◽  
Temperature Programmed Reduction ◽  
Temperature Programmed Oxidation ◽  
Temperature Range ◽  
Temperature Programmed

Oxygen radicals occlusion / release behavior of nanoporous aluminosilicate, Ca12Al14-XSiXO33+0.5X (0≦X≦4), synthesized under different condition was examined by the temperature programmed reduction (TPR) in an atmosphere of hydrogen in the temperature range of 200-1000°C and temperature programmed oxidation (TPO) measurement at 800°C. From the TPR results of Ca12Al14O33 (X=0) and Ca12Al10Si4O35 (X=4), it was found that there were three oxygen release peaks, denoted as α, β and γ, on each sample and the peaks appeared in the temperature range 300-420°C, 420-600°C, and 600-750°C, respectively. The oxygen contents of α and γ of samples were almost the same. However, the oxygen content of β in the sample with x = 4 was much larger, almost double, compared to that in x = 0. From the TPR, TPO results and catalytic performance, it was concluded that the oxygen content of β peak strongly influenced the catalytic activity of the nanoporous aluminosilicate in the propylene combustion.

scholarly journals Catalytic performance of Ag, Au and Ag-Au nanoparticles synthesized by lichen extract

2018 ◽  
Vol 7 (5) ◽  
pp. 433-440 ◽  
Author(s):  
Zafer Çıplak ◽  
Ceren Gökalp ◽  
Bengü Getiren ◽  
Atila Yıldız ◽  
Nuray Yıldız
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fourier Transform ◽  
Catalytic Activity ◽  
Au Nanoparticles ◽  
Bimetallic Nanoparticles ◽  
Catalytic Performance ◽  
Catalytic Activities ◽  
Transmission Electron ◽  
Vis Spectroscopy

Abstract In the present study, the green chemistry approach for the biosynthesis of Ag, Au and Ag-Au bimetallic nanoparticles (NPs) was applied using lichen extract [Cetraria islandica (L.) Ach.]. The lichen extract acts both as a reducing and stabilizing agent. The monometallic and bimetallic NPs were characterized by transmission electron microscopy (TEM), ultraviolet-visible (UV-Vis) spectroscopy and Fourier transform infrared (FTIR) spectroscopy. The results showed that NPs were successfully synthesized and the prepared structures were generally spherical. The synthesized nanostructures exhibited excellent catalytic activities towards reduction of nitrophenols (4-nitrophenol; 4-NP) to aminophenols (4-aminophenol; 4-AP) with sodium borohydride (NaBH4). It was determined that bimetallic NPs exhibit more effective catalytic activity than monometallic Ag and Au nanostructures. This is the first report on 4-NP reduction with Ag, Au and Au-Ag NP catalysts prepared by lichen extract.

scholarly journals PHOTOCATALYTIC DEGRADATION OF RHODAMINE B USING Ag NANO DOPED TiO2 PREPARED BY -IRRADIATION METHOD

2016 ◽  
Vol 54 (4) ◽  
pp. 494
Author(s):  
Vo Thi Thu Nhu ◽  
Nguyen Ngoc Duy ◽  
Huynh Nguyen Anh Tuan ◽  
Nguyen Pham Tu Ngan ◽  
Do Quang Minh ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Visible Light ◽  
Rhodamine B ◽  
Bet Surface Area ◽  
Nano Tio2 ◽  
Photo Catalyst ◽  
Photo Catalytic Activity ◽  
Transmission Electron ◽  
Degussa P25 ◽  
Area X

Ag nano deposited on TiO2 (Degussa P25) (Ag nano/TiO2) photo-catalyst has been synthesized by g-irradiation method. The  characteristics  of  Ag nano/TiO2 material  has  been  investigated  by BET surface area, X-ray diffraction (XRD), transmission electron microscopy (TEM) and the diffuse reflectance spectra (DRS). The photo-catalytic properties of Ag nano/TiO2 for degradation of Rhodamine B in aqueous solution under visible light have been studied. Results indicated that Ag nano/TiO2 photo-catalyst exhibited better photo-catalytic activity compared to that of TiO2 under the same reaction condition. The higher activity of Ag nano/TiO2 is due the enhancement of electron–hole separation effect on the surface of the catalyst. At 1.5% Ag doping content, the Ag nano/ TiO2 photo-catalyst exhibited the highest photo-catalytic activity under visible light.

The Different Morphology of Co3O4 Catalysts and Application in the Abatement of Carbon Monoxide

2021 ◽  
Vol 21 (12) ◽  
pp. 6082-6087
Author(s):  
Chih-Wei Tang ◽  
Hsiang-Yu Shih ◽  
Ruei-Ci Wu ◽  
Chih-Chia Wang ◽  
Chen-Bin Wang
Keyword(s):  
Carbon Monoxide ◽  
Catalytic Activity ◽  
Co Oxidation ◽  
Nitrogen Adsorption ◽  
Catalytic Performance ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Temperature Programmed ◽  
Adsorption Desorption

The increase of harmful carbon monoxide (CO) caused by incomplete combustion can affect human health even lead to suffocation. Therefore reducing the CO discharged by vehicles or factories is urgent to improve the air quality. The spinel cobalt (II, III) oxide (Co3O4) is an active catalyst for CO abatement. In this study, we tried to fabricate dispersing Co3O4 via the dispersion-precipitation method with acetic acid, formic acid, and oxalic acid as the chelating dispersants. Then, the asprepared samples were calcined at 300 ºC for 4 h to obtain active catalysts, and assigned as Co(A), Co(F) and Co(O) respectively, the amount of the dispersants used are labeled as I (0.12 mole), II (0.03 mole) and III (0.01 mole). For comparison, another CoAP sample was prepared via alkaliinduced precipitation and calcined at 300 ºC. All samples were characterized by X-ray diffraction (XRD), temperature-programmed reduction (TPR), scanning electron microscope (SEM), and nitrogen adsorption/desorption system, and the catalytic activity focused on the CO oxidation. The influence of chelating dispersant on the performance of abatement of CO was pursued in this study. Apparently, the results showed that the chelating dispersant can influence the catalytic activity of CO abatement. An optimized ratio of dispersant can improve the performance, while excess dispersant lessens the surface area and catalytic performance. The series of Co(O) samples can easily donate the active oxygen since the labile Co–O bonding and indicated the preferential performance than both Co(A) and Co(F) samples. The nanorod Co(O)-II showed preferential for CO oxidation, T50 and T90 approached 96 and 127 ºC, respectively. Also, the favorable durability of Co(O)-II sample maintains 95% conversion still for 50 h at 130 ºC and does not emerge deactivation.

Sign in / Sign up

Export Citation Format

Share Document