The Effect of Ni Precursor Salts on Diatomite Supported Ni-Mg Catalysts in Methanation of CO2

2021 ◽  
Vol 1016 ◽  
pp. 1417-1422
Author(s):  
Chao Sun ◽  
Jugoslav Krstic ◽  
Vojkan Radonjic ◽  
Miroslav Stankovic ◽  
Patrick da Costa
Keyword(s):  
Catalytic Activity ◽  
Atmospheric Pressure ◽  
Textural Properties ◽  
Catalytic Performance ◽  
Nickel Salt ◽  
Nitrate Salt ◽  
Efficient Catalyst ◽  
Mild Conditions ◽  
The Difference ◽  
Supported Ni

This study is aimed to investigate the effect of Ni precursor salts on the properties (textural, phase-structural, reducibility, and basicity), and catalytic performance of diatomite supported Ni-Mg catalyst in methanation of CO2. The NiMg/D-X catalysts derived from various nickel salts (X = S-sulfamate, N-nitrate or A-acetate) were synthesized by the precipitation-deposition (PD) method. The catalysts were characterized by N2-physisorption, XRD, TPR-H2, and TPD-CO2 techniques. The different catalytic activity (conversion) and selectivity, observed in CO2 methanation carried out under relatively mild conditions (atmospheric pressure; temperatures: 250-450 °C) are related and explained by the difference in textural properties, metallic Ni-crystallite size, reducibility, and basicity of studied catalysts. The results showed that catalyst derived from Ni-nitrate salt (NiMg/D-N) is more suitable for the preparation of efficient catalyst for CO2 methanation than its counterparts derived from sulfamate (NiMg/D-S) or acetate (NiMg/D-A) nickel salt. The NiMg/D-N catalyst showed the highest specific surface area and total basicity, and the best catalytic performance with CO2 conversion of 63.3 % and CH4 selectivity of 80.9 % at 450 °C.

scholarly journals Novel Cobalt Complex as an Efficient Catalyst for Converting CO2 into Cyclic Carbonates under Mild Conditions

Catalysts ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 951
Author(s):  
Wei Fan ◽  
Wen-Zhen Wang ◽  
Li Wang ◽  
Xin-Gang Jia ◽  
Lei-Lei Li ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Catalytic System ◽  
Catalytic Mechanism ◽  
Cobalt Complex ◽  
Catalytic Performance ◽  
High Catalytic Activity ◽  
Cyclic Carbonates ◽  
Efficient Catalyst ◽  
Metal Centers ◽  
Mild Conditions

Based on the ligand H2dpPzda (1), a novel cobalt complex [Co(H2dpPzda)(NCS)2]·CH3OH(2) has been synthesized and characterized. The Complex 2 exhibited excellent catalytic performance for converting CO2 into cyclic carbonates under mild conditions. For propylene oxide (PO) and CO2 synthesis of propylene carbonate (PC), the catalytic system showed a remarkable TOF as high as 29,200 h−1. The catalytic system also showed broad substrate scope of epoxide. Additionally, the catalyst could be recycled to maintain the integrity of the structure and remained equal to the level of its catalytic activity even after seven catalytic rounds. Additionally, a possible catalytic mechanism was proposed due to the high catalytic activity which might be owing to the synergism of Lewis acidic metal centers and N group.

scholarly journals A diffusion anisotropy descriptor links morphology effects of H-ZSM-5 zeolites to their catalytic cracking performance

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Xiaoliang Liu ◽  
Jing Shi ◽  
Guang Yang ◽  
Jian Zhou ◽  
Chuanming Wang ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Catalytic Cracking ◽  
Catalytic Performance ◽  
Zeolite Catalysts ◽  
Time Resolved ◽  
Cracking Performance ◽  
Morphology Effect ◽  
Ft Ir ◽  
The Difference ◽  
Dynamics Simulations

AbstractZeolite morphology is crucial in determining their catalytic activity, selectivity and stability, but quantitative descriptors of such a morphology effect are challenging to define. Here we introduce a descriptor that accounts for the morphology effect in the catalytic performances of H-ZSM-5 zeolite for C4 olefin catalytic cracking. A series of H-ZSM-5 zeolites with similar sheet-like morphology but different c-axis lengths were synthesized. We found that the catalytic activity and stability is improved in samples with longer c-axis. Combining time-resolved in-situ FT-IR spectroscopy with molecular dynamics simulations, we show that the difference in catalytic performance can be attributed to the anisotropy of the intracrystalline diffusive propensity of the olefins in different channels. Our descriptor offers mechanistic insight for the design of highly effective zeolite catalysts for olefin cracking.

scholarly journals Ultra-Small Pd(0) Nanoparticles into a Designed Semisynthetic Lipase: An Efficient and Recyclable Heterogeneous Biohybrid Catalyst for the Heck Reaction under Mild Conditions

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2358 ◽  
Author(s):  
David Lopez-Tejedor ◽  
Blanca de las Rivas ◽  
Jose M. Palomo
Keyword(s):  
Catalytic Activity ◽  
Protein Structure ◽  
Heck Reaction ◽  
Catalytic Performance ◽  
Reducing Agent ◽  
Chemically Modified ◽  
Mild Conditions ◽  
In Situ Formation ◽  
Geobacillus Thermocatenulatus

A novel heterogeneous enzyme-palladium (Pd) (0) nanoparticles (PdNPs) bionanohybrid has been synthesized by an efficient, green, and straightforward methodology. A designed Geobacillus thermocatenulatus lipase (GTL) variant genetically and then chemically modified by the introduction of a tailor-made cysteine-containing complementary peptide- was used as the stabilizing and reducing agent for the in situ formation of ultra-small PdNPs nanoparticles embedded on the protein structure. This bionanohybrid was an excellent catalyst in the synthesis of trans-ethyl cinnamate by Heck reaction at 65 °C. It showed the best catalytic performance in dimethylformamide (DMF) containing 10–25% of water as a solvent but was also able to catalyze the reaction in pure DMF or with a higher amount of water as co-solvent. The recyclability and stability were excellent, maintaining more than 90% of catalytic activity after five cycles of use.

scholarly journals Pd–Ni Bimetallic Nanoparticles Supported on Zro2 as an Efficient Catalyst for Suzuki–Miyaura Reactions

2018 ◽  
Vol 42 (8) ◽  
pp. 419-423
Author(s):  
Li-Jie Zhang ◽  
Xian Yao ◽  
Ying-xin Sun ◽  
Jia-wei Zhang ◽  
Chun Cai
Keyword(s):  
Reduction Method ◽  
Bimetallic Nanoparticles ◽  
Bimetallic Catalyst ◽  
Cross Coupling ◽  
Catalytic Performance ◽  
Coupling Reactions ◽  
Efficient Catalyst ◽  
Mild Conditions ◽  
Cross Coupling Reactions ◽  
Excellent Catalytic Performance

Pd–Ni bimetallic nanoparticles (BMNPs) supported on ZrO2 were prepared by an impregnation–reduction method. The BMNPs showed excellent catalytic performance in Suzuki carbon–carbon cross-coupling reactions and almost quantitative conversion of the substrates was obtained under mild conditions in the absence of ligand. The excellent catalytic performance of the bimetallic catalyst could be a result of the synergistic effect between the two metal components. The catalyst showed outstanding recyclability during the reaction process; no obvious decrease in catalytic performance was observed after five cycles.

A highly efficient catalyst for Suzuki–Miyaura coupling reaction of benzyl chloride under mild conditions

RSC Advances ◽  
2014 ◽  
Vol 4 (69) ◽  
pp. 36437-36443 ◽  
Author(s):  
Zhenhong Guan ◽  
Buyi Li ◽  
Guoliang Hai ◽  
Xinjia Yang ◽  
Tao Li ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Benzyl Chloride ◽  
Coupling Reaction ◽  
Cross Coupling ◽  
Coupling Reactions ◽  
Efficient Catalyst ◽  
Microporous Polymers ◽  
Mild Conditions ◽  
Highly Efficient ◽  
Cross Coupling Reactions

Microporous polymers with built-in triphenylphosphine palladium exhibit highly efficient catalytic activity for cross-coupling reactions of benzyl chloride under mild conditions.

Preparation of Ni/ZrO2/SiO2 Catalyst and its Application in Hydrogenation of CO2 to Methane

2020 ◽  
Vol 1001 ◽  
pp. 79-83
Author(s):  
Zhen Xing Han ◽  
Si Xi Guo ◽  
Kai Ming Li ◽  
Bing Yao ◽  
Ming Song ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Low Temperature ◽  
Catalytic Performance ◽  
Experimental Results ◽  
Impregnation Method ◽  
Energy And Environment ◽  
Supported Ni ◽  
Hydrogenation Of Co

The hydrogenation of CO2 to CH4 can realize the utilization of CO2, which has an important implications to both the energy and environment. As a result of the low catalytic activity of the supported Ni/SiO2 catalyst, the ZrO2 is added to improve its catalytic performance by the impregnation method. The experimental results show that ZrO2 is an effective promoter to enhance the low-temperature catalytic activity of Ni/SiO2 catalyst.

scholarly journals Catalytic Activity of Polynuclear vs. Dinuclear Aroylhydrazone Cu(II) Complexes in Microwave-Assisted Oxidation of Neat Aliphatic and Aromatic Hydrocarbons

Molecules ◽  
2018 ◽  
Vol 24 (1) ◽  
pp. 47 ◽  
Author(s):  
Manas Sutradhar ◽  
Tannistha Barman ◽  
Armando Pombeiro ◽  
Luísa Martins
Keyword(s):  
Catalytic Activity ◽  
Aromatic Hydrocarbons ◽  
Catalytic Performance ◽  
Antiproliferative Agents ◽  
One Dimensional ◽  
X Ray ◽  
X Ray Crystallography ◽  
Mild Conditions ◽  
Microwave Assisted ◽  
Aliphatic And Aromatic Hydrocarbons

One-dimensional (1D) polynuclear Cu(II) complex (1) derived from (5-bromo-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H2L) is synthesized and characterized by elemental analysis, IR spectroscopy, ESI-MS, and single crystal X-ray crystallography. Its catalytic performance towards the solvent-free microwave-assisted peroxidative oxidation of aliphatic and aromatic hydrocarbons under mild conditions is compared with that of dinuclear Cu(II) complexes (2 and 3) of the same ligand, previously reported as antiproliferative agents. Polymer 1 exhibits the highest activity, either for the oxidation of cyclohexane (leading to overall yields, based on the alkane, of up to 39% of cyclohexanol and cyclohexanone) or towards the oxidation of toluene (selectively affording benzaldehyde up to a 44% yield), after 2 or 2.5 h of irradiation at 80 or 50 °C, respectively.

Large-scale and facile synthesis of a porous high-entropy alloy CrMnFeCoNi as an efficient catalyst

2020 ◽  
Vol 8 (35) ◽  
pp. 18318-18326 ◽  
Author(s):  
Hailong Peng ◽  
Yangcenzi Xie ◽  
Zicheng Xie ◽  
Yunfeng Wu ◽  
Wenkun Zhu ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Surface Area ◽  
Large Scale ◽  
High Surface ◽  
High Surface Area ◽  
Catalytic Performance ◽  
High Entropy Alloy ◽  
Facile Synthesis ◽  
Efficient Catalyst ◽  
High Entropy

Porous high entropy alloy CrMnFeCoNi exhibited remarkable catalytic activity and stability toward p-nitrophenol hydrogenation. The enhanced catalytic performance not only resulted from the high surface area, but also from exposed high-index facets with terraces.

Carbon Dioxide Hydrogenation to Methanol over Cu/ZnO-SBA-15 Catalyst: Effect of Metal Loading

2017 ◽  
Vol 380 ◽  
pp. 151-160 ◽  
Author(s):  
Sara Faiz Hanna Tasfy ◽  
Noor Asmawati Mohd Zabidi ◽  
Maizatul Shima Shaharun ◽  
Duvvria Subbarao ◽  
Ahmed Elbagir
Keyword(s):  
Catalytic Activity ◽  
Carbon Source ◽  
Active Sites ◽  
Low Cost ◽  
Fixed Bed ◽  
Textural Properties ◽  
Catalytic Performance ◽  
Hydrogenation Reaction ◽  
Supported Metal Catalysts ◽  
Metal Loading

Utilization of CO2 as a carbon source to produce valuable chemicals is one of the important ways to reduce the global warming caused by increasing CO2 in the atmosphere. Supported metal catalysts are crucial to produce clean and renewable fuels and chemicals from the stable CO2 molecules. The catalytic conversion of CO2 into methanol is recently under increased scrutiny as an opportunity to be used as a low-cost carbon source. Therefore, a series of the bimetallic Cu/ZnO-based catalyst supported by SBA-15 were synthesized via an impregnation technique with different total metal loading and tested in the catalytic hydrogenation of CO2 to methanol. The morphological and textural properties of the synthesized catalysts were determined by transmission electron microscopy (TEM), temperature programmed desorption, reduction, oxidation and pulse chemisorption (TPDRO), and N2-adsorption. The CO2 hydrogenation reaction was performed in a microactivity fixed-bed system at 250oC, 2.25 MPa, and H2/CO2 ratio of 3. Experimental results showed that the catalytic structure and performance were strongly affected by the loading of the active site. Where, the catalytic activity, the methanol selectivity as well as the space-time yield increased with increasing the metal loading until it reaches the maximum values at a metal loading of 15 wt% while further addition of metal inhibits the catalytic performance. The higher catalytic activity of 14% and methanol selectivity of 92% was obtained over a Cu/ZnO-SBA-15 catalyst with a total bimetallic loading of 15 wt%. The excellent performance of 15 wt% Cu/ZnO-SBA-15 catalyst is attributed to the presence of well dispersed active sites with small particle size, higher Cu surface area, and lower catalytic reducibility.

scholarly journals Friedel-Crafts acetylation of indole, 5-methoxyindole and 5-chloroindole using copper triflate under microwave irradiation

2016 ◽  
Vol 19 (4) ◽  
pp. 177-184
Author(s):  
Hai Truong Nguyen ◽  
Phuong Hoang Tran
Keyword(s):  
Catalytic Activity ◽  
Acetic Anhydride ◽  
Microwave Irradiation ◽  
Organic Synthesis ◽  
Significant Loss ◽  
Indole Derivatives ◽  
Efficient Catalyst ◽  
Acidic Catalyst ◽  
Mild Conditions

Friedel-Crafts acetylation is an important reaction in organic synthesis processes. Acetylation of indole derivatives with acetic anhydride as acylating reagent using Cu(OTf)2 as a catalyst has been investigated under microwave irradiation. Different from traditional Lewis acidic catalyst, Cu(OTf)2 was found to be an efficient catalyst for Friedel-Crafts acetylation of indoles under mild conditions. Moreover, Cu(OTf)2 was safe-to-handle, recovered and reused several times without significant loss of catalytic activity.

Sign in / Sign up

Export Citation Format

Share Document