Rainfall Contributions from Precipitation Systems with Different Sizes, Convective Intensities, and Durations over the Tropics and Subtropics

2011 ◽  
Vol 12 (3) ◽  
pp. 394-412 ◽  
Author(s):  
Chuntao Liu
Keyword(s):  
Grid Point ◽  
Tropical Rainfall Measuring Mission ◽  
Life Cycles ◽  
Diurnal Variations ◽  
Diurnal Cycles ◽  
Brightness Temperatures ◽  
Seasonal And Diurnal Variations ◽  
Microwave Imager ◽  
Rain Events ◽  
The Tropics

Abstract The rainfall contributions from precipitation features (PFs) with full spectra of different sizes and convective intensities over the tropics and subtropics are summarized using 12 yr of version 6 Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR) and Microwave Imager (TMI) observations. Regional, seasonal, and diurnal variations of the rainfall contributions from various PFs are shown, with the global distribution of the sizes, PR echo tops, maximum heights of 30 dBZ, and minimum TMI 85-GHz brightness temperatures of PFs above which contribute half of the rainfall in each 2° × 2° region. Though the results from radar and microwave observations generally agree with each other, some large differences exist over land. Seasonal variations of sizes and intensities of precipitation systems are found over the northeast Pacific, northern SPCZ, and some land areas in addition to the well-known monsoon regions. The diurnal cycles of rainfall over land and ocean are interpreted with the combinations of life cycles of various precipitation systems, using the diurnal variations of rainfall contributions from precipitation systems with different sizes and intensities. The long-duration rainfall events with more than four consecutive 3-h periods with rain at a grid point are identified from 11 yr of TRMM 3B42 products. These “12-h rain events” contribute a larger proportion of the total rainfall over ocean than over land. They are mostly correlated with precipitation systems with large sizes and intense convection. However, they can also be caused by some shallow persistent precipitation systems, such as those over the northeast slope of the Andes in Peru in spring and fall and over the west coast of India in summer.

Combined Radar and Radiometer Analysis of Precipitation Profiles for a Parametric Retrieval Algorithm

2005 ◽  
Vol 22 (7) ◽  
pp. 909-929 ◽  
Author(s):  
Hirohiko Masunaga ◽  
Christian D. Kummerow
Keyword(s):  
A Priori ◽  
Three Dimensional ◽  
Tropical Rainfall Measuring Mission ◽  
Dimensional Structure ◽  
Retrieval Algorithm ◽  
Brightness Temperatures ◽  
Precipitation Measurement ◽  
Microwave Imager ◽  
Trmm Microwave Imager ◽  
Global Precipitation

Abstract A methodology to analyze precipitation profiles using the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) and precipitation radar (PR) is proposed. Rainfall profiles are retrieved from PR measurements, defined as the best-fit solution selected from precalculated profiles by cloud-resolving models (CRMs), under explicitly defined assumptions of drop size distribution (DSD) and ice hydrometeor models. The PR path-integrated attenuation (PIA), where available, is further used to adjust DSD in a manner that is similar to the PR operational algorithm. Combined with the TMI-retrieved nonraining geophysical parameters, the three-dimensional structure of the geophysical parameters is obtained across the satellite-observed domains. Microwave brightness temperatures are then computed for a comparison with TMI observations to examine if the radar-retrieved rainfall is consistent in the radiometric measurement space. The inconsistency in microwave brightness temperatures is reduced by iterating the retrieval procedure with updated assumptions of the DSD and ice-density models. The proposed methodology is expected to refine the a priori rain profile database and error models for use by parametric passive microwave algorithms, aimed at the Global Precipitation Measurement (GPM) mission, as well as a future TRMM algorithms.

scholarly journals The Diurnal Cycle of Cloud-Top Height and Cloud Cover over the Southeastern Pacific as Observed by GOES-10

2013 ◽  
Vol 70 (8) ◽  
pp. 2393-2408 ◽  
Author(s):  
David Painemal ◽  
Patrick Minnis ◽  
Larry O'Neill
Keyword(s):  
Boundary Layer ◽  
Mixed Boundary ◽  
Phase Speed ◽  
Tropical Rainfall Measuring Mission ◽  
Sea Breeze ◽  
Air Entrainment ◽  
Liquid Water Path ◽  
Diurnal Cycles ◽  
Southeastern Pacific ◽  
Microwave Imager

Abstract The diurnal cycles in cloud-top height Htop and cloud fraction (CF) in the southeastern Pacific stratocumulus region were determined for October–November 2008 by analyzing data from Geostationary Operational Environmental Satellite-10 (GOES-10) according to a diurnal/semidiurnal harmonic fitting technique. The value of Htop was obtained by applying a formula based on a linear regression of the differences between GOES-10 cloud-top temperature and Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) satellite sea surface temperature, with a common 0.25° × 0.25° spatial resolution. A satellite liquid water path (LWP) climatology complemented this dataset. Southwestward transects of Htop and LWP anomalies reveal a coherent propagating signal from the coast in the afternoon, with a typical phase speed of 25 m s−1. This pattern is preceded by a subsidence wave that reaches its peak a few hours before the maximum in Htop and LWP anomalies. Coincident increases in LWP and Htop after the subsidence wave passes suggest that the boundary layer deepening promotes cloud thickening and increased LWP, which are likely maintained through a well-mixed boundary layer and sufficient moisture fluxes that can counteract the effect of dry air entrainment. The interference between the radiatively and subsidence wave–driven cycles gives rise to a semidiurnal cycle in Htop along the coast. While the semidiurnal amplitude is near 80 m close to the coast with a fraction of explained variance greater than 0.4, it decreases to 30 m offshore (80°W). Similar to Htop, CF also exhibits contrasting zonal differences, but with a smaller semidiurnal component. The phase of the semidiurnal harmonic resembles the subsidence propagation westward, and the noticeable land–sea breeze circulation at 26°S that extends 200 km offshore.

scholarly journals Inter-calibrating SMMR brightness temperatures over continental surfaces

2020 ◽  
Author(s):  
Samuel Favrichon ◽  
Carlos Jimenez ◽  
Catherine Prigent
Keyword(s):  
Land Surface ◽  
Microwave Remote Sensing ◽  
Calibration Method ◽  
Diurnal Cycles ◽  
Brightness Temperatures ◽  
Linear Correction ◽  
Long Time ◽  
Microwave Imager ◽  
Microwave Radiometers ◽  
Global Precipitation

Abstract. Microwave remote sensing can be used to monitor the time evolution of some key parameters over land, such as land surface temperature or surface water extent. Observations are made with instrument such as the Scanning Microwave Multichannel Radiometer (SMMR) before 1987, the Special Sensor Microwave/Imager (SSM/I) and the following Special Sensor Microwave Imager/Sounder (SSMIS) from 1987 and still operating, to the more recent Global Precipitation Mission Microwave Imager (GMI). As these instruments differ on some of their characteristics and use different calibration schemes, they need to be inter-calibrated before long time series products can be derived from the observations. Here an inter-calibration method is designed to remove major inconsistencies between the SMMR and other microwave radiometers for the 18 GHz and 37 GHz channels over continental surfaces. Because of a small overlap in observations and a ~6 h difference in overpassing times between SMMR and SSM/I, GMI was chosen as a reference despite the lack of a common observing period. The diurnal cycles from three years of GMI brightness temperatures are first calculated, and then used to evaluate SMMR differences. Based on a statistical analysis of the differences, a simple linear correction is implemented to calibrate SMMR on GMI. This correction is shown to also reduce the biases between SMMR and SSM/I, and can then be applied to SMMR observations to make them more coherent with existing data record of microwave brightness temperatures over continental surfaces.

scholarly journals Improved simulation of precipitation in the tropics using a modified BMJ scheme in WRF model

2015 ◽  
Vol 8 (5) ◽  
pp. 4019-4049
Author(s):  
R. Fonseca ◽  
T. Zhang ◽  
T. Y. Koh
Keyword(s):  
Grid Point ◽  
Wrf Model ◽  
Tropical Rainfall Measuring Mission ◽  
Important Variable ◽  
Weather Research And Forecasting ◽  
Climate Forecast System ◽  
Climate Forecast System Reanalysis ◽  
Wide Range ◽  
Dynamical Consistency ◽  
The Tropics

Abstract. The successful modelling of the observed precipitation, a very important variable for a wide range of climate applications, continues to be one of the major challenges that climate scientists face today. When the Weather Research and Forecasting (WRF) model is used to dynamically downscale the Climate Forecast System Reanalysis (CFSR) over the Indo-Pacific region, with analysis (grid-point) nudging, it is found that the cumulus scheme used, Betts–Miller–Janjić (BMJ), produces excessive rainfall suggesting that it has to be modified for this region. Experimentation has shown that the cumulus precipitation is not very sensitive to changes in the cloud efficiency but varies greatly in response to modifications of the temperature and humidity reference profiles. A new version of the scheme, denominated "modified BMJ" scheme, where the humidity reference profile is more moist, was developed and in tropical belt simulations it was found to give a better estimate of the observed precipitation, as given by the Tropical Rainfall Measuring Mission (TRMM) 3B42 dataset, than the default BMJ scheme for the whole tropics and both monsoon seasons. In fact, in some regions the model even outperforms CFSR. The advantage of modifying the BMJ scheme to produce better rainfall estimates lies in the final dynamical consistency of the rainfall with other dynamical and thermodynamical variables of the atmosphere.

Rain Retrieval from TMI Brightness Temperature Measurements Using a TRMM PR–Based Database

2006 ◽  
Vol 45 (3) ◽  
pp. 455-466 ◽  
Author(s):  
Nicolas Viltard ◽  
Corinne Burlaud ◽  
Christian D. Kummerow
Keyword(s):  
Brightness Temperature ◽  
Rain Rate ◽  
Tropical Rainfall Measuring Mission ◽  
High Standard ◽  
Brightness Temperatures ◽  
Trmm Pr ◽  
Microwave Imager ◽  
Point To Point ◽  
Trmm Microwave Imager ◽  
Test Database

Abstract This study focuses on improving the retrieval of rain from measured microwave brightness temperatures and the capability of the retrieved field to represent the mesoscale structure of a small intense hurricane. For this study, a database is constructed from collocated Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) and the TRMM Microwave Imager (TMI) data resulting in about 50 000 brightness temperature vectors associated with their corresponding rain-rate profiles. The database is then divided in two: a retrieval database of about 35 000 rain profiles and a test database of about 25 000 rain profiles. Although in principle this approach is used to build a database over both land and ocean, the results presented here are only given for ocean surfaces, for which the conditions for the retrieval are optimal. An algorithm is built using the retrieval database. This algorithm is then used on the test database, and results show that the error can be constrained to reasonable levels for most of the observed rain ranges. The relative error is nonetheless sensitive to the rain rate, with maximum errors at the low and high ends of the rain intensities (+60% and −30%, respectively) and a minimum error between 1 and 7 mm h−1. The retrieval method is optimized to exhibit a low total bias for climatological purposes and thus shows a high standard deviation on point-to-point comparisons. The algorithm is applied to the case of Hurricane Bret (1999). The retrieved rain field is analyzed in terms of structure and intensity and is then compared with the TRMM PR original rain field. The results show that the mesoscale structures are indeed well reproduced even if the retrieved rain misses the highest peaks of precipitation. Nevertheless, the mesoscale asymmetries are well reproduced and the maximum rain is found in the correct quadrant. Once again, the total bias is low, which allows for future calculation of the heat sources/sinks associated with precipitation production and evaporation.

scholarly journals Validation of Satellite-Based High-Resolution Rainfall Products over the Korean Peninsula Using Data from a Dense Rain Gauge Network

2010 ◽  
Vol 49 (4) ◽  
pp. 701-714 ◽  
Author(s):  
B. J. Sohn ◽  
Hyo-Jin Han ◽  
Eun-Kyoung Seo
Keyword(s):  
High Resolution ◽  
Tropical Rainfall Measuring Mission ◽  
Rain Gauge ◽  
Diurnal Cycles ◽  
South Korean ◽  
Precipitation Estimation ◽  
Surface Measurements ◽  
Rain Events ◽  
Using Data ◽  
June July

Abstract Four independently developed high-resolution precipitation products [HRPPs; the Tropical Rainfall Measuring Mission (TRMM) Multisatellite Precipitation Analysis (TMPA), the Climate Prediction Center Morphing Method (CMORPH), Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks (PERSIANN), and the National Research Laboratory (NRL) blended precipitation dataset (NRL-blended)], with a spatial resolution of 0.25° and a temporal resolution of 3 h, were compared with surface rain measurements for the four summer seasons (June, July, and August) from 2003 to 2006. Surface measurements are 1-min rain gauge data from the Automated Weather Station (AWS) network operated by the Korean Meteorological Administration (KMA) over South Korea, which consists of about 520 sites. The summer mean rainfall and diurnal cycles of TMPA are comparable to those of the AWS, but with larger magnitudes. The closer agreement of TMPA with surface observations is due to the adjustment of the real-time version of TMPA products to monthly gauge measurements. However, the adjustment seems to result in significant overestimates for light or moderate rain events and thus increased RMS error. In the other three products (CMORPH, PERSIANN, and NRL-blended), significant underestimates are evident in the summer mean distribution and in scatterplots for the grid-by-grid comparison. The magnitudes of the diurnal cycles of the three products appear to be much smaller than those suggested by AWS, although CMORPH shows nearly the same diurnal phase as in AWS. Such underestimates by three methods are likely due to the deficiency of the passive microwave (PMW)-based rainfall retrievals over the South Korean region. More accurate PMW measurements (in particular by the improved land algorithm) seem to be a prerequisite for better estimates of the rain rate by HRPP algorithms. This paper further demonstrates the capability of the Korean AWS network data for validating satellite-based rain products.

scholarly journals Relating Passive 37-GHz Scattering to Radar Profiles in Strong Convection

2011 ◽  
Vol 50 (1) ◽  
pp. 233-240 ◽  
Author(s):  
Daniel J. Cecil
Keyword(s):  
Central Africa ◽  
Tropical Rainfall Measuring Mission ◽  
The United States ◽  
Phase Layer ◽  
Tropical Ocean ◽  
Convective Systems ◽  
Freezing Level ◽  
Brightness Temperatures ◽  
Microwave Imager ◽  
Ice Water

Abstract Tropical Rainfall Measuring Mission (TRMM) Microwave Imager and precipitation radar measurements are examined for strong convective systems. Storms having similar values of minimum 37-GHz polarization-corrected temperature (PCT) are grouped together, and their vertical profiles of maximum radar reflectivity are composited. Lower 37-GHz PCT corresponds to stronger radar profiles (high reflectivity through a deep layer), but characteristic profiles for a given 37-GHz PCT are different for deep tropical ocean, deep tropical land, subtropical ocean, and subtropical land regions. Tropical oceanic storms have a sharper decrease of reflectivity just above the freezing level than storms from other regions with the same brightness temperature. Storms from subtropical land regions have the slowest decrease of reflectivity with height and the greatest mixed-phase-layer ice water content (IWC). Linear fits of 37-GHz PCT versus IWC for each region are used to scale the brightness temperatures. Counts of storms with these scaled brightness temperatures below certain thresholds suggest that not as many of the strongest storms occur in central Africa as in subtropical parts of South America, the United States, and central Asia.

scholarly journals Improved simulation of precipitation in the tropics using a modified BMJ scheme in the WRF model

2015 ◽  
Vol 8 (9) ◽  
pp. 2915-2928 ◽  
Author(s):  
R. M. Fonseca ◽  
T. Zhang ◽  
K.-T. Yong
Keyword(s):  
Grid Point ◽  
Wrf Model ◽  
Tropical Rainfall Measuring Mission ◽  
Important Variable ◽  
Weather Research And Forecasting ◽  
Data Set ◽  
Climate Forecast System Reanalysis ◽  
Wide Range ◽  
Dynamical Consistency ◽  
The Tropics

Abstract. The successful modelling of the observed precipitation, a very important variable for a wide range of climate applications, continues to be one of the major challenges that climate scientists face today. When the Weather Research and Forecasting (WRF) model is used to dynamically downscale the Climate Forecast System Reanalysis (CFSR) over the Indo-Pacific region, with analysis (grid-point) nudging, it is found that the cumulus scheme used, Betts–Miller–Janjić (BMJ), produces excessive rainfall suggesting that it has to be modified for this region. Experimentation has shown that the cumulus precipitation is not very sensitive to changes in the cloud efficiency but varies greatly in response to modifications of the temperature and humidity reference profiles. A new version of the scheme, denoted "modified BMJ" scheme, where the humidity reference profile is more moist, was developed. In tropical belt simulations it was found to give a better estimate of the observed precipitation as given by the Tropical Rainfall Measuring Mission (TRMM) 3B42 data set than the default BMJ scheme for the whole tropics and both monsoon seasons. In fact, in some regions the model even outperforms CFSR. The advantage of modifying the BMJ scheme to produce better rainfall estimates lies in the final dynamical consistency of the rainfall with other dynamical and thermodynamical variables of the atmosphere.

scholarly journals Comparisons of Instantaneous TRMM Ground Validation and Satellite Rain-Rate Estimates at Different Spatial Scales

2008 ◽  
Vol 47 (8) ◽  
pp. 2215-2237 ◽  
Author(s):  
David B. Wolff ◽  
Brad L. Fisher
Keyword(s):  
Rain Rate ◽  
Spatial Scales ◽  
Tropical Rainfall Measuring Mission ◽  
Heavy Rain ◽  
Global Ocean ◽  
Ground Validation ◽  
Microwave Imager ◽  
Rain Events ◽  
Trmm Microwave Imager ◽  
Rain Rates

Abstract This study provides a comprehensive intercomparison of instantaneous rain rates observed by the two rain sensors aboard the Tropical Rainfall Measuring Mission (TRMM) satellite with ground data from two regional sites established for long-term ground validation: Kwajalein Atoll and Melbourne, Florida. The satellite rain algorithms utilize remote observations of precipitation collected by the TRMM Microwave Imager (TMI) and the Precipitation Radar (PR) aboard the TRMM satellite. Three standard level II rain products are generated from operational applications of the TMI, PR, and combined (COM) rain algorithms using rain information collected from the TMI and the PR along the orbital track of the TRMM satellite. In the first part of the study, 0.5° × 0.5° instantaneous rain rates obtained from the TRMM 3G68 product were analyzed and compared to instantaneous Ground Validation (GV) program rain rates gridded at a scale of 0.5° × 0.5°. In the second part of the study, TMI, PR, COM, and GV rain rates were spatiotemporally matched and averaged at the scale of the TMI footprint (∼150 km2). This study covered a 6-yr period (1999–2004) and consisted of over 50 000 footprints for each GV site. In the first analysis, the results showed that all of the respective rain-rate estimates agree well, with some exceptions. The more salient differences were associated with heavy rain events in which one or more of the algorithms failed to properly retrieve these extreme events. Also, it appears that there is a preferred mode of precipitation for TMI rain rates at or near 2 mm h−1 over the ocean. This mode was noted over ocean areas of Kwajalein and Melbourne and has been observed in TRMM tropical–global ocean areas as well.

scholarly journals Differences of Rainfall Estimates over Land by Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR) and TRMM Microwave Imager (TMI)—Dependence on Storm Height

2005 ◽  
Vol 44 (3) ◽  
pp. 367-383 ◽  
Author(s):  
Fumie A. Furuzawa ◽  
Kenji Nakamura
Keyword(s):  
Tropical Rainfall Measuring Mission ◽  
Local Times ◽  
Precipitation Radar ◽  
Tropical Rainfall ◽  
Convective Rain ◽  
Brightness Temperatures ◽  
Trmm Precipitation ◽  
Microwave Imager ◽  
Trmm Microwave Imager ◽  
Orbit Data

Abstract It is well known that precipitation rate estimation is poor over land. Using the Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) and TRMM Microwave Imager (TMI), the performance of the TMI rain estimation was investigated. Their differences over land were checked by using the orbit-by-orbit data for June 1998, December 1998, January 1999, and February 1999, and the following results were obtained: 1) Rain rate (RR) near the surface for the TMI (TMI-RR) is smaller than that for the PR (PR-RR) in winter; it is also smaller from 0900 to 1800 LT. These dependencies show some variations at various latitudes or local times. 2) When the storm height is low (<5 km), the TMI-RR is smaller than the PR-RR; when it is high (>8 km), the PR-RR is smaller. These dependencies of the RR on the storm height do not depend on local time or latitude. The tendency for a TMI-RR to be smaller when the storm height is low is more noticeable in convective rain than in stratiform rain. 3) Rain with a low storm height predominates in winter or from 0600 to 1500 LT, and convective rain occurs frequently from 1200 to 2100 LT. Result 1 can be explained by results 2 and 3. It can be concluded that the TMI underestimates rain with low storm height over land because of the weakness of the TMI algorithm, especially for convective rain. On the other hand, it is speculated that TMI overestimates rain with high storm height because of the effect of anvil rain with low brightness temperatures at high frequencies without rain near the surface, and because of the effect of evaporation or tilting, which is indicated by a PR profile and does not appear in the TMI profile. Moreover, it was found that the PR rain for the cases with no TMI rain amounted to about 10%–30% of the total but that the TMI rain for the cases with no PR rain accounted for only a few percent of the TMI rain. This result can be explained by the difficulty of detecting shallow rain with the TMI.

Sign in / Sign up

Export Citation Format

Share Document