scholarly journals Lidar Measurement of Boundary Layer Evolution to Determine Sensible Heat Fluxes

2005 ◽  
Vol 6 (6) ◽  
pp. 840-853 ◽  
Author(s):  
W. E. Eichinger ◽  
H. E. Holder ◽  
R. Knight ◽  
J. Nichols ◽  
D. I. Cooper ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Potential Temperature ◽  
Sensible Heat Flux ◽  
Heat Fluxes ◽  
Eddy Correlation ◽  
High Time Resolution ◽  
Lidar Measurement ◽  
Sensible Heat ◽  
Creek Watershed

Abstract The Soil Moisture–Atmosphere Coupling Experiment (SMACEX) was conducted in the Walnut Creek watershed near Ames, Iowa, over the period from 15 June to 11 July 2002. A main focus of SMACEX is the investigation of the interactions between the atmospheric boundary layer, surface moisture, and canopy. A vertically staring elastic lidar was used to provide a high-time-resolution continuous record of the boundary layer height at the edge between a soybean and cornfield. The height and thickness of the entrainment zone are used to estimate the surface sensible heat flux using the Batchvarova–Gryning boundary layer model. Flux estimates made over 6 days are compared to conventional eddy correlation measurements. The calculated values of the sensible heat flux were found to be well correlated (R2 = 0.79, with a slope of 0.95) when compared to eddy correlation measurements in the area. The standard error of the flux estimates was 21.4 W m−2 (31% rms difference between this method and surface measurements), which is somewhat higher than a predicted uncertainty of 16%. The major sources of error were from the estimates of the vertical potential temperature gradient and an assumption that the entrainment parameter A was equal to the ratio of the entrainment flux and the surface heat flux.

Boundary Layer Characteristics over Areas of Inhomogeneous Surface Fluxes

1995 ◽  
Vol 34 (2) ◽  
pp. 559-571 ◽  
Author(s):  
J. C. Doran ◽  
W. J. Shaw ◽  
J. M. Hubbe
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Layer Structure ◽  
Potential Temperature ◽  
Sensible Heat Flux ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Inhomogeneous Surface ◽  
A Site

Abstract This paper describes results from a June 1992 field program to study the response of the boundary layer over a site with well-defined extreme differences in sensible and latent heat fluxes over clearly separated areas, each with characteristic length scales of 10 km or more. The experiment region consisted of semiarid grassland steppe and irrigated farmland. Sensible heat flux maxima over the steppe regularly reached values in excess of 300 W m−2 and were typically a factor of 4 or more greater than those over the farmland. Two days were selected for analysis: one with moderate winds of 7–10 m s−1 and one with lighter winds of 4–7 m s−1 over the steppe. In both cases the wind directions were nearly perpendicular to the boundary between the steppe and farm. An analysis of potential temperature soundings showed that mixed-layer characteristics over both the farm and the steppe were largely determined by heating over the steppe, with advection from the steppe to the farm playing a significant role. On the day with the lighter winds, a secondary circulation related to the thermal contrasts between the two areas was observed. A simple conceptual model is described that predicts the extent of the cooler area required to generate such circulations. The observations illustrate how predictions of boundary layer structure in terms of local surface sensible heat fluxes may be compromised by advective effects. Such difficulties complicate efforts to obtain accurate representations of surface fluxes over inhomogeneous surfaces even if parameterizations of mesoscale contributions to the heat flux are included.

scholarly journals Improving Computation of Sensible Heat Flux over a Water Surface Using the Variational Method

2006 ◽  
Vol 7 (4) ◽  
pp. 678-686 ◽  
Author(s):  
Zuohao Cao ◽  
Jianmin Ma ◽  
Wayne R. Rouse
Keyword(s):  
Heat Flux ◽  
Variational Method ◽  
Gradient Method ◽  
Similarity Theory ◽  
Sensible Heat Flux ◽  
Open Water ◽  
Heat Fluxes ◽  
Eddy Correlation ◽  
Sensible Heat ◽  
Flux Gradient

Abstract In this study, the authors have performed the variational computations for surface sensible heat fluxes over a large northern lake using observed wind, temperature gradient, and moisture gradient. In contrast with the conventional (Monin–Obukhov similarity theory) MOST-based flux-gradient method, the variational approach sufficiently utilizes observational meteorological conditions over the lake, where the conventional flux-gradient method performs poorly. Verifications using direct eddy-correlation measurements over Great Slave Lake, the fifth largest lake in North America in terms of surface area, during the open water period of 1999 demonstrate that the variational method yields good agreements between the computed and the measured sensible heat fluxes. It is also demonstrated that the variational method is more accurate than the flux-gradient method in computations of sensible heat flux across the air–water interface.

scholarly journals Uncertainty analysis of computational methods for deriving sensible heat flux values from scintillometer measurements

2009 ◽  
Vol 2 (3) ◽  
pp. 1383-1417 ◽  
Author(s):  
P. A. Solignac ◽  
A. Brut ◽  
J.-L. Selves ◽  
J.-P. Béteille ◽  
J.-P. Gastellu-Etchegorry ◽  
...  
Keyword(s):  
Heat Flux ◽  
Classical Method ◽  
Sensible Heat Flux ◽  
Bowen Ratio ◽  
Heat Fluxes ◽  
Eddy Correlation ◽  
Time Averaging ◽  
Sensible Heat ◽  
Ratio Measurement ◽  
The Impact

Abstract. The use of scintillometers to determine sensible heat fluxes is now common in studies of land-atmosphere interactions. The main interest in these instruments is due to their ability to quantify energy distributions at the landscape scale, as they can calculate sensible heat flux values over long distances, in contrast to Eddy Correlation systems. However, scintillometer data do not provide a direct measure of sensible heat flux, but require additional data, such as the Bowen ratio (β), to provide flux values. The Bowen ratio can either be measured using Eddy Correlation systems or derived from the energy balance closure. In this work, specific requirements for estimating energy fluxes using a scintillometer were analyzed, as well as the accuracy of two flux calculation methods. We first focused on the classical method (used in standard software). We analysed the impact of the Bowen ratio according to both time averaging and ratio values; for instance, an averaged Bowen ratio (β) of less than 1 proved to be a significant source of measurement uncertainty. An alternative method, called the "β-closure method", for which the Bowen ratio measurement is not necessary, was also tested. In this case, it was observed that even for low β values, flux uncertainties were reduced and scintillometer data were well correlated with the Eddy Correlation results.

scholarly journals Potential and Limitations in Estimating Sensible-Heat-Flux Profiles from Consecutive Temperature Profiles Using Remotely-Piloted Aircraft Systems

2019 ◽  
Vol 174 (1) ◽  
pp. 145-177 ◽  
Author(s):  
Line Båserud ◽  
Joachim Reuder ◽  
Marius O. Jonassen ◽  
Timothy A. Bonin ◽  
Phillip B. Chilson ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Mesoscale Model ◽  
Potential Temperature ◽  
Sensible Heat Flux ◽  
Time Of Day ◽  
Sensible Heat ◽  
Tethered Balloon ◽  
Flux Divergence ◽  
Remotely Piloted Aircraft

Abstract Profiles of the sensible heat flux are key to understanding atmospheric-boundary-layer (ABL) structure and development. Based on temperature profiling by a remotely-piloted aircraft system (RPAS), the Small Unmanned Meteorological Observer (SUMO) platform, during the Boundary Layer Late Afternoon and Sunset Turbulence (BLLAST) field campaign, 108 heat-flux profiles are estimated using a simplified version of the prognostic equation for potential temperature $$\theta $$θ that relates the tendency in $$\theta $$θ to the flux divergence over the time span between two consecutive flights. We validate for the first time RPAS-based heat-flux profiles against a network of 12 ground-based eddy-covariance stations (2–60 m above ground), in addition to a comparison with fluxes from a manned aircraft and a tethered balloon, enabling the detailed investigation of the potential and limitations related to this technique for obtaining fluxes from RPAS platforms. We find that appropriate treatment of horizontal advection is crucial for obtaining realistic flux values, and present correction methods specific to the state of the ABL. Advection from a mesoscale model is also tested as another correction method. The SUMO heat-flux estimates with appropriate corrections compare well with the reference measurements, with differences in the performance depending on the time of day, since the evening period shows the best results (94$$\%$$% within the spread of ground stations), and the afternoon period shows the poorest results (63$$\%$$% within the spread). The diurnal cycle of the heat flux is captured by the SUMO platform for several days, with the flux values from the manned aircraft and tethered balloon coinciding well with those from the SUMO platform.

scholarly journals Estimation of Sensible Heat Flux and Atmospheric Boundary Layer Height Using an Unmanned Aerial Vehicle

Atmosphere ◽  
2019 ◽  
Vol 10 (7) ◽  
pp. 363 ◽  
Author(s):  
Min-Seong Kim ◽  
Byung Hyuk Kwon
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Wind Speed ◽  
Atmospheric Boundary Layer ◽  
Unmanned Aerial Vehicle ◽  
Sensible Heat Flux ◽  
Eddy Correlation ◽  
Sensible Heat ◽  
Aerial Vehicle ◽  
Transfer Method

In this work, sensible heat flux estimated using a bulk transfer method was validated with a three-dimensional ultrasonic anemometer or surface layer scintillometer at various sites. Results indicate that it remains challenging to obtain temperature and wind speed at an appropriate reference height. To overcome this, alternative observations using an unmanned aerial vehicle (UAV) were considered. UAV-based wind speed and sensible heat flux were indirectly estimated and atmospheric boundary layer (ABL) height was then derived using the sensible heat flux data. UAV-observed air temperature was measured by attaching a temperature sensor 40 cm above the rotary-wing of the UAV, and UAV-based wind speed was estimated using attitude data (pitch, roll, and yaw angles) recorded using the UAV’s inertial measurement unit. UAV-based wind speed was close to the automatic weather system-observed wind speed, within an error range of approximately 10%. UAV-based sensible heat flux estimated from the bulk transfer method corresponded with sensible heat flux determined using the eddy correlation method, within an error of approximately 20%. A linear relationship was observed between the normalized UAV-based sensible heat flux and radiosonde-based normalized ABL height.

scholarly journals An Application of the Variational Method to Computation of Sensible Heat Flux over a Deciduous Forest

2005 ◽  
Vol 44 (1) ◽  
pp. 144-152 ◽  
Author(s):  
Zuohao Cao ◽  
Jianmin Ma
Keyword(s):  
Heat Flux ◽  
Variational Method ◽  
Forest Canopy ◽  
Deciduous Forest ◽  
Sensible Heat Flux ◽  
Meteorological Conditions ◽  
Heat Fluxes ◽  
Eddy Correlation ◽  
Sensible Heat ◽  
Variance Method

Abstract A variational method is employed to compute surface sensible heat fluxes over a deciduous forest using observed temperature, temperature variance, and wind. Because the variational approach is able to take into account comprehensive observational meteorological conditions over a heterogeneous surface, it is applicable to the computations of sensible heat flux over a forest canopy in which the conventional flux-variance method is difficult to use. Verifications using the direct eddy-correlation measurements over a deciduous forest during the fully leafed summer of 1988 and the leafless winter of 1990 show that the variational method yields very good agreements between the computed and the measured sensible heat fluxes. It is also shown that the variational method is much more accurate than the flux-variance method in computations of sensible heat flux over a forest canopy.

scholarly journals Parameterization of Inversion Breakup in Idealized Valleys. Part I: The Adjustable Model Parameters

2006 ◽  
Vol 45 (4) ◽  
pp. 600-608 ◽  
Author(s):  
N. M. Zoumakis ◽  
G. A. Efstathiou
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Convective Boundary Layer ◽  
Sensible Heat Flux ◽  
Layer Growth ◽  
Heat Fluxes ◽  
Future Research ◽  
Model Parameters ◽  
Sensible Heat ◽  
Convective Boundary

Abstract The factors that affect the atmospheric energy budget approach used in the thermodynamic valley inversion destruction model of Whiteman and McKee are investigated theoretically. The height at which the sinking inversion top meets the rising convective boundary layer to destroy valley inversions can be uniquely determined by the topographic characteristics of the valley and an adjustable model parameter, relating to the fraction of sensible heat flux going to convective boundary layer growth, through a simple parabolic relationship. The time required to break a temperature inversion can be expressed with very good approximation as a simple power-law function of the topographic parameters and the fraction of extraterrestrial solar flux that is partitioned to sensible heat flux in the valley atmosphere. The theoretical estimates compare very favorably to predictions from the bulk thermodynamic model of Whiteman and McKee. A new approach to handle time-dependent sensible heat fluxes is outlined. The paper ends with recommendations for future research.

scholarly journals The impact of broadleaved woodland on water resources in lowland UK: II. Evaporation estimates from sensible heat flux measurements over beech woodland and grass on chalk sites in Hampshire

2005 ◽  
Vol 9 (6) ◽  
pp. 607-613 ◽  
Author(s):  
J. Roberts ◽  
P. Rosier ◽  
D. M. Smith
Keyword(s):  
Heat Flux ◽  
Energy Balance ◽  
Excellent Agreement ◽  
Sensible Heat Flux ◽  
Late Summer ◽  
Eddy Correlation ◽  
Sensible Heat ◽  
Flux Measurements ◽  
Shallow Soils ◽  
The Impact

Abstract. The impact on recharge to the Chalk aquifer of substitution of broadleaved woodland for pasture is a matter of concern in the UK. Hence, measurements of energy balance components were made above beech woodland and above pasture, both growing on shallow soils over chalk in Hampshire. Latent heat flux (evaporation) was calculated as the residual from these measurements of energy balances in which sensible heat flux was measured with an eddy correlation instrument that determined fast response vertical wind speeds and associated temperature changes. Assessment of wind turbulence statistics confirmed that the eddy correlation device performed satisfactorily in both wet and dry conditions. There was excellent agreement between forest transpiration measurements made by eddy correlation and stand level tree transpiration measured with sap flow devices. Over the period of the measurements, from March 1999 to late summer 2000, changes in soil water content were small and grassland evaporation and transpiration estimated from energy balance-eddy flux measurements were in excellent agreement with Penman estimates of potential evaporation. Over the 18-month measurement period, the cumulative difference between broadleaved woodland and grassland was small but evaporation from the grassland was 3% higher than that from the woodland. In the springs of 1999 and 2000, evaporation from the grassland was greater than that from the woodland. However, following leaf emergence in the woodland, the difference in cumulative evaporation diminished until the following spring.

Sign in / Sign up

Export Citation Format

Share Document