Boundary Layer Characteristics over Areas of Inhomogeneous Surface Fluxes

1995 ◽  
Vol 34 (2) ◽  
pp. 559-571 ◽  
Author(s):  
J. C. Doran ◽  
W. J. Shaw ◽  
J. M. Hubbe
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Layer Structure ◽  
Potential Temperature ◽  
Sensible Heat Flux ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Inhomogeneous Surface ◽  
A Site

Abstract This paper describes results from a June 1992 field program to study the response of the boundary layer over a site with well-defined extreme differences in sensible and latent heat fluxes over clearly separated areas, each with characteristic length scales of 10 km or more. The experiment region consisted of semiarid grassland steppe and irrigated farmland. Sensible heat flux maxima over the steppe regularly reached values in excess of 300 W m−2 and were typically a factor of 4 or more greater than those over the farmland. Two days were selected for analysis: one with moderate winds of 7–10 m s−1 and one with lighter winds of 4–7 m s−1 over the steppe. In both cases the wind directions were nearly perpendicular to the boundary between the steppe and farm. An analysis of potential temperature soundings showed that mixed-layer characteristics over both the farm and the steppe were largely determined by heating over the steppe, with advection from the steppe to the farm playing a significant role. On the day with the lighter winds, a secondary circulation related to the thermal contrasts between the two areas was observed. A simple conceptual model is described that predicts the extent of the cooler area required to generate such circulations. The observations illustrate how predictions of boundary layer structure in terms of local surface sensible heat fluxes may be compromised by advective effects. Such difficulties complicate efforts to obtain accurate representations of surface fluxes over inhomogeneous surfaces even if parameterizations of mesoscale contributions to the heat flux are included.

scholarly journals Lidar Measurement of Boundary Layer Evolution to Determine Sensible Heat Fluxes

2005 ◽  
Vol 6 (6) ◽  
pp. 840-853 ◽  
Author(s):  
W. E. Eichinger ◽  
H. E. Holder ◽  
R. Knight ◽  
J. Nichols ◽  
D. I. Cooper ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Potential Temperature ◽  
Sensible Heat Flux ◽  
Heat Fluxes ◽  
Eddy Correlation ◽  
High Time Resolution ◽  
Lidar Measurement ◽  
Sensible Heat ◽  
Creek Watershed

Abstract The Soil Moisture–Atmosphere Coupling Experiment (SMACEX) was conducted in the Walnut Creek watershed near Ames, Iowa, over the period from 15 June to 11 July 2002. A main focus of SMACEX is the investigation of the interactions between the atmospheric boundary layer, surface moisture, and canopy. A vertically staring elastic lidar was used to provide a high-time-resolution continuous record of the boundary layer height at the edge between a soybean and cornfield. The height and thickness of the entrainment zone are used to estimate the surface sensible heat flux using the Batchvarova–Gryning boundary layer model. Flux estimates made over 6 days are compared to conventional eddy correlation measurements. The calculated values of the sensible heat flux were found to be well correlated (R2 = 0.79, with a slope of 0.95) when compared to eddy correlation measurements in the area. The standard error of the flux estimates was 21.4 W m−2 (31% rms difference between this method and surface measurements), which is somewhat higher than a predicted uncertainty of 16%. The major sources of error were from the estimates of the vertical potential temperature gradient and an assumption that the entrainment parameter A was equal to the ratio of the entrainment flux and the surface heat flux.

Observed Impact of Atmospheric Aerosols on the Surface Energy Budget

2013 ◽  
Vol 17 (14) ◽  
pp. 1-22 ◽  
Author(s):  
Allison L. Steiner ◽  
Dori Mermelstein ◽  
Susan J. Cheng ◽  
Tracy E. Twine ◽  
Andrew Oliphant
Keyword(s):  
Heat Flux ◽  
Surface Energy ◽  
Latent Heat ◽  
Atmospheric Aerosols ◽  
Sensible Heat Flux ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Surface Energy Budget ◽  
Environmental Drivers ◽  
Sensible Heat

Abstract Atmospheric aerosols scatter and potentially absorb incoming solar radiation, thereby reducing the total amount of radiation reaching the surface and increasing the fraction that is diffuse. The partitioning of incoming energy at the surface into sensible heat flux and latent heat flux is postulated to change with increasing aerosol concentrations, as an increase in diffuse light can reach greater portions of vegetated canopies. This can increase photosynthesis and transpiration rates in the lower canopy and potentially decrease the ratio of sensible to latent heat for the entire canopy. Here, half-hourly and hourly surface fluxes from six Flux Network (FLUXNET) sites in the coterminous United States are evaluated over the past decade (2000–08) in conjunction with satellite-derived aerosol optical depth (AOD) to determine if atmospheric aerosols systematically influence sensible and latent heat fluxes. Satellite-derived AOD is used to classify days as high or low AOD and establish the relationship between aerosol concentrations and the surface energy fluxes. High AOD reduces midday net radiation by 6%–65% coupled with a 9%–30% decrease in sensible and latent heat fluxes, although not all sites exhibit statistically significant changes. The partitioning between sensible and latent heat varies between ecosystems, with two sites showing a greater decrease in latent heat than sensible heat (Duke Forest and Walker Branch), two sites showing equivalent reductions (Harvard Forest and Bondville), and one site showing a greater decrease in sensible heat than latent heat (Morgan–Monroe). These results suggest that aerosols trigger an ecosystem-dependent response to surface flux partitioning, yet the environmental drivers for this response require further exploration.

scholarly journals Sensible Heat Fluxes in the Nearly Neutral Boundary Layer: The Impact of Frictional Heating within the Surface Layer

2019 ◽  
Vol 76 (4) ◽  
pp. 1039-1053
Author(s):  
J. M. Edwards
Keyword(s):  
Boundary Layer ◽  
Surface Layer ◽  
Frictional Heating ◽  
Sensible Heat Flux ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Simple Modification ◽  
Neutral Boundary Layer ◽  
The Impact

Abstract The effect of frictional dissipative heating on the calculation of surface fluxes in the atmospheric boundary layer using bulk flux formulas is considered. Although the importance of frictional dissipation in intense storms has been widely recognized, it is suggested here that its impact is also to be seen at more moderate wind speeds in apparently enhanced heat transfer coefficients and countergradient fluxes in nearly neutral conditions. A simple modification to the bulk flux formula can be made to account for its impact within the surface layer. This modification is consistent with an interpretation of the surface layer as one across which the flux of total energy is constant. The effect of this modification on tropical cyclones is assessed in an idealized model, where it is shown to reduce the predicted maximum wind speed by about 4%. In numerical simulations of three individual storms, the impacts are more subtle but indicate a reduction of the sensible heat flux into the storm and a cooling of the surface layer.

scholarly journals Fetch Effect on Flux-Variance Estimations of Sensible and Latent Heat Fluxes of Camellia Sinensis

Atmosphere ◽  
2019 ◽  
Vol 10 (6) ◽  
pp. 299
Author(s):  
Noman Ali Buttar ◽  
Hu Yongguang ◽  
Josef Tanny ◽  
M Waqar Akram ◽  
Abdul Shabbir
Keyword(s):  
Heat Flux ◽  
Eddy Covariance ◽  
Latent Heat ◽  
Sensible Heat Flux ◽  
Soil Heat Flux ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Effect Of Temperature ◽  
Sensible Heat ◽  
Fine Wire

Precise estimation of surface-atmosphere exchange is a major challenge in micrometeorology. Previous literature presented the eddy covariance (EC) as the most reliable method for the measurements of such fluxes. Nevertheless, the EC technique is quite expensive and complex, hence other simpler methods are sought. One of these methods is Flux-Variance (FV). The FV method estimates sensible heat flux (H) using high frequency (~10Hz) air temperature measurements by a fine wire thermocouple. Additional measurements of net radiation (Rn) and soil heat flux (G) allow the derivation of latent heat flux (LE) as the residual of the energy balance equation. In this study, the Flux Variance method was investigated, and the results were compared against eddy covariance measurements. The specific goal of the present study was to assess the performance of the FV method for the estimation of surface fluxes along a variable fetch. Experiment was carried out in a tea garden; an EC system measured latent and sensible heat fluxes and five fine-wire thermocouples were installed towards the wind dominant direction at different distances (fetch) of TC1 = 170 m, TC2 = 165 m, TC3 = 160 m, TC4 = 155 m and TC5 = 150 m from the field edge. Footprint analysis was employed to examine the effect of temperature measurement position on the ratio between 90% footprint and measurement height. Results showed a good agreement between FV and EC measurements of sensible heat flux, with all regression coefficients (R2) larger than 0.6; the sensor at 170 m (TC1), nearest to the EC system, had highest R2 = 0.86 and lowest root mean square error (RMSE = 25 Wm−2). The estimation of LE at TC1 was also in best agreement with eddy covariance, with the highest R2 = 0.90. The FV similarity constant varied along the fetch within the range 2.2–2.4.

scholarly journals Potential and Limitations in Estimating Sensible-Heat-Flux Profiles from Consecutive Temperature Profiles Using Remotely-Piloted Aircraft Systems

2019 ◽  
Vol 174 (1) ◽  
pp. 145-177 ◽  
Author(s):  
Line Båserud ◽  
Joachim Reuder ◽  
Marius O. Jonassen ◽  
Timothy A. Bonin ◽  
Phillip B. Chilson ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Mesoscale Model ◽  
Potential Temperature ◽  
Sensible Heat Flux ◽  
Time Of Day ◽  
Sensible Heat ◽  
Tethered Balloon ◽  
Flux Divergence ◽  
Remotely Piloted Aircraft

Abstract Profiles of the sensible heat flux are key to understanding atmospheric-boundary-layer (ABL) structure and development. Based on temperature profiling by a remotely-piloted aircraft system (RPAS), the Small Unmanned Meteorological Observer (SUMO) platform, during the Boundary Layer Late Afternoon and Sunset Turbulence (BLLAST) field campaign, 108 heat-flux profiles are estimated using a simplified version of the prognostic equation for potential temperature $$\theta $$θ that relates the tendency in $$\theta $$θ to the flux divergence over the time span between two consecutive flights. We validate for the first time RPAS-based heat-flux profiles against a network of 12 ground-based eddy-covariance stations (2–60 m above ground), in addition to a comparison with fluxes from a manned aircraft and a tethered balloon, enabling the detailed investigation of the potential and limitations related to this technique for obtaining fluxes from RPAS platforms. We find that appropriate treatment of horizontal advection is crucial for obtaining realistic flux values, and present correction methods specific to the state of the ABL. Advection from a mesoscale model is also tested as another correction method. The SUMO heat-flux estimates with appropriate corrections compare well with the reference measurements, with differences in the performance depending on the time of day, since the evening period shows the best results (94$$\%$$% within the spread of ground stations), and the afternoon period shows the poorest results (63$$\%$$% within the spread). The diurnal cycle of the heat flux is captured by the SUMO platform for several days, with the flux values from the manned aircraft and tethered balloon coinciding well with those from the SUMO platform.

scholarly journals Estimation of the Latent Heat Flux over Irrigated Short Fescue Grass for Different Fetches

Atmosphere ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 322
Author(s):  
Francesc Castellví ◽  
Pedro Gavilán
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Sensible Heat Flux ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
The Other ◽  
Sensible Heat ◽  
Surface Renewal ◽  
Residual Method ◽  
Flux Footprints

Often in agrometeorology the instrumentation required to estimate turbulent surface fluxes must be installed at sites where fetch is not sufficient for a sector of wind directions. For different integrated flux-footprints (IFFP) thresholds and taking as a reference the half-hourly latent heat fluxes (LE) measured with a large weighing lysimeter (LELys), the eddy covariance (EC) method and two methods based on surface renewal (SR) analysis to estimate LE were tested over short fescue grass. One method combined SR with the flux-gradient (profile) relationship, SR-P method, and the other with the dissipation method, SR-D method. When LE was estimated using traces of air moisture, good performances were obtained using the EC and the SR-P methods for samples with IFFP higher than 85%. However, the closest LE estimates were obtained using the residual method. For IFFP higher than 50%, the residual method combined with the sensible heat flux estimates determined using the SR-P method performed close to LELys and using the SR-D method good estimates were obtained for accumulated LELys. To estimate the sensible heat flux, the SR-D method can be recommended for day-to-day use by farmers because it is friendly and affordable.

scholarly journals Boundary layer characteristics associated with sea breeze circulation over Cochin

MAUSAM ◽  
2021 ◽  
Vol 58 (1) ◽  
pp. 75-86
Author(s):  
HAMZA V ◽  
C. A. BABU
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Drag Coefficient ◽  
Momentum Flux ◽  
Sensible Heat Flux ◽  
Sea Breeze ◽  
Surface Fluxes ◽  
Land Breeze ◽  
Sensible Heat ◽  
Breeze Circulation

Features of sea and land breezes, surface fluxes and drag coefficient over Cochin are studied using more than 300 daily observations of air temperature, wind speed and direction data. The duration and intensity of sea breeze circulation vary with the rain or cloud as it reduces the differential heating. Onset of sea breeze is early in summer season for the near equatorial station compared to winter season. Cessation is almost same for all seasons and is around 1900 hours. The sea breeze circulation is almost westerly and land breeze circulation is almost easterly in all the seasons. It is found that in most of the cases, the temperature and wind speed decreases at the time of onset of sea breeze and turning of wind direction with height becomes counter clockwise (backing) during the transition period from land breeze to sea breeze. In all seasons, the momentum flux is directed downward. High values of momentum flux were found during the presence of sea breeze in pre-monsoon season. Average sensible heat flux is directed upward during the entire period and during nighttime it is almost zero in the winter and monsoon seasons. The intensity of momentum flux decreases during onset and cessation of sea breeze for all the cases. The cold air advection associated with the sea breeze results in the decrease of sensible heat flux at the time of onset of sea breeze. Averaged surface momentum and sensible flux patterns resemble closely to the instantaneous pattern for all the seasons. Generally, sea breeze is stronger than land breeze in all the seasons. Accordingly, the drag coefficient power relationship with wind is different for sea breeze and land breeze circulations.Key words – Sea breeze circulation, Monsoon boundary layer, Surface fluxes, Drag coefficient, Diurnal variation.

scholarly journals Influence of a New Turbulence Regime on the Global Air–Sea Heat Fluxes

2008 ◽  
Vol 21 (22) ◽  
pp. 5925-5941 ◽  
Author(s):  
Erik Sahlée ◽  
Ann-Sofi Smedman ◽  
Anna Rutgersson ◽  
Ulf Högström
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Sensible Heat Flux ◽  
Sensitivity Study ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Turbulence Structure ◽  
Sensible Heat ◽  
Monsoon Period

Abstract Recent research has found that boundary layer turbulence changes its organization as the stratification approaches neutral from the unstable side. When the thermal forcing weakens in combination with wind speed above approximately 10 m s−1, detached eddies are formed in the upper part of the surface layer. These eddies effectively transport drier and colder air from aloft to the surface as they move downward, thereby enhancing the surface fluxes of sensible and latent heat. This effect has been observed over both land and sea; that is, it is not dependent on the nature of the underlying surface. Here the authors perform a sensitivity study of how this reorganization of the turbulence structure influences the global air–sea heat fluxes. Using modified bulk formulations incorporating this effect, the magnitude of the enhancement in a climatic sense was estimated by the use of 40-yr ECMWF Re-Analysis (ERA-40) data in the bulk formulas. It is found that for the 1979–2001 period, the global increase of the latent and sensible heat fluxes over the ice-free oceans is 3.6 and 1.2 W m−2, respectively. These numbers suggest that this effect is of some significance. The results also indicate that the regional and seasonal variability may be large. The largest annual increases are found over the southern oceans between 30° and 60°S where the sensible heat flux increases by 2.3 W m−2 and the latent heat flux by 6.5 W m−2. Ocean areas close to the equator experience almost no increase, whereas the latent heat flux from the Arabian Sea during the monsoon period is enhanced by 11.5 W m−2.

scholarly journals Parameterization of Inversion Breakup in Idealized Valleys. Part I: The Adjustable Model Parameters

2006 ◽  
Vol 45 (4) ◽  
pp. 600-608 ◽  
Author(s):  
N. M. Zoumakis ◽  
G. A. Efstathiou
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Convective Boundary Layer ◽  
Sensible Heat Flux ◽  
Layer Growth ◽  
Heat Fluxes ◽  
Future Research ◽  
Model Parameters ◽  
Sensible Heat ◽  
Convective Boundary

Abstract The factors that affect the atmospheric energy budget approach used in the thermodynamic valley inversion destruction model of Whiteman and McKee are investigated theoretically. The height at which the sinking inversion top meets the rising convective boundary layer to destroy valley inversions can be uniquely determined by the topographic characteristics of the valley and an adjustable model parameter, relating to the fraction of sensible heat flux going to convective boundary layer growth, through a simple parabolic relationship. The time required to break a temperature inversion can be expressed with very good approximation as a simple power-law function of the topographic parameters and the fraction of extraterrestrial solar flux that is partitioned to sensible heat flux in the valley atmosphere. The theoretical estimates compare very favorably to predictions from the bulk thermodynamic model of Whiteman and McKee. A new approach to handle time-dependent sensible heat fluxes is outlined. The paper ends with recommendations for future research.

scholarly journals Large-Eddy Simulation and Single-Column Modeling of Thermally Stratified Wind Turbine Arrays for Fully Developed, Stationary Atmospheric Conditions

2015 ◽  
Vol 32 (6) ◽  
pp. 1144-1162 ◽  
Author(s):  
Adrian Sescu ◽  
Charles Meneveau
Keyword(s):  
Thermal Stratification ◽  
Layer Structure ◽  
Potential Temperature ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Shear Stresses ◽  
Column Model ◽  
Large Eddy ◽  
Single Column ◽  
Single Column Model

AbstractEffects of atmospheric thermal stratification on the asymptotic behavior of very large wind farms are studied using large-eddy simulations (LES) and a single-column model for vertical distributions of horizontally averaged field variables. To facilitate comparisons between LES and column modeling based on Monin–Obukhov similarity theory, the LES are performed under idealized conditions of statistical stationarity in time and fully developed conditions in space. A suite of simulations are performed for different thermal stratification levels and the results are used to evaluate horizontally averaged vertical profiles of velocity, potential temperature, vertical turbulent momentum, and heat flux. Both LES and the model show that the stratification significantly affects the atmospheric boundary layer structure, its height, and the surface fluxes. However, the effects of the wind farm on surface heat fluxes are found to be relatively small in both LES and the single-column model. The surface fluxes are the result of two opposing trends: an increase of mixing in wakes and a decrease in mixing in the region below the turbines due to reduced momentum fluxes there for neutral and unstable cases, or relatively unchanged shear stresses below the turbines in the stable cases. For the considered cases, the balance of these trends yields a slight increase in surface flux magnitude for the stable and near-neutral unstable cases, and a very small decrease in flux magnitude for the strongly unstable cases. Moreover, thermal stratification is found to have a negligible effect on the roughness scale as deduced from the single-column model, consistent with the expectations of separation of scale.

Sign in / Sign up

Export Citation Format

Share Document