scholarly journals 3D Sonar Measurements in Wakes of Ships of Opportunity

2012 ◽  
Vol 29 (6) ◽  
pp. 880-886 ◽  
Author(s):  
Alexander Soloviev ◽  
Christopher Maingot ◽  
Mike Agor ◽  
Lou Nash ◽  
Keith Dixon
Keyword(s):  
Bubble Dynamics ◽  
Three Dimensional ◽  
Small Scale ◽  
Air Bubbles ◽  
Hydrodynamic Models ◽  
Near Surface ◽  
Ship Wake ◽  
Air Bubble ◽  
Quantitative Estimates ◽  
Object Of Study

Abstract The aim of this work is to test the potential capabilities of 3D sonar technology for studying small-scale processes in the near-surface layer of the ocean, using the centerline wake of ships of opportunity as the object of study. The first tests conducted in Tampa Bay, Florida, with the 3D sonar have demonstrated the ability of this technology to observe the shape of the centerline wake in great detail starting from centimeter scale, using air bubbles as a proxy. An advantage of the 3D sonar technology is that it allows quantitative estimates of the ship wake geometry, which presents new opportunities for validation of hydrodynamic models of the ship wake. Three-dimensional sonar is also a potentially useful tool for studies of air-bubble dynamics and turbulence in breaking surface waves.

scholarly journals Geostatistical FDEM inversion: a three-dimensional real case application

2021 ◽  
Author(s):  
Leonardo Azevedo ◽  
João Narciso ◽  
Ellen Van De Vijver
Keyword(s):  
Spatial Distribution ◽  
Physical Properties ◽  
Three Dimensional ◽  
Real Case ◽  
Small Scale ◽  
Inversion Method ◽  
Two Dimensional ◽  
Data Set ◽  
Near Surface ◽  
Direct Observations

<p>The near surface is a complex and often highly heterogeneous system as its current status results from interacting processes of both natural and anthropogenic origin. Effective sustainable management and land use planning, especially in urban environments, demands high-resolution subsurface property models enabling to capture small-scale processes of interest. The modelling methods based only on discrete direct observations from conventional invasive sampling techniques have limitations with respect to capturing the spatial variability of these systems. Near-surface geophysical surveys are emerging as powerful techniques to provide indirect measurements of subsurface properties. Their integration with direct observations has the potential for better predicting the spatial distribution of the subsurface physical properties of interest and capture the heterogeneities of the near-surface systems.</p><p>Within the most common geophysical techniques, frequency-domain electromagnetic (FDEM) induction methods have demonstrated their potential and efficiency to characterize heterogeneous deposits due to their simultaneous sensitivity to electrical conductivity (EC) and magnetic susceptibility (MS). The inverse modelling of FDEM data based on geostatistical techniques allows to go beyond conventional analyses of FDEM data. This geostatistical FDEM inversion method uses stochastic sequential simulation and co-simulation to perturbate the model parameter space and the corresponding FDEM forward model solutions, including both the synthetic FDEM responses and their sensitivity to changes on the physical properties of interest. A stochastic optimization driven by the misfit between true and synthetic FDEM data is applied to iterative towards a final subsurface model. This method not only improve the confidence of the obtained EC and MS inverted models but also allows to quantify the uncertainty related to them. Furthermore, taking into account spatial correlations enables more accurate prediction of the spatial distribution of subsurface properties and a more realistic reconstruction of small-scale spatial variations, even when considering highly heterogeneous near surface systems. Moreover, a main advantage of this iterative geostatistical FDEM inversion method is its ability to flexibly integrate data with different resolution in the same framework.</p><p>In this work, we apply this iterative geostatistical FDEM inversion technique, which has already been successfully demonstrated for one- and two-dimensional applications, to invert a real case FDEM data set in three dimensions. The FDEM survey data set was collected on a site located near Knowlton (Dorset, UK), which is geologically characterized by Cretaceous chalk overlain by Quaternary siliciclastic sand deposits. The subsurface at the site is known to contain several archaeological features, which produces strong local in-phase anomalies in the FDEM survey data. We discuss the particular challenges involved in the three-dimensional application of the inversion method to a real case data set and compare our results against previously obtained ones for one- and two-dimensional approximations.</p>

scholarly journals Horizontal Vortex Tubes near a Simulated Tornado: Three-Dimensional Structure and Kinematics

Atmosphere ◽  
2019 ◽  
Vol 10 (11) ◽  
pp. 716 ◽  
Author(s):  
Oliveira ◽  
Xue ◽  
Roberts ◽  
Wicker ◽  
Yussouf
Keyword(s):  
Wide Spectrum ◽  
Surface Wind ◽  
3D Structure ◽  
Three Dimensional ◽  
Surface Friction ◽  
Radar Data ◽  
Dimensional Structure ◽  
Small Scale ◽  
Near Surface ◽  
Vortex Tubes

Supercell thunderstorms can produce a wide spectrum of vortical structures, ranging from midlevel mesocyclones to small-scale suction vortices within tornadoes. A less documented class of vortices are horizontally-oriented vortex tubes near and/or wrapping about tornadoes, that are observed either visually or in high-resolution Doppler radar data. In this study, an idealized numerical simulation of a tornadic supercell at 100 m grid spacing is used to analyze the three-dimensional (3D) structure and kinematics of horizontal vortices (HVs) that interact with a simulated tornado. Visualizations based on direct volume rendering aided by visual observations of HVs in a real tornado reveal the existence of a complex distribution of 3D vortex tubes surrounding the tornadic flow throughout the simulation. A distinct class of HVs originates in two key regions at the surface: around the base of the tornado and in the rear-flank downdraft (RFD) outflow and are believed to have been generated via surface friction in regions of strong horizontal near-surface wind. HVs around the tornado are produced in the tornado outer circulation and rise abruptly in its periphery, assuming a variety of complex shapes, while HVs to the south-southeast of the tornado, within the RFD outflow, ascend gradually in the updraft.

Three-Dimensional Volume of Fluid Simulations of Air Bubble Dynamics in a Converging Nozzle

2018 ◽  
Author(s):  
Deify Law ◽  
Thomas G. Shepard
Keyword(s):  
High Speed ◽  
Bubble Dynamics ◽  
Liquid Velocity ◽  
Three Dimensional ◽  
Volume Of Fluid ◽  
Ansys Fluent ◽  
Air Bubble ◽  
Vof Model ◽  
Time Trace ◽  
Velocity Information

The present work relates to the dynamics of single bubbles accelerating through a converging nozzle. There are two main aspects to this study. First, this expands upon a previously used two-dimensional model [1] by providing three-dimensional volume of fluid (VOF) simulations that show better agreement with experiments. The VOF model is employed to perform simulations using the commercial computational fluid dynamics (CFD) code ANSYS FLUENT. Second, the present work uses experimental high-speed camera results in conjunction with simulation results to demonstrate bubble time trace and velocity information. Time series of the average liquid velocity at the atomizer exit orifice when the bubble exits as determined via simulation are reported. The passing of a bubble through the nozzle is found to cause a significant fluctuation in the exit velocity that is coupled to the liquid and gas dynamics upstream of the exit.

scholarly journals Study of air bubble dynamics in an air column using CFD

2019 ◽  
Vol 85 ◽  
pp. 02010
Author(s):  
Corina Boncescu ◽  
Lăcrămioara Diana Robescu
Keyword(s):  
Bubble Dynamics ◽  
Biological Process ◽  
Treatment Plant ◽  
Theoretical Data ◽  
Aeration Tank ◽  
Air Bubbles ◽  
Water Mixture ◽  
Air Bubble ◽  
Air Column ◽  
Theoretical Results

The energy used for biological process in a wastewater treatment plant depends on aeration equipment and hydraulic parameters in aeration tank. Gas bubbles flow into bioreactor determines an extra turbulence into the mixture. This paper presents the results obtained using the volume of fluid (VOF) mathematical model to determine the velocities generated by bubbles into an upward flow air-water mixture in a column of water. Also, it was identified vertexes center in the ascending air bubbles movement and the number and the diameter of the bubbles were determined. The theoretical results were compared to experimental and theoretical data from the literature and it was found a good correlation.

Three-Dimensional Study of the Nonrectilinear Trajectory of Air Bubbles Rising in Water

1973 ◽  
Vol 40 (3) ◽  
pp. 650-654 ◽  
Author(s):  
J. Mercier ◽  
A. Lyrio ◽  
R. Forslund
Keyword(s):  
Coordinate System ◽  
Geometric Model ◽  
Three Dimensional ◽  
Air Bubbles ◽  
Air Bubble

A three-dimensional photographic study of the nonrectilinear ascent of an air bubble in water is presented. A geometric model is developed which describes the trajectory in terms of a transformed coordinate system. The parameters of the model which describe the departure from linearity are found to be dependent on the equivalent spherical radius of the bubble.

scholarly journals The quiet-Sun photosphere and chromosphere

2012 ◽  
Vol 370 (1970) ◽  
pp. 3129-3150 ◽  
Author(s):  
Robert J. Rutten
Keyword(s):  
Fine Structure ◽  
Three Dimensional ◽  
Active Regions ◽  
Internal Gravity Waves ◽  
Research Area ◽  
Small Scale ◽  
Closed Field ◽  
Solar Photosphere ◽  
Solar Chromosphere ◽  
Near Surface

The overall structure and the fine structure of the solar photosphere outside active regions are largely understood, except possibly the important roles of a turbulent near-surface dynamo at its bottom, internal gravity waves at its top and small-scale vorticity. Classical one-dimensional static radiation-escape modelling has been replaced by three-dimensional time-dependent magento-hydrodynamic simulations that come closer to reality. The solar chromosphere, in contrast, remains little understood, although its pivotal role in coronal mass and energy loading makes it a principal research area. Its fine structure defines its overall structure, so that hard-to-observe and hard-to-model small-scale dynamical processes are key to understanding. However, both chromospheric observation and chromospheric simulation presently mature towards the required sophistication. Open-field features seem of greater interest than easier-to-see closed-field features.

Extrusion-Based 3D Printing for Pharmaceuticals: Contemporary Research and Applications

2019 ◽  
Vol 24 (42) ◽  
pp. 4991-5008 ◽  
Author(s):  
Mohammed S. Algahtani ◽  
Abdul Aleem Mohammed ◽  
Javed Ahmad
Keyword(s):  
Cosmetic Surgery ◽  
Fused Deposition Modeling ◽  
Personalised Medicine ◽  
Organ Transplant ◽  
Three Dimensional ◽  
Dosage Forms ◽  
Release Profile ◽  
Small Scale ◽  
Drug Release Profile ◽  
Fused Deposition

Three-dimensional printing (3DP) has a significant impact on organ transplant, cosmetic surgery, surgical planning, prosthetics and other medical fields. Recently, 3 DP attracted the attention as a promising method for the production of small-scale drug production. The knowledge expansion about the population differences in metabolism and genetics grows the need for personalised medicine substantially. In personalised medicine, the patient receives a tailored dose and the release profile is based on his pharmacokinetics data. 3 DP is expected to be one of the leading solutions for the personalisation of the drug dispensing. This technology can fabricate a drug-device with complicated geometries and fillings to obtain the needed drug release profile. The extrusionbased 3 DP is the most explored method for investigating the feasibility of the technology to produce a novel dosage form with properties that are difficult to achieve using the conventional industrial methods. Extrusionbased 3 DP is divided into two techniques, the semi-solid extrusion (SSE) and the fused deposition modeling (FDM). This review aims to explain the extrusion principles behind the two techniques and discuss their capabilities to fabricate novel dosage forms. The advantages and limitations observed through the application of SSE and FDM for fabrication of drug dosage forms were discussed in this review. Further exploration and development are required to implement this technology in the healthcare frontline for more effective and personalised treatment.

Thermomechanical Coupling of a Hyper-viscoelastic Truck Tire and a Pavement Layer and its Impact on Three-dimensional Contact Stresses

2021 ◽  
pp. 036119812110171
Author(s):  
Angeli Jayme ◽  
Imad L. Al-Qadi
Keyword(s):  
Contact Stress ◽  
Contact Area ◽  
Three Dimensional ◽  
Interaction Model ◽  
Rolling Resistance ◽  
Contact Stresses ◽  
Thermomechanical Coupling ◽  
Temperature Profiles ◽  
Near Surface ◽  
Truck Tire

A thermomechanical coupling between a hyper-viscoelastic tire and a representative pavement layer was conducted to assess the effect of various temperature profiles on the mechanical behavior of a rolling truck tire. The two deformable bodies, namely the tire and pavement layer, were subjected to steady-state-uniform and non-uniform temperature profiles to identify the significance of considering temperature as a variable in contact-stress prediction. A myriad of ambient, internal air, and pavement-surface conditions were simulated, along with combinations of applied tire load, tire-inflation pressure, and traveling speed. Analogous to winter, the low temperature profiles induced a smaller tire-pavement contact area that resulted in stress localization. On the other hand, under high temperature conditions during the summer, higher tire deformation resulted in lower contact-stress magnitudes owing to an increase in the tire-pavement contact area. In both conditions, vertical and longitudinal contact stresses are impacted, while transverse contact stresses are relatively less affected. This behavior, however, may change under a non-free-rolling condition, such as braking, accelerating, and cornering. By incorporating temperature into the tire-pavement interaction model, changes in the magnitude and distribution of the three-dimensional contact stresses were manifested. This would have a direct implication on the rolling resistance and near-surface behavior of flexible pavements.

scholarly journals Quantification of Measurement and Model Effects in Monopile Foundation Scour Protection Experiments

2021 ◽  
Vol 9 (6) ◽  
pp. 585
Author(s):  
Minghao Wu ◽  
Leen De Vos ◽  
Carlos Emilio Arboleda Chavez ◽  
Vasiliki Stratigaki ◽  
Maximilian Streicher ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Flow Field ◽  
Three Dimensional ◽  
Small Scale ◽  
Maximum Wave Height ◽  
Chaotic Flow ◽  
The Mean ◽  
Scour Protection ◽  
Damage Number ◽  
Measurement Effects

The present work introduces an analysis of the measurement and model effects that exist in monopile scour protection experiments with repeated small scale tests. The damage erosion is calculated using the three dimensional global damage number S3D and subarea damage number S3D,i. Results show that the standard deviation of the global damage number σ(S3D)=0.257 and is approximately 20% of the mean S3D, and the standard deviation of the subarea damage number σ(S3D,i)=0.42 which can be up to 33% of the mean S3D. The irreproducible maximum wave height, chaotic flow field and non-repeatable armour layer construction are regarded as the main reasons for the occurrence of strong model effects. The measurement effects are limited to σ(S3D)=0.039 and σ(S3D,i)=0.083, which are minor compared to the model effects.

scholarly journals Effect of cannulation site on emboli travel during cardiac surgery

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Mira Puthettu ◽  
Stijn Vandenberghe ◽  
Stefanos Demertzis
Keyword(s):  
Cardiac Surgery ◽  
In Vitro Study ◽  
Blood Stream ◽  
Air Bubbles ◽  
Arterial Tree ◽  
Air Bubble ◽  
Cannulation Site ◽  
The Brain

Abstract Background During cardiac surgery, micro-air emboli regularly enter the blood stream and can cause cognitive impairment or stroke. It is not clearly understood whether the most threatening air emboli are generated by the heart-lung machine (HLM) or by the blood-air contact when opening the heart. We performed an in vitro study to assess, for the two sources, air emboli distribution in the arterial tree, especially in the brain region, during cardiac surgery with different cannulation sites. Methods A model of the arterial tree was 3D printed and included in a hydraulic circuit, divided such that flow going to the brain was separated from the rest of the circuit. Air micro-emboli were injected either in the HLM (“ECC Bubbles”) or in the mock left ventricle (“Heart Bubbles”) to simulate the two sources. Emboli distribution was measured with an ultrasonic bubble counter. Five repetitions were performed for each combination of injection site and cannulation site, where air bubble counts and volumes were recorded. Air bubbles were separated in three categories based on size. Results For both injection sites, it was possible to identify statistically significant differences between cannulation sites. For ECC Bubbles, axillary cannulation led to a higher amount of air bubbles in the brain with medium-sized bubbles. For Heart Bubbles, aortic cannulation showed a significantly bigger embolic load in the brain with large bubbles. Conclusions These preliminary in vitro findings showed that air embolic load in the brain may be dependent on the cannulation site, which deserves further in vivo exploration.

Sign in / Sign up

Export Citation Format

Share Document