High, intermediate and low temperature performance appraisal of elastomeric and plastomeric asphalt binders and mixes

2021 ◽  
pp. 009524432110386
Author(s):  
Aboelkasim Diab ◽  
Jorge Pais ◽  
Siyu Chen ◽  
Ankit Gupta ◽  
Xuelian Li ◽  
...  
Keyword(s):  
Low Temperature ◽  
Performance Appraisal ◽  
Permanent Deformation ◽  
Fatigue Cracking ◽  
Intermediate Temperature ◽  
Age Hardening ◽  
Asphalt Binders ◽  
Temperature Performance ◽  
Low Temperature Cracking ◽  
The Impact

This paper is oriented to appraise high, intermediate, and low temperature related performance of elastomeric and plastomeric binders and mixtures in order to evaluate their characteristics at various levels of environmental and loading conditions. Artificial oxidative hardening of asphalt binders and mixes was performed in the laboratory using short- and long-term aging protocols.At the binder level, the elastomers (styrene-butadiene-styrene (SBS) and rubber) and plastomer (ethylene-vinyl acetate (EVA)) materials improved high and intermediate temperature performance indices (G*/sin(δ) and G*.sin(δ), respectively). Interestingly, the aged SBS/bitumen blend had improved low-temperature cracking resistance compared to unaged counterpart. With the progress of oxidative hardening, the plastomer based binder did not show obvious change in the low-temperature cracking susceptibility compared to elastomer-modified binder. Seemingly, in the case of plastomer/bitumen blend, the propensity to low-temperature cracking is to a great extent controlled by the corresponding base bitumen. The plastomer based mixture had improved permanent deformation performance, whereas the elastomers afforded a tangible amelioration for the vulnerability to load and non-load associated cracking. The SBS based mixture showed highest low-temperature fracture energy compared to the EVA based mixture. Despite the determinantal effect of age-hardening to low and intermediate temperature-related cracking of mixes, the results confirmed that the elastomeric materials can retard the impact of aging level on the low temperature and fatigue cracking. Comparision of results was justified by the statistical analysis in order to determine the significance of bituminous material parameters on the measured properties.

scholarly journals Evaluation of Low- and Intermediate-Temperature Performance of Bio Oil-Modified Asphalt Binders

2021 ◽  
Vol 13 (7) ◽  
pp. 4039
Author(s):  
Sara A. Alattieh ◽  
Ghazi G. Al-Khateeb ◽  
Waleed Zeiada
Keyword(s):  
Low Temperature ◽  
Asphalt Binder ◽  
Fatigue Cracking ◽  
Asphalt Binders ◽  
Tensile Stresses ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Bio Oil ◽  
Low Temperature Cracking ◽  
Low Temperature Performance

Fatigue cracking and low-temperature cracking are two major distresses that occur in asphalt pavements. Fatigue cracking is a load-associated distress caused by the tensile stresses at the bottom/top of the asphalt concrete (AC) layer due to repeated traffic loading. On the other hand, low-temperature cracking occurs when tensile stresses built up with in the AC layer at low temperatures exceed the tensile strength of that layer. In this study, the performance of date seeds oil bio-modified asphalt binders (DSO-BMB) is evaluated against fatigue and low-temperature cracking. The DSO-BMBs are prepared using volume ratios of 1.5, 2.5, 3.5, 4.5, and 5.5% date seeds oil-to-asphalt binder. The base asphalt binder used in the study is a 60/70-penetration grade with a Superpave performance grade (PG) of PG 64–16. The dynamic shear rheometer (DSR) standard test was used to assess the fatigue performance of the bio-modified binders (BMBs), while the bending beam rheometer (BBR) test was used to test the BMBs for low-temperature performance. In addition, the DSR linear amplitude sweep (LAS) test was used to evaluate the fatigue tolerance behavior of the DSO-BMBs. The analysis and results of the study showed that the bio-oil enhanced the low-temperature performance. The low PG grade improved from −16 °C for the control asphalt binder to −28 °C for the BMB. Additionally, the fatigue resistance of the BMBs was improved as illustrated by the damage–characteristic curves of the modified asphalt binders from the visco-elastic continuum damage (VECD) analysis and the increase in the number of cycles to fatigue failure (Nf).

AYMA: Mechanistic Probabilistic System To Evaluate Flexible Pavement Performance

1998 ◽  
Vol 1629 (1) ◽  
pp. 137-148 ◽  
Author(s):  
Manuel Ayres ◽  
Matthew W. Witczak
Keyword(s):  
Low Temperature ◽  
Mechanistic Model ◽  
Permanent Deformation ◽  
Probabilistic Approach ◽  
Fatigue Cracking ◽  
Flexible Pavement ◽  
Analysis And Design ◽  
Mechanistic Approach ◽  
Low Temperature Cracking ◽  
User Friendly

A new rational mechanistic model for analysis and design of flexible pavement systems has been developed. Furthermore, a fundamental probabilistic approach was incorporated into this system to account for the uncertainty of material and environmental conditions. The system was integrated in a user-friendly Windows program with a variety of user-selected options that include widely used models and those recently developed in the Strategic Highway Research Program project. Three basic types of distress can be investigated separately or all together, including fatigue cracking, permanent deformation, and low-temperature cracking. The mechanistic approach makes use of the JULEA layered elastic analysis program to obtain pavement response. The system provides optional deterministic and probabilistic solutions, accounts for aging and temperature effects over the asphalt materials, variable interface friction, multiple wheel loads, and user-selected locations for analysis. Tabular and graphical results provide expected distress values for each month as well as their variability, probability of failure, and assessment of the overall reliability of the pavement relative to each type of distress for a user-selected failure criterion. Only the load-associated module of AYMA is presented; a separate work describes the low-temperature cracking analysis.

scholarly journals Effect of Recycled Shell Waste as a Modifier on the High- and Low-Temperature Rheological Properties of Asphalt

2021 ◽  
Vol 13 (18) ◽  
pp. 10271
Author(s):  
Yuchen Guo ◽  
Xuancang Wang ◽  
Guanyu Ji ◽  
Yi Zhang ◽  
Hao Su ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Rheological Properties ◽  
Low Temperatures ◽  
High Speed ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Temperature Performance

The deteriorating ecological environment and the concept of sustainable development have highlighted the importance of waste reuse. This article investigates the performance changes resulting from the incorporation of shellac into asphalt binders. Seashell powder-modified asphalt was prepared with 5%, 10%, and 15% admixture using the high-speed shear method. The microstructure of the seashell powder was observed by scanning electron microscope test (SEM); the physical-phase analysis of the seashell powder was carried out using an X-ray diffraction (XRD) test; the surface characteristics and pore structure of shellac were analyzed by the specific surface area Brunauer-Emmett-Teller (BET) test; and Fourier infrared spectroscopy (FTIR) qualitatively analyzed the composition and changes of functional groups of seashell powder-modified asphalt. The conventional performance index of seashell powder asphalt was analyzed by penetration, softening point, and ductility (5 °C) tests; the effect of seashell powder on asphalt binder was studied using a dynamic shear rheometer (DSR) and bending beam rheometer (BBR) at high and low temperatures, respectively. The results indicate the following: seashell powder is a coarse, porous, and angular CaCO3 bio-material; seashell powder and the asphalt binder represent a stable physical mixture of modified properties; seashell powder improves the consistency, hardness, and high-temperature performance of the asphalt binder but weakens the low-temperature performance of it; seashell powder enhances the elasticity, recovery performance, and permanent deformation resistance of asphalt binders and improves high-temperature rheological properties; finally, seashell powder has a minimal effect on the crack resistance of asphalt binders at very low temperatures. In summary, the use of waste seashells for recycling as bio-modifiers for asphalt binders is a practical approach.

scholarly journals Towards the Use of Waste Pig Fat as a Novel Potential Bio-Based Rejuvenator for Recycled Asphalt Pavement

Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 1002
Author(s):  
Nader Nciri ◽  
Taesub Shin ◽  
Namho Kim ◽  
Arnaud Caron ◽  
Hanen Ben Ismail ◽  
...  
Keyword(s):  
Low Temperature ◽  
Asphalt Pavement ◽  
Fatigue Cracking ◽  
Recycled Asphalt ◽  
Excellent Thermal Stability ◽  
Temperature Performance ◽  
Aged Asphalt ◽  
Ft Ir ◽  
Low Temperature Performance ◽  
The Impact

This article presents a novel potential bio-based rejuvenator derived from waste pig fat (WPF) for use in recycled asphalt applications. To achieve this purpose, the impact of different doses waste pig fat (e.g., 0, 3, 6, and 9 wt.% WPF) on the reclaimed asphalt pavement binder (RAP-B) performance is investigated. The unmodified and WPF-modified asphalts are characterized by means of Fourier-transform infrared spectroscopy (FT-IR), thin-layer chromatography–flame ionization detection (TLC-FID), scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). Physico-rheological properties of asphalt blends are assessed through Brookfield viscometer, softening point, penetration, and dynamic shear rheometer (DSR) tests. TLC-FID data highlighted that incremental WPF addition into RAP-B restored its original balance maltenes-to-asphaltenes ratio; finding which was supported by FT-IR analysis. SEM disclosed that WPF has a great compatibility with the aged asphalt. AFM observations showed that grease treatment induced a decline in surface roughness (i.e., bee structures) and a rise in friction force (i.e., para-phase dimension) of RAP binder. TGA/DSC studies revealed that the bio-modifier not only possesses an excellent thermal stability but also can substantially enhance the binder low-temperature performance. Empirical and DSR tests demonstrated that WPF improved the low-temperature performance grade of RAP-B, reduced its mixing and compaction temperatures, and noticeably boosted its fatigue cracking resistance. The rejuvenation of aged asphalt employing WPF is feasible and can be an ideal approach to recycle both of RAP and waste pig fats.

Evaluation of Carbon Nanotubes Asphalt Modification Using the Superpave Criteria

2021 ◽  
Vol 902 ◽  
pp. 135-143
Author(s):  
Mohammad Ali Khasawneh ◽  
Khalid Ghuzlan ◽  
Nada Bani Melhem
Keyword(s):  
Carbon Nanotubes ◽  
Low Temperature ◽  
Rheological Properties ◽  
Asphalt Binder ◽  
Fatigue Cracking ◽  
Asphalt Binders ◽  
Asphalt Pavements ◽  
Low Temperature Cracking ◽  
Asphalt Modification ◽  
Rotational Viscosity

Rutting, fatigue cracking and low temperature cracking are the most important distresses in asphalt pavements as a result of changes in rheological properties of asphalt binder. Many types of modifiers were used to enhance asphalt behavior at both low and high temperatures. In this study, carbon nanotubes (CNT) were used as one of many nanomaterials that take a large attention in the latest research related to asphalt modification against different types of distresses. Effect of CNT on rheological properties of asphalt binder was investigated by testing unmodified and CNT modified asphalt binders using two of Superpave devices: Dynamic Shear Rheometer (DSR) and Bending Beam Rheometer (BBR). Penetration, softening point, flash point and rotational viscosity (RV) tests were carried out as well. CNT was added in 0.1%, 0.5% and 1% by weight of asphalt binder. It was found that adding CNT in 0.5% and 1% increase stiffness of asphalt and consequently asphalt pavement rutting resistance. On the other hand, this increase in stiffness affected pavement behavior adversely which is not desirable for fatigue and low temperature cracking. However, Superpave specifications were still satisfied and asphalt binder’s relaxation properties were improved upon CNT modification. It was eventually found that 0.5% of CNT is the optimum percentage for the best performance.

Influence Analysis of Performance on Sasobit Warm Mix Asphalt with Salinity

2014 ◽  
Vol 490-491 ◽  
pp. 138-141
Author(s):  
Kun Wang ◽  
Jing Ya Chen ◽  
Xiang Qu
Keyword(s):  
Low Temperature ◽  
Environmental Benefits ◽  
Fatigue Performance ◽  
Test Results ◽  
Temperature Performance ◽  
Cracking Performance ◽  
Low Temperature Cracking ◽  
Short And Long Term ◽  
Analysis Of Performance

Sasobit warm mix drainage asphalt pavement has become increasingly popular due to its environmental benefits and comfortable using effect. However, test results show that its low-temperature and anti-fatigue performance have a certain degree of reduced. To improve the performance of asphalt four different doses (1%, 3%, 5% and 7%) of salt are added to the Sasobit asphalt. Laboratory tests were used to simulate short and long term aging asphalt in the process of construction and using pavement. A series of binder tests including bending beam rheometer (BBR), dynamic shear rheometer (DSR) and Brookfield viscosity tests were conducted. Results show an increase of rutting performance for warm mix binders with Sasobit while asphalt with salt has similar high temperature performance to original asphalt. Unlike Sasobit which has a decrease of cracking performance for asphalt at low-temperature, salinity can greatly improve the Low-temperature performance. And the low-temperature cracking performance and anti-fatigue performance presents a tendency of climbing up first and then declining with the increase of salinity. The figure of viscosity-temperature curve shows that the optimum of salinity is 5%.Further more, asphalt with Sasobit and salt can gain better performance and same mixing and compaction effect in lower 20°C than hot mix asphalt without it.

Effect of Hydrated Lime on Long-Term Oxidative Aging Characteristics of Asphalt

2002 ◽  
Vol 1810 (1) ◽  
pp. 17-24 ◽  
Author(s):  
Shin-Che Huang ◽  
J. Claine Petersen ◽  
Raymond Robertson ◽  
Jan F. Branthaver
Keyword(s):  
Phase Angle ◽  
Fatigue Cracking ◽  
Hydrated Lime ◽  
Age Hardening ◽  
Asphalt Binders ◽  
Asphalt Pavements ◽  
Initial Stiffness ◽  
Oxidative Aging ◽  
Useful Lifetime

An experiment involving neat asphalts AAD-1, ABD, and their mixtures with two different grades of hydrated lime was conducted to investigate the effect of lime on the long-term aging characteristics of asphalt binders. Rheological properties of unaged and aged asphalt-lime mixtures were measured with a dynamic shear rheometer at 25°C (77°F) and 60°C (140°F). The addition of hydrated lime to one asphalt (AAD-1) effectively reduced oxidative age hardening. In addition, the phase angle reached the same value as aging time reached after approximately 800 h at 60°C in the pressure-aging vessel for AAD-1 and its mixtures with lime. After 800 h of aging, the phase angle was greater for the limetreated asphalt than for the untreated asphalt, and it continued to decrease at a slower rate. This result indicates that the addition of lime to this asphalt increases the initial stiffness of the binder, but, more importantly, it preserves elasticity during long-term oxidative aging. Thus, for this asphalt, at a level of oxidation typical of pavements, limetreated and untreated asphalts arrived at the same viscosity with time, but the lime-treated asphalt had better viscous flow properties than the untreated asphalt. It could then be predicted that the aged, lime-treated asphalt would be more resistant to fatigue cracking. The other asphalt tested (ABD) did not exhibit substantial effects of lime on the rate of oxidative age hardening. This highly compatible, low-asphaltene asphalt is not typical of most paving asphalts. Because hydrated lime has been shown to reduce oxidative age hardening both in the laboratory and during the first few years in the pavement, adding hydrated lime should extend the useful lifetime of most asphalt pavements.

Effect of Crumb Rubber Modifier on Pavement Performance of Wearing Course Asphalt Mixture

2010 ◽  
Vol 168-170 ◽  
pp. 1145-1148 ◽  
Author(s):  
Xin Qiu ◽  
Lan Yun Chen ◽  
Liang Xue
Keyword(s):  
Low Temperature ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Moisture Damage ◽  
Crumb Rubber ◽  
Total Weight ◽  
Pavement Performance ◽  
Wet Process ◽  
Low Temperature Cracking ◽  
Improved Performance

The paper investigates the effects of different concentrations of crumb rubber (CR) on the pavement performance of the conventional penetration-grade 80/100 bitumen and the dense-graded wearing course asphalt mixture (AC16). A wet process and 0.6mm size CR were used and the control variables included three types of CR of concentrations 5%,10% and 15% by total weight of binder. The evaluations were twofold. Firstly, a comparison of the basic and rheological properties of those modified and unmodified binders was conducted. Secondly, a comparison of the resistance to moisture damage, low temperature cracking and permanent deformation of the AC16 and CR modified AC16 was performed. The results show that all the CR modified binders and mixtures are found to have improved performance as evaluated by a series of laboratory tests. In addition, among three CR concentrations, AC16 modified with 10%CR by total weight of binder exhibits the most satisfactory performance properties with respect to the resistance to moisture damage, permanent deformation and low temperature cracking.

Research on Basalt Fiber Asphalt Concrete's Low Temperature Performance

2014 ◽  
Vol 505-506 ◽  
pp. 35-38 ◽  
Author(s):  
Chun Mei Gao ◽  
Shuo Han ◽  
Shuang Chen ◽  
He Li
Keyword(s):  
Low Temperature ◽  
Asphalt Concrete ◽  
Failure Strain ◽  
Basalt Fiber ◽  
Test Method ◽  
Temperature Performance ◽  
Low Temperature Cracking ◽  
Indirect Tensile ◽  
Low Temperature Performance ◽  
Temperature Damage

Conduct experimental study on low temperature performance about asphalt concrete with 6mm basalt fiber and without basalt, 6mm fibers whose dosage is 0.12%0.15% and 0.17%, test method is the indirect tensile test,test temperature is-10±0.5°C. The results show that basalt fiber improved the strength and failure strain of asphalt concrete in low temperature damage, reduced the failure stiffness,in which the maximum increased value of breaking strength is 3.41%, the maximum increased value of failure strain is 38.83%,and the maximum reduced value of failure stiffness is 25.52%,obviously improved low temperature cracking resistance of asphalt concrete;for low temperature performance, the optimum amount of value about 6mm basalt fiber is 0.15% .

Sign in / Sign up

Export Citation Format

Share Document