Sliding mode observer based hysteresis compensation control for piezoelectric stacks

2020 ◽  
Vol 42 (14) ◽  
pp. 2760-2770
Author(s):  
Jiaming Hu ◽  
Xiaojin Zhu ◽  
Yubin Fang ◽  
Zhiyuan Gao ◽  
Yijia Zhou
Keyword(s):  
Sliding Mode ◽  
Piezoelectric Materials ◽  
External Disturbance ◽  
Linear Matrix ◽  
Observation Error ◽  
Hysteresis Compensation ◽  
Compensation Control ◽  
Hysteretic Effect ◽  
Practical Engineering ◽  
Piezoelectric Stacks

Piezoelectric stacks (PS) are wildly used as actuator mechanism for precise instrument in practical engineering. Nevertheless, hysteretic effect that is carried by the piezoelectric materials can degrade the control performance dramatically. For the purpose of improving the control precision, the problem of hysteresis compensation control for PS system is investigated in this paper. First, in order to compensate the hysteretic effect, two kinds of observers are proposed. The design of the observers has considered external disturbance and the creep effect in PS system. By utilizing Lyapunov function and linear matrix inequalities (LMI) technique, the observers can asymptotically estimate the hysteretic output with [Formula: see text] performance. Second, a hysteresis-compensation based back-stepping controller is established. The design of the controller has considered the observation error, and it has a certain robustness. At last, numerical and experimental simulations are carried out to verify the effectiveness of the proposed methods.

A linear matrix inequality–based proportional-derivative sliding mode control tuning method in robotic systems subjected to external disturbance

2020 ◽  
Vol 26 (23-24) ◽  
pp. 2297-2315
Author(s):  
Valiollah Ghaffari
Keyword(s):  
Sliding Mode Control ◽  
Linear Matrix Inequality ◽  
Sliding Mode ◽  
Robot Manipulator ◽  
External Disturbance ◽  
Inequality Constraints ◽  
Linear Matrix ◽  
Matrix Inequality ◽  
Tuning Method ◽  
Mode Control

The proportional-derivative sliding-mode control will be designed and tuned in the trajectory tracking of a robot manipulator which operates on uncertain dynamic environments. For achieving these goals, first, a linear matrix inequality–based framework is suggested to design a robust proportional-derivative sliding-mode control in the presence of external disturbances. Next, the parameters of the proportional-derivative sliding-mode control law will be tuned via another minimization problem subjected to some linear matrix inequality constraints. Thus, the controller parameters can be automatically updated via the solution of the optimization problem. The results are successfully used in the robot manipulator with considering two reference paths and some different loads. The simulation results show the effectiveness of the proposed method in comparison with the same technique.

scholarly journals Observer-Based Robust Passive Control for a Class of Uncertain Neutral Systems: An Integral Sliding Mode Approach

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Ruiping Xu ◽  
Zhen Liu ◽  
Cunchen Gao ◽  
Huimin Xiao
Keyword(s):  
Passive Control ◽  
Sliding Mode ◽  
External Disturbance ◽  
The State ◽  
Linear Matrix ◽  
Neutral Systems ◽  
State Estimate ◽  
Integral Sliding Mode ◽  
Time Varying Delay ◽  
System States

The problem of integral sliding mode control (ISMC) with passivity is investigated for a class of uncertain neutral systems with time-varying delay (NTSTD) and external disturbance. The system states are unavailable. An ISMC strategy is proposed based on the state estimate. By employing a novel sliding functional, a new sufficient criterion of robust asymptotic stability and passivity for both the error system and the sliding mode (SM) dynamic system is derived via linear matrix inequality (LMI) technique. Then, a SM controller is synthesized to guarantee the reachability of the sliding surface predefined in the state estimate space. Finally, a numerical example shows the feasibility and superiority of the obtained result.

scholarly journals Composite Compensation Control of Robotic System Subject to External Disturbance and Various Actuator Faults

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Hao Sheng ◽  
Xia Liu
Keyword(s):  
Fault Tolerant ◽  
Sliding Mode ◽  
External Disturbance ◽  
Robotic System ◽  
Sliding Mode Controller ◽  
Actuator Faults ◽  
Compensation Control ◽  
Control Scheme ◽  
Compensation Error ◽  
Fault Compensation

This paper studies the problems of external disturbance and various actuator faults in a nonlinear robotic system. A composite compensation control scheme consisting of adaptive sliding mode controller and observer-based fault-tolerant controller is proposed. First, a sliding mode controller is designed to suppress the external disturbance, and an adaptive law is employed to estimate the bound of the disturbance. Next, a nonlinear observer is designed to estimate the actuator faults, and a fault-tolerant controller is obtained based on the observer. Finally, the composite compensation control scheme is obtained to simultaneously compensate the external disturbance and various actuator faults. It is proved by Lyapunov function that the disturbance compensation error and fault compensation error can converge to zero in finite time. The theoretical results are verified by simulations. Compared to the conventional fault reconstruction scheme, the proposed control scheme can compensate the disturbance while dealing with various actuator faults. The fault compensation accuracy is higher, and the fault error convergence rate is faster. Moreover, the robot can track the desired position trajectory more accurately and quickly.

scholarly journals Reaction Wheel Installation Deviation Compensation for Overactuated Spacecraft with Finite-Time Attitude Control

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Aihua Zhang ◽  
Jianfei Ni ◽  
Hamid Reza Karimi
Keyword(s):  
Finite Time ◽  
Attitude Control ◽  
Sliding Mode ◽  
External Disturbance ◽  
Control Technique ◽  
Adaptive Sliding Mode Control ◽  
Reaction Wheel ◽  
Compensation Control ◽  
Attitude Tracking ◽  
Attitude Tracking Control

A novel attitude tracking control scheme is presented for overactuated spacecraft to address the attitude stabilization problem in presence of reaction wheel installation deviation, external disturbance and uncertain mass of moment inertia. An adaptive sliding mode control technique is proposed to track the uncertainty. A Lyapunov-based analysis shows that the compensation control law can guarantee that the desired attitude trajectories are followed in finite-time. The key feature of the proposed control strategy is that it globally asymptotically stabilizes the system, even in the presence of reaction wheel installation deviation, external disturbances, and uncertain mass of moment inertia. The attitude track performance using the proposed finite-time compensation control is evaluated through a numerical example.

scholarly journals H∞ Robust T-S Fuzzy Design for Uncertain Nonlinear Systems with State Delays Based on Sliding Mode Control

2010 ◽  
Vol 5 (4) ◽  
pp. 592 ◽  
Author(s):  
Xizheng Zhang ◽  
Yaonan Wang ◽  
Xiaofang Yuan
Keyword(s):  
Nonlinear Systems ◽  
Sliding Mode Control ◽  
Sliding Mode ◽  
External Disturbance ◽  
Disturbance Attenuation ◽  
Linear Matrix ◽  
Parameter Uncertainties ◽  
Mode Control ◽  
Disturbance Attenuation Level ◽  
Takagi Sugeno

This paper presents the fuzzy design of sliding mode control (SMC) for nonlinear systems with state delay, which can be represented by a Takagi-Sugeno (TS) model with uncertainties. There exist the parameter uncertainties in both the state and input matrices, as well as the unmatched external disturbance. The key feature of this work is the integration of SMC method with H∞ technique such that the robust asymptotically stability with a prescribed disturbance attenuation level γ can be achieved. A sufficient condition for the existence of the desired SMC is obtained by solving a set of linear matrix inequalities (LMIs). The reachability of the specified switching surface is proven. Simulation results show the validity of the proposed method.

scholarly journals Robust Position Control of a Two-Sided 1-DoF Impacting Mechanical Oscillator Subject to an External Persistent Disturbance by Means of a State-Feedback Controller

Complexity ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
Firas Turki ◽  
Hassène Gritli ◽  
Safya Belghith
Keyword(s):  
State Feedback ◽  
Position Control ◽  
External Disturbance ◽  
Feedback Controller ◽  
Linear Matrix ◽  
Stability Conditions ◽  
Mechanical Oscillator ◽  
Impact Oscillator ◽  
State Feedback Controller ◽  
The Impact

This paper proposes a state-feedback controller using the linear matrix inequality (LMI) approach for the robust position control of a 1-DoF, periodically forced, impact mechanical oscillator subject to asymmetric two-sided rigid end-stops. The periodic forcing input is considered as a persistent external disturbance. The motion of the impacting oscillator is modeled by an impulsive hybrid dynamics. Thus, the control problem of the impact oscillator is recast as a problem of the robust control of such disturbed impulsive hybrid system. To synthesize stability conditions, we introduce the S-procedure and the Finsler lemmas by only considering the region within which the state evolves. We show that the stability conditions are first expressed in terms of bilinear matrix inequalities (BMIs). Using some technical lemmas, we convert these BMIs into LMIs. Finally, some numerical results and simulations are given. We show the effectiveness of the designed state-feedback controller in the robust stabilization of the position of the impact mechanical oscillator under the disturbance.

scholarly journals Robust Tracker of Hybrid Microgrids by the Invariant-Ellipsoid Set

Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1794
Author(s):  
Hilmy Awad ◽  
Ehab H. E. Bayoumi ◽  
Hisham M. Soliman ◽  
Michele De Santis
Keyword(s):  
Sliding Mode ◽  
Tracking Error ◽  
Nonlinear Dynamical System ◽  
Sufficient Conditions ◽  
Linear Matrix ◽  
Nonlinear Dynamical ◽  
Load Variations ◽  
Invariant Ellipsoid ◽  
Steady State Responses ◽  
Linearized Model

This paper introduces a new ellipsoidal-based tracker design to control a grid-connected hybrid direct current/alternating current (DC/AC) microgrid (MG). The proposed controller is robust against both parameters and load variations. The studied hybrid MG is modelled as a nonlinear dynamical system. A linearized model around an operating point is developed. The parameter changes are modelled as norm-bounded uncertainties. We apply the new extended version of the attractive (or invariant) ellipsoid for this tracking problem. Convex optimization is used to obtain the region’s minimal size where the tracking error between the state trajectories and the reference states converges. The sufficient conditions for stability are derived and solved based on linear matrix inequalities (LMIs). The proposed controller’s validity is shown via simulating the hybrid MG with various operational scenarios. In each scenario, the performance of the controller is compared with a recently proposed sliding mode controller. The comparison clearly illustrates the superiority of the developed controller in terms of transient and steady-state responses.

scholarly journals Control of an IPMC Soft Actuator Using Adaptive Full-Order Recursive Terminal Sliding Mode

Actuators ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 33
Author(s):  
Romina Zarrabi Ekbatani ◽  
Ke Shao ◽  
Jasim Khawwaf ◽  
Hai Wang ◽  
Jinchuan Zheng ◽  
...  
Keyword(s):  
Sliding Mode ◽  
External Disturbance ◽  
Tracking Error ◽  
Working Environment ◽  
Parametric Uncertainties ◽  
Metal Composite ◽  
External Disturbances ◽  
Terminal Sliding Mode ◽  
Positioning Accuracy ◽  
Soft Actuator

The ionic polymer metal composite (IPMC) actuator is a kind of soft actuator that can work for underwater applications. However, IPMC actuator control suffers from high nonlinearity due to the existence of inherent creep and hysteresis phenomena. Furthermore, for underwater applications, they are highly exposed to parametric uncertainties and external disturbances due to the inherent characteristics and working environment. Those factors significantly affect the positioning accuracy and reliability of IPMC actuators. Hence, feedback control techniques are vital in the control of IPMC actuators for suppressing the system uncertainty and external disturbance. In this paper, for the first time an adaptive full-order recursive terminal sliding-mode (AFORTSM) controller is proposed for the IPMC actuator to enhance the positioning accuracy and robustness against parametric uncertainties and external disturbances. The proposed controller incorporates an adaptive algorithm with terminal sliding mode method to release the need for any prerequisite bound of the disturbance. In addition, stability analysis proves that it can guarantee the tracking error to converge to zero in finite time in the presence of uncertainty and disturbance. Experiments are carried out on the IPMC actuator to verify the practical effectiveness of the AFORTSM controller in comparison with a conventional nonsingular terminal sliding mode (NTSM) controller in terms of smaller tracking error and faster disturbance rejection.

Integral terminal sliding-mode robust vibration control of large space intelligent truss structures using a disturbance observer

2021 ◽  
pp. 095441002110290
Author(s):  
Dalong Tian ◽  
Jianguo Guo
Keyword(s):  
Robust Control ◽  
Forced Vibration ◽  
Disturbance Observer ◽  
Sliding Mode ◽  
External Disturbance ◽  
Truss Structures ◽  
Model Parameters ◽  
Large Space ◽  
Terminal Sliding Mode ◽  
Piezoelectric Stack Actuator

This study aims to develop an advanced integral terminal sliding-mode robust control method using a disturbance observer (DO) to suppress the forced vibration of a large space intelligent truss structure (LSITS). First, the dynamics of the electromechanical coupling of the piezoelectric stack actuator and the LSITS, based on finite element and Lagrangian methods, are established. Subsequently, to constrict the vibration of the structure, a novel integral terminal sliding-mode control (ITSMC) law for the DO is used to estimate the parameter perturbation of the LSITS based on a continuous external disturbance. Simulation results show that, under a forced vibration and compared with the ITSMC system without a DO, the displacement amplitude of the ITSMC system with the DO is effectively reduced. In the case where the model parameters of the LSITS deviate by ±50%, and an unknown continuous external disturbance exists, the control system with the DO can adequately attenuate the structural vibration and realize robust control. Concurrently, the voltage of the employed piezoelectric stack actuator is reduced, and voltage jitter is alleviated.

Sign in / Sign up

Export Citation Format

Share Document