Influence of plunge depth during friction stir welding of aluminum pipes

2020 ◽  
pp. 095440542094975
Author(s):  
Md Perwej Iqbal ◽  
Ranjan Kumar Vishwakarma ◽  
Surjya K Pal ◽  
Parthasarathi Mandal
Keyword(s):  
Friction Stir Welding ◽  
Base Material ◽  
Fusion Welding ◽  
Influence Of Process Parameters ◽  
Friction Stir ◽  
Lack Of Fusion ◽  
Slag Inclusions ◽  
Key Issues ◽  
Physical Responses ◽  
Root Crack

This study focuses on the application of friction stir welding (FSW) process for joining of pipes. It addresses key issues associated with fusion welding techniques, such as lack of fusion, over penetration, slag inclusions, root crack, undercut root gap, and thermal distortion. The influence of process parameters on the physical properties during FSW of aluminum pipes has been studied, which allows selecting an optimum combination of parameters for achieving superior welds. Physical responses such as variation in axial force, torque, temperature, and power have been analyzed. Tensile test of the joints fabricated shows a maximum of ∼90% joint strength efficiency with respect to the base material. The peak temperature or heat input is found to be increasing during FSW, which creates a larger grain size in the stir zone of the joints, resulting in the higher hardness of the joints.

scholarly journals Analysis of the Oscillation Behavior of Hybrid Aluminum/Steel Joints Realized by Ultrasound Enhanced Friction Stir Welding

Metals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1079
Author(s):  
Marco Thomä ◽  
Andreas Gester ◽  
Guntram Wagner ◽  
Marco Fritzsche
Keyword(s):  
Friction Stir Welding ◽  
Base Material ◽  
Fusion Welding ◽  
Laser Vibrometer ◽  
Particle Volume ◽  
Dissimilar Joints ◽  
Additional Energy ◽  
Power Ultrasound ◽  
Friction Stir ◽  
Ultrasound Enhancement

Friction stir welding (FSW) is an innovative solid-state joining process, which is suitable for joining dissimilar materials with strongly differing physical and chemical properties such as aluminum and steel. Where other joining methods such as fusion welding struggle to achieve appropriate joint strengths due to the excessive formation of brittle aluminum-rich intermetallic phases (IMP), FSW joints of aluminum and steel only show small layers of IMP, thus, sufficient tensile strengths in proximity to the maximum tensile strength of the weaker aluminum base material can be reached. With the aim to optimize the mechanical and microstructural properties of such dissimilar joints for widening the field for possible industrial applications, several hybrid friction stir welding methods have been developed which include an additional energy input, whereas the ultrasound enhancement (USE-FSW) is one of the most promising. The current work was carried out on AA6061/DC04 joints which were successfully friction stir welded with and without ultrasound support, in respect to the influence of varying the ultrasound transmission side. The functionality of the USE-FSW setup could be verified by multi point laser vibrometer measurements. Additionally, a higher proportion of transversal oscillation for the transmission of power ultrasound into aluminum could be detected using a scanning vibrometer. In comparison to the conventionally friction stir welded joints the ultrasound enhancement led to an avoidance of weld defects and an increase of the steel particle volume in the stir zone. The joint produced with power ultrasound transmission via aluminum resulted in a more uniform interface.

scholarly journals Influence of Process Parameters on Structure and Mechanical Properties of Joints Produced by Electromagnetic Forming and Friction Stir Welding

2008 ◽  
Vol 43 ◽  
pp. 47-56 ◽  
Author(s):  
Pablo Barreiro ◽  
Volker Schulze ◽  
Detlef Löhe
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Tensile Tests ◽  
Fusion Welding ◽  
Pulsed Magnetic Fields ◽  
Influence Of Process Parameters ◽  
Lightweight Structures ◽  
Friction Stir ◽  
Typical Strain ◽  
Aluminum Profiles

Electromagnetic compression of tubular profiles with high electrical conductivity is an innovative joining process for lightweight structures. The components are joint using pulsed magnetic fields which apply radial pressures of up to 200 MPa to tubular work pieces causing a symmetric reduction of the diameter with typical strain rates of about 104 sec-1. Since there is no contact between the components to be joined and the joining machine, any damage of component’s surface can be avoided. Friction stir welding (FSW) is a relatively new solid state joining technique and has been extensively developed for aluminum, magnesium, copper and titanium alloys as well as steels. The primal advantages of the process in comparison to conventional fusion welding are better mechanical properties, low residual stresses and distortion, and reduced occurrence of defects. In the present article, the influence of process and material parameters on the joint’s characteristics, material’s microstructure and the mechanical properties of electromagnetic compressed joints and friction stir welds using reinforced aluminum profiles is analyzed. The strength of the joint is determined by tensile tests. Finally, possible improvements of both techniques are outlined.

Study of the Key Issues of Friction Stir Welding of Titanium Alloy

2010 ◽  
Vol 638-642 ◽  
pp. 1185-1190 ◽  
Author(s):  
Hui Jie Liu ◽  
Li Zhou ◽  
Yong Xian Huang ◽  
Qi Wei Liu
Keyword(s):  
Titanium Alloy ◽  
Friction Stir Welding ◽  
Melting Point ◽  
Titanium Alloys ◽  
Welding Process ◽  
High Strength ◽  
Liquid Cooling ◽  
Friction Stir ◽  
Key Issues ◽  
Aluminum And Magnesium Alloys

As a new solid-state welding process, friction stir welding (FSW) has been successfully used for joining low melting point materials such as aluminum and magnesium alloys, but the FSW of high melting point materials such as steels and titanium alloys is still difficult to carry out because of their strict requirements for the FSW tool. Especially for the FSW of titanium alloys, some key technological issues need to solve further. In order to accomplish the FSW of titanium alloys, a specially designed tool system was made. The system was composed of W-Re pin tool, liquid cooling holder and shielding gas shroud. Prior to FSW, the Ti-6Al-4V alloy plates were thermo-hydrogen processed to reduce the deformation resistance and tool wear during the FSW. Based on this, the thermo-hydrogen processed Ti-6Al-4V alloy with different hydrogen content was friction stir welded, and the microstructural characterizations and mechanical properties of the joints were studied. Experimental results showed that the designed tool system can fulfill the requirements of the FSW of titanium alloys, and excellent weld formation and high-strength joint have been obtained from the titanium alloy plates.

Influence of Friction Stir Welding Process on the Weld Formation and Tensile Strength of Titanium and Aluminum Dissimilar Alloys Welded Joint

2011 ◽  
Vol 189-193 ◽  
pp. 3266-3269 ◽  
Author(s):  
Yu Hua Chen ◽  
Peng Wei ◽  
Quan Ni ◽  
Li Ming Ke
Keyword(s):  
Tensile Strength ◽  
Friction Stir Welding ◽  
Cross Section ◽  
Welded Joint ◽  
Welding Process ◽  
Dissimilar Materials ◽  
Influence Of Process Parameters ◽  
Friction Stir ◽  
Dissimilar Alloys ◽  
Titanium Aluminum

Titanium alloy TC1 and Aluminum alloy LF6 were jointed by friction stir welding (FSW), and the influence of process parameters on formation of weld surface, cross-section morphology and tensile strength were studied. The results show that, Titanium and Aluminum dissimilar alloy is difficult to be joined by FSW, and some defects such as cracks and grooves are easy to occur. When the rotational speed of stir head(n) is 750r/min and 950r/min, the welding speed(v) is 118mm/min or 150mm/min, a good formation of weld surface can be obtained, but the bonding of titanium/aluminum interface in the cross-section of weld joint is bad when n is 750r/min which results in a low strength joint. When n is 950r/min and v is 118mm/min，the strength of the FSW joint of Titanium/Aluminum dissimilar materials is 131MPa which is the highest．

scholarly journals Influence of Mx-Trivex, A-Skew, Three Flat Threaded and Concave Shouldered Mx-Triflute Tool Pin Profiles on Tensile Properties and Fractural Behaviour of Aa 6082-T6 Weldments During Friction Stir Welding

2020 ◽  
Vol 9 (4) ◽  
pp. 1376-1384
Keyword(s):  
Friction Stir Welding ◽  
Tensile Test ◽  
Weld Zone ◽  
Base Material ◽  
Traverse Speed ◽  
Friction Stir ◽  
Tool Pin ◽  
Solid State Joining ◽  
Joining Process ◽  
Brass Wire

Friction Stir Welding (FSW) is a topical and propitious solid-state joining process producing economical and strengthened joints of age-hardened and heat-treatable Aluminium Alloy AA 6082-T6. Mechanical and fractural behaviour of weldments were investigated in order to find crack initiation and necking on the weld zone thereby perceiving the complete behaviour of fracture occurred near the weld zone. Weldments are fabricated by employing four tool pin profiles namely MX-TRIVEX, A-SKEW, Three flat threaded and Concave shouldered MX-TRIFLUTE tools at various rotational speeds 1000 rpm, 1200 rpm and 1400 rpm at single traverse speed 25 mm/min. EXCETEX-EX-40 CNC wire cut EDM with 0.25 mm brass wire diameter has been employed to perform the extraction of tensile test specimens from the weldments according to ASTM E8M-04 standard. Tensile test was performed on elctromechanically servo controlled TUE-C-200 (UTM machine) according to ASTM B557-16 standards Maximum Ultimate Tensile Strength (UTS) of 172.33 MPa (55.5% of base material) and 0.2% Yield Stress (YS) of 134.10 MPa (51.5% of base material) were obtained by using A-SKEW at 1400 rpm, 25 mm/min and maximum % Elongation (%El) of 11.33 (113.3% of base material) was obtained at MX-TRIVEX at 1000 rpm, 25 mm/min. Minimum UTS of 131.16 MPa (42.30% of base material) and 0.2% YS of 105.207 MPa (40.46% of base material )were obtained by using Concave shouldered MX-TRIFLUTE at 1400 rpm, 25 mm/min. Minimum % El of 5.42 ( 54.2% of base material) was obtained by using A-SKEW at 1000 rpm, 25 mm/min.

scholarly journals The Effects of In-Process Cooling during Friction Stir Welding of 7475 Aluminium Alloy

2021 ◽  
Vol 50 (9) ◽  
pp. 2743-2754
Author(s):  
Ashish Jacob ◽  
Sachin Maheshwari ◽  
Arshad Noor Siddiquee ◽  
Abdulrahman Al-Ahmari ◽  
Mustufa Haider Abidi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Welded Joints ◽  
Positive Impact ◽  
Welding Process ◽  
Fusion Welding ◽  
Friction Stir ◽  
Cooling Conditions ◽  
Zero Degree ◽  
Welding Technique

Certain age hardenable alloys such as AA7475 cannot be joined with perfection using fusion welding techniques. This requires non-conventional welding technique such as friction stir welding process to join these ‘difficult to weld’ alloys. In this study, three different cooling conditions i.e. cryogenic, sub-zero, and zero-degree Celsius temperature conditions have been analyzed to understand its impact on the welding process. In-process cooling was found to behave effectively and also enhanced the mechanical properties of the welded joints. A stable microstructure was clearly seen in the images observed under the metallurgical microscope. The weld efficiencies were found to be good in each of the samples which are indicative of a strong metallic joint. The effective cooling conditions employed had an overall positive impact on the joint.

scholarly journals Design and Fabrication of Friction Stir Welding End-Effector for an ABB IRB1410 Robot

2016 ◽  
Vol 5 (2) ◽  
pp. 98
Author(s):  
Santosh Vanama
Keyword(s):  
Friction Stir Welding ◽  
High Strength ◽  
Fusion Welding ◽  
Fusion Temperature ◽  
End Effector ◽  
Friction Stir ◽  
Aluminum Sheets ◽  
Operation Pressure ◽  
Welding Processes ◽  
Tool Rotation

<p>The paper propose modelling and fabrication of friction stir welding end-effector for ABB IRB1410 robot. A dynamically developing version of pressure welding processes, join material without reaching the fusion temperature called friction stir welding. As friction stir welding occurs in solid state, no solidification structures are created thereby eliminating the brittle and eutectic phase’s common to fusion welding of high strength aluminium alloys. In this paper, Friction stir welding is applied to aluminum sheets of 2 mm thickness. A prototype setup is developed to monitor the evolution of main forces and tool temperature during the operation. Pressure of a gripper plays a major role for tool rotation and developing torque.  Fabrication of the tool has done. Force calculations are done by placing the sensors on the outer surface of gripper. Methods of evaluating weld quality are surveyed as well.</p>

scholarly journals Longitudinal Residual Stress Analysis in AA2024-T3 Friction Stir Welding

2013 ◽  
Vol 7 (1) ◽  
pp. 18-26 ◽  
Author(s):  
Pierpaolo Carlone ◽  
Gaetano S. Palazzo
Keyword(s):  
Friction Stir Welding ◽  
Residual Stresses ◽  
Process Parameters ◽  
Material Properties ◽  
Stress Measurement ◽  
Dynamic Performance ◽  
Contour Method ◽  
Influence Of Process Parameters ◽  
Friction Stir ◽  
Longitudinal Residual Stress

Friction Stir Welding (FSW) is an innovative solid-state joining process, which is gaining a great deal of attention in several applicative sectors. The opportune definition of process parameters, i.e. minimizing residual stresses, is crucial to improve joint reliability in terms of static and dynamic performance. Longitudinal residual stresses, induced by FSW in AA2024-T3 butt joints, have been inferred by means of a recently developed technique, namely the contour method. Two approaches to stress measurement have been adopted; the former is based on the assumption of uniform material properties, the latter takes into account microstructural effects and material properties variations in the welding zones. The influence of process parameters, namely rotating and welding speeds, on stress distribution is also discussed.

Superplastic Behavior and Microstructure of Titanium (Ti-6Al-4V) Friction Stir Welds Made under a Variety of Processing Conditions

2010 ◽  
Vol 433 ◽  
pp. 169-176 ◽  
Author(s):  
Paul Edwards ◽  
Mamidala Ramulu ◽  
Daniel G. Sanders
Keyword(s):  
Friction Stir Welding ◽  
Base Material ◽  
Superplastic Forming ◽  
Spindle Speed ◽  
Processing Conditions ◽  
Superplastic Behavior ◽  
Friction Stir ◽  
Fine Grained ◽  
Weld Parameters

Friction Stir Welding of Ti-6Al-4V was performed on 5 mm thickness plate in order to assess the affect of welding conditions on the resulting microstructure and superplastic forming behavior of the joints. A variety of welding conditions were tested and all welds were subsequently Superplastically formed. It was found that the weld parameters do influence the microstructure and degree of superplastic performance of the joints. Spindle speed was found to have the most dominant affect on the resulting microstructure and superplastic forming behavior. Low spindle speed welds lead to fine grained microstructures and highly superplastic welds, relative to the base material, while high spindle speed welds larger grained microstructures and less superplastic welds.

Multiaxial Mechanical Strength of AA-2024-T3 Aluminium Alloy Sheets Joined by Friction Stir Welding Processes

2009 ◽  
Vol 83-86 ◽  
pp. 1243-1250 ◽  
Author(s):  
R.L.L.P. Cerveira ◽  
G. F. Batalha
Keyword(s):  
Friction Stir Welding ◽  
Base Material ◽  
Short Review ◽  
Multiaxial Loading ◽  
Angle Variation ◽  
Friction Stir ◽  
Aa 2024 ◽  
Aeronautical Industry ◽  
Welding Processes ◽  
Joining Process

The aim is to analyze a junction produced by a Friction Stir Welding (FSW) joining process under multiaxial loading, employing a modified Arcan test that allows an angle variation of the loading in order to evaluate the failure of the FSW weldment as compared to the base material. A short review of the earlier studies and relevant theories about the FSW processes and fracture modes I and II under multiaxial loading are presented and were experimentally evaluated for an AA2024-T3 aluminum alloy sheets (t = 1.6 mm) processed by FSW. The results obtained can serve as a basis to compare the junctions made using FSW and conventional joint methods such as rivets (very common practice in the aeronautical industry).

Sign in / Sign up

Export Citation Format

Share Document