Study on the compound transmission mechanism of the curve-face gear based on screw theory

2017 ◽  
Vol 232 (17) ◽  
pp. 3115-3124 ◽  
Author(s):  
Chao Lin ◽  
Yanqun Wei ◽  
Zhiqin Cai
Keyword(s):  
Screw Theory ◽  
Transmission Mechanism ◽  
Tooth Surface ◽  
Design Parameters ◽  
Gear Pair ◽  
Face Gear ◽  
Cylindrical Gear ◽  
Cam Mechanism ◽  
Conjugate Surfaces ◽  
Curve Face

The compound transmission mechanism of curve-face gear is a new type of gear transmission based on the cam mechanism and the curve-face gear pair. It combines the transmission characteristics of the cam mechanism and noncircular bevel gear. When the compound transmission mechanism of curve-face gear is engaged in the meshing transmission, the rotating center of the cylindrical gear is fixed and used as the driving wheel, and the curve-face gear can generate the helical motion around the axis. In this paper, the meshing characteristics and motion laws of the compound transmission mechanism of the curve-face gear are studied based on the theory of screw. Based on the meshing theory of gears, the coordinate system of conjugate surfaces is established, the basic meshing theory and equation are obtained. On this basis, combined with the principle of the cam, the transmission principle is analyzed by the screw theory. The tooth surface equation of the compound transmission mechanism of curve-face gear is deduced based on the meshing theory and the related knowledge of geometry. The motion law of the curve-face gear and the change of the motion law with the change of the basic parameters of the gear pair with different design parameters are calculated and analyzed. An experimental platform is built to verify the law of motion, and the experimental results are compared with the theoretical values. The correctness of the theoretical analysis is verified, which provides a new way for the research of the compound transmission mechanism of the curve-face gear.

scholarly journals The Mathematical Model of Curve-Face Gear and Time-Varying Meshing Characteristics of Compound Transmission

2021 ◽  
Vol 11 (18) ◽  
pp. 8706
Author(s):  
Yanan Hu ◽  
Chao Lin ◽  
Shuo Li ◽  
Yongquan Yu ◽  
Chunjiang He ◽  
...  
Keyword(s):  
Screw Theory ◽  
Point Contact ◽  
Transmission Ratio ◽  
Tooth Surface ◽  
Time Varying ◽  
Gear Pair ◽  
Surface Geometry ◽  
Face Gear ◽  
Meshing Characteristics ◽  
Curve Face

The curve-face gear pair is a new type of gear pair with variable transmission ratio for spatial finite helical motion. In this paper, mathematical models of a new developed curve-face gear were simplified and obtained directly by the standard shaper. The subsequent studies on the curve-face gear compound transmission characteristics were further analyzed by the combinations of the principle of space gearing and screw theory. Firstly, the conjugate tooth surface geometry as well the point contact traces of curve-face gears were derived. Secondly, the geometric relationships between gear pair and the corresponding meshing characteristics were evaluated by several basic geometric elements, including instantaneous screw, axodes, striction curve, and conjugate pitch surface. Based on that analysis, it was found that the tooth contact normal was reciprocal to the instantaneous twist, which demonstrated that the conjugate motion with the desired transmission ratio could be realized in current curve-face gear compound transmission. Moreover, the time-varying slip characteristics of the curve-face gear pair were also revealed, that is, rolling and sliding action coexist at all contact on the tooth surfaces. In brief, this work provided the theoretical basis for following researches on machining curve-face gear with standard shaper.

scholarly journals Tooth bending stress analysis of high speed curve face gear of composite transmission

2021 ◽  
Vol 22 ◽  
pp. 20
Author(s):  
Yongquan Yu ◽  
Chao Lin ◽  
Yanan Hu
Keyword(s):  
High Speed ◽  
Normal Load ◽  
Engineering Application ◽  
Tooth Surface ◽  
Gear Pair ◽  
Bending Stress ◽  
Contact Ratio ◽  
Face Gear ◽  
Cylindrical Gear ◽  
Curve Face

To promote the engineering application of composite transmission of high speed curve face gear, which consists of a cylindrical gear and a high speed curve face gear, the analysis of tooth bending stress should be taken into consideration. High speed curve face gear pair is a new type of curve face gear pair. Combined with the principle of high speed cam and curve face gear pair transmission, it can transfer the axial/rotation composite motion and power between two intersecting shafts. Based on the gear engagement principle, the gear meshing coordinate system was established and the fundamental of the high speed composite transmission was expounded. Combined with the tooth profile equation of generating gear, the tooth surface equation of high speed curve face gear was gained. Tooth force, contact ratio and normal load distribution were calculated. Then the tooth bending stress of high speed curve face gear during the transmission was calculated and analyzed in detail. Influence of basic parameters on tooth bending stress was discussed. Finally, the simulation and measurement experiment of tooth bending stress was carried out. By the comparison analysis of simulation, experiment and theory, the correctness of tooth bending stress calculation method was verified, which has important guiding significance for the further research of high speed curve face gear of composite transmission.

Contact fatigue model and life prediction of the compound motion curve-face gear pair

2020 ◽  
Vol 44 (3) ◽  
pp. 440-451
Author(s):  
Chao Lin ◽  
Peilu Li ◽  
Chunjiang He ◽  
Qingkun Xing
Keyword(s):  
Fatigue Life ◽  
Crack Growth ◽  
Contact Fatigue ◽  
Tooth Surface ◽  
Gear Pair ◽  
Face Gear ◽  
Fatigue Model ◽  
Contact Fatigue Life ◽  
Five Axis ◽  
Curve Face

Different from the common face gear pair fixed rotation motion between intersecting axes, the compound transmission of the curve-face gear is a new motion form, which can convert rotational motion into rotation and movement motion. To solve the contact fatigue life problem of this new motion form gear pair, a new contact fatigue life calculation method of the compound transmission curve-face gear pair was proposed. Based on the space gear engagement principle and the fracture mechanics theory, the theoretical contact fatigue model of the curve-face gear composite transmission was established. Considering that the contact load for every tooth is time-varying in the half-period of the curve-face gear, the contact fatigue life stage of the curve-face gear was divided into crack initiation and crack growth, and the crack growth fatigue life for each tooth was calculated using the finite element method. The curve-face gear pair was processed in the five-axis NC machining center and the compound transmission experiment platform of the curve-face gear was set up to measure the tooth surface dynamic contact stress, and the overall life of the curve-face gear was predicted. The comparison analysis between theoretical and experimental results verified the correctness of the theoretical contact fatigue calculation model.

Research on the Discrete Algorithm of Tooth Surface for a Curve-Face Gear

2019 ◽  
Vol 142 (5) ◽  
Author(s):  
Zhiqin Cai ◽  
Chao Lin
Keyword(s):  
Gear Tooth ◽  
Theoretical Data ◽  
Surface Characteristics ◽  
Tooth Surface ◽  
Gear Pair ◽  
Face Gear ◽  
Distribution Law ◽  
Discrete Algorithm ◽  
Generating Method ◽  
Curve Face

Abstract The curve-face gear pair is a new type of face gear pair with a variable transmission ratio. Concerning the complexity of its tooth surface, based on the coordinate transformation principle and the spatial meshing theory, a discrete algorithm of this tooth surface was proposed. The determination rule of the limiting points on the tooth surface was analyzed by introducing the generating method and tooth surface characteristics of this gear tooth. Through the corresponding limiting angles and the distribution law of the contact line, the gear tooth surface was discretized, and the theoretical data points of the tooth surface were obtained. The variations in gear tooth surface in a meshing cycle and under different parameters were analyzed. By comparing the virtual tooth model and the corresponding rolling experiment, the correctness of the tooth surface discrete algorithm of the curve-face gear was verified.

Analysis of tooth contact and transmission errors of curve-face gear

2016 ◽  
Vol 231 (19) ◽  
pp. 3579-3589 ◽  
Author(s):  
Chao Lin ◽  
Chunjiang He
Keyword(s):  
Contact Line ◽  
Contact Point ◽  
Tooth Surface ◽  
Gear Pair ◽  
Face Gear ◽  
Tooth Contact ◽  
Transmission Errors ◽  
Generating Method ◽  
Mathematical Equations ◽  
Curve Face

The authors have established the mathematical equations for the tooth surface of non-circular gear and curve-face gear based on the external generating method with the same shaper cutter. The paper covers the derivation of contact line on both non-circular gear and curve-face gear, the derivation of contact point on curve-face gear, the transmission functions with errors of alignment, the analysis of transmission errors and the comparison between curve-face gear pair and normal face gear pair. The developed theory is verified by experiment.

scholarly journals Evaluation and Optimization of the Oil Jet Lubrication Performance for Orthogonal Face Gear Drive: Modelling, Simulation and Experimental Validation

Energies ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1935 ◽  
Author(s):  
Yu Dai ◽  
Feiyue Ma ◽  
Xiang Zhu ◽  
Qiao Su ◽  
Xiaozhou Hu
Keyword(s):  
Mathematical Model ◽  
Volume Fraction ◽  
Tooth Surface ◽  
Design Parameters ◽  
Gear Pair ◽  
Face Gear ◽  
Gear Drive ◽  
Lubrication Performance ◽  
Jet Nozzle ◽  
Oil Jet

The oil jet lubrication performance of a high-speed and heavy-load gear drive is significantly influenced and determined by the oil jet nozzle layout, as there is extremely limited meshing clearance for the impinging oil stream and an inevitable blocking effect by the rotating gears. A novel mathematical model for calculating the impingement depth of lubrication oil jetting on an orthogonal face gear surface has been developed based on meshing face gear theory and the oil jet lubrication process, and this model contains comprehensive design parameters for the jet nozzle layout and face gear pair. Computational fluid dynamic (CFD) numerical simulations for the oil jet lubrication of an orthogonal face gear pair under different nozzle layout parameters show that a greater mathematically calculated jet impingement depth results in a greater oil volume fraction and oil pressure distribution. The influences of the jet nozzle layout parameters on the lubrication performance have been analyzed and optimized. The relationship between the measured tooth surface temperature from the experiments and the corresponding calculated impingement depth shows that a lower temperature appears in a situation with a greater impingement depth. Good agreement between the mathematical model with the numerical simulation and the experiment validates the effectiveness and accuracy of the method for evaluating the face gear oil jet lubrication performance when using the impingement depth mathematical model.

Nonrelative sliding of spiral bevel gear mechanism based on active design of meshing line

2018 ◽  
Vol 233 (3) ◽  
pp. 1055-1067 ◽  
Author(s):  
Zhen Chen ◽  
Ming Zeng
Keyword(s):  
Design Method ◽  
Bevel Gear ◽  
Transmission Mechanism ◽  
Tooth Surface ◽  
Design Parameters ◽  
Spiral Bevel Gear ◽  
Bevel Gears ◽  
Gear Mechanism ◽  
Active Design ◽  
Spiral Bevel

In this paper, an active design method of meshing line for a spiral bevel gear mechanism with nonrelative sliding is presented. First, the general meshing line equations for a nonrelative sliding transmission mechanism between two orthogonal axes are proposed based on the active design parameters. Then, parametric equations for contact curves on the drive and driven spiral bevel gears are deduced by coordinate transformation of the meshing line equations. Further to this, parametric equations for the tooth surface of each bevel gear are derived according to the conical spiral motion of a generatrix circle along the calculated contact curves. Finally, a set of numerical examples is presented based on two types of motion equation of the meshing points. Material prototypes are fabricated and experimentally tested to validate the kinematic performance of the functionally designed spiral bevel gear set.

scholarly journals Meshing characteristics of a sphere–face gear pair with variable shaft angle

2019 ◽  
Vol 11 (6) ◽  
pp. 168781401985951 ◽  
Author(s):  
Lei Liu ◽  
Jinzhao Zhang
Keyword(s):  
Gear Tooth ◽  
Transmission Error ◽  
Tooth Surface ◽  
Gear Pair ◽  
Face Gear ◽  
Tooth Contact Analysis ◽  
Contact Points ◽  
Shaft Angle ◽  
Meshing Characteristics ◽  
Curvature Interference

This article presents a sphere–face gear pair by substituting the convex spherical gear for the pinion of a conventional face gear pair. The sphere–face gear pair not only maintains the advantages of the face gear pair with a longitudinally modified pinion but also allows variable shaft angles or large axial misalignments. Meshing characteristics of the proposed gear pair are studied in this article. The mathematical models of the sphere–face gear pair are derived based on machining principles. The tooth contact analysis (TCA) and curvature interference check are conducted for the sphere–face gear pair with variable shaft angles. The loaded TCA is also implemented utilizing the finite element method. The results of numerical examples show that proposed gear pair has the following features. Geometrical transmission error of constant shaft angle or varying shaft angle is zero; contact points of the sphere–face gear set with variable shaft angle are located near the centre region of face gear tooth surface; there is no curvature interference in meshing; and transmission continuity of the gear pair can be guaranteed in meshing.

Bending stress analysis of eccentric straight and helical curve-face gear pair

2019 ◽  
Vol 16 (2) ◽  
pp. 401-414
Author(s):  
Chao Lin ◽  
Wenjie Wei ◽  
Shuang Wang ◽  
Xiguang Xia ◽  
Qingkun Xin
Keyword(s):  
Stress Analysis ◽  
Gear Pair ◽  
Bending Stress ◽  
Face Gear ◽  
Curve Face
Sign in / Sign up

Export Citation Format

Share Document