Investigating the elastic behavior of carbon nanocone reinforced nanocomposites

2020 ◽  
Vol 234 (14) ◽  
pp. 2908-2922
Author(s):  
Bhavik A Ardeshana ◽  
Umang B Jani ◽  
Ajay M Patel ◽  
Anand Y Joshi
Keyword(s):  
Young’S Modulus ◽  
Representative Volume Element ◽  
Volume Fraction ◽  
Young's Modulus ◽  
Volume Element ◽  
Elastic Behavior ◽  
Representative Volume ◽  
Simulation Based ◽  
Load Carrying ◽  
The Matrix

This paper deals with the evaluation of the effective mechanical properties of carbon nanocone centered composites using a 3D nanoscale representative volume element based on continuum mechanics. For extracting the effective material constants, the authors have taken the basis of theories of elasticity. The results constituting the effective Young's modulus of the composite and Poisson's ratio for different parameters stated above have been presented and validated with rule of mixtures. It can be clearly visualized from the results that the load-carrying capacities of carbon nanocones in the representative volume elements are quite significant and the same has been demonstrated with subsequent cases. Simulation-based modeling can show a considerable part in the improvement of carbon nanocone-based composites by providing results that help in appreciative of the performance of composites. Moreover, for a volume fraction of the CNC as 2.33% in a cylindrical representative volume element and a 19.2° apex angle of the cone, the stiffness of the composite can increase as many as 4.9 times of the matrix. Similarly for hexagonal and square, the increase is in terms of 4.3 and 3.01 times respectively. Cylindrical representative volume element is the best as it provides the maximum reinforcement in terms of effective Young's modulus of the composite. Carbon nanocone-based composites provide results that help in understanding the elastic behavior of composites.

Numerical Investigation of the Overall Stiffness of Carbon Nanotube-Based Composite Materials

2011 ◽  
Vol 13 ◽  
pp. 47-59 ◽  
Author(s):  
Seyedmehdi Mavalizadeh ◽  
Moones Rahmandoust ◽  
Andreas Öchsner
Keyword(s):  
Carbon Nanotube ◽  
Young’S Modulus ◽  
Case Studies ◽  
Elastic Properties ◽  
Representative Volume Element ◽  
Volume Fraction ◽  
Young's Modulus ◽  
Volume Element ◽  
Matrix Volume ◽  
The Matrix

In this study, a finite element model of a representative volume element that contains a hollow and filled single-walled Carbon nanotube (SWCNT) in two case studies was generated. It was assumed that the nanocomposites have geometric periodicity with respect to local length scale and the elastic properties can be represented by those of the representative volume element (RVE). Elastic properties in agreement with existing literature values for the Carbon nanotube and the matrix were assigned. Then for the two case studies, the tensile test was simulated to find the effect of the geometry, i.e. the volume fraction of matrix and SWCNT's properties variation, on the effective Young's modulus of the structure. In another approach, by applying perpendicular loading to the tube direction, the effect of matrix volume fraction on the transverse Young's modulus was studied. The investigations showed that for both RVEs with filled SWCNT and hollow SWCNT, the effective Young's modulus of the structure decreases approximately linear as the matrix volume fraction increases. The value of Young's modulus of the RVE with a filled Carbon nanotube was obtained to be higher than the RVE with the hollow Carbon nanotube. In addition, by increasing the tube diameter, the effective Young's modulus of the structure increases and the transverse Young's modulus decreases approximately linear for filled tubes but this parameter remains rather constant in the case of the hollow tube by increasing the matrix volume fraction.

scholarly journals Representative volume element based micromechanical modelling of rod shaped glass filled epoxy composites

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Aanchna Sharma ◽  
Yashwant Munde ◽  
Vinod Kushvaha
Keyword(s):  
Representative Volume Element ◽  
Poisson’S Ratio ◽  
Volume Fraction ◽  
Tensile Modulus ◽  
Volume Element ◽  
Poisson's Ratio ◽  
Epoxy Composites ◽  
Micromechanical Modeling ◽  
Representative Volume ◽  
Shaped Glass

AbstractIn this study, Representative Volume Element based micromechanical modeling technique has been implemented to assess the mechanical properties of glass filled epoxy composites. Rod shaped glass fillers having an aspect ratio of 80 were used for preparing the epoxy composite. The three-dimensional unit cell model of representative volume element was prepared with finite element analysis tool ANSYS 19 using the periodic square and hexagonal array with an assumption that there is a perfect bonding between the filler and the epoxy matrix. Results revealed that the tensile modulus increases and Poisson’s ratio decreases with increase in the volume fraction of the filler. To study the effect of filler volume fraction, the pulse echo techniques were used to experimentally measure the tensile modulus and Poisson’s ratio for 5% to 15% volume fraction of the filler. A good agreement was found between the RVE based predicted values and the experimental results.

Development of Representative Volume Element Homogenization Model for Predicting Transversely Isotropic Elasticity of Lithium-Ion Batteries

2017 ◽  
Vol 139 (4) ◽  
Author(s):  
Jin Chul Yun ◽  
Seong Jin Park
Keyword(s):  
Representative Volume Element ◽  
Lithium Ion ◽  
Transversely Isotropic ◽  
Volume Element ◽  
Elastic Behavior ◽  
Design Stage ◽  
Design Parameters ◽  
Concept Design ◽  
Representative Volume ◽  
Isotropic Elasticity

In this study, a representative volume element (RVE) homogenization approach is proposed to predict the mechanical properties of a lithium-ion battery (LIB) cell, module, and pack in an electric vehicle (EV). Different RVE models for the LIB jellyroll and module are suggested. Various elastic properties obtained from RVE analyses were compared to the analytic solution. To validate the approach suggested, the elastic responses of two types of homogenized LIB module for various loading cases were compared to the model where all the jellyroll and module components were described fully. Additionally, parametric studies were conducted to determine the relationship between design parameters of the jellyroll components and the elastic behavior of LIB jellyroll and module. The results obtained in this study provide useful information for both LIB cell developers, at the concept design stage, and engineers of electric vehicles who want to predict the mechanical safety of a battery pack.

Evaluation of the out-of-plane response of fiber networks with a representative volume element model

TAPPI Journal ◽  
2018 ◽  
Vol 17 (06) ◽  
pp. 329-339 ◽  
Author(s):  
Yujun Li ◽  
Zengzhi Yu ◽  
Stefanie Reese ◽  
Jaan-Willem Simon
Keyword(s):  
Mechanical Behavior ◽  
Representative Volume Element ◽  
Mechanical Response ◽  
Volume Fraction ◽  
Volume Element ◽  
Specimen Thickness ◽  
Fiber Networks ◽  
Representative Volume ◽  
Out Of Plane ◽  
Plane Compression

Many natural and synthetic materials have fibrous microstructures, including nonwoven fabrics, paper, and fiberboard. Experimentally evaluating their out-of-plane mechanical behavior can be difficult because of the small thickness compared with the in-plane dimension. To properly predict such properties, network-scale models are required to obtain homogenized material mechanics by considering fiber-scale mechanisms. We demonstrate a three-dimensional representative volume element (RVE) for fiber networks using the finite element method. We first adopted the classical deposition procedure to generate fiber networks with random or preferential fiber orientations and then an artificial compression to achieve the practical fiber volume fraction. The hollow fibers, described with elastic-plastic brick elements, were joined by interface-based cohesive zone elements introduced in all fiber-fiber contact areas. Thereafter, the fiber networks were subjected to displacement boundary conditions, and their apparent mechanical response was evaluated by a homogenized stress. To determine the RVE dimension, we further conducted an RVE size convergence study for the out-of-plane compression and tension (varying specimen length while keeping the specimen thickness constant). Finally, we evaluated the apparent out-of-plane response of the obtained RVE for four loading cases: out-of-plane compression, tension, simple shear, and pure shear. The results show a quite different mechanical behavior of fiber networks between all these out-of-plane loading cases, particularly between tension and compression.

scholarly journals Study on Macroscopic and Microscopic Mechanical Behavior of Magnetorheological Elastomers by Representative Volume Element Approach

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Shulei Sun ◽  
Xiongqi Peng ◽  
Zaoyang Guo
Keyword(s):  
Magnetic Field ◽  
Mechanical Properties ◽  
Shear Modulus ◽  
Representative Volume Element ◽  
Field Intensity ◽  
Magnetic Field Intensity ◽  
Volume Fraction ◽  
Volume Element ◽  
Magnetorheological Elastomers ◽  
Representative Volume

By using a representative volume element (RVE) approach, this paper investigates the effective mechanical properties of anisotropic magnetorheological elastomers (MREs) in which particles are aligned and form chain-like structure under magnetic field during curing. Firstly, a three-dimensional RVE in zero magnetic field is presented in ABAQUS/Standard to calculate the macroscopic mechanical properties of MREs. It is shown that the initial shear modulus of MREs increases by 56% with a 20% volume fraction of particles compared to that of pure rubber. Then by introducing the Maxwell stress tensor, a two-dimensional plane stress RVE for the MRE is developed in COMSOL Multiphysics to study its response under a magnetic field. The influences of magnetic field intensity, radius of particles, and distance between two adjacent particles on the macroscopic mechanical properties of MRE are also investigated. The results show that the shear modulus increases with the increase of the applied magnetic field intensity and the radius of particles and the decrease of the distance between two adjacent particles in a chain. The predicted numerical results are consistent with theoretical results from Mori-Tanaka model, double inclusion model, and dipole model.

scholarly journals Parametric Study on Volume Fraction of Representative Volume Element (RVE) CFRP and GFRP Towards Tensile Properties

2020 ◽  
Vol 5 (2) ◽  
pp. 17-29
Author(s):  
Ahmad Fuad Ab Ghani
Keyword(s):  
Representative Volume Element ◽  
Volume Fraction ◽  
Volume Element ◽  
Resin Matrix ◽  
Interface Bonding ◽  
Fibre Glass ◽  
Strain Compatibility ◽  
Representative Volume ◽  
Different Types ◽  
Matrix Region

The properties such as fibre content, orientation, dimension of constituent fibres (diameter), level of intermixing of fibres, interface bonding between fibre and matrix, and arrangement of fibres between different types of fibres, influences the mechanical properties of hybrid composite.Representative Volume Element (RVE) for each constituent CFRP and GFRP assumed isotropic behavior for carbon fibre, glass fibre and epoxy resin matrix and assumed to be perfectly bonded interface between fibre and matrix region i.e. strain compatibility at the interface. The scope of study on the micro mechanical modelling via representative volume element (RVE) is limited only to unidirectional composites.

scholarly journals Nonlinear Multi-Scale Finite Element Method to Predict Tensile Behavior of Carbon Nanotube-Reinforced Polymer Composites

2013 ◽  
Vol 26 ◽  
pp. 169-176 ◽  
Author(s):  
Ehsan Mohammadpour ◽  
Mokhtar Awang
Keyword(s):  
Carbon Nanotubes ◽  
Finite Element ◽  
Carbon Nanotube ◽  
Representative Volume Element ◽  
Interfacial Shear ◽  
Tensile Behavior ◽  
Volume Element ◽  
Nonlinear Material ◽  
Representative Volume ◽  
The Matrix

The ability of carbon nanotubes (CNTs) to consider as the strongest and stiffest elements in nanoscale composites remains a powerful motivation for the research in this area. This paper describes a finite element (FE) approach for prediction of the mechanical behavior of polypropylene (PP) matrix reinforced with single walled carbon nanotubes (SWCNTs). A representative volume element is proposed for modeling the tensile behavior of aligned CNTs/PP composites. The CNT is modeled with solid elements. Modified Morse potential is used for simulating the mechanical properties of an isolated carbon nanotube. The matrix is modeled as a continuum medium by utilizing an appropriate nonlinear material model. A cohesive zone model is assumed between the nanotube and the matrix with perfect bonding until the interfacial shear stress exceeds the bonding strength. Using the representative volume element, a unidirectional CNT/PP composite was modeled and the results were compared with corresponding rule-of-mixtures predictions. The effect of interfacial shear strength on the tensile behavior of the nanocomposite was also studied. The influence of the SWCNT within the polymer is clearly illustrated and discussed. The results showed that polymer's Young's modulus and tensile strength increase significantly in the presence of carbon nanotubes.

Property Prediction of Composites with Different Fiber Volume Fractions by Representative Volume Element Method

2013 ◽  
Vol 275-277 ◽  
pp. 1605-1609
Author(s):  
Nan Zhang ◽  
Cheng Hong Duan
Keyword(s):  
Elastic Properties ◽  
Representative Volume Element ◽  
Fiber Volume Fraction ◽  
Empirical Equation ◽  
Volume Fraction ◽  
Volume Element ◽  
Fiber Volume ◽  
Finite Element Software ◽  
Representative Volume ◽  
Properties Of Composites

In this paper, a representative volume element (RVE) model of composites with different fiber volume fraction is established by ANSYS finite element software. The stiffness matrix of the RVE model can be calculated by studying its stress field, and then the elastic properties of composites could be obtained. By comparing with the results from NASA empirical equation, the reliability of the method can be proved. This is a new way to predict the elastic properties of composites.

Modeling and Analysis the Effect of Helical Carbon Nanotube Morphology on the Mechanical Properties of Nanocomposites Using Hexagonal Representative Volume Element

2014 ◽  
Vol 577 ◽  
pp. 3-6
Author(s):  
Minh Tai Le ◽  
Shyh Chour Huang
Keyword(s):  
Mechanical Properties ◽  
Finite Element Method ◽  
Representative Volume Element ◽  
Theory Of Elasticity ◽  
Volume Element ◽  
Modeling And Analysis ◽  
New Class ◽  
Representative Volume ◽  
The Matrix ◽  
Effective Mechanical Properties

Carbon nanotubes (CNTs) are the ultimate reinforcing materials for the development of an entirely new class of composites. However, they have the complicated shapes and do not usually appear as straight reinforcements when introduced in polymer matrices. This decreases nanotube’s effectiveness in enhancing the matrix mechanical properties. In this paper, nanostructure having hexagonal representative volume element (RVE), theory of elasticity of anisotropic materials and finite element method (FEM) are used to investigate the effect of helical CNT morphology on effective mechanical properties of nanocomposites. CNT with different helical angles are modeled to estimate the nanocomposite mechanical properties. The results of helical nanotube models are compared with the effective mechanical properties of nanocomposites reinforced with straight nanotubes.

scholarly journals A Study on the Mechanical Properties of the Representative Volume Element in Fractal Porous Media

Geofluids ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Jianjun Liu ◽  
Mingyang Wu ◽  
Zhengwen Zhu ◽  
Zuliang Shao
Keyword(s):  
Mechanical Properties ◽  
Porous Media ◽  
Fractal Dimension ◽  
Representative Volume Element ◽  
Mechanical Response ◽  
Volume Element ◽  
Structure Generation ◽  
Matrix Mechanics ◽  
Representative Volume ◽  
The Matrix

Natural porous structure is extremely complex, and it is of great significance to study the macroscopic mechanical response of the representative volume element (RVE) with the microstructure of porous media. The real porous media RVE is generated by an improved quartet structure generation set (QSGS), and the connectivity of the reconstructed porous media models is analyzed. The fractal dimension of the RVE is calculated by the box-counting method, which considers the different porosity, different fractal dimension, and different mechanical properties of the matrix. Thus, the stress-strain curves of the RVE in the elastoplastic stage under different conditions are obtained. The results show that when the matrix mechanics are consistent, the mechanical properties of the porous media RVE are negatively correlated with the porosity and fractal dimension; when the difference between the porosity and fractal dimension increases, the trend is more obvious. The mechanical properties of the RVE have a positive correlation with the modulus of elasticity of the matrix, though the correlation with Poisson’s ratio of the matrix is weak. The fractal dimension of complex porous media can better predict the RVE mechanical characteristics than the porosity.

Sign in / Sign up

Export Citation Format

Share Document