State estimation and damping control for unmanned ground vehicles with semi-active suspension system

2019 ◽  
Vol 234 (5) ◽  
pp. 1361-1376
Author(s):  
Taipeng Wang ◽  
Sizhong Chen ◽  
Hongbin Ren ◽  
Yuzhuang Zhao
Keyword(s):  
Kalman Filter ◽  
Feedback Linearization ◽  
Sliding Mode ◽  
Suspension System ◽  
Estimation Accuracy ◽  
Sliding Mode Controller ◽  
Damping Force ◽  
Car Suspension ◽  
Linear Observer ◽  
Suspension Model

The new type of transportation based on intelligent driverless vehicles will bring great changes to people’s travel modes and put forward higher requirements for the ride comfortability of vehicles. This paper presents a new observing algorithm to estimate the suspension states in real time and cooperate with sliding mode controller to improve the ride comfortability. First, the nonlinear model of an air suspension system equipped with a continuously controllable damper is described in detail. Then, this nonlinear suspension model is linearized precisely based on the differential geometry theory; a linear Kalman filter observer is implemented for this linearized model; through the coordinate reverse transformation, the designed linear observer is transformed into a nonlinear one, which will be suitable for the original nonlinear system, so that, the proposed state observer can estimate all the states of the nonlinear quarter car suspension system. Then, in this nonlinear suspension system, a model reference sliding mode controller is designed to continuously control the damping force to improve the ride comfortability. Finally, the effectiveness and advantage of the proposed feedback linearization Kalman observer is illustrated by comparing with a traditional extended Kalman filter observer. The simulation research shows that the proposed feedback linearization observer enjoys a better estimation accuracy, higher operation efficiency, and greater control performance while cooperating with the sliding mode controller in ride comfortability control.

Adaptive fault-tolerant control for active suspension systems based on the terminal sliding mode approach

2019 ◽  
Vol 234 (2) ◽  
pp. 501-511
Author(s):  
Amirhossein Kazemipour ◽  
Alireza B Novinzadeh
Keyword(s):  
Control Strategy ◽  
Control Method ◽  
Fault Tolerant ◽  
Sliding Mode ◽  
Fault Tolerant Control ◽  
Active Suspension ◽  
Suspension System ◽  
Terminal Sliding Mode ◽  
Car Suspension ◽  
Suspension Model

In this paper, a control system is designed for a vehicle active suspension system. In particular, a novel terminal sliding-mode-based fault-tolerant control strategy is presented for the control problem of a nonlinear quarter-car suspension model in the presence of model uncertainties, unknown external disturbances, and actuator failures. The adaptation algorithms are introduced to obviate the need for prior information of the bounds of faults in actuators and uncertainties in the model of the active suspension system. The finite-time convergence of the closed-loop system trajectories is proved by Lyapunov's stability theorem under the suggested control method. Finally, detailed simulations are presented to demonstrate the efficacy and implementation of the developed control strategy.

Sliding Mode Control for Magneto-Rheological Vehicle Suspension Accounting for its Nonlinearity

2013 ◽  
Vol 433-435 ◽  
pp. 1072-1077
Author(s):  
Yu Lin Zhang
Keyword(s):  
Ride Comfort ◽  
Sliding Mode ◽  
Linear Feedback ◽  
Sliding Mode Controller ◽  
Suspension Systems ◽  
Numerical Result ◽  
Car Suspension ◽  
System Nonlinearity ◽  
Magneto Rheological ◽  
Suspension Model

The non-linear characteristics of magneto-rheological (MR) suspension systems have limited control performance of modern control theory based on linear feedback control. In this paper, a four DOF half car suspension model with two nonlinear MR dampers is adopted. In order to account for the nonlinearity, a sliding mode controller, which has inherent robustness against system nonlinearity, is formulated to improve comfort and road holding of the car under industrial specifications and it is fit to semi-active suspensions. The numerical result shows that the semi-active suspension using the sliding mode controller can achieve better ride comfort than the passive and also improve stability.

The Simulation Analysis of Semi-Active Suspension System in Vehicle Based on Sliding Mode Control with Varying Structure

2011 ◽  
Vol 216 ◽  
pp. 96-100
Author(s):  
Jing Jun Zhang ◽  
Wei Sha Han ◽  
Li Ya Cao ◽  
Rui Zhen Gao
Keyword(s):  
Control Method ◽  
Simulation Analysis ◽  
Reference Model ◽  
Sliding Mode ◽  
Tracking Error ◽  
Active Suspension ◽  
Suspension System ◽  
Sliding Mode Controller ◽  
Error Dynamics ◽  
Dynamic Quality

A sliding mode controller for semi-active suspension system of a quarter car is designed with sliding model varying structure control method. This controller chooses Skyhook as a reference model, and to force the tracking error dynamics between the reference model and the plant in an asymptotically stable sliding mode. An equal near rate is used to improve the dynamic quality of sliding mode motion. Simulation result shows that the stability of performance of the sliding-mode controller can effectively improve the driving smoothness and safety.

Performance analysis of MR damper based semi-active suspension system using optimally tuned controllers

2021 ◽  
pp. 095440702110044
Author(s):  
Gurubasavaraju Tharehalli mata ◽  
Vijay Mokenapalli ◽  
Hemanth Krishna
Keyword(s):  
Pid Controller ◽  
Ride Comfort ◽  
Sliding Mode ◽  
Dynamic Performance ◽  
Parametric Method ◽  
Mr Damper ◽  
Active Suspension ◽  
Suspension System ◽  
Sliding Mode Controller ◽  
Road Excitation

This study assesses the dynamic performance of the semi-active quarter car vehicle under random road conditions through a new approach. The monotube MR damper is modelled using non-parametric method based on the dynamic characteristics obtained from the experiments. This model is used as the variable damper in a semi-active suspension. In order to control the vibration caused under random road excitation, an optimal sliding mode controller (SMC) is utilised. Particle swarm optimisation (PSO) is coupled to identify the parameters of the SMC. Three optimal criteria are used for determining the best sliding mode controller parameters which are later used in estimating the ride comfort and road handling of a semi-active suspension system. A comparison between the SMC, Skyhook, Ground hook and PID controller suggests that the optimal parameters with SMC have better controllability than the PID controller. SMC has also provided better controllability than the PID controller at higher road roughness.

scholarly journals A New Control Strategy for Bi-directional DC/DC Converter in DC Microgrid

2021 ◽  
Vol 233 ◽  
pp. 01051
Author(s):  
Tianze Miao ◽  
Xiaona Liu ◽  
Siyuan Liu ◽  
Lihua Wang
Keyword(s):  
Steady State ◽  
Control Strategy ◽  
Feedback Linearization ◽  
Sliding Mode ◽  
Response Speed ◽  
Fast Response ◽  
Sliding Mode Controller ◽  
Exponential Approximation ◽  
Dc Microgrid ◽  
Simulation Results

The bi-directional DC / DC converter in DC microgrid is a typical nonlinear system which has large voltage disturbance during lead accumulator charging and discharging. In order to solve the problem of voltage disturbance, the linearization of the converter is realized by exact feedback linearization, and the sliding mode controller is designed by using exponential approximation law. The simulation results show that the method has fast response speed, strong anti-interference ability and good steady-state characteristics.

Design and analysis of an integrated sliding mode control–two-point wheelbase preview strategy for a semi-active air suspension with stepper motor-driven gas-filled adjustable shock absorber

2018 ◽  
Vol 232 (9) ◽  
pp. 1194-1211 ◽  
Author(s):  
Jing Zhao ◽  
Pak Kin Wong ◽  
Xinbo Ma ◽  
Zhengchao Xie
Keyword(s):  
Sliding Mode Control ◽  
Shock Absorber ◽  
Sliding Mode ◽  
Single Point ◽  
Rear Wheel ◽  
Suspension System ◽  
Stepper Motor ◽  
Damping Force ◽  
Mode Control ◽  
Air Suspension

This article proposes an integrated sliding mode control–two-point wheelbase preview strategy for semi-active air suspension system with gas-filled adjustable shock absorber. First of all, a vehicle suspension model with rolling lobe air spring and gas-filled adjustable shock absorber is built, following with a road input model for the front wheel. By describing the detailed structure and working process of the gas-filled adjustable shock absorber, the regulating mechanism between the stepper motor and the designed gas-filled adjustable shock absorber is established. Subsequently, the sliding mode control algorithm is applied to generate the desired damping force with the real-time state of the vehicle. Moreover, to predetermine the road profile for the rear wheel, a two-point wheelbase preview approach is proposed and its superiority is also illustrated as compared with the conventional single-point wheelbase preview approach. To evaluate the performance of the proposed system, numerical analysis is conducted with other three comparative schemes, namely, passive suspension system, active suspension system with H infinity control, and sliding mode control–controlled semi-active air suspension system with adjustable shock absorber. Simulation results show that the integrated sliding mode control–two-point wheelbase preview strategy can be successfully utilized in the semi-active air suspension system with stepper motor-driven gas-filled adjustable shock absorber, and the vehicle performance with the proposed system can be greatly improved.

Sign in / Sign up

Export Citation Format

Share Document